Adapter 12V 1A

Swit PD-