3D monitors

Anycubic ACE 2 Pro Multi-Filament System for the Kobra S1The Anycubic ACE 2 Pro is an advanced multi-filament system that opens up new possibilities in 3D printing, allowing you to create models in up to 16 colors. It supports 4 colors as standard, but connecting four units allows you to significantly expand the color palette and tackle more complex projects. The system is compatible with Anycubic printers such as the Kobra 3, Kobra 3 V2, Kobra 3 Max, Kobra S1, Kobra S1 Max, and Kobra X, offering great flexibility in adapting to your existing equipment.Smooth and fast filament feedingThe device uses 4 independent brushless motors that ensure stable, quiet, and precise operation. A new-generation buffering mechanism ensures smooth filament feeding and retraction, eliminating the risk of jams in each channel. Loading speed has been increased to 50 mm/s, a 100% improvement over the previous version, and filament change time has been reduced to approximately 56 seconds, saving up to 47 minutes over 100 changes.Optimal conditions thanks to drying and humidity controlThe ACE 2 Pro system allows for simultaneous filament drying and printing, keeping the material in optimal condition throughout the entire operation. Built-in temperature and humidity sensors monitor conditions in real time, and a solenoid valve actively removes excess moisture. An additional silicone ring seal protects the filament from external factors, resulting in better print quality and a lower risk of errors.Durable construction and quiet operationThe input ports, made of alumina ceramic, are highly wear-resistant, which extends the device’s lifespan and reduces the need for maintenance. Brushless motors offer a lifespan of at least 5,000 operating hours. At the same time, the device operates very quietly—below 48 dB with the door closed, and around 55 dB during active drying—allowing for comfortable use even in enclosed spaces.Easy maintenance and quick jam removalThe use of external feed channels and a quick-release mechanism allows for instant disassembly and removal of any jams. As a result, servicing takes only a few seconds and requires no complicated tools, significantly enhancing user convenience.Smart printing assistanceThe built-in smart assistant system offers features that genuinely simplify daily work. The device estimates the amount of filament remaining on the spool, automatically switches to a new spool when it runs out, and recognizes Anycubic filaments and their parameters (when connected to the internet). This makes the printing process more predictable and maintenance-free. Manufacturer Anycubic Model Ace 2 Pro Product code DS20-IP-O Dimensions 368 × 291.5 × 236.5 mm Weight 3.7 kg Enclosure material ABS/PC Motors 4 × brushless motors Filament compatibility PLA, PETG, ABS, ASA, PET, PA, PC, PVA (dry), BVOH (dry), PP, POM, HIPS, PLA-CF, PETG-CF, PAHT-CF, TPU (for ACE), PVB Filament diameter 1.75 mm Spool compatibility Spool outer diameter: 195–200 mmSpool width: 60–68 mmSpool thickness: 3–6 mm Smart filament identification Supported Filament end detection Supported Automatic print resume Supported Maximum drying temperature 65°C Drying efficiency Suitable for: PLA, PETG, PVB, TPUCompatible but not optimized: ASA, ABS, PET, PA, PC, PP, BVOH, POM, HIPS, fiber-reinforced materials Active humidity control Supported Sealed chamber Supported External PTFE tube Supported Temperature and humidity monitoring Temperature and humidity levels (visible in the app, slicer, and on the printer screen) Rated power 220 V: 330 W (max.)110 V: 235 W (max.) Printer compatibility Kobra 3 / Kobra 3 V2 / Kobra 3 Max / Kobra S1 / Kobra S1 Max / Kobra X

Sony F970 ārējās instalēšanas un barošanas komplekta konstrukciju var izmantot, lai instalētu un barotu ārējo aprīkojumu, to ir viegli uzstādīt un izjaukt, vienkāršojot fotografēšanas aprīkojuma lietošanu.Atbalsta 3D LUT Log to Rec.709, lietotāja 3D LUT augšupielādiAtbalsta skārienjūtīgo izvēlniAugsta izšķirtspēja: Full HD 1920x1200, augsts kontrasts: 1200:12200nit dienas gaismas redzamība, gaismas sensors automātiskai aptumšošanai160° plati skata leņķi IPS panelisNodrošina papildu barošanas izeju; ļauj filmētājiem darbināt savas kamerasAtbalsta HDR uzraudzībuAr viļņu formas, vektorskopa, histogrammas, fokusa palīgsistēmas, monohroma, iebūvēta audio u. c. funkcijām var palīdzēt jums precīzi noteikt ekspozīciju un fokusēt katru kadru.Stereo austiņu izejaLīdzstrāvas 8 V strāvas izeja DSLR kameras vai bezspoguļa kameras darbināšanai

