12V Dc Usb

funkcijos Nešiojamas 230 V kintamosios srovės sieninis lizdas Avarinis atsarginės energijos sprendimas Ekstremali akumuliatoriaus talpa Tylus kuro generatoriaus pakeitimas Techniniai duomenys Ličio jonų akumuliatoriaus talpa: 14,4 V / 20 Ah / 288 Wh (3,6 V / 80 000 mAh / 288 Wh) 1 x AC EU sieninis lizdas: 230 V kintamoji srovė, 50 Hz (maks. 300 W) 1 x DC prievadas (5521) įvestis: 5V-20V/5A (maks. 100W) 2 x DC prievadas (5521) išėjimas: 12V/10A (maks. 120W) 2 x USB-A išvestis: 5V/2.1A 1 x USB-A išvestis: QC 5V/3A, 9V/2A, 12V/1.5A (maks. 18W) 1 x USB-C PD įvestis / išvestis: 5 V / 2,4 A, 9 V / 3 A, 12 V / 3 A, 15 V / 3 A, 20 V / 5 A (maks. 100 W) 1 x lempa su balta šviesa, 7W/840 liumenų (maks.) 1 x įmontuotas ventiliatorius Matmenys (P x A x G): 22,5 x 21,5 x 12 cm Svoris: 2,9 kg Įkrovimo ir iškrovimo temperatūra: -10~45°C Laikymo temperatūra: -20~50°C Rinkinyje: 1 Sandberg elektrinė AC 300 1 kintamosios srovės įkroviklis, įvestis AC 230V, išėjimas DC 15V/4A (60W), EU jungtis 1 Adapterio DC-5521 kištukas prie automobilio cigarečių degiklio lizdo, maks. 10A, ilgis 30 cm 1 Trumpas vadovas

LOKITHOR J5000 PRO 99.84Wh 5000A Jump StarterThe LOKITHOR J5000 PRO is an advanced jump starter offering a high peak current of 5000A, capable of starting gasoline engines up to 12.0L and diesel engines up to 10.0L. Equipped with a modern 99.84Wh LiFePO4 battery, it ensures long service life, high stability, and safe operation. Thanks to CONNECTMAX technology, the device automatically optimizes the connection to the battery, and 100W PD fast charging allows for a full charge in just 60 minutes. This versatile solution combines the functions of a booster, power bank, and LED flashlight, offering reliability in any situation.Wide range of applicationsThe device generates a 5000-amp starting current, allowing it to start a wide range of vehicles—from passenger cars to larger machinery used on farms, construction sites, or in ports. Thanks to its high performance, it works well in both everyday use and demanding off-road conditions.Durable LiFePO4 battery and CONNECTMAX technologyThe LiFePO4 battery used features high chemical stability and a long service life, offering over 2,000 cycles at full discharge and up to 8,000 cycles at 50%. This solution significantly outperforms traditional batteries in terms of durability and safety. CONNECTMAX technology automatically detects resistance at the terminals and adjusts operating parameters, ensuring a reliable start even with dirty or corroded terminals.Fast charging and power bank functionThe J5000 PRO model supports bidirectional 100W PD fast charging, allowing the device to be fully charged in about 60 minutes. Thanks to USB-C and USB-A ports and a 12V DC output, it is possible to charge various devices, such as smartphones, laptops, or other electronic accessories, making the device a practical power source on the go.Advanced safety features and clear diagnosticsThe device is equipped with 10 protection systems that safeguard against sparking, reverse polarity, overheating, short circuits, and overcharging. The built-in display and message system provide information on operating status, errors, and incorrect connections, simplifying operation and enhancing safety.Weather resistance and robust constructionThe IP65-rated housing protects the device from dust and splashes, allowing for safe use in harsh conditions. The booster operates in a wide temperature range from -20°C to 60°C, making it suitable for use in both winter and hot weather.Additional featuresThe device also functions as a 99.84Wh power bank and is equipped with a 400-lumen LED flashlight featuring SOS and strobe modes. Low self-discharge rate (0.46 mAh) allows it to remain ready for use for up to 46 months. Operation is intuitive—standard mode enables quick startup, while BOOST mode allows you to start the vehicle even with a severely discharged battery.Compact designThe device measures 27.10 × 9.60 × 21.18 cm and is designed for convenient storage. The set includes USB-A to USB-C cables, USB-C to USB-C cables, a 12V DC cable, a carrying case, and a user manual, so the product is ready to use right out of the box.Included Jump starter USB-A to USB-C cable USB-C to USB-C cable 12V DC charging cable Accessory storage bag Manufacturer LOKITHOR Model J5000 PRO Voltage compatibility 12V Battery capacity 99.84Wh (7800 mAh) Battery type LiFePO4 Peak current 5000 A Operating temperature -20°C to 60°C (-4°F ~ 140°F) Lifespan 8000 cycles (at 50% discharge) AC/DC Input Voltage USB-C 100W Charging Output USB-C, USB-A, DC 12V Maximum Vehicle Fuel Tank Capacity Gasoline ≤ 12.0L, Diesel ≤ 10.0L IP Rating IP65 USB-A (Output) 12V / 1.5A 18W USB-C (input/output) 20V / 5A, max 100W DC output 12V / 10A LED flashlight 400 lumens, SOS / Strobe mode Standby time 46 months (0.46 mAh self-discharge) Dimensions 27.1 × 9.6 × 21.2 cm (10.67" D x 3.78" W x 8.34" H)

