5V 2A adapteris

GOOLOO A6 Gear Air CompressorThe GOOLOO A6 Gear Air Compressor is a compact, cordless device for inflating tires and accessories that combines solid performance with portability. It offers a pressure range of 4–160 PSI, an accuracy of ±2 PSI, and fast inflation—it takes less than a minute to inflate a tire (205/55R16) from 30 to 36 PSI. The built-in 27.75 Wh (7500 mAh) battery allows you to inflate up to 8 car tires, 19 motorcycle tires, 22 bicycle tires, or even 107 balls on a single charge. The device charges via USB-C (5V/2A) in approximately 220 minutes, operates at a noise level below 85 dB, and features a compact design.Precision and Pressure ControlThe easy-to-read display shows current values in real time, allowing you to precisely control the inflation process. Accuracy of ±2 PSI ensures better alignment with the manufacturer’s pressure recommendations, which improves ride comfort and slows tire wear. The auto-shutoff feature stops operation once the set level is reached, so you don’t have to monitor the device.Pre-set modes simplify operationThe compressor is equipped with practical presets tailored to various applications: car, motorcycle, bicycle, ball, and manual mode. This eliminates the need to set parameters from scratch each time—selecting the appropriate mode reduces setup time and minimizes the risk of error.Performance that makes a differenceHigh battery capacity directly translates to real-world capabilities. A single charge is enough to service several vehicles or many small accessories, making the device ideal for both daily use and longer trips. A fill time of less than 1 minute for a standard tire means shorter downtime and greater convenience.Extra support on the roadThe built-in LED flashlight with standard, SOS, and strobe modes enhances safety after dark. It’s a practical solution in emergencies when an additional light source or warning signal is needed.Included GOOLOO A6 Gear Compressor Inflation hose Set of valve adapters (5 pieces) USB-C charging cable User manual Manufacturer GOOLOO Model A6 Gear Pressure range 4–160 PSI Measurement accuracy ±2 PSI Battery capacity 27.75 Wh (7500 mAh) Noise level < 85 dB (at 1 m) Input 5V⎓2A Charging port USB-C Charging time approx. 220 minutes

When the alarm clock rings in the morning, we usually get out of bed with a heavy sigh. So it’s worth organising a wake-up call which will positively tune us into action for the whole day to come. The CR55CHARGE alarm-clock radio will be a great help for this. The double alarm function (the facility of setting two wake-up times) and the snooze function (from 5 to 60 minutes) will be appreciated even by the heaviest sleepers. What’s more, you can decide about the type of alarm you want to be woken up by. You can choose between a classic buzzer or your favourite radio station. And it is this second way which will make you welcome the day with a smile! The CR55CHARGE is also equipped with a radio tuner, which allows you to program 20 stations in its memory. With this feature, you don't have to search all the frequencies every time you turn on the radio to find your favourite. The alarm-clock radio is also capable of charging mobile devices. Moreover, with this model it is possible in two ways. The first is classic wire-based charging. There is a USB port at the back of the device, to which you connect the charging cable for your smartphone or tablet. The second way is wireless charging. Simply place a portable device with its rear side centrally on the top panel of the alarm-clock radio marked with a charging point. An illuminated wireless-charging indicator on the display indicates that the mobile device is charging. Please note that the wireless charging function works only with Qi-capable devices. The current time is shown on a large blue LED display. The digits are clear and legible both day and night. The alarm clock also features a bottom LED backlight, which makes it look very modern at night. The dimming function allows the adjusting of the intensity of the display, so that it does not dazzle the eyes, and remains readable when the room is dark. The sleep mode allows you to set the time after which the device switches off. This is especially useful when listening to the radio while falling asleep. Its optional memory backup ensures that you don’t lose the alarm-clock settings in the event of a power failure. For this purpose, the device must be equipped with an additional CR2032 battery. With the CR55CHARGE alarm clock you will forget about needing several chargers for your mobile devices, and you will be in a good mood every morning! Technical data: PLL FM tuner with 20 preset station memory Clock with dual alarm and snooze Wireless charging USB charging port Large LED display Lower mood light Adjustable dimmer Alarm with radio or buzzer Power adapter: DC 5V 2A Back up time: CR2032 (battery not incl.) Dimensions: 165 x 80 x 93 mm Weight: 0,293 kg

