3000 MHz

EcoFlow 120A WiFi Smart MeterThe EcoFlow Smart Meter is a smart energy meter that allows you to accurately measure your power consumption in real time - whether you're consuming power or feeding it back into the grid. Compact and easy to install on a DIN rail, it offers Wi-Fi connectivity for remote monitoring and Bluetooth for intuitive configuration. Records data to the nearest minute and stores it for at least 60 days for accurate consumption analysis. It allows you to detect energy-intensive appliances, shift loads to cheaper tariff hours and optimize the operation of your EcoFlow STREAM home energy storage. Whether you use a photovoltaic system or simply want to reduce your electricity bill, this meter is the foundation of a smart, energy-efficient home.Accurate measurement and full transparency of consumptionWith precise measurement of consumption and electricity return, the EcoFlow Smart Meter allows you to track your consumption in real time via the EcoFlow app. The device supports both 1-phase and 3-phase installations, and three current transformers are included to ensure high measurement accuracy. Regardless of how your switchgear is built, the Smart Meter will provide a complete view of your home's energy flow.Convenient installation and easy setupThe device mounts directly on a DIN rail, saving space and maintaining the aesthetics of the installation. Once installed by an electrician, all you need to do is connect the meter to the EcoFlow app via Bluetooth, and then configure it using the clear steps in the manual. Further monitoring is done remotely via Wi-Fi, without the need for physical access to the device.Consumption analysis with up to the minute accuracyThe Smart Meter records measurement data with an interval of one minute and stores it for a minimum of 60 days. This gives the user the ability to accurately analyze consumption and better adjust home energy habits. This function is also useful in the context of detecting energy-intensive appliances and scheduling consumption based on hourly tariffs.Savings and sustainabilityThe EcoFlow meter helps reduce electricity costs in real terms through smart consumption management. Combined with home energy storage, EcoFlow STREAM makes it possible to maximize the use of stored energy from photovoltaic panels - excess production is stored during the day to be used in the evening. This not only saves money, but is also a step towards a more sustainable, eco-friendly lifestyle.Included EcoFlow 120A smart meter current clamps x3 user manual Manufacturer EcoFlow Model EF-EM-P3-120 Maximum current 120 A per phase Compatibility with phases 1 and 3 phase Connectivity Bluetooth Communication Wi-Fi (remote monitoring and consumption control) Dimensions 90 × 66 × 36 mm (including antenna) Operating temperature -25°C to 70°C Storage temperature -40°C to 85°C Operating altitude ≤ 3000 m Relative humidity 5%-95% Input voltage 400V/230V 3N, CAT III 300V Power input 100-276 V, 50/60 Hz, < 3 W Input current 48 mA Cable cross section 0.5-2.5 mm2 / 20-14AWG (solid wire, stranded wire and sleeve) Wire stripping length 6-7 mm Degree of contamination PD2 Protection degree IP30 Compatible current transformer 48mA, 0.1%In~In, 0.1%In Wi-Fi Frequency: 2400-2495 MHz (for EU); Maximum output power:

FNIRSI DPOX180H 2-in-1 Handheld Digital Phosphor OscilloscopeThe FNIRSI DPOX180H is a handheld Digital Phosphor Oscilloscope (DPO) that combines a 180 MHz dual-channel oscilloscope, a 20 MHz DDS function generator, and advanced signal analysis functions. It is designed as a compact, mobile tool for service, workshop, and laboratory work, offering high functionality in a single device.180 MHz bandwidth and 500 MSPS – measurement precisionThe oscilloscope offers 180 MHz (-3 dB) analog bandwidth and real-time sampling up to 500 MSPS (250 MSPS in dual-channel operation). This allows for accurate reproduction of fast edges, pulses, and high-frequency signals, which is crucial in the diagnosis of modern electronic systems.Digital Phosphor technology – more information in the waveformThe Digital Phosphor technology uses brightness scale and color temperature to visualize signal frequency. This makes it easy to spot jitter, noise, instabilities, and rare events that may remain invisible in classic oscilloscopes.50,000 wfms/s – no dead timeThe high refresh rate of 50,000 waveforms per second significantly reduces acquisition dead time. This allows you to effectively capture short-term disturbances and signal anomalies, which is particularly important when analyzing switching power supplies and digital buses.Hardware bandwidth limit of 20 MHz and stable triggerThe built-in switchable 20 MHz hardware bandpass filter effectively reduces noise and high-order harmonics. Combined with an extensive triggering system (Auto/Normal/Single, rising and falling edge) and adaptive trigger stabilization, it ensures a clear and stable signal image.FFT and X-Y mode – frequency and relationship analysisThe FFT function provides a quick, qualitative preview of the frequency spectrum of the signal under test. In addition, the X-Y mode with digital phosphor allows you to analyze the amplitude and phase relationships between two channels, e.g., in the form of Lissajous figures.Time zoom and scroll modeThe oscilloscope offers a ZOOM time base in the range of 2×–1000×, allowing for accurate analysis of selected waveform segments. The scroll mode allows for continuous observation of slow-changing signals in real time.20 MHz DDS generator and chopping functionThe built-in 20 MHz DDS function generator supports 14 waveform types, with frequency adjustment in 1 Hz steps. The unique chopping output function allows you to cut out a fragment of the measured waveform and use it as the generator output signal, with the ability to save up to 500 custom signals.Data storage, viewing, and exportThe internal 120 Mbit memory can store up to 250 waveforms and 90 screenshots (BMP). Data can be viewed directly on the device or exported to a computer via USB, and the firmware can be easily updated.Mobility, safety, and ease of useThe 2.8" (320×240) color IPS screen ensures good readability in all conditions. The device is equipped with one-button automatic configuration, cursor measurements, input protection up to 400 V, a 3000 mAh Li-ion battery (up to approx. 4 hours of operation), and fast 5 V / 2 A charging. The FNIRSI DPOX180H is a versatile and safe tool for electronics engineers, service technicians, students, and demanding hobbyists. Manufacturer FNIRSI Model DPOX180H Device type Handheld digital phosphor oscilloscope (DPO) Number of channels 2 Analog bandwidth 180 MHz (-3 dB) Sampling frequency 500 MSPS (1 channel) / 250 MSPS (2 channels) Refresh rate 50,000 waveforms/s Display technology Digital Phosphor Oscilloscope (DPO) Spectrum analysis FFT (Fast Fourier Transform) Operating modes Auto / Normal / Single Triggering Rising edge / falling edge Hardware bandwidth limit 20 MHz (switchable) X-Y mode Yes (with digital phosphor) Time base zoom 2× – 1000× Scroll mode Yes (roll/scroll) Signal generator DDS (Direct Digital Synthesis) Maximum generator frequency 20 MHz Generator waveform types 14 (sine, square, triangle, saw, pulse, multi-tone, and others) Generator frequenc