The Lilliput V7 is a 7" 1920×1200 4K HDMI monitor with Voice Control (hands-free waveform, LUTs, false color), 450 nits, 100% BT.709, HDMI 2.0 in/loop-out, USB-C PD power, NP-F battery plate and pro tools. Ultra-thin 25 mm, 320 g—perfect for gimbal, handheld, and on-set use. The Lilliput V7 7-inch 4K HDMI Voice Control Camera Monitor revolutionizes on-set monitoring with hands-free voice commands (≤1 m, ≥50 dB): switch waveforms, false color, peaking, load 3D LUTs, or adjust settings without touching the screen—ideal for gloved hands, sterile environments, or one-person crews. Its 1920×1200 IPS panel delivers 450 nits brightness, 1200:1 contrast, 160° viewing angles, and 100% BT.709 color space with HDR HLG/ST2084 (300/1000/10000) support for accurate exposure and color in any light. HDMI 2.0 input/loop-out handles up to 4K60 cleanly, while built-in tools include waveform, vectorscope, histogram, false color, zebra, focus peaking, anamorphic de-squeeze, and 8-channel audio meters. Power options are ultra-flexible: DC 7–24 V barrel, USB-C PD (5V/9V/12V/15V/20V), or Sony NP-F batteries (plate included). At just 25 mm thick and 320 g, with full metal housing and 1/4"-20 mounts on three sides, it’s perfect for gimbals, shoulder rigs, or director cages. The V7 is the ultimate compact, voice-activated field monitor for RED, ARRI, Sony FX, and Blackmagic shooters. Key Features: Voice Control (≤1 m): “Show waveform”, “False color”, “Load LUT 1”, “Peaking on”, etc. 7" 1920×1200 IPS, 450 nits, 1200:1, 100% BT.709, HDR HLG/ST2084 HDMI 2.0 in + loop-out (4K60, 1080p120 compatible) Full pro toolset: waveform, vectorscope, histogram, false color, zebra, peaking, audio meters 3D LUT import (USB-C), anamorphic de-squeeze (1.3x–2.0x) Power: USB-C PD, DC 7–24 V, or NP-F battery plate Ultra-thin 25 mm metal body, 320 g, 3× 1/4"-20 mounts 3.5 mm headphone jack + built-in speaker Model: Lilliput V7 Panel: 7" IPS, 1920×1200 (16:10) Brightness: 450 cd/m² Contrast: 1200:1 Viewing Angle: 160°/160° (H/V) Color Space: 100% BT.709 HDR: HLG / ST2084 (300/1000/10000) Input: 1× HDMI 2.0 (4K60) Output: 1× HDMI 2.0 loop-through Audio: 8-ch HDMI embedded, 3.5 mm headphone Power Consumption: ≤14 W Power Input: DC 7–24 V (barrel), USB-C PD (5–20 V), NP-F battery plate Operating Temp: 0–50 °C Dimensions (L×W×D): 186.2 × 121 × 25 mm Weight: 320 g Mounting: 3× 1/4"-20 (left, right, bottom)

MINI PC GMKtec G3S Intel N95 8GB RAM + 256GB SSD WIN 11 PROGMKtec G3S is an energy-efficient computer with huge capabilities enclosed in a small form factor. It is powered by a quad-core Intel N95 processor (up to 3.4 GHz, 6 MB Cache) and integrated Intel UHD graphics (up to 1200 MHz), which together guarantee smooth and stable operation both in the office and at home. The device supports dual 4K monitors via HDMI 2.0, offers 8GB of DDR4 memory and a high-speed 256GB SSD, with M.2 slots to expand space up to 8TB. Built-in WiFi 5, Bluetooth 5.0, as well as Wake On LAN and Auto Power On functions ensure convenience of use and reliable connection in any situation. The device runs on Windows 11 Pro, while remaining compatible with Windows 10, Linux and Ubuntu. A cooling system with a quiet fan maintains optimal operating temperatures without annoying noise.Powerful Intel Alder Lake N95 processorThe GMKtec G3S Mini PC uses a quad-core Intel Alder Lake N95 processor, clocked at up to 3.4 GHz and equipped with 6 MB of cache. The unit, with a TDP of 15 watts, ensures high energy efficiency, and in the Geekbench 6 (Multi-Core) test it reaches 2902 points, clearly outperforming the N97, N200 or Celeron N5095 chips. With this power, the computer easily handles everyday tasks, office applications and high-quality multimedia, while maintaining smooth operation and system stability.Fast and stable connectivityDual-band Wi-Fi 5 (2×2 2400 Mbps) support ensures high data transfer speeds and stable wireless connection, while the built-in RJ45 Gigabit LAN 1000 Mbps port enables wired networking without lag. The device also supports Bluetooth 5.0, which