5.25 To 3.5

Natec Helix small PC case, great possibilitiesMeet Natec Helix - a micro tower chassis designed for a thoughtful installation of components, including microATX and Mini-ITX motherboards. Front panel equipped with 4 USB ports improves everyday use. Optimal temperatures? Numerous ventilation holes and 80 mm, exhaust fan located on the back of the case will help you ensure them. This is Natec HelixMAIN FEATURESSuitable for Home and OfficeAre you looking for a functional base for your components? Look no further than Natec Helix - a universal case that boasts a simple, yet rigid construction made of metal and ABS, providing optimal protection for your computer's internal components. Its low-key appearance makes it a perfect fit not only for the office or home settings but also wherever a classic solution is needed.Easy access to USB portsDo you need to quickly connect necessary accessories like a pen drive or external drive? Front panel of Natec Helix offers 4 USB Type-A ports (2 × USB 3.0 and 2 × USB 2.0). In addition to peripherals, you can easily connect both headphones and a microphone with the two mini jacks available on the front panel.Choose your favourite componentsDo you value storage options? Natec Helix can house up to six drives! 3 slots for 2.5" SSDs, 1 slot for a 3.5" HDD and 2 hybrid slots for 2.5"/3.5" drives. You can also find the bay for other 5.25" device like DVD or Blue-ray drive. In Natec Helix you can mount a graphics card with a maximum length of 330 mm as well as a tower CPU cooler (up to 148 mm height). What you get is a wide array of configuration options at an affordable price.ADDITIONAL FEATURESCompatible with microATX and Mini-ITX motherboardsSelect the right motherboard and CPU not being bothered about issues with their installation. Natec Helix is compatible with microATX and Mini-ITX standards while having small external dimensions. A large number of slots for hard drives and reasonable space for mounting GPU allows to build efficient PC both for work and entertainment.Keeping it coolOptimal airflow is an important aspect which we have taken into consideration in Natec Helix Pc case. Among other solutions the pre-installed, located on the back of the case, 80 mm fan is responsible for exhausting hot air. You can also install two additional 120 mm fans on the front and side of the case. Fast and simple.

B-158SSK-B Pocket for 3.5" SATA hard drivesFunctions:- Fast installation and disk replacement without drivers- Supports all 3.5" SATA 1.5/3.0/6.0 Gb/s hard drives with a height of up to 2.54 cm (1")- Installation in the bay 5.25"- Aluminum housing provides better cooling- Supports Hot Swap and Easy Swap- The lock protects against unauthorized access. The construction without a fan ensures quiet operation- 12V power connector for an additional fanCooling aluminumThe mobile pocket IB-129SSK-B has an efficient passive cooling system. The housing made of aluminum dissipates heat very well, thus ensuring quiet and stable operation without the need for fan assembly.No carrier = twice as fastDue to the fact that we do not have to mount the hard disk to any housing only directly to the pocket, the assembly is completely without any tools. Thanks to this, we are able to save up to twice as much time. The only thing required is the 5.25 "bay. It supports SATA hard drives with SATA I, II and III speeds.Fanless = quiet operationOur pocket is made entirely of aluminum, the front and back of the pocket (assembly part) is made of hard plastic to ensure full protection. Aluminum is very durable, although it is very light. The main feature of aluminum is that it perfectly dissipates heat, thanks to which the device's operation is completely silent. Optionally, you can connect a 12V fan (not included).Do not worry = closed!To keep the hard drive always protected, a lock has been added. In this way, an unauthorized person will not be able to reach your data. The LED indicator provides information on the access and activity of the hard disk.