The ZGCINE NPF Battery Multi-Use Charger Adapter is a versatile power solution that supports USB-C PD, USB-A, and D-Tap outputs. It enables fast charging for NP-F batteries and can power cameras, monitors, and other devices. The ZGCINE NPF Battery Multi-Use Charger Adapter is an efficient and multifunctional power solution designed for content creators and filmmakers. With USB-C PD (25W), USB-A, and D-Tap output ports, it allows simultaneous charging and power supply for cameras, monitors, and other devices. Equipped with USB-C PD input and output, USB-A output, and D-Tap output, this adapter ensures flexibility and convenience for on-the-go setups. Its compact design makes it an excellent travel-friendly power solution for professional video production. Key Features: USB-C PD 25W Input & Output for fast charging. USB-A & D-Tap Outputs to power multiple devices. Fast NP-F Battery Charging – Full charge in as little as 78 minutes. Multi-Use Adapter – Can charge batteries and power external gear simultaneously. Compact & Portable – Ideal for travel and on-location shoots. Specifications: USB-C PD Input: 5V/2A, 9V/1.4A, 12V/1.75A USB-C PD Output: 5V/2.8A, 9V/1.9A, 12V/1.7A USB-A Output: 5V/2.8A, 9V/1.9A D-Tap Output: 7.4V/5A

Travel wall charger AXAGON ACU-PQ67D GaN enables fast charging of up to two mobile devices simultaneously. With 67W of total power, the charger can charge laptops, tablets, phones, and other mobile devices at the highest possible speed. The adapter offers not only a standard USB-A connector, but also a reversible USB-C connector. The clear LCD display shows the current charging power.Compact size and high performance are achieved thanks to the use of new GaN technology. Components made of Gallium Nitride operate with high efficiency, enabling high power in a small form factor. The charger is equipped with a Power Delivery 3.0 / Quick Charge 4+ USB Type-C output and a Quick Charge 3.0 USB Type-A output, enabling fast charging not only of smartphones and tablets, but also laptops.Quick Charge 4+ technology enables up to 4x faster phone charging compared to a standard USB charger. Power Delivery 3.0 technology not only supports charging of modern phones, but also enables 67W charging of modern laptops.Apple devices support fast charging, with maximum power depending on the specific model: iPhone 1215 support charging up to 20W, iPhone 16 and 16 Pro up to 24W, iPhone 13 Pro to 15 Pro models and iPhone 17 up to 27W. Higher power is offered by iPhone 16 Pro Max up to 30W and iPhone 17 Pro and Pro Max up to 40W. The charger is also compatible with iPads and Apple MacBook Air and Pro laptops.Samsung Galaxy phones support fast charging Super Fast Charging up to 25W SFC for Galaxy S20S25 series and foldable Z Fold and Z Flip models. Selected Galaxy Ultra models and Galaxy Tab tablets enable even faster charging up to 45W SFC 2.0.Other brands are also supported, such as Motorola, Google Pixel, Xiaomi, Honor, Oppo, OnePlus, Realme and other common phones and tablets. The charger is also suitable for charging laptops with PD 3.0 technology up to 67W, including brands such as Lenovo, HP, Dell, Acer, Asus and others.An advanced output protection system of the charging adapter protects connected devices against damage. Charger functions also ensure recognition of the connected device and selection of the optimal charging speed and process.The power adapter body has a pleasant shape and compact size. Compared to conventional charging adapters with the same parameters, this charger is up to half the size. The combination of small dimensions achieved by GaN technology and a wide input voltage range makes this charger an ideal travel companion. The integrated LCD display clearly shows the current charging power in watts in real time, so you have easy control that the connected device is actually using, for example, fast charging.Input: input voltage AC 100V240V / 1.8A / 5060Hz (WIV function), supports multiple national power standards two-pin Euro plug integrated into the adapter body Outputs: USB-A port QC (phones) max. 30W: 5V/3A, 9V/3A, 12V/2.5A, 15V/2A, 20V/1.5A Charging technologies: QC 3.0, QC 2.0, AFC, SCP, FCP, SMART, Apple 2.4A USB-C port PD (laptops, phones) max. 67W: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.35A, PPS: 3.311V/5A Charging technologies: PD 3.0, PD 2.0, PPS, QC4+, QC 3.0, QC 2.0, SFC 2.0, SFC, AFC, SCP, FCP, SMART, Apple PD Maximum charger output when using multiple ports: 2 devices connected simultaneously USB-C port PD = 45W MAX USB-A port QC = 12W MAX Note: When charging multiple devices simultaneously, individual devices automatically share the required power. The allocated power may change during charging. Supported charging technologies: Standard charging of all devices supporting 5V and charging of Apple iPhone 5, 6, SE, 7. SMART charging up to 5V/4.5A, Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A) and Apple 2.4A (iPad). FCP fast charging using the Huawei Fast Charge Protocol. SCP fast charging (up to 25W) using the Huawei SuperCharge Protocol. AFC fast charging using the Samsung Adaptive Fast Charging protocol. SFC fast charging using the Samsung Super Fast Charging and Super Fast Charging 2.0 protocols. QC fast