offers three times the transmission speed, range and noise immunity of the 4.2 version, making the mini PC great for office work, peripheral use or transferring files between devices.High memory performance and great expandabilityThe computer offers 8GB of DDR4 SODIMM memory, guaranteeing fast system performance and smooth switching between applications. A 1TB M.2 2242 SSD is provided for user data, which can be easily replaced or expanded. The design of the device supports two independent storage media - M.2 2280 PCIe (up to 8 TB) and M.2 2242 SATA (up to 2 TB). Thanks to the well-thought-out design, installation of an additional drive is quick and requires no special tools.High availability of ports and wide compatibilityThe device provides full freedom of connections. There are two HDMI ports (4K@60 Hz) for simultaneous operation on two monitors, as well as two USB 3.2 and one USB 2.0 ports for accessories and storage media. A stable network connection is provided by an RJ45 2.5G LAN port, while a 3.5mm audio jack allows you to connect headphones or speakers. The whole is complemented by a DC 12V / 3A power port. This makes the computer compatible with monitors, TVs, projectors, printers, audio devices and NAS servers, creating a versatile work and entertainment station.4K image and dual-screen operationThe integrated Intel UHD graphics chip enables smooth multimedia playback and comfortable high-definition work. Thanks to two HDMI 2.0 ports, the computer simultaneously supports two monitors in 4K@60 Hz quality, which allows you to efficiently manage your workspace and conveniently use multiple applications at the same time. Such a solution works well for office work, as well as for photo editing, video editing or data analysis.Thoughtful design and effective coolingThe compact GMKtec G3S chassis was designed with performance and reliability in mind. Inside, it uses high-end components, including 8GB DDR4 memory, high-speed M.2 2280 PCIe (up to 8TB) and M.2 2242 SATA (up to 2TB) drives, as well as Wi-Fi 5 and Bluetooth 5.0 connectivity modules. A cooling system with a fan and numerous vents effectively dissipates heat, ensuring stable operation even under higher loads. The whole is enclosed in a solid, modern-finished case with a minimalist design. Thanks to its compact dimensions, the computer

IMOU Kit-Pro WiFi CCTV Surveillance KitThe IMOU Kit-Pro is a surveillance system featuring 4 IMOU Bullet 2C cameras and a Wi-Fi NVR, designed for quick setup without complicated installation. The cameras record video in 1080p Full HD (2 MP) quality, and automatic pairing takes about 120 seconds, making setup simple and requiring no advanced technical knowledge. The built-in 1 TB hard drive lets you start recording right away, and H.265 compression allows you to store more footage without quickly filling up the storage. With a Wi-Fi range of up to 100 m in open space and an IP67 rating, the set works well both indoors and outdoors.Detailed image and wide field of viewThe cameras use a 1/2.8" 2 MP Progressive CMOS sensor and capture images at a resolution of 1920 × 1080. A viewing angle of 102° horizontally, 54° vertically, and 120° diagonally allows for coverage of a wide area without the need to install additional devices. Smooth recording at up to 25/30 fps ensures a clear image, which is important for event analysis.Monitoring Even After DarkNight vision with a range of up to 30 meters allows you to monitor the surroundings even in the dark. This makes the system ideal for locations requiring constant surveillance—regardless of the time of day.Stable Connection and Quick SetupIEEE802.11 b/g/n (2.4 GHz) connectivity and dual antennas ensure stable system operation. A range of up to 100 meters in open space gives you the freedom to place cameras wherever you need them. Automatic pairing simplifies setup and reduces the need for manual configuration.Practical featuresThe system detects motion and sends notifications to your phone, allowing you to quickly check the event. Features such as a recording schedule and playback of footage from all channels are also available. The cameras have a built-in microphone and support microSD cards with a capacity of up to 256 GB, allowing for additional recording directly on the device.Efficient recording and greater capacityThe recorder uses H.265/H.264 compression, which helps reduce disk space usage. The built-in 1 TB hard drive enables long-term storage of recordings, and support