ac dc 12v

Euhomy CF001-35GR car refrigerator, 30L.You no longer have to give up access to fresh produce and cold drinks during long car trips. The Euhomy CF001-35GR is a 30L car refrigerator that replaces your home freezer or refrigerator. Thanks to a powerful compressor, the device quickly cools the contents down to -20°C - without the need for ice. It will work well in the car, camper, camping, in the garden and even at home. Quiet operation, energy-saving ECO mode and the ability to be powered from both a home and car outlet make it a practical piece of equipment for any driver. Operation is made easy with an app.Fast cooling without iceEuhoma's CF001-35GR car refrigerator uses a powerful compressor to provide fast and efficient cooling from -20°C to 20°C. So there's no need to freeze cooling cartridges or limit yourself to ready-made solutions - just plug in the refrigerator and set the right temperature.Space for provisions for several peopleWith a capacity of 30 liters, you can store provisions for a day's travel or a weekend trip. The Euhomy CF001-35GR refrigerator holds bottles and cans, as well as fruit, snacks or frozen food. The removable inner basket makes it easy to organize and clean. It also makes it easier for you to take out specific products without having to pull everything out.Quiet operationThe noise generated by the refrigerator does not exceed 45 dB, which you will appreciate during the night in the camper - your sleep will certainly not be disturbed. So the device is also suitable for home use - as a portable refrigerator in a bedroom or a child's room.Power wherever you areThe device works on both direct current (12V/24V - car, camper) and alternating current (110-240V - household outlet). The appropriate cables are included, so you don't need to buy anything extra. The refrigerator can also be connected to a power station or photovoltaic panel (these items are not part of the kit) for full independence in the field.Intuitive control panelThe built-in digital display and intuitive buttons allow you to easily set the temperature, turn on the refrigerator and switch between ECO and MAX modes. In the former, the unit uses only 45W of energy - ideal for long stops. MAX mode (60W) provides fast cooling when you're pressed for time, such as after a load of fresh produce.Resilient and ready to goThe shock-resistant design protects the refrigerator from damage while driving on rough roads. The handle and removable inner basket make transporting and loading convenient even when traveling. In addition, 3-layer thermal insulation keeps the refrigerator cool for longer even when unplugged. Built-in car battery discharge protection works in three levels. The device automatically cuts power if the voltage drops below a set threshold. This allows you to use it for many hours without worrying about problems with starting the car.Compatibility with the appFrom the app, you can adjust settings, manage operating modes and check current parameters. Enjoy remote operation wherever you are!Included: Euhomy CF001-35GR car refrigerator. DC power cord AC power adapter Operating instructions Removable basket Manufacturer Euhomy Model CF001-35GR Capacity 30 l Working temperature from -20°C to 20°C Operating modes ECO, MAX Noise level ≤45 dB Power supply 12/24 V DC (cigarette lighter socket - car, camper), 110-240 V AC (household outlet), power station, photovoltaic panel Application support Yes

FOSSIBOT F800 800W Charging StationThe FOSSIBOT F800 is a portable power station with a continuous output of 800 W and a capacity of 512 Wh, designed for travel, camping, mobile work, and emergency power at home. The model uses durable LiFePO4 batteries that provide over 3,500 charge cycles while maintaining high battery performance. The station supports pure sine wave output, allowing it to safely power consumer electronics, laptops, small appliances, and audio-visual equipment. The device offers fast AC charging, solar charging capability, and a wide range of ports, including 3 USB-C ports, USB-A, AC, and DC outputs. An additional advantage is the UPS function with a switchover time of less than 10 ms, which helps maintain power to selected devices during temporary power outages.Stable power for everyday and emergency useThe FOSSIBOT F800 offers an output power of up to 800 W, with a peak power of 1600 W. This allows you to power devices that require higher power consumption at startup, increasing the station’s compatibility with various equipment. Thanks to the use of a pure sine wave, the device provides a stable and safe power supply for more sensitive electronics. The station is ideal for powering laptops, monitors, lighting, routers, coffee makers, and travel devices. Its compact design and convenient handle make it easy to carry and use both at home and on the go.LiFePO4 Battery and BMS Safety