1920 x 1080 skārienjūtīgais ekrāns Līdz DCI 4K25 HDMI video ievade 1080p60 Ierakstīšana SD kartē 2000 cd/m² spilgtums HDR uzraudzība, 3D LUT atbalsts Viļņu forma, vektorskops, fokusa pastiprināšana Marķieri, viltus krāsas, krāsu temperatūra Iebūvēts audio, 3,5 mm austiņu ports Barošana, izmantojot L sērijas/F970 vai līdzstrāvas ievadi Iekļauts 1/4"-20 vītne & apavu stiprinājums

Creality HiCreality Hi is an innovative 3D printer that comes with advanced features such as automatic leveling, fast table heating and active vibration dampening. It provides exceptional precision and smooth operation even at extreme speeds. Its metal construction, quiet operation (

7" 1920 x 1200 IPS LCD monitorsHDMI un SDI ieeja/izeja2200 cd/m² spilgtums, skārienjūtīgais ekrānsSD, HD un DCI 4K video ievadiDivu L sērijas/NP-F akumulatoru plate1200:1 kontrasta attiecība, 3D LUT atbalsts160° skata leņķis

Deer Run RW600 Magnetic Rowing Machine (White)The DeerRun RW600 is a modern magnetic rowing machine that provides quiet and smooth movement with minimal impact on your joints. With 32 resistance levels, a sturdy construction, and PitPat app support, this machine offers a full-body workout without leaving home. Its compact size, comfortable handles, and built-in phone or tablet holder make this model a great choice for both beginners and regular exercisers.Full-body workout without strainThe RW600 is ideal for those looking for a workout that engages almost all muscle groups without straining the knees or spine. The rowing motion strengthens the back, legs, arms, and abdominal muscles, while improving circulation and endurance. It is a great choice not only for burning calories, but also as part of rehabilitation or daily activity.32 resistance levels – adjust the intensityThe device offers up to 32 levels of adjustable magnetic resistance, allowing you to precisely tailor your workout to your abilities and goals. From a light warm-up to an intense cardio workout, everything runs smoothly. The quiet operation of the mechanism means you can train at any time of the day without disturbing other members of your household.PitPat app – more than just rowingThe RW600 connects via Bluetooth to the PitPat app, which offers interactive workouts with coaches, online competitions, races in virtual environments, and 3D games. You can track your progress, join challenges, and earn rewards. The app also syncs with Apple Health, Google Health, and Strava, allowing you to fully monitor your activity.Comfort of use – well-thought-out detailsThe long slide rail (over 95 cm) allows for a full range of motion, even for taller users. Non-slip handles provide a secure grip, and a bright LED display keeps you informed about time, distance, number of repetitions, and calories burned. The built-in smartphone or tablet holder allows you to conveniently track apps, watch videos, or listen to music while you train.Included Magnetic rowing machine Phone/tablet holder Power cord (1.8 m) Hex screws ×2 Allen key Assembly accessories User manual Quick start guide Manufacturer DeerRun Model RW600 Color White Resistance type Magnetic Resistance range 1–32 levels Weight 18.8 kg Maximum load 136 kg Dimensions 162 x 46.7 x 68.5 cm Sliding rail length 95 cm Synchronization with apps Apple Health, Google Fit, Strava

