Ac Adapter 12V

LOKITHOR JA30000 PRO Jump Starter 46.08Wh 3000AThe LOKITHOR JA3000 PRO is a modern device that combines the functions of a booster, compressor, power bank, and flashlight, designed for maximum performance and ease of use. It generates a peak current of 3000A at 12V, enabling quick vehicle startup in emergency situations. It is equipped with a 46.08Wh LiFePO₄ battery, which ensures stable operation and a long service life. The entire unit is housed in a sturdy, portable case measuring 14.15 × 25.37 × 10.34 cm and weighing 1750 g, which facilitates transport and storage.Effective engine starting and reliability in various conditionsThe device allows for starting gasoline engines up to 9.0L and diesel engines up to 7.0L, ensuring a wide range of applications. With the ability to perform up to 50 starts on a single charge, the user can count on high performance in emergency situations. Stable power delivery regardless of ambient temperature eliminates the problem of a dead battery and increases operational reliability in all conditions.Powerful air compressor and fast inflationThe integrated compressor with a maximum pressure of 150 PSI allows for efficient inflation of car, motorcycle, and bicycle tires, as well as various types of recreational equipment. The ability to set the target pressure, the auto-shutoff function, and the selection of units and access to presets make operation simple and safe. High performance allows you to inflate a tire in just a few minutes, and the included nozzles let you adapt the device to many applications—from vehicle wheels to balls and inflatable accessories.Durable battery, long standby time, and device charging capabilityThe LiFePO₄ technology used ensures over 2,000 charge cycles, translating to years of use without a loss of performance. Low self-discharge allows the device to remain on standby for up to 24 months. Support for 60W fast charging enables a full charge in about an hour. USB-A and USB-C ports allow you to power smartphones, tablets, and laptops, while the bidirectional charging feature enhances the device’s functionality in various situations.Advanced safety features, intuitive operation, and durable constructionThe JA3000 PRO model is equipped with 10 safety systems that protect against short circuits, reverse polarity, overcharging, overloading, and overheating, enhancing safety during use. The clear digital display allows you to quickly check the charge level and settings, such as pressure values. The ergonomic handle makes it easy to carry, and the well-thought-out design improves comfort while working both in the garage and in the field. The built-in 300-lumen LED flashlight offers standard, strobe, and SOS modes, enhancing safety at night and in emergency situations. The rugged housing with a heat dissipation system and reinforced corners protects the device from damage and ensures resistance to high and low temperatures.Included Jump starter Engine jump-start clamps Inflation hose and nozzle adapters USB-A to USB-C cable Manufacturer LOKITHOR Model JA3000 PRO Voltage compatibility 12V Battery capacity 46.08Wh (3600 mAh) Battery type LiFePO4 (LFP) Peak current 3000 A Lifespan over 2000 cycles AC/DC input voltage USB-C 60W Charging output USB-A 12V/1.5A, USB-C 20V/3A Maximum vehicle battery capacity Gasoline ≤ 9.0L, Diesel ≤ 7.0L USB-A (output) 12V / 1.5A USB-C (input/output) 20V / 3A LED flashlight 300 lumens, SOS / Strobe mode Standby time up to 24 months (approx. 720 days) Dimensions 14.15 × 25.37 × 10.34 cm (5.57"L x 9.99"W x 4.07"H) Weight 1750 g

LOKITHOR J3250 Pro 74.24Wh 3250A Jump StarterThe LOKITHOR J3250 PRO is a high-performance car starter with a peak current of 3250A, designed to start gasoline engines up to 9.5L and diesel engines up to 7.5L. The unit uses a modern LiFePO4 (LFP) battery, offering over 8,000 charge cycles at 50% discharge, which significantly extends service life and reduces operating costs. This model combines the functions of a jump starter and a 100W power bank with fast, bidirectional charging—a full charge takes approximately 60 minutes. Its robust construction, advanced safety features, and resistance to harsh conditions make it ideal for both everyday use and emergency situations.High power and wide range of applicationsThe starter provides a 3250A cranking current, enabling it to start a variety of vehicles—from motorcycles and passenger cars to SUVs, pickups, and larger commercial vehicles. Thanks to its support for large engines, it performs well in both everyday use and when working in more challenging off-road conditions.LiFePO4 technology and long service lifeThe lithium iron phosphate battery used guarantees exceptional durability and stable performance over a long period of time. Over 8,000 charge cycles at partial discharge translate to many years of use without any drop in performance. Additionally, the very low self-discharge rate (0.66 mAh) allows the device to remain ready for use for up to 42 months after a full charge.Fast charging and power bank functionThe built-in 74.24Wh power bank allows you to power mobile devices such as smartphones or laptops. 