for storage media up to 8 TB via the SATA port allows for expansion. Recording speeds of up to 40 Mbps (wired connection) and 16 Mbps via Wi-Fi ensure stable system operation.Functional recorder and remote accessThe recorder is equipped with HDMI and VGA ports (up to 1080P), an RJ-45 network port (10/100 Mbps), RCA In and RCA Out connectors, and 2 USB 2.0 ports. It supports OSD functions, various recording modes (manual, alarm, schedule), and backup via USB or the network. Cloud access allows for live viewing and playback of recordings from anywhere.Included: Camera x4 Wi-Fi NVR (with built-in 1 TB HDD) Quick Start Guide General (cameras and NVR) Manufacturer IMOU Model CCTV Kit-Pro General (camera) Power supply DC 12V/0.5A Power consumption < 3.5 W Dimensions 147.7 mm x 74.2 mm x 74.2 mm Camera Image sensor 1/2.8" 2 Megapixel Progressive CMOS Resolution 2MP (1920 x 1080) Night vision Range 30 m (98 ft) Field of view 102° (H), 54° (V), 120° (D) Video and audio (camera) Video compression H.265/H.264 Frame Rate Up to 25/30 fps Microphone Built-in Network (Camera) Ethernet 1 x 100 Mbps Ethernet port Wi-Fi IEEE802.11b/g/n, dual antennas Additional Interfaces (Camera) Micro SD Card Supports up to 256 GB Reset button Yes General (recorder) Power supply DC 12V/1.5A Power consumption ≤ 10 W (without hard drive) Dimensions 260 mm x 248 mm x 48 mm Video and audio (recorder) Input Supports 4 channels Video compression H.265/H.264 Decoding capability 4 channels at 1080P 25 fps Recording speed 40 Mbps for wired connection, 16 Mbps for Wi-Fi Display VGA, HDMI (resolution up to 1080P) Features (recorder) OSD Camera name, time, camera lock, motion detection, recording Recording mode Manual, alarm, motion detection, schedule Video motion detection Yes Playback synchronization All channels Backup mode USB device / network Network

F700 7" Overview MonitorThe F700 Overview Monitor is a 7" Full HD touchscreen display that is ideal for professional video applications. With an impressive resolution, brightness of up to 2,000 nits and a wide 160° viewing angle, the image remains clear and readable even in bright sunlight, without the need for a sun visor. The monitor supports automatic and manual backlight adjustment, which ensures comfort regardless of the working conditions. The F700 is a reliable tool for any filmmaker, which significantly improves the efficiency of work and the quality of shots - both in the studio and in the field.Comprehensive monitoring functionsThe F700 is equipped with a range of professional tools to support exposure, focus and frame composition, such as False Color, histogram, vectorscope, Focus Peak, safety markers and audio bar. You also gain the ability to upload up to 60 of your own 3D LUT files (and use 15 uploaded ones) for quick color correction in the field. REC-709-compliant calibration guarantees accurate color reproduction and high detail. With a resolution of 1920 x 1080 and a brightness of 2,000 nits, the displayed image is always clear and legible.4K signal support and user-friendly interfaceAn advanced interface and support for HDMI Loop In & Out (up to 4K) ensure smooth operation in a variety of shooting scenarios. The monitor supports a wide range of video signal resolutions and offers a 3.5mm headphone output for simultaneous audio monitoring (headphones not included). What's more, shortcut buttons (F1, F2, F3) allow quick access to the most important functions.Flexible power supply and mobilityThe monitor can be powered in several ways - with an NP-F battery (F550, F750, F970), a 12V/3A power adapter or via a USB-C port. Two NP-F750 rechargeable batteries with 4400 mAh capacity are included, providing a total of up to 4.8 hours of operation. In addition, the F700 can act as a battery to power the camera (DC 8V/1.5A), making it ideal for outdoor shooting.Freedom of mounting and active coolingThanks to the 1/4" mounting threads on the bottom and side and the included cold-shoe mount, the monitor can be easily adapted to various configurations. The mount allows 180° adjustment, and a fan cooling system with four modes (auto, low, medium, high) ensures stable operation even during long shooting sessions.Included monitor monitor mount USB to Type-C charging cable HDMI to HDMI cable HDMI to Micro HDMI cable HDMI to Mini HDMI cable user manual Manufacturer Neewer Model F700 Resolution 1920x1080 Dot spacing 0.0804 (H) x 0.0804 (W) (mm) Aspect ratio 16:9 Brightness 2000nit ±10% Contrast ratio 