3900 mAh talpa Tinka naudoti su įrenginiais, naudojančiais PB-FZ100 tipo bateriją (Sony A7 III, A9) Pratęsia nenutrūkstamą darbo laiką iki 2-4 kartų lyginant su įprasta baterija Išėjimo jungtys: USB - 5V/2.1 A; DC 7.2-8.4V/2A 187 g svoris

The Carlinkit CP2A wireless adapterWant to enjoy wireless pleasure while driving your car? With Carlinkit it will be possible! CP2A adapter is designed for cars with CarPlay and Android Auto function. With it, you will create a space free of tangled cables. What's more, it uses plug&play technology, which makes it convenient and easy to use. And its small size (80×46×13 mm) will make it easy to transport and store. Wireless convenienceWith Carlinkit, you will be able to create a wireless connection from your CarPlay. It shows great compatibility with cars, and supports many popular apps for music or GPS. What's more, it won't interfere with your vehicle's original functions. You will also be able to give voice commands, as it works with assistants such as Siri, for example. Comfort of useCarlinkit CP2A was developed with comfort in mind. It uses plug&play technology. What does this mean? Just plug the device into your car's USB port, and it starts working right away. And it connects to your phone quickly using Bluetooth 5.2. Online updates are also at your disposal to ensure that your device will always work perfectly. Thoughtful design The PCP2A is both a well-thought-out design and a functional device. It won't take up much space, as it stands out for its compact size (80×46×13 mm) and light weight (0.033 kg). What's more, you only need to connect it once to the device of your choice. What does this mean? When you get in the car again, Carlinkit will automatically pair with your phone. Don't waste precious minutes searching for your device again!Included wireless adapter 2x charging cable user manual Manufacturer Carlinkit Model CPC200-CP2A Power input 5V±0.2V 1.0A Power supply output DC 5V±0.2V 1.0A Power consumption 0,75 W WiFi frequency 5150-5250 MHz, 5725-5850 MHz / 2412-2472 MHz Bluetooth version 5.2 802.11ac Antenna Built-in 3 dbi FPC antenna Material ABS PC Supported vehicles Car with factory CarPlay cable Ports LED, Type-C female port, USB female port Product size 80×46×13 mm Product weight 0.033 kg , Bezprzewodowy adapter Carlinkit CP2AChcesz cieszyć się bezprzewodową przyjemnością podczas jazdy samochodem? Z Carlinkit będzie to możliwe! Adapter CP2A przeznaczony jest dla samochodów z funkcją CarPlay oraz Android Auto. Dzięki niemu stworzysz przestrzeń pozbawioną plączących się kabli. Co więcej, wykorzystuje on technologię plug&play, co sprawia, że jest komfortowy i łatwy w użytkowaniu. A niewielkie wymiary (80×46×13 mm) ułatwią jego transport i przechowywanie. Bezprzewodowa wygodnaZ Carlinkit będziesz w stanie stworzyć ze swojego CarPlay i Android Auto bezprzewodowe połączenie. Wykazuje dużą kompatybilność z samochodami, a ponadto wspiera wiele popularnych aplikacji do muzyki czy GPS. Co więcej, nie zakłóci działania oryginalnych funkcji pojazdu, ponieważ pozwala na używanie wbudowanych przycisków multimedialnych np. na kierownicy. Będziesz także w stanie wydawać polecenia głosowe, ponieważ współpracuje on z takimi asystentami jak na przykład Siri. Komfort użytkowaniaCarlinkit CP2A powstał z myślą o komforcie użytkowania. Wykorzystuje technologię plug&play. Co to oznacza? Wystarczy podłączyć urządzenie do portu USB w samochodzie, a już od razu rozpocznie swoją pracę. Zaś z telefonem łączy się szybko przy pomocy Bluetooth 5.2. Do Twojej dyspozycji pozostają także aktualizacje online, dzięki którym zyskasz pewność, że Twoje urządzenie zawsze będzie doskonale działać. Przemyślana konstrukcja Model PCP2A to jednocześnie przemyślana konstrukcja i funkcjonalne urządzenie. Nie zajmie dużo miejsca, ponieważ wyróżnia się kompaktowym rozmiarem (80×46×13 mm) oraz małą wagą (0,033 kg). Co więcej, wystarczy tylko raz połączyć go z wybranym urządzeniem. Co to znaczy? Gdy ponownie wsiądziesz go auta, Carlinkit automatycznie sparuje się z Twoim telefonem. Nie trać cennych minut na ponownie wyszukiwanie urządzenia!W zestawie bezprzewodowy adapter 2x kabel do ładowania instrukcja obsługi Producent Carlinkit Model CPC200-CP2A Wejście