100W bidirectional USB-C fast charging allows you to quickly charge the starter itself as well as connect other devices. The device offers various ports, including USB-A, USB-C, and a DC output, which increases its versatility.Smart systems and safetyThe J3250 PRO model is equipped with ConnectMax technology, which automatically analyzes the connection quality with the battery and detects potential issues, such as dirt or poor contact. The entire system is supported by as many as 10 safety systems, protecting against reverse polarity, short circuits, overheating, overloading, and overcharging, among other things. A clear display shows voltage and any errors, facilitating safe use.Durability and Additional FeaturesThe IP65-rated housing protects the device from water and dust, allowing it to be used in harsh weather conditions at temperatures ranging from -4°F to 140°F. The built-in 400-lumen LED flashlight offers standard, strobe, and SOS modes, enhancing safety after dark.Simple operation and package contentsThe device is intuitive to use—in standard mode, simply connect the clamps, start the unit, and start the vehicle. Boost mode allows for starting even with very low battery voltage. Its compact dimensions (10.67 × 3.78 × 8.34 inches) make it easy to store, and the kit includes cables with clamps, a manual, and a carrying bag.Included Jump starter 12V adapter USB-A to USB-C cable USB-C to USB-C cable User manual Manufacturer LOKITHOR Model J3250 PRO Voltage compatibility 12V Battery capacity 74.24 Wh (5800mAh) Battery type LiFePO4 Peak current 3250 A Operating temperature -20°C to 60°C (-4°F ~ 140°F) Lifespan 8000 cycles AC/DC input voltage USB-C 100W, DC 20V/5A 100W Charging output USB-A 12V/1.5A 18W, USB-C 20V/5A 100W, DC 12V/10A Maximum vehicle battery capacity Gasoline ≤ 9.5L, Diesel ≤ 7.5L Protection rating IP65 USB-A (output) 12V / 1.5A 18W USB-C (input/output) 5–20V = 5A, max 100W DC output (power mode) 12V / 10A LED flashlight 400 lumens, SOS / Strobe mode Standby time 42 months (0.66mAh self-discharge, 1260 days) Dimensions 10.67" L x 3.78" W x 8.34" H

ZEUSLAP P16KT Portable MonitorThe ZEUSLAP P16KT portable monitor with a 16-inch touchscreen is a compact solution that combines 2.5K resolution (2560 × 1600), a refresh rate of up to 144 Hz, an IPS panel, and 10-point touch support. It offers 500 nits of brightness, wide 178° viewing angles, and 100% sRGB coverage, resulting in a clear, smooth, and accurately reproduced image. Thanks to USB-C and mini HDMI ports and Power Delivery support, the monitor works well both with a laptop and when connected to a smartphone or console, ensuring great flexibility of use.An image that makes a differenceThe 16-inch screen with a resolution of 2560 × 1600 (2.5K) offers a clear and detailed image that makes it easier to work with text, spreadsheets, or graphics. The 16:10 aspect ratio provides more vertical workspace, which is particularly useful for multitasking. With 500 nits of brightness, the screen remains readable even in brighter conditions, enhancing your comfort when working outside the office.Smoothness and responsivenessA refresh rate of up to 144 Hz (via USB-C) ensures a smooth image, noticeably improving the experience of viewing dynamic content. Scrolling, animations, and games look more natural and stutter-free. The fast response time minimizes motion blur, which is especially important during fast-paced scenes.Natural colors and a wide color gamut100% sRGB coverage and support for 1.06 billion colors (8-bit + FRC) make the image vivid yet natural. Tone transitions are smooth, enhancing the quality of videos and photos. This solution also works well for simple graphic tasks and content editing.Touchscreen – more convenient operation10-point touch allows for intuitive control without the need for additional devices. Gesture support speeds up work and makes navigating apps easier. This is a particularly convenient solution when traveling or when desk space is limited.Wide viewing angles and IPS panelThe IPS panel with a 178° viewing angle ensures consistent colors and contrast regardless of the viewing