SystemThe built-in LiFePO4 cells are distinguished by their high durability and greater operational safety compared to classic lithium-ion batteries. A lifespan exceeding 3,500 cycles allows you to use the station for many years without significant loss of capacity. Operational safety is ensured by an intelligent BMS system, which protects the device against overcharging, over-discharging, short circuits, overloading, and excessive temperatures, among other things. The UPS function with fast switching under 10 ms helps reduce the risk of sudden shutdown of connected devices during a power outage. As a result, the station can serve as an additional safeguard for essential home and office electronics.Fast charging and a wide selection of portsThe F800 model can be charged in several ways—from a wall outlet, solar panels, or a car socket. AC charging with up to 400 W allows the device to be fully charged in about 1.6 hours, reducing the wait time between uses. Support for a solar input of up to 200 W enables the use of solar energy during travel and outdoor activities. The station is equipped with 1 AC outlet, 2 USB-A ports, 3 USB-C ports, and 12 V DC outputs, allowing you to conveniently charge or power multiple devices simultaneously. The USB-C port with up to 100 W of power enables, among other things, fast charging of modern laptops and smartphones.Clear display and convenient operationThe front panel of the device features an LCD screen displaying key information about the station’s operation, such as battery level, input and output power, and charging status. Separate control buttons for the AC, USB, and LED lighting sections enhance the convenience of daily use. The built-in LED lamp is useful during power outages, evening camping, or working after dark. The housing is designed for easy transport, and its compact size and weight of 6.5 kg make it easy to store and carry. The package is complemented by a 5-year warranty and safety certifications confirming the product’s compliance with required standards.Included FOSSIBOT F800 Power Station AC power cable Solar charging cable User manual Manufacturer FOSSIBOT Model F800 Color green Battery capacity 512 Wh Battery type LiFePO4 (LFP) Battery life over 3,500 cycles to 80% capacity Continuous AC power 800 W Peak power 1,600 W Inverter type pure sine wave UPS function yes, switchover time < 10 ms AC output 1 x AC 800W USB-C 3 ports (2 x 20 W, 1 x 100 W) USB-A 2 x max. 18 W DC output 12V/10A DC6530 output 12V/10A Max. AC input power 400 W Max. solar input power 200 W AC charging app

FOSSIBOT F1800 1800W Power StationThe FOSSIBOT F1800 is a portable power station with 1800W of power and a capacity of 1024Wh, designed for emergency power supply to home appliances, mobile work, camping, and RV travel. The model uses durable EVE® LiFePO4 cells, which provide up to 4,000 charge cycles while retaining over 80% of their capacity, ensuring long-lasting and reliable performance. The device supports fast AC charging up to 1200W, allowing a full charge in approximately 68 minutes, and as little as 40 minutes when using both AC and solar charging simultaneously. Its compact design weighing 11.25 kg, quiet operation at around 30 dB, and UPS function with a switching time of less than 10 ms make the station well-suited for use both at home and on the go.Stable power supply for various devicesThe FOSSiBOT F1800 offers two 220–240V AC outlets with pure sine wave output and a total power of up to 1800W, allowing you to safely power consumer electronics, laptops, routers, small appliances, or travel gear. Users also have access to a 12V/10A car port, an 18W USB-A port, and two USB-C ports supporting up to 140W charging when used individually. This solution allows for convenient charging of modern mobile devices without the need for additional power adapters. However, it’s worth noting that when multiple USB-C ports are used simultaneously, the power output is limited according to the manufacturer’s specifications; therefore, the highest performance is available when using a single port.Fast charging and solar power supportThe device offers several charging methods, making it easy to adapt to your specific usage conditions. 