Sunlu FC01 Filament Joining SystemThe SUNLU Filament Connector FC01 is a practical and innovative solution for any 3D printer user who wants to get the most out of every meter of filament. The device allows for quick, precise, and durable joining of filament ends, eliminating waste and effectively reducing printing costs. With rapid heating to 185°C in about 3 minutes, high temperature accuracy (±3°C), broad material compatibility (PLA, ABS, PETG), and intuitive operation, the FC01 ensures reliability and convenience for both beginners and advanced users.Zero waste – maximum use of every filamentForget about throwing away spool ends. With the SUNLU FC01, you can effectively join filament scraps and use them until the very end. This not only saves money but also represents a more eco-friendly approach to 3D printing. Every scrap of material gets a new lease on life, and you print more for less.Create without limits – colorful designs and gradient effectsCombining filaments of different colors opens up entirely new creative possibilities. Create multicolored models, smooth color transitions, or unique visual effects without having to change spools during printing. It’s the perfect solution for those who want to make their projects stand out and give them a unique character.Speed and precision that accelerate your workThe FC01 heats up to operating temperature in just a few minutes, and the splicing process itself takes only 10–15 seconds. Precise temperature control guarantees stable and repeatable results, ensuring that every splice is strong and aesthetically pleasing. You save time and gain the confidence that the filament will perform flawlessly during printing.Versatility and safety in everyday useThe device supports a wide range of materials, offering an operating temperature of up to 240°C. At the same time, the safety features and thermal insulation maintain a safe external temperature, protecting the user during operation. It’s a combination of performance and safety that allows you to use the equipment without worry.Included in the set: Sunlu FC01 filament splicing system x1 USB cable x1 PTFE splicing tube x1 User manual x1 Manufacturer Sunlu Model FC01 Supported materials PLA, ABS, PETG Supported filament diameter 1.75 mm Operating temperature range up to 240°C Operating temperature for PLA approx. 185°C Warm-up time approx. 3 minutes Spooling time 10–15 seconds Temperature accuracy ±3°C Power supply 5V 2A (adapter not included) Housing temperature during operation approx. 50–100°C