angle. This keeps the image clear for both a single viewer and when watching together. This increases the monitor’s versatility across various applications.Easy connection and powerUSB-C and mini HDMI ports allow for quick connection to various devices without complicated setup. The Power Delivery feature lets you power the monitor and charge other devices simultaneously, reducing cable clutter. Support for extended and mirrored display modes gives you greater flexibility in organizing your workflow.Mobility without compromiseThe slim design and weight of less than 1 kg mean the monitor fits easily into a bag alongside a laptop. This is a practical solution for people who work on the go or frequently change their workspace. This way, you can always have an extra screen at your fingertips without sacrificing convenience.Included ZEUSLAP P16KT Monitor AC adapter USB-C to USB-C cable x 2 Mini HDMI cable USB to USB-C cable User manual Manufacturer ZEUSLAP Model P16KT Screen 16 inches, IPS (Oxide TFT-LCD) Resolution 2560 × 1600 (Ultra HD), 188 PPI Aspect ratio 16:10 Refresh rate up to 144 Hz (USB-C), 120 Hz (HDMI) Brightness 500 cd/m² Contrast ratio 1200:1 Colors 1.06 billion (8-bit + FRC) Color coverage 100% sRGB, ~79% DCI-P3, 76% NTSC Response time approx. 3 ms Viewing angles 178° Touchscreen yes, 10-point Speakers 2 × 1W Power supply 12V / 2.5A (Power Delivery) HDCP version 1.4 Dimensions approx. 357 × 235 × 10 mm Weight approx. 950 g

Euhomy CF001-35GR car refrigerator, 30L.You no longer have to give up access to fresh produce and cold drinks during long car trips. The Euhomy CF001-35GR is a 30L car refrigerator that replaces your home freezer or refrigerator. Thanks to a powerful compressor, the device quickly cools the contents down to -20°C - without the need for ice. It will work well in the car, camper, camping, in the garden and even at home. Quiet operation, energy-saving ECO mode and the ability to be powered from both a home and car outlet make it a practical piece of equipment for any driver. Operation is made easy with an app.Fast cooling without iceEuhoma's CF001-35GR car refrigerator uses a powerful compressor to provide fast and efficient cooling from -20°C to 20°C. So there's no need to freeze cooling cartridges or limit yourself to ready-made solutions - just plug in the refrigerator and set the right temperature.Space for provisions for several peopleWith a capacity of 30 liters, you can store provisions for a day's travel or a weekend trip. The Euhomy CF001-35GR refrigerator holds bottles and cans, as well as fruit, snacks or frozen food. The removable inner basket makes it easy to organize and clean. It also makes it easier for you to take out specific products without having to pull everything out.Quiet operationThe noise generated by the refrigerator does not exceed 45 dB, which you will appreciate during the night in the camper - your sleep will certainly not be disturbed. So the device is also suitable for home use - as a portable refrigerator in a bedroom or a child's room.Power wherever you areThe device works on both direct current (12V/24V - car, camper) and alternating current (110-240V - household outlet). The appropriate cables are included, so you don't need to buy anything extra. The refrigerator can also be connected to a power station or photovoltaic panel (these items are not part of the kit) for full independence in the field.Intuitive control panelThe built-in digital display and intuitive buttons allow you to easily set the temperature, turn on the refrigerator and switch between ECO and MAX modes. In the former, the unit uses only 45W of energy - ideal for long stops. MAX mode (60W) provides fast cooling when you're pressed for time, such as after a load of fresh produce.Resilient and ready to goThe shock-resistant design protects the refrigerator from damage while driving on rough roads. The handle and removable inner basket make transporting and loading convenient even when traveling. In addition, 3-layer thermal insulation keeps the refrigerator cool for longer even when unplugged. Built-in car battery discharge protection works in three levels. The device automatically cuts power if the voltage drops below a set threshold. This allows you to use it for many hours without worrying about problems with starting the car.Compatibility with the appFrom the app, you can adjust settings, manage operating modes and check current parameters. Enjoy remote operation wherever you are!Included: Euhomy CF001-35GR car refrigerator. DC power cord AC power adapter Operating instructions Removable basket Manufacturer Euhomy Model CF001-35GR Capacity 30 l Working temperature from -20°C to 20°C Operating modes ECO, MAX Noise level ≤45 dB Power supply 12/24 V DC (cigarette lighter socket - car, camper), 110-240 V AC (household outlet), power station, photovoltaic panel Application support Yes

