390 Hz

The RøDE AI-1 is a USB-C audio interface with one combined XLR/jack input and stereo output using cutting-edge technology to ensure ease of use, versatility and, most importantly, superior sound. Interface: USB, connector C Resolution: 24-bit, 44.1/48/88.2/96 kHz Neutrik Combo XLR/jack input TRS stereo output Headphone output with separate volume control Phantom power supply Direct monitoring Compatibility Mac OS 10.10 and later / Windows 7 and later The AI-1 has a single Neutrik Combo XLR/jack input to which you can directly connect a microphone or perhaps a guitar or bass, adjust the gain level and start recording. Of course there is +48V phantom power for condenser microphones. For listening, there are analogue balanced TRS outputs (6.3mm jack) on the rear panel and a headphone output with separate volume control on the front panel. Connection to a computer is handled by a new USB Type-C connector, through which the AI-1 is also powered. The AD/DA converters operate in 24-bit quality with a sample rate of up to 96 kHz, giving the AI-1 clear, accurate sound with a large dynamic range. Specifications: Interface Resolution: 24-bit, 44.1/48/88.2/96 kHz Frequency range: 20 Hz - 20 kHz XLR input Dynamic Range: 104 dBA Input impedance: 1.3 kohm Instrument input Dynamic Range: 99 dBA Input impedance: 900 kohm Headphone Output Max Output Power 32 ohm ->210 mW 300 ohm ->390 mW

1800R Curved Screen A curved monitor better matches the natural field of view. By creating a wider perspective, it enhances depth perception and minimizes peripheral distractions, helping you focus on whats on the screen. 100 Hz Refresh Rate Stay at the center of the action while gaming, watching movies, or working on creative projects. The 100 Hz refresh rate reduces input lag and motion blur, ensuring you dont miss a thing, even during fast-paced scenes. Game Mode Gain an advantage over the competition with optimized Game Mode settings. Colors and contrast can be instantly adjusted to see scenes more clearly and spot enemies hiding in the dark. Eye Saver Mode & Reduced Screen Flicker Take care of your eyes and stay comfortable during long sessions. Advanced TÜV-certified Eye Saver Mode technology reduces eye strain by minimizing blue light and cutting annoying screen flicker. Multiple Connectivity Options Connect devices directly to the monitor for enhanced convenience and workflow efficiency.

Sunlu Filament Dryer for the Bambu Lab AMSThe SUNLU AMS Heater is a smart filament dryer designed specifically as an upgrade for the top cover of the Bambu Lab AMS system (Generation 1). It allows you to dry filament and print simultaneously, eliminating the need for pre-processing the material. Thanks to rapid heating to 70°C in just 20 minutes, an advanced air circulation system, and intelligent humidity monitoring, the device significantly improves print quality. Its compact design, full compatibility with AMS, and support for up to 16 colors make this solution ideal for demanding 3D printing users.Print and dry simultaneously—save time and achieve better resultsForget about drying filament separately before printing. Thanks to integration with AMS, you can dry the material exactly when you use it. This means stable operating conditions throughout the entire printing process, fewer errors, and higher-quality models without additional steps.Precise air circulation – even drying without the risk of overheatingA unique air channel system directs heat exactly where it’s needed—around the filament. This ensures effective and even drying while keeping AMS components, such as the feed motor, safe. You minimize the risk of material deformation and component overheating.Fast heating up to 70°C – ready in minutesAn efficient heating system with PTC technology allows you to reach a temperature of 70°C in about 20 minutes. This is faster than traditional solutions, which translates to greater operational efficiency and shorter wait times before starting a print.Smart humidity control – filament always in perfect conditionThe rH mode automatically monitors humidity levels and reacts in real time. When humidity exceeds the set threshold (50% by default), the device begins drying, and when it drops to around 20%, it switches to standby mode. You can also adjust the range (25–50%) to suit your needs, ensuring optimal conditions for every material.Easy installation – quick upgrade in 2 minutesInstalling the device is extremely simple and requires no specialized tools or expertise. Just unscrew, mount, and tighten—the entire process takes about 2 minutes. It’s a quick way to improve the performance of your AMS.More possibilities, less space – ideal for multicolor printingAfter installing the AMS Heater, you can use configurations of up to 16 colors without increasing the space required. This is a huge advantage for those working on complex projects and multi-material printing.Included in the set: SUNLU AMS Heater module Mounting hinges Mounting screws Allen wrench Power cord User manual Manufacturer Sunlu Model Heater for AMS Bambu Lab Product dimensions 363 × 278 × 131 mm Package dimensions 415 × 316 × 190 mm Net weight 1.7 kg Temperature range 35–70°C Heating time to 70°C approx. 20 minutes Time setting range 0–99 h Humidity display range 10–90% RH Maximum power 390 W Rated power 220 W Standby power consumption 0.6 W Power supply AC 110 V / 60 Hz or AC 220 V / 50 Hz Maximum current 2.2 A (230 V) / 4.15 A (120 V) Heating system PTC + dual air circulation Humidity control Automatic (starts above 50%, stops below 20%, adjustable between 25–50%) Compatibility Bambu Lab AMS Generation 1 Function Drying during printing