1000:1 Viewing angle >160°H/160°V; 80°/80°(L/R) 80°/80°(U/D) Input HDMI Output HDMI, 3.5mm headphone jack Power input/output DC 5.5mm input interface: DC 12-26V (cannot be used as a replacement battery when output voltage is low); DC 2.5mm output interface: DC 8.4V (you can connect the power cable to the camera via the DC power output interface, which greatly extends the battery life of the camera); Type-C input interface: Supports fast chargers 5V/3A and higher or portable chargers (3A output) Support for HDMI input formats 480i, 576i, 480p, 576p, 720p (60/59.94/50/30/29.97/25/24/23.98), 1080i (60/59.94/50), 1080p (60/59.94/50/30/29.97/25/24/24SF/23.98/23.98sF), 3840x2160 (30/25/24Hz), 4096x2160 (25/24Hz). Total power consumption ≤22W (without DC 8.4V output) Operating temperature -20°C-55°C Storage temperature -30°C-65°C Dimensions 175 x 107 x 25 mm

LOKITHOR J403HD 64,000mAh 10,000A Jump StarterThe LOKITHOR J403HD is an advanced 12V jump starter that combines the functions of a jump starter and a high-capacity power bank. With a capacity of 236.8 Wh (64,000 mAh) and a maximum peak current of 10,000 A, it can start gasoline and diesel engines with a displacement of up to 16 liters. The Li-Po battery ensures a long service life exceeding 1,000 cycles, and a full charge takes approximately 2–3 hours. ConnectMax technology, along with advanced safety features, protects against short circuits, overheating, and reverse polarity, ensuring safe use in all conditions.Reliable starting powerThe J403HD model is designed for demanding applications. A peak current of 10,000 A allows for quick starting of a wide range of vehicles—from passenger cars to trucks and machinery with large engines. The device performs well in both everyday use and emergency situations.Fast and Versatile ChargingA wide range of ports allows for convenient powering of various electronic devices. The USB-C input supports 5V/3A, 9V/3A, 12V/3A, 15V/3A, and 20V/5A profiles (max. 100W), as well as a 5–20V/5A DC input. Users have access to USB-A ports with 18W QC fast charging, USB-C ports with up to 100W, and a 12.8–16.8V/10A DC output, allowing you to charge smartphones, laptops, and other mobile devices.Built-in 400 lm LED flashlightThe integrated 400-lumen flashlight facilitates work after dark and enhances safety during roadside breakdowns. This practical solution is also useful while traveling, camping, or working in the field.Operation in harsh conditions and safetyThe device is designed to operate in a wide temperature range—from -20°C to 60°C—while charging is possible between 0°C and 45°C. The IP65 rating protects the device from dust and splashes, allowing it to be used in demanding environments. A durable housing and sturdy clamps (red positive and black negative) ensure a stable and secure connection to the battery. The well-thought-out design makes the device easy to use and ready to go whenever needed.Included jump starter jumper cables with clamps USB-A to USB-C cable USB-C to USB-C cable 12V car cigarette lighter adapter Manufacturer LOKITHOR Model J403HD Voltage compatibility 12V Battery type Li-Po Capacity 236.8 Wh (64,000 mAh) Peak current 10,000 A Supported engines Gasoline and diesel up to 1.6L Power up to 100 W LED flashlight 400 lumens Fast charging USB-C up to 100W Charging outputs USB-A up to 18W, USB-C up to 100W, DC 12.8–16.8V/10A Power bank function Yes Safety system Yes, multi-level protection (including against overheating, short circuits, and reverse polarity) Charging time Approximately 2–3 hours Operating temperature -20°C to 60°C Charging temperature 0°C to 45°C Storage temperature -20°C to 50°C Protection rating IP65

LOKITHOR J701HD 56,000 mAh 4,000A Jump StarterThe Lokithor J701HD from the Heavy Duty series is an advanced 24V jump starter designed for demanding users and large engines. With a high peak current of 4,000A and a capacity of 207.2 Wh, it easily starts gasoline and diesel engines with a displacement of up to 16 liters. Built-in ConnectMax technology, numerous safety features, and a power bank function make it a versatile tool not only for emergency starting but also for everyday power support. The package is rounded out by a 400-lumen LED flashlight and a rugged IP65-rated design.Power and reliability in every situationWith a peak current of 4000A and a high-performance 207.2 Wh Li-Po battery, the device quickly starts even very large engines. The 24V system and ConnectMax technology guarantee high starting