Small case, big possibilities Meet the Natec Helix USB C - a micro tower case that will allow you to build a functional computer of small size (compatible motherboards: microATX and mini-ITX) and improve everyday use thanks to the extended front panel with super-fast USB Type-C (standard 10 Gbit/s, USB 3.1) and three additional USB Type-A ports: 2 × USB 3.0 (5 Gbit/s) + 1 × USB 2.0. Optimal temperatures? You will be helped to achieve them by, among others, numerous ventilation holes and an 80-millimeter exhaust fan, which we have mounted in the rear part. This is the Natec Helix. Main features For home and office Are you looking for a functional base for your components? Natec Helix is a universal case that stands out not only with clever solutions, but also with a rigid construction made of metal and ABS, which positively translates into the protection of the computer's interior. Its subdued appearance will make it perfect for the office and home, and wherever classic solutions count. Even faster data transfer Do you want to transfer data faster than before? Use the USB C 3.1 port, which offers 2 times greater data transfer (10 Gbit/s) compared to USB 3.0 (5 Gbit/s). What's more, the front panel will make it easier for you to connect other accessories. All thanks to 3 additional USB type A ports (2 × USB 3.0 and 1 × USB 2.0) and 2 mini jack sockets for headphones and a microphone. Save time and work more efficiently. Choose your favorite components Do you value a large number of media? Natec Helix can accommodate up to 6 drives! 3 places for 2.5 SSD media, 1 slot for 3.5 HDD, and 2 hybrid places for 2.5 / 3.5 drives. There is also a 5.25 bay, e.g. for an optical drive such as a DVD or Blu-ray. Inside the case, you can also mount a graphics card with a maximum length of 330 mm, as well as a tower CPU cooler (up to 148 mm). So you get a wide range of configuration options, all at an affordable price. Additional features Support for microATX and Mini-ITX boards Choose the right motherboard, processor and do not worry about assembly problems. With small external dimensions, the Natec Helix case ensures compatibility with microATX and Mini-ITX motherboards. Combined with a large number of disk spaces and a large space for a graphics card, this allows you to build an efficient computer for work or entertainment (e.g. multimedia). Taking care of the temperature of components Optimal airflow is an important aspect that we took care of in the case of the Natec Helix case. The factory-installed 80 mm fan located in its rear part is responsible for blowing hot air out of the computer. In addition, you can install additional 120mm fans on the front and side of the case. It's quick and easy.

IB-166SSK-B Pocket for 3.5" SATA/SAS hard drivesFunctions:- Fast assembly and installation of hard disk, without installing drivers- Supports all 3.5" SATA formats- Rubber pads reduce vibration and hard drive noise- The special aluminum housing provides excellent cooling- NSS allows disk replacement up to 50,000 times- Installation in the bay 5.25"- The lock protects against unauthorized access- Fanless design for quiet operationQuick changeThis portable pocket is designed for fast and frequent replacement of hard drives. Its unusual NSS mechanism (NSS = no SATA zero) makes it possible to make over 50,000 hard disk changes. This means that, taking into account around 5 hard disk changes during the day, you can use this pocket for at least 50 years.Easy SwapYou do not need tools or screws to mount the hard disk in this pocket. After placing it in the 5.25" bay, simply open the front panel, insert the hard disk and close the panel. Ready.Data safetyThe lock protects against unauthorized removal of the data carrier. Two LED rings not only look elegant, but also inform the user about the status of the disk.Solid materialThe patented NSS (Non Scratch SATA) allows disk replacement up to 50,000 times. This means that if we were replacing a disk 4-5 times a day, the pocket would survive 50 years of work. Special aluminum housing works without a fan, rubber pads protect against damage, vibrations and ensure quiet operation.

IB-129SSK-B Pocket for 3.5 "/ 2.5" SATA / SAS hard drivesFunctions:- 3.5"/2.5" drive bay- Supports all 3.5"/2.5" SATA/SAS 1.5/3.0/6.0 Gb/s disks (1" high)- Installation in the bay 5.25"- Special aluminum housing for excellent heat dissipation- Supports Hot Swap- The lock protects against unauthorized access- The design without a fan ensures quiet operation- 12V power connector for an additional fan. Aluminum has the function of passive heat exchange.Cooling aluminumThe mobile pocket IB-129SSK-B has an efficient passive cooling system. The housing made of aluminum dissipates heat very well, thus ensuring quiet and stable operation without the need for fan assembly.No carrier = twice as fastDue to the fact that we do not have to mount the hard disk to any housing only directly to the pocket, the assembly is completely without any tools. Thanks to this, we are able to save up to twice as much time. The only thing required is the 5.25 "bay. It supports SATA hard drives with SATA I, II and III speeds.Fanless = quiet operationOur pocket is made entirely of aluminum, the front and back of the pocket (assembly part) is made of hard plastic to ensure full protection. Aluminum is very durable, although it is very light. The main feature of aluminum is that it perfectly dissipates heat, thanks to which the device's operation is completely silent. Optionally, you can connect a 12V fan (not included).Do not worry = closed!To keep the hard drive always protected, a lock has been added. In this way, an unauthorized person will not be able to reach your data. The LED indicator provides information on the access and activity of the hard disk.