FOSSIBOT F1800 1800W Power StationThe FOSSIBOT F1800 is a portable power station with 1800W of power and a capacity of 1024Wh, designed for emergency power supply to home appliances, mobile work, camping, and RV travel. The model uses durable EVE® LiFePO4 cells, which provide up to 4,000 charge cycles while retaining over 80% of their capacity, ensuring long-lasting and reliable performance. The device supports fast AC charging up to 1200W, allowing a full charge in approximately 68 minutes, and as little as 40 minutes when using both AC and solar charging simultaneously. Its compact design weighing 11.25 kg, quiet operation at around 30 dB, and UPS function with a switching time of less than 10 ms make the station well-suited for use both at home and on the go.Stable power supply for various devicesThe FOSSiBOT F1800 offers two 220–240V AC outlets with pure sine wave output and a total power of up to 1800W, allowing you to safely power consumer electronics, laptops, routers, small appliances, or travel gear. Users also have access to a 12V/10A car port, an 18W USB-A port, and two USB-C ports supporting up to 140W charging when used individually. This solution allows for convenient charging of modern mobile devices without the need for additional power adapters. However, it’s worth noting that when multiple USB-C ports are used simultaneously, the power output is limited according to the manufacturer’s specifications; therefore, the highest performance is available when using a single port.Fast charging and solar power supportThe device offers several charging methods, making it easy to adapt to your specific usage conditions. 1200W AC mains charging allows you to quickly prepare the station for use before a trip or in the event of a power outage. Support for solar panels up to 500W enables the use of renewable energy while off the grid. Additionally, the model supports simultaneous AC and solar charging with a combined power of up to 1700W, which significantly reduces recharge time. The built-in MPPT controller helps utilize solar energy more efficiently and stabilizes the charging process.Smart energy management and convenient operationECO mode automatically optimizes the use of energy from the battery and solar panels, helping to reduce energy consumption and extend battery life. The BMS safety system ensures stable operation of the device and protects against overloading, overheating, and over-discharging. Thanks to Wi-Fi and Bluetooth connectivity and the FOSSiBOT app, users can monitor battery levels, control energy consumption, and manage power outputs in real time. The device’s quiet operation makes the station suitable for nighttime use, in a camper, tent, or indoors.Compact design and emergency power readinessThe FOSSiBOT F1800 is designed for convenient transport and everyday use. Its compact dimensions of 371 × 206 × 258 mm make it easy to store the device at home, in a car, or in a camper, while its relatively low weight enhances mobility. The UPS function with a switchover time of less than 10 ms allows you to maintain power to important devices during sudden power outages. This ensures that your router, laptop, or medical devices can continue operating without noticeable interruptions. The combination of high capacity, fast charging, and quiet operation makes the F1800 model ideal for many everyday and emergency applications.Included FOSSiBOT F1800 Power Station 1.5 m AC charging cable 1.5 m solar charging cable 1.5 m car charging cable Accessory bag User manual Manufacturer FOSSiBOT Model F1800 Battery capacity 1024Wh Battery type LiFePO4 (EVE®) Battery lifespan up to 4,000 cycles (to retain over 80% capacity) AC output power 1,800W Peak power 3,600W AC Outlets 2 × 220–240V, 50/60Hz, pure sine wave USB-A Port 1 × up to 18W USB-C Port 2 × up to 140W per port DC Output 1 × 12V/10A (car socket) AC input 1200W Solar input max. 500W, 12–60V, max. 15A Car input 12V/10A AC charging 68 minutes Solar charging 2 hours AC