efficiency in trucks, agricultural machinery, and industrial equipment. Safety is ensured by numerous protections (against overcharging, overheating, and short circuits) as well as sturdy clamps for quick connection to the battery.Power bank function and broad compatibilityThe Lokithor J701HD offers extensive charging and power supply options for other devices. The USB-C port supports voltages of 5V/3A, 9V/3A, 12V/3A, 15V/3A, and 20V/5A, reaching a maximum power of 100W. Additionally, USB-A outputs (Quick Charge 18W) and a DC output with a range of 22.4V–29.4V/10A are available. The device can be charged via both USB-C and the DC input (5–30V, max. 100W), as well as by using both sources simultaneously at up to 100W.Built-in 400-lumen LED flashlightThe integrated 400-lumen LED flashlight provides good illumination in challenging conditions, such as nighttime breakdowns or work in dimly lit areas. This practical solution enhances the comfort and safety of using the device in any situation.Fast charging and long service lifeIt takes approximately 2–3 hours to fully charge the device, allowing you to quickly prepare it for reuse. The battery has a lifespan exceeding 1,000 cycles with proper use, ensuring long-lasting and reliable performance. The Lokithor J701HD is designed to operate in a wide temperature range—from -20°C to 60°C. Charging is possible at temperatures ranging from 0°C to 45°C, while safe storage is possible between -20°C and 50°C. The IP65-rated housing protects the device from dust and splashes, making it suitable for use in harsh field and workshop conditions.Included Jump starter Smart jumper cables USB-A to USB-C cable USB-C to USB-C cable Car cigarette lighter adapter (DC) Manufacturer LOKITHOR Model J701HD Voltage compatibility 24V Battery type Li-Po Capacity 207.2 Wh (56,000 mAh) Peak current 4000 A Supported engines Gasoline and diesel up to 16.0L Power up to 100 W LED flashlight 400 lumens Fast charging USB-C up to 100W Charging outputs USB-A up to 18W, USB-C up to 100W, DC 22.4–29.4V/10A Power bank function Yes Safety system Yes, multi-level protection Charging time Approximately 2–3 hours Operating temperature -20°C to 60°C Charging temperature 0°C to 45°C Storage temperature -20°C to 50°C Protection rating IP65

MINI PC GMKtec G3S Intel N95 16GB RAM + 512GB SSD WIN 11 PROGMKtec G3S is an energy-efficient computer with huge capabilities enclosed in a small form factor. It is powered by a quad-core Intel N95 processor (up to 3.4 GHz, 6 MB Cache) and integrated Intel UHD graphics (up to 1200 MHz), which together guarantee smooth and stable operation both in the office and at home. The device supports dual 4K monitors via HDMI 2.0, offers 16GB of DDR4 memory and a high-speed 512GB SSD, with M.2 slots to expand space up to 8TB. Built-in WiFi 5, Bluetooth 5.0, as well as Wake On LAN and Auto Power On functions ensure convenience of use and reliable connection in any situation. The device runs on Windows 11 Pro, while remaining compatible with Windows 10, Linux and Ubuntu. A cooling system with a quiet fan maintains optimal operating temperatures without annoying noise.Powerful Intel Alder Lake N95 processorThe GMKtec G3S Mini PC uses a quad-core Intel Alder Lake N95 processor, clocked at up to 3.4 GHz and equipped with 6 MB of cache. The unit, with a TDP of 15 watts, ensures high energy efficiency, and in the Geekbench 6 (Multi-Core) test it reaches 2902 points, clearly outperforming the N97, N200 or Celeron N5095 chips. With this power, the computer easily handles everyday tasks, office applications and high-quality multimedia, while maintaining smooth operation and system stability.Fast and stable connectivityDual-band Wi-Fi 5 (2×2 2400 Mbps) support ensures high data transfer speeds and stable wireless connection, while the built-in RJ45 Gigabit LAN 1000 Mbps port enables wired networking without lag. The device also supports Bluetooth 5.0, which offers three times the transmission speed, range and noise immunity of the 4.2 version, making the mini PC great for office work, peripheral use or transferring files between devices.High memory performance and great expandabilityThe computer offers 16GB of DDR4 SODIMM memory, guaranteeing fast system performance and smooth switching between applications. A 512GB M.2 2242 SSD is provided for user data, which can be easily replaced or expanded. The design of the device supports two independent storage media - M.2 2280 PCIe (up to 8 TB) and M.2 