RayNeo Air 4 Pro AR glassesRayNeo Air 4 Pro AR glasses transform everyday content into an immersive visual experience—wherever you are. With SeeYA 0.6″ Micro-OLED displays, HDR10 support, brightness up to 1200 nits, and a standard virtual screen size of 135 inches, the glasses create a private entertainment space visible only to you. Depending on the viewing distance, they can simulate a screen size of up to 201 inches (at 6 meters), offering a cinematic effect. The lightweight, 76-gram design hides advanced image and sound technology that makes RayNeo Air 4 Pro an alternative to a TV, monitor, and headphones.An image that really draws you inImage processing is handled by the Vision 4000 chip, supported by Pixelworks technology, which enables dynamic real-time display optimization. Full HD resolution for each eye (1920 × 1080) in 2D mode and 3840 × 1080 in 3D, 200,000:1 contrast ratio, wide color gamut (145% sRGB, 98% DCI-P3, ΔE 85% at 18 lp/mm) guarantee clarity of displayed content regardless of conditions. AR RayNeo Air 4 Pro is a solution designed for both home and travel use.No compromises for people with vision impairmentsRayNeo Air 4 Pro supports a snap-on frame for prescription lenses, allowing people with vision impairments to enjoy the full capabilities of the glasses without compromise. Built-in sensors – accelerometer, gyroscope, proximity sensor, and magnetometer – support stable operation and comfort in a variety of scenarios. The set also includes a case, replaceable nose pads, a data cable, and a manual, making RayNeo Air 4 Pro ready to use almost immediately after unboxing.Included: RayNeo Air 4 Pro AR glasses Frame for corrective lenses (sample) Lens cover Data cable Replaceable nose pads x2 Carrying case Glasses cleaning cloth Quick start guide User manual General Manufacturer RayNeo Model Air 4 Pro Dimensions and weight Dimensions when folded 176.5 × 154.3 × 47.4 mm Dimensions when unfolded 57.8 × 154.3 × 47.4 mm Weight 76 g (not including nose pad) Display Display type SeeYa 0.6″ Micro-OLED Image size (equivalent) 135 inches To-Eye Brightness Up to 1200 nits (adjustable) Eye field of view 14 mm × 7 mm Eye protection Mixed 3840 Hz PWM dimming and low flicker dimming Resolution 2D mode: 1920 × 10803D mode: 3840 × 1080 Refresh rate 60 Hz / 120 Hz Color reproduction ΔE < 2145% sRGB98% DCI-P3 Contrast 200,000:1

Ikan Delta 7inch Monitor with 3D-LUTs

Anycubic Wash & Cure 3 Max: A Device for Washing and Curing 3D PrintsThe Anycubic Wash & Cure 3 Max is an advanced device that combines washing and curing functions into a single process. It offers a large working capacity of up to 14.9 liters and a maximum cleaning area of 300 × 165 × 300 mm, allowing it to easily handle large models and most resin printers with a diagonal of up to 13.6 inches. With alcohol consumption of less than 50 ml per cycle and the ability to clean up to 20 models using a single 5-liter container, the device significantly reduces operating costs and streamlines the entire process.Effective cleaning thanks to a dual-wash systemThe use of two modes—spray and immersion—allows for the thorough removal of resin residue from both the model’s surface and hard-to-reach details. Mechanical liquid jets effectively reach every part of the print, while additional immersion rinsing removes residues trapped in recesses. This combination of methods results in more thorough cleaning while reducing alcohol consumption by over 50% compared to traditional solutions.High compatibility and workspaceThe device features a large 14.9-liter working chamber. It supports models up to 300 × 165 × 300 mm and build platforms up to 12 inches in size and weighing up to 2.2 kg. This makes it suitable for both large projects and batch processing of prints.360° CuringThe automatically rotating curing platform ensures uniform exposure of models from all sides. A high curing energy of 25,000 µW/cm² and a wider exposure range allow for the effective and precise curing of even the most complex structures.Process AutomationDevice operation has been simplified to the maximum thanks to the One-click Washing and Curing feature. A single button press initiates the entire process, eliminating the need for manual handling of multiple steps. This solution significantly reduces processing time and minimizes user involvement, especially when printing large volumes.Alcohol savings and lower operating costsThe device is designed for efficient use of isopropyl alcohol. Cleaning large models requires only about 4 liters of liquid, whereas traditional devices require up to 8.5 liters. Additionally, a single cycle consumes less than 50 ml of alcohol, significantly reducing costs and the frequency of cleaning solution replacement.Convenient operation and error detectionThe integrated flip-top lid allows for quick opening and closing, and the intuitive control panel ensures convenient operation at every stage of the process. The smart diagnostics system continuously monitors the device’s operation and alerts you to potential issues. The device signals, among other things, an open lid, low liquid levels, or a blocked drain.Included Device for washing and curing prints Tray Detergent container x1 Tank x1 Water container x1 Hoses x4 Set of Allen wrenches Plastic scraper Replacement filter for the container User manual x1 Power supply with power cord Manufacturer Anycubic Product name Anycubic Wash & Cure 3 Max Product code WC3M-IP-O Capacity 14.9 L Maximum model size 300 × 165 × 300 mm Alcohol consumption per cycle