1200W AC mains charging allows you to quickly prepare the station for use before a trip or in the event of a power outage. Support for solar panels up to 500W enables the use of renewable energy while off the grid. Additionally, the model supports simultaneous AC and solar charging with a combined power of up to 1700W, which significantly reduces recharge time. The built-in MPPT controller helps utilize solar energy more efficiently and stabilizes the charging process.Smart energy management and convenient operationECO mode automatically optimizes the use of energy from the battery and solar panels, helping to reduce energy consumption and extend battery life. The BMS safety system ensures stable operation of the device and protects against overloading, overheating, and over-discharging. Thanks to Wi-Fi and Bluetooth connectivity and the FOSSiBOT app, users can monitor battery levels, control energy consumption, and manage power outputs in real time. The device’s quiet operation makes the station suitable for nighttime use, in a camper, tent, or indoors.Compact design and emergency power readinessThe FOSSiBOT F1800 is designed for convenient transport and everyday use. Its compact dimensions of 371 × 206 × 258 mm make it easy to store the device at home, in a car, or in a camper, while its relatively low weight enhances mobility. The UPS function with a switchover time of less than 10 ms allows you to maintain power to important devices during sudden power outages. This ensures that your router, laptop, or medical devices can continue operating without noticeable interruptions. The combination of high capacity, fast charging, and quiet operation makes the F1800 model ideal for many everyday and emergency applications.Included FOSSiBOT F1800 Power Station 1.5 m AC charging cable 1.5 m solar charging cable 1.5 m car charging cable Accessory bag User manual Manufacturer FOSSiBOT Model F1800 Battery capacity 1024Wh Battery type LiFePO4 (EVE®) Battery lifespan up to 4,000 cycles (to retain over 80% capacity) AC output power 1,800W Peak power 3,600W AC Outlets 2 × 220–240V, 50/60Hz, pure sine wave USB-A Port 1 × up to 18W USB-C Port 2 × up to 140W per port DC Output 1 × 12V/10A (car socket) AC input 1200W Solar input max. 500W, 12–60V, max. 15A Car input 12V/10A AC charging 68 minutes Solar charging 2 hours AC

LaserPecker 2 Suit Version LaserPecker 2 is a laser that combines performance, versatility and mobility. With its advanced technology and intuitive operation, the device opens up new possibilities in the field of object personalization. It is ideal for professionals and amateurs wishing to explore the world of laser engraving. Engraving photos and a variety of materials The LaserPecker 2 stands out for its ability to engrave photos from an album or camera, allowing users to create unique, personalized works. The device has the ability to work on a variety of materials, such as wood, metal, leather and plastic, making it an extremely versatile tool, ideal for a variety of projects. Mobility and performance Despite its small size, the LaserPecker 2 is an extremely powerful device. Its compact design makes it easy to carry and allows engraving in places that are difficult to reach with other devices. This makes it ideal for those who change their workspace frequently or work with objects of unusual form. Electric stand with adjustable focal length The electric stand is another asset of this device. It allows you to precisely adjust the focal length using the side buttons, which increases the accuracy and quality of engraving. In addition, the ability to hold the laser at the desired angle allows for optimal adjustment to the engraved surface. Compatibility and supported formats The LaserPecker 2 also stands out for its excellent compatibility with various operating systems, such as iOS, Android, macOS and Windows. Support for a wide range of file formats, including jpg, svg, png, bmp and many others, makes this device extremely versatile. Advanced laser technology The LaserPecker 2 is a device equipped with a 5000mW NICHIA laser diode with a wavelength of 450nm, which provides outstanding precision and engraving performance. Its ability to work at 1K, 1.3K and 2K resolutions enables clear and detailed effects on a wide range of materials. The device has an impressive precision of up to 0.025mm, which guarantees exceptional quality of final products. This makes the LaserPecker 2 suitable for intricate and precise projects, both at home and in professional applications. Included Laser Power cable with power adapter Electric stand LaserPecker Versatile Electric Roller Laser cover USB cable x 2 Protective goggles Ruler Wrenches and screws Brand LaserPecker Model L2 Version number 2021-7A Laser type 450nm NICHIA Diode Laser Output power of the laser source 5000mW Data transmission Bluetooth 5.0 Supported formats jpg, svg, png, bmp, G code, CAD, AI, CDR, dwr and more Compatibility iOS 9.0 and above, Android 6.0 and above, macOS 10 and above, Windows 10 and above Power input DC (12V, 5A), AC (100-240V, 50-60Hz) Power 5W Operating temperature range 0°C-65°C Operating humidity range 5%~80% Safety certification EC 60825-1, CE, ROHS, FCC, FDA, CDRH registration IEC 60825-1, NCC, KC, UKCA, TECLEC Engraving speed 800mm/s Precision 0.025mm Engraving area 2000mm Resolution 1K/1.3K/2K Distance 110nm Viewing speed 3750mm/s Weight 2.2kg Dimensions Laser unit: 162.5 x 60 x 122mm, electric stand: 194 x 153.5 x 236mm Continuous operation time 168h Lifetime 10000h