2242 SATA (up to 2 TB). Thanks to the well-thought-out design, installation of an additional drive is quick and requires no special tools.High availability of ports and wide compatibilityThe device provides full freedom of connections. There are two HDMI ports (4K@60 Hz) for simultaneous operation on two monitors, as well as two USB 3.2 and one USB 2.0 ports for accessories and storage media. A stable network connection is provided by an RJ45 2.5G LAN port, while a 3.5mm audio jack allows you to connect headphones or speakers. The whole is complemented by a DC 12V / 3A power port. This makes the computer compatible with monitors, TVs, projectors, printers, audio devices and NAS servers, creating a versatile work and entertainment station.4K image and dual-screen operationThe integrated Intel UHD graphics chip enables smooth multimedia playback and comfortable high-definition work. Thanks to two HDMI 2.0 ports, the computer simultaneously supports two monitors in 4K@60 Hz quality, which allows you to efficiently manage your workspace and conveniently use multiple applications at the same time. Such a solution works well for office work, as well as for photo editing, video editing or data analysis.Thoughtful design and effective coolingThe compact GMKtec G3S chassis was designed with performance and reliability in mind. Inside, it uses high-end components, including 16GB DDR4 memory, high-speed M.2 2280 PCIe (up to 8TB) and M.2 2242 SATA (up to 2TB) drives, as well as Wi-Fi 5 and Bluetooth 5.0 connectivity modules. A cooling system with a fan and numerous vents effectively dissipates heat, ensuring stable operation even under higher loads. The whole is enclosed in a solid, modern-finished case with a minimalist design. Thanks to its compact dimensions, the co

LaserPecker 2 Suit Version LaserPecker 2 is a laser that combines performance, versatility and mobility. With its advanced technology and intuitive operation, the device opens up new possibilities in the field of object personalization. It is ideal for professionals and amateurs wishing to explore the world of laser engraving. Engraving photos and a variety of materials The LaserPecker 2 stands out for its ability to engrave photos from an album or camera, allowing users to create unique, personalized works. The device has the ability to work on a variety of materials, such as wood, metal, leather and plastic, making it an extremely versatile tool, ideal for a variety of projects. Mobility and performance Despite its small size, the LaserPecker 2 is an extremely powerful device. Its compact design makes it easy to carry and allows engraving in places that are difficult to reach with other devices. This makes it ideal for those who change their workspace frequently or work with objects of unusual form. Electric stand with adjustable focal length The electric stand is another asset of this device. It allows you to precisely adjust the focal length using the side buttons, which increases the accuracy and quality of engraving. In addition, the ability to hold the laser at the desired angle allows for optimal adjustment to the engraved surface. Compatibility and supported formats The LaserPecker 2 also stands out for its excellent compatibility with various operating systems, such as iOS, Android, macOS and Windows. Support for a wide range of file formats, including jpg, svg, png, bmp and many others, makes this device extremely versatile. Advanced laser technology The LaserPecker 2 is a device equipped with a 5000mW NICHIA laser diode with a wavelength of 450nm, which provides outstanding precision and engraving performance. Its ability to work at 1K, 1.3K and 2K resolutions enables clear and detailed effects on a wide range of materials. The device has an impressive precision of up to 0.025mm, which guarantees exceptional quality of final products. This makes the LaserPecker 2 suitable for intricate and precise projects, both at home and in professional applications. Included Laser Power cable with power adapter Electric stand LaserPecker Versatile Electric Roller Laser cover USB cable x 2 Protective goggles Ruler Wrenches and screws Brand LaserPecker Model L2 Version number 2021-7A Laser type 450nm NICHIA Diode Laser Output power of the laser source 5000mW Data transmission Bluetooth 5.0 Supported formats jpg, svg, png, bmp, G code, CAD, AI, CDR, dwr and more Compatibility iOS 9.0 and above, Android 6.0 and above, macOS 10 and above, Windows 10 and above Power input DC (12V, 5A), AC (100-240V, 50-60Hz) Power 5W Operating temperature range 0°C-65°C Operating humidity range 5%~80% Safety certification EC 60825-1, CE, ROHS, FCC, FDA, CDRH registration IEC 60825-1, NCC, KC, UKCA, TECLEC Engraving speed 800mm/s Precision 0.025mm Engraving area 2000mm Resolution 1K/1.3K/2K Distance 110nm Viewing speed 3750mm/s Weight 2.2kg Dimensions Laser unit: 162.5 x 60 x 122mm, electric stand: 194 x 153.5 x 236mm Continuous operation time 168h Lifetime 10000h