7" 1920 x 1200 Full HD IPS ekrāns Skārienjūtīgā ekrāna izvēlnes darbība 2200 cd/m spilgtums, redzams dienas gaismā SDI & HDMI krusteniskā konvertēšana HDR uzraudzība & 3D LUT papildināšanaport Viļņu formas & vektorskopa funkcijas Audio mērītāju uzraudzība Horizontālā & vertikālā attēla apvēršana Centra & drošības marķieri Komplektā iekļauta noliektā roka

atbalsta 4K 30P HDMI signāla ievadi Attēla apgriešana Pievienots pasīvais radiatora ventilācijas caurlaides mehānisms, siltuma izkliedēšanas veiktspēja ir labāka Pašbloķējošs 4 kontaktiņu aviācijas strāvas savienotājs Pielāgots maksimuma diapazons Attēla apgriešana Peaking vairs neaizņem Guides、Grids Viļņu forma pēc izvēles nosaka datus pirms vai pēc 3D LUT ielādēšanas.

Creality SparkX i7 Combo 3D PrinterThe Creality SparkX i7 Combo 3D Printer is a state-of-the-art device designed for users who want to print quickly, accurately, and without unnecessary setup. The model uses Fused Filament Fabrication (FFF) technology and combines high print speeds with automation systems that simplify daily operations. The kit also includes the CFS Lite module, which enables multicolor printing and convenient filament management.High print speedThe Creality SparkX i7 was designed with rapid model creation in mind. A maximum print speed of up to 500 mm/s and acceleration of up to 10,000 mm/s² significantly reduce project completion time. In practice, this means faster prototyping and the ability to print more parts in less time. The use of Input Shaping and Pressure Advance stabilizes the print head’s movement during operation, ensuring that even at high speeds, the model’s surface quality remains high.Automatic setup and user-friendly operationThe printer features fully automatic bed leveling, eliminating the need for manual calibration. This makes getting started easier and faster, especially for those just beginning their journey with 3D printing. Control is handled via a 2.85-inch color touchscreen, which provides quick access to the printer’s most important functions. The device also supports file transfer via Wi-Fi or USB drive, allowing you to conveniently prepare prints from your computer.AI camera and print monitoring systemThe SparkX i7 features a 720p AI camera with lighting that allows you to monitor the printer’s operation. The camera analyzes the printing process and detects common errors, such as “spaghetti”—the uncontrolled formation of filament strands. The system also monitors for filament shortages, tangled material, or printing in mid-air. This allows the device to stop printing and prevent waste of material and time.Interchangeable hotend and wide filament compatibilityThe printer is equipped with a quick-change hotend that can be swapped without tools. This solution simplifies maintenance and allows for faster configuration adjustments for different projects. The standard 0.4 mm nozzle can be replaced with 0.2 / 0.6 / 0.8 mm nozzles, allowing the user to adapt the printer for precise or large models. The SparkX i7 supports PLA, PETG, PLA-CF, and TPU filaments, enabling the printing of both decorative elements and more functional parts.CFS Lite Module – Multicolor PrintingThe Combo kit includes the CFS Lite module, which allows for the use of four filaments simultaneously. This makes it possible to print models in multiple colors without manually changing the material. The system supports automatic recognition of Creality filaments with RFID and an automatic filament refilling function, allowing for a seamless transition to the next spool when printing large models. The module also features its own filament feed motors and a tangling detection system. Manufacturer Creality Model SparkX i7 Combo Creality SparkX i7 Printing technology Fused Filament Fabrication (FFF) Build volume 260 × 260 × 255 mm Print speed up to 500 mm/s Acceleration up to 10,000 mm/s² Print accuracy 100 ± 0.1 mm Layer height 0.05 – 0.3 mm Filament diameter 1.75 mm Supported materials PLA, PETG, PLA-CF, TPU (64D or harder) Nozzle diameter 0.4 mm (compatible with 0.2 / 0.6 / 0.8 mm) Nozzle temperature up to 300°C Bed temperature up to 100°C Extruder Direct Drive Hotend quick tool-free replacement Build plate double-sided PEI sheet (gold texture) Leveling Fully automatic Camera AI 720p with lighting Error detection Spaghetti detection, air printing detection, filament run-out, filament tangle detection Resume printing after power loss Yes Connectivity USB Drive / Wi-Fi 2.4 GHz Communication port RS-485 (6-pin) Internal memory 8 GB EMMC File formats G-code / 3MF Software Creality Print 6.3 or newer System Creality OS Display 2.85" color touchscreen Status backlight RGB Interface Languages including English, German, Spanish,