Huion Kamvas 22 Plus graphics tabletLooking for hardware that can match your precision? The Huion Kamvas 22 Plus is a graphics tablet for those who create in earnest - designers, illustrators, concept artists. With a 21.5-inch full HD screen, an impressive 140% sRGB color space and quantum-dot technology, it delivers incredible image quality and accuracy in rendering every stylus stroke. Add to that full lamination, anti-reflective glass and USB-C connectors, and you have a tool that fits naturally into your work rhythm. Check out what it can do!A screen that impressesThe Kamvas 22 Plus features a 21.5-inch IPS screen with a resolution of 1920 × 1080 px (Full HD) and an aspect ratio of 16:9. quantum-dot technology has achieved coverage of 140% of the sRGB color space, guaranteeing vivid, intense colors and impressive image depth. The 1200:1 contrast ratio further highlights details and chiaroscuro, while the 16.7 million (8-bit) color depth makes every tonal transition look natural and smooth.Realistic drawing experienceKamvas 22 Plus gives an incredibly realistic drawing experience - just like sketching on a piece of paper. This is thanks to the full lamination, which eliminates the gap between the screen and glass, and the matte, anti-reflective glass with etching finish, which not only protects against light reflections, but also gives a pleasant resistance under the pen - exactly like working on a traditional medium. Parallax is virtually imperceptible, so the cursor precisely follows every movement of your hand. And with a 178° viewing angle, you can look at the screen from either side and still enjoy a clear, consistent image - even in bright light.Less fatigue for your eyesThe low blue light technology used effectively filters out harmful blue light, reducing eye fatigue during long hours of work. This is especially important if you spend days drawing, designing or retouching.A stylus that keeps up with your handThe Kamvas 22 Plus uses the PW517 pen created with PenTech 3.0 technology. Thanks to a lower magnetic core, the pen works precisely and steadily, without lag or vibration. You have 8192 levels of pressure, angle recognition up to ±60°, and accuracy reaching ±0.3 mm. All to make drawing shadows, lines and details as natural as possible.Two USB-C ports and connectivity flexibilityThe tablet is equipped with two USB-C ports for connecting to a computer, laptop, console or Android phone. An additional USB-A port, on the other hand, allows convenient connection of peripherals such as a keyboard, flash drive or external drive. This allows the Kamvas 22 Plus to function as a screen extension or a standalone tool for work and entertainment - on a large 21.5-inch display.Stable, ergonomic and ready to goThe adjustable metal stand allows you to angle the screen from 20° to 80°. This allows you to comfortably adjust your body position and keep your spine comfortable while working. The slim case and weight of only 3.9 kg (with stand) make the tablet, although stable, still a relatively mobile tool for work.Compatibility without limitsKamvas 22 Plus works with Windows 7 and later, macOS 10.12+, Linux and Android (USB 3.1 DP1.2). It supports popular graphics and design applications, so you can use Photoshop, Illustrator, Clip Studio Paint, Krita and many others without any problems.Included graphics tablet battery-free stylus stylus holder replaceable nibs (inside the stylus holder) pen nib clip (inside the stylus holder) power cord power adapter cleaning cloth USB-C cable user manual warranty card Manufacturer Huion Model GS2202 Color dark grey Dimensions 546 x 323 x 19~26.7 mm Working area 476.64 x 268.11 mm Net weight 3.9 kg (with stand) Stand Adjustable stand 20°~80° Video interface USB-C, fully functional USB-C Input voltage AC 100-240V, 50/60Hz Output voltage 12V 3A Power consumption ≤24W Power consumption in standby mode ≤0,3 W Operating temperature and humidity 0-40°C, 20-80% Storage temperature and humidity -20°C~60°

The VariZoom VZTFT7U Monitor Kit is a complete 7″ on-camera monitoring solution, featuring a bright LCD display, battery system, mounting accessories, and protective case—ideal for external viewing, remote monitoring, and portable playback in professional video production. The VariZoom VZTFT7U Monitor Kit is an all-in-one external monitoring package designed to enhance on-camera viewing and provide greater flexibility for filmmakers and videographers. Centered around the VZ-TFT7 7″ LCD/LED monitor, this kit offers a sharp, vivid display in a 16:9 aspect ratio, making it ideal for accurate framing and monitoring during shoots. This versatile monitor can be used as an on-camera viewfinder alternative, a remote viewing display, a field monitor, or even a portable playback screen. With support for both 4:3 and 16:9 aspect ratios, as well as automatic switching between NTSC and PAL standards, it adapts easily to various production environments. Designed with portability in mind, the monitor features a lightweight and rugged build, making it