FOSSiBOT F3600 Pro Portable Power StationThe FOSSiBOT F3600 Pro 3600W is a state-of-the-art power station with a capacity of 3840 Wh, designed for home use, RV travel, field work, and emergency power supply during power outages. The device offers 3600 W of pure sine wave output power and can power up to 13 devices simultaneously. Thanks to 2200 W AC fast charging and support for solar charging up to 2000 W, the station can be ready for use in no time. The built-in LiFePO4 battery ensures high durability, and the ability to expand capacity up to 11,520 Wh allows the device to be adapted to higher energy demands. An additional convenience is mobile app support via Bluetooth and Wi-Fi, enabling convenient monitoring of operating parameters and remote control of the device.High capacity for home, travel, and off-grid workWith a capacity of 3,840 Wh, the F3600 Pro works well both as a backup power source at home and during camping trips or when working in locations without access to the electrical grid. The station can power refrigerators, TVs, coffee makers, electronic devices, workshop equipment, and RV appliances, among other things. With the ability to connect two additional batteries, the capacity can be increased to a maximum of 11,520 Wh, extending device runtime by several days. The design features transport wheels and a handle, so despite its large capacity, the unit remains easy to move.Fast charging and solar power supportThe F3600 Pro model supports several charging methods, allowing you to easily adapt the charging method to current conditions. Charging from an AC outlet with up to 2200 W of power significantly reduces the time needed to get the device ready for use. The station also supports solar charging up to 2000 W via photovoltaic panels, as well as simultaneous AC and solar charging with a total input power of up to 4200 W. The built-in MPPT controller helps efficiently utilize solar energy, which is particularly useful during longer trips or when using the device in off-grid systems.Multiple ports and convenient useThe device is equipped with a wide range of connectors, allowing for the simultaneous connection of various devices. Users have access to three 230 V AC outlets, a USB-C PD 100W port, three USB-C PD 20W ports, two USB-A QC 3.0 18W ports, a 12V car cigarette lighter socket, and DC and high-current outputs for camping equipment and RVs. A pure sine wave ensures stable operation even for more demanding electronics. Additionally, the mobile app allows you to check the battery level, manage ports, and monitor the device’s operating parameters without having to approach the station.Durable LiFePO4 battery and robust constructionThe FOSSiBOT F3600 Pro uses a LiFePO4 battery, which, according to the manufacturer, offers over 6,500 charge cycles down to 50% of its original capacity. These types of cells are distinguished by high operational stability and greater resistance to intensive use compared to traditional lithium-ion batteries. The housing is designed for use in various conditions, making it ideal for both home use and travel. Its compact design for its class makes it easy to transport in a car or RV, or to store in a garage or workshop.Included FOSSiBOT F3600 Pro Power Station AC charging cable Car charging cable XT90 solar charging cable Portable flashlight USB cable for flashlight Cable storage bag Handle covers User manual Manufacturer FOSSiBOT Model F3600 Pro Battery capacity 3840 Wh Expandable up to 11,520 Wh Battery type LiFePO4 Battery lifespan 6,500+ cycles to 50% capacity AC output power 3,600 W Peak power 7,200 W Inverter type pure sine wave USB-C ports 1 × PD100W, 3 × PD20W USB-A ports 2 × QC3.0 18W Car cigarette lighter socket 1 × 12V/10A DC5521 sockets 2 × 12V/3A High-current socket for RVs 1 × XT60 12V/25A Maximum AC charging power 2200 W Connectivity Bluetooth, Wi-Fi App control Yes Simultaneous charging and discharging Yes Dimensions 60.9 × 32.1 × 47.5 cm Weight 42 kg Operating temper