Creality Halot-Mage S 3D PrinterThe Creality Halot-Mage S 3D printer is an advanced device that stands out for its incredible precision and printing speed, ideal for the most demanding users. With a 10.1-inch LCD screen with 14K resolution and an advanced lighting system, the Halot-Mage S provides incredible print accuracy, perfectly reproducing even the smallest details of jewelry and miniatures. Combined with the intuitive HALOT OS operating system, the printer offers full control and flexibility over your projects, making 3D printing simpler and more efficient than ever.LCD screenThe Creality Halot-Mage S features a large 10.1-inch LCD screen with an impressive 14K resolution (13320x5120 pixels). Such a screen allows for larger and more detailed models to be printed, which is crucial when creating precision pieces such as jewelry or miniatures. The high resolution guarantees the sharpness and accuracy of each print, minimizing the need for additional processing.Unified lighting systemThe Halot-Mage S printer uses the state-of-the-art Integral Light Source 3.0 lighting system, which provides uniform illumination with over 90% uniformity. Such a system results in better print quality and model consistency, eliminating imperfections due to uneven lighting. As a result, each print is accurate and faithfully reflects the design."Dynax" mode for greater speedThe closed-loop motor and dual linear guides allow printing in "Dynax" mode at speeds of up to 150 mm/h. This means that the printer is able to create models up to 3-4 times faster than traditional 3D printers, while maintaining high print quality. This is ideal for those who need to complete their projects quickly without compromising on quality.Effortless model removalThe three-layer "Pictor" film is durable and capable of reducing peel force by 35%, making it easy to remove finished prints. This makes the printing process more efficient, and the risk of damaging models during removal is greatly reduced.Intelligent operating systemThe HALOT OS operating system allows you to remotely control the printer using a smartphone or computer. You can easily monitor the printing process and download files directly from the Creality Cloud model library. This not only adds convenience, but also allows you to manage your projects more efficiently.Air purifier for your comfortThe Halot-Mage S printer is equipped with an automatic air purifier that effectively removes resin odors. The built-in activated carbon filter makes the working environment more friendly, and users can enjoy printing without unpleasant odors.IncludedPrinting platform ×1Resin tankx13D printer x1U disk x1Power cable x1Paper funnelRemovable film x1Plastic blade ×1Screwdriver set x1Metal blade ×1Calibration card ×1Ventilation tube ×1Lubricant ×1 Manufacturer Creality Model Halot-Mage S Printing technology LCD MSLA Working volume 223x126x230 mm (6462 cm³) Product dimensions 333x270x608 mm Package dimensions 421x356x672 mm Net weight 13.13 kg Gross weight 16.35 kg Printing speed ≤150 mm/h Layer thickness 0.05-0.2 mm Ekran LCD 10.1" Mono LCD LCD resolution 14K (13320x5120 px) XY resolution 16.8x24.8 µm Light source Integral Light Source 3.0 Light uniformity >90% Light intensity 3500±10% µW/cm² File Transfer USB Drive, RJ45 Ethernet Cable, WiFi Film High-speed "Pictor"/Standard FEP film Resin pump Optional Air purifier Yes Noise level 49 dB (1 m) Rated power 100 W Resins 405 nm resins Cutting software HALOT BOX/CHITUBOX/Tango Compatible OS Windows/Mac File formats STL, OBJ Display 4.3" Cloud printing application Creality Cloud User interface languages Chinese, English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Dutch, Polish, Japanese, Korean