suitable for both studio and field use. The included VZ-702M rechargeable Li-Ion battery kit ensures extended operation, while the universal AC adapter allows for continuous power when needed. Additional accessories such as a swivel shoe mount, sun hood, and padded carrying case complete the package, delivering a practical and cost-effective monitoring solution. Whether you're shooting in the field or building a compact studio setup, the VZTFT7U kit provides everything you need for reliable and convenient on-camera monitoring. Key Features Complete 7″ on-camera monitor kit with battery and mounting system Bright and sharp 7″ LCD/LED display (16:9 aspect ratio) Switchable aspect ratio (4:3 / 16:9) Compatible with NTSC and PAL (auto-switching) Lightweight, compact, and rugged design Low power consumption (approx. 4.5W) for extended battery life Ideal for on-camera monitoring, remote viewing, and playback Includes swivel shoe mount for flexible positioning Sun hood for improved visibility in bright environments Padded case for safe transport and storage 1 × VZ-TFT7 7″ Monitor 1 × VZ-702M Rechargeable Li-Ion Battery Kit 1 × AC Adapter (100–240V) 1 × Swivel Shoe Mount 1 × Sun Hood (VZ-HD7) 1 × Padded Carrying Case (VZ-CC) 1 × 4′ RCA Cable Screen Size: 7″ Display Type: LCD/LED Aspect Ratio: 16:9 (switchable to 4:3) Power Consumption: approx. 4.5W Power Input: 12V Video Standards: NTSC / PAL (auto-detect) Design: Lightweight and portable

LaserPecker 2 Suit Version LaserPecker 2 is a laser that combines performance, versatility and mobility. With its advanced technology and intuitive operation, the device opens up new possibilities in the field of object personalization. It is ideal for professionals and amateurs wishing to explore the world of laser engraving. Engraving photos and a variety of materials The LaserPecker 2 stands out for its ability to engrave photos from an album or camera, allowing users to create unique, personalized works. The device has the ability to work on a variety of materials, such as wood, metal, leather and plastic, making it an extremely versatile tool, ideal for a variety of projects. Mobility and performance Despite its small size, the LaserPecker 2 is an extremely powerful device. Its compact design makes it easy to carry and allows engraving in places that are difficult to reach with other devices. This makes it ideal for those who change their workspace frequently or work with objects of unusual form. Electric stand with adjustable focal length The electric stand is another asset of this device. It allows you to precisely adjust the focal length using the side buttons, which increases the accuracy and quality of engraving. In addition, the ability to hold the laser at the desired angle allows for optimal adjustment to the engraved surface. Compatibility and supported formats The LaserPecker 2 also stands out for its excellent compatibility with various operating systems, such as iOS, Android, macOS and Windows. Support for a wide range of file formats, including jpg, svg, png, bmp and many others, makes this device extremely versatile. Advanced laser technology The LaserPecker 2 is a device equipped with a 5000mW NICHIA laser diode with a wavelength of 450nm, which provides outstanding precision and engraving performance. Its ability to work at 1K, 1.3K and 2K resolutions enables clear and detailed effects on a wide range of materials. The device has an impressive precision of up to 0.025mm, which guarantees exceptional quality of final products. This makes the LaserPecker 2 suitable for intricate and precise projects, both at home and in professional applications. Included Laser Power cable with power adapter Electric stand LaserPecker Versatile Electric Roller Laser cover USB cable x 2 Protective goggles Ruler Wrenches and screws Brand LaserPecker Model L2 Version number 2021-7A Laser type 450nm NICHIA Diode Laser Output power of the laser source 5000mW Data transmission Bluetooth 5.0 Supported formats jpg, svg, png, bmp, G code, CAD, AI, CDR, dwr and more Compatibility iOS 9.0 and above, Android 6.0 and above, macOS 10 and above, Windows 10 and above Power input DC (12V, 5A), AC (100-240V, 50-60Hz) Power 5W Operating temperature range 0°C-65°C Operating humidity range 5%~80% Safety certification EC 60825-1, CE, ROHS, FCC, FDA, CDRH registration IEC 60825-1, NCC, KC, UKCA, TECLEC Engraving speed 800mm/s Precision 0.025mm Engraving area 2000mm Resolution 1K/1.3K/2K Distance 110nm Viewing speed 3750mm/s Weight 2.2kg Dimensions Laser unit: 162.5 x 60 x 122mm, electric stand: 194 x 153.5 x 236mm Continuous operation time 168h Lifetime 10000h