ICY BOX   IB-173SSK   2-bay Frame for 1x 2,5" and 1x3,5" SATA/SAS HDD     Main features Removable frame for 1x 2.5 "and 1x 3.5" SATA / SAS hard drives Fast hard disk installation and replacement without a carrier Supports SATA I / II / III up to 6 Gbit / s Installation in a standard 5.25 "bay Lock protects against unauthorized access Power switch for both hard drives and LED for operation & access Supports HotSwap

IB-148SSK-B Pocket for 3.5" (8.89 cm) and 2.5" (6.35 cm) SATA/SAS hard diskFunctions:- For 3.5" and 2.5" HDD/SSD SATA/SAS hard drives- Solid workmanship- Metal construction- SATA III and SAS II up to 6 Gb/s- A lock and two screws protect against unauthorized access- Includes a SATA cable (490 mm) with a safety clip- Plug & Play and Hot Swap- Installation in the bay 5.25"- Built-in fan 30x30x10 mmChill and safetyThe pocket has an efficient cooling system. Thanks to the metal housing, the heat can be dissipated by the fan even at full load. The lock and screws we fix during installation give us protection during transport and operation.Solid frameMade of high quality metal, a solid frame for 2.5" or 3.5" SATA/SAS hard drives supports discs with a maximum height of 2.54cm. It fits the standard 5.25" bay, and the built-in 30mm fan ensures active air circulation and is ideal for the industry.The two are saferFor this reason, our pocket has been equipped with a lock that protects the drive against unauthorized access. The front cover can also be secured by screwing two screws.Very fastThe internal chipset supports SATA III and SATA II at 6Gb/s. Thanks to this, even large files are transferred very quickly. If you need to replace your hard disk quickly, Hot Swap and Plug & Play will make things easier. Thanks to them, you can do it without switching the device off and without the need for additional drivers!

Šis mājdzīvnieku būris nodrošinās plašu un drošu vietu jūsu mīluļu fiziskajām aktivitātēm, rotaļām un atpūtai. Izturīgs materiāls: dzīvnieku būris ir izgatavots no pulverkrāsota tērauda, kas ir ļoti izturīgs, viegli kopjams materiāls. Universāla salikšana: būris ir veidots no vairākiem paneļiem, tādēļ to var salikt dažādās formās un izmēros. Plaša vieta: šajā dzīvnieku būrī būs daudz vietas, kur jūsu mazie draugi varēs spēlēties un atpūsties, vienlaikus esot drošībā. Praktiskas durvis: dzīvnieku būrim ir praktiskas durvis, kas mājdzīvnieku kopšanu padarīs daudz ērtāku. Piezīme: Katra produkta iepakojumā ir pievienota salikšanas rokasgrāmata.

Šis mājdzīvnieku būris nodrošinās plašu un drošu vietu jūsu mīluļu fiziskajām aktivitātēm, rotaļām un atpūtai. Izturīgs materiāls: dzīvnieku būris ir izgatavots no pulverkrāsota tērauda, kas ir ļoti izturīgs, viegli kopjams materiāls. Universāla salikšana: būris ir veidots no vairākiem paneļiem, tādēļ to var salikt dažādās formās un izmēros. Plaša vieta: šajā dzīvnieku būrī būs daudz vietas, kur jūsu mazie draugi varēs spēlēties un atpūsties, vienlaikus esot drošībā. Praktiskas durvis: dzīvnieku būrim ir praktiskas durvis, kas mājdzīvnieku kopšanu padarīs daudz ērtāku. Piezīme: Katra produkta iepakojumā ir pievienota salikšanas rokasgrāmata.

Warmup StickyMat paklājs ir grīdas apsildes sistēma, kas paredzēta uzstādīšanai līmjavas slānī zem flīzēm vai izlīdzinošajā maisījumā zem cita veida grīdas apdarēm. Fiksētie paklājā iestrādātā apsildes kabeļa izklājuma attālumi un paklāja pašlīmējošās īpašības nodrošina ātru, vienkāršu un precīzu sistēmas uzstādīšanu regulāras formas telpās Spiedienjutīgā līme nofiksē apsildes paklāju pie grīdas, notur to līdzenu, tādējādi atvieglojot flīžu līmes uzklāšanu. Vienlaikus, ja nepieciešams, apsildes paklāju joprojām var viegli pārvietot Īpaši plānais, daudzslāņu, divkodolu apsildes kabelis ar dubultu moderna fluorpolimēra izolāciju ir īpaši izturīgs un tas droši un viegli pārklājams ar flīzēm Lai nodrošinātu līdzenu un vienmērīgu grīdas virsmu, grīdām ar vinila, paklāja, koka vai citu ar grīdas apsildi saderīgu grīdas apdari, tostarp flīzēm, apsildes paklāju var pārklāt ar izlīdzinošo maisījumu. StickyMat paklāji pieejami ar diviem jaudas variantiem: 150 W/m² un 200 W/m², tāpēc tie ir...