ELEGOO Centauri Carbon 3D PrinterELEGOO Centauri Carbon is an advanced 3D printer designed for 3D printing professionals, engineers and enthusiasts. Featuring state-of-the-art CoreXY heated chamber kinematics and rugged construction, the device provides unparalleled accuracy, stability and the ability to work with a wide range of materials. With a maximum nozzle temperature of 320°C and a built-in automatic leveling system, each print is precise and perfectly reproduced, regardless of the complexity of the model.Stability at any speedThe Centauri Carbon is distinguished by a sturdy frame made of cast aluminum and additional reinforcements in the form of four aluminum alloy pillars and stainless steel side panels. This design provides excellent stability even at high printing speeds. Thus, the machine can reach speeds of up to 500 mm/s, which significantly reduces production time without sacrificing quality.Printing from demanding materialsThe use of an enclosed chamber with an active heating system allows working with demanding filaments that require stable temperature conditions. The Centauri Carbon supports a wide range of materials, including PLA, PETG, TPU, ABS, ASA and carbon fiber reinforced filaments such as PETG-CF and PA-CF. This allows users to create both flexible and extremely durable models that can withstand high temperatures and mechanical stress.Cooling system - precision in every detailCentauri Carbon is equipped with an advanced cooling system that includes a high-speed model fan, an auxiliary fan for parts and an external housing fan. This solution guarantees an optimal temperature in the chamber, which effectively prevents layer deformation and allows for extremely precise details in prints.Stable filament feeding and automatic cuttingA dual extruder made of hardened steel ensures smooth and precise material feeding, even when printing at high speeds. The built-in automatic filament cutter allows for fast and precise cutting and material reversal, eliminating the problem of clogged nozzles and improving the overall reliability of the device.CoreXY kinematics - speed and accuracyThe use of CoreXY kinematics makes the printer achieve high precision and printing speed, while reducing the weight of moving parts. As a result, Centauri Carbon not only runs faster than standard 3D printers, but also provides better detail reproduction and higher print repeatability.Automatic leveling and Z-axis compensationThe printer is equipped with an automatic calibration system, which uses four precision pressure sensors and an intelligent Z-axis compensation algorithm. As a result, the user can fully focus on designing, and the table alignment itself is done with a single click, eliminating the need for manual adjustments.Full control over printingCentauri Carbon offers the function of recording the printing process with a built-in timelapse camera. Users can monitor the print progress live, analyze any errors and document the entire process in high resolution, which is particularly useful for industrial and educational applications.A professional printer for the most demandingELEGOO Centauri Carbon is a device that will meet the needs of both hobbyists and professionals. With a combination of high printing speed, precise temperature control, automatic leveling and compatibility with a wide range of materials, this printer is an excellent choice for anyone looking for reliability and top quality prints.Included Touch screen Spool holder Filament sample Power cord Clog removal tool Allen wrench set (1.5/2.0/2.5/3.0 mm) Screwdriver Spare nozzle/heating table wiper USB Scraper blade User manual Manufacturer ELEGOO Model 50.201.020300 Body Working space 256 x 256 x 256 mm Work platform size 260 x 260 mm Product size 398 x 404 x 490 mm Gross weight 21 kg Speed Printing speed ≤ 500 mm/sec Acceleration 20000 mm/s2 Temperature Ambient temperature 5-40℃ Max heated bed temperature 110℃ Max temperature of the nozzle 320℃ Electrical req

Minis Forum X1-255 AMD Ryzen 7 H255 miniPC, bareboneMinis Forum X1-255 is a high-performance PC that is suitable for both office work and more demanding tasks. Equipped with a powerful AMD Ryzen™ 7 processor and a variety of connectors, it allows you to freely customize your configuration. Thanks to its compact dimensions (128 x 126.5 x 52.5 mm), it will fit virtually anywhere - on a desk, behind a monitor or in a workspace with limited space.Powerful AMD Zen 4-series processorAt the heart of the device is an 8-core and 16-thread AMD Ryzen™ 7 255 processor, based on the Zen 4 architecture. A base clock speed of 3.8 GHz with the ability to accelerate to 4.9 GHz ensures smooth operation in office applications, browsers, and even lighter 3D modeling or video editing.Built-in AMD Radeon™ 780M graphicsThe integrated AMD Radeon™ 780M graphics chip allows for smooth high-definition multimedia and even simple graphics processing. It's a reasonable choice for users who don't need a dedicated graphics card, but still expect smooth image handling.Flexible memory and disk configurationThe X1-255 supports up to 64 GB of DDR5 memory clocked at 5600 MT/s for fast application loading and seamless multitasking. Two M.2 NVMe SSD (PCIe 4.0) slots support the installation of drives up to 4TB each, allowing you to build ultra-fast and high-capacity storage without external solutions.Efficient cooling and quiet operationA turbo fan with a speed of up to 4,000 rpm and a variable-phase material is responsible for cooling. This system effectively maintains a low temperature even under full load, while remaining quiet - in Silent mode it generates just 38 dB.Reliable connectivityThe MiniPC offers a wide selection of ports, including USB4, HDMI 2.1 FRL, DisplayPort, OCuLink, as well as a 2.5G LAN connector. This makes it easy to connect a 4K/8K monitor, high-speed external drive or other accessories. The computer also supports Wi-Fi 7 and Bluetooth 5.4 for stable wireless connectivity.With convenience and installation in mindThe unit comes with a standard VESA mounting hole for easy installation on the back of a monitor, for example. You'll also find a power button, a Kensington Lock slot for theft protection and a dedicated reset hole.Included mini PC power adapter power cable HDMI cable mounting screws x4 M.2 to OCulink adapter card mini PC stand user manual General information Manufacturer Minis Forum Series Elite Mini Model X1-255 Operating System Windows 11 Pro support Dimensions 128 × 126 × 52.5 mm (L × W × H) Weight 0.6 kg Processor (CPU) Processor model AMD Ryzen™ 7 255 Number of cores 8 (Zen 4 architecture) Number of threads 16 Base clocking 3.8 GHz Maximum clocking (Turbo) 4.9 GHz TDP (Performance mode) Fast: 65W / Slow: 65W TDP (Balance mode) Fast: 65W / Slow: 54W TDP (Silent mode) Fast: 55W / Slow: 45W Graphics chip (GPU) Integrated graphics AMD Radeon™ 780M Memory (RAM) Memory type DDR5 (SO-DIMM ×2) Configurations (optional) 0 / 32 / 64 GB Maximum bandwidth 5600 MT/s Maximum capacity 64 GB Storage Drive type 2 × M.2 2280 NVMe SSD (up to 4 TB per slot, PCIe 4.0 x4) Disk (optional) 0 / 1 TB Cooling system Cooling material Variable-phase material CPU fan Turbo fan 7515 mm Max fan speed 4000 rpm Noise level (performance mode) 45 dB / at a distance of 50 cm (MINISFORUM lab data) Noise level (Balance mode) 40 dB / 50 cm Noise level (Silent mode) 38 dB / 50 cm Wireless and wired connectivity Module M.2 2230 with Wi-Fi and Bluetooth Wi-Fi Wi-Fi 7 Bluetooth 5.4 Ethernet connector 2.5 Gigabit LAN (RJ45)Module: RTL8125BG-CG Video outputs HDMI 1 × (up to 8K @ 60Hz / 4K @ 120Hz) DisplayPort (DP) 1 × (up to 8K @ 60Hz / 4K @ 120Hz) USB4 2 × (up to 8K @ 60Hz / 4K @ 120Hz) Audio outputs / inputs Audio outputs HDMI ×1DP ×13.5mm combo jack ×1Speakers: 2 × (2W each) Audio inputs Digital microphone (DMIC): 2 ×3.5mm combo jack: 1 × Ports On the front 1 × USB4 (PD power supply up to 15W)2 × USB Type A (USB 3.2 Gen2)2 × DMIC microphones1 × Combo jack 3.5mm1 × Rese

1920 x 1080 Skārienjūtīgais ekrānsLīdz DCI 4K25 HDMI video ievade1080p60 Ierakstīšana SD kartē2000 cd/m² spilgtumsHDR monitorings, 3D LUT Support:/li>Viļņu forma, vektorskops, fokusa maksimumamarķieri, viltus krāsas, krāsu temperatūraIebūvēts audio, 3,5 mm austiņu ievade port:/li>Barošana caur L sērijas/F970 vai līdzstrāvas ieeju1/4"-20 vītne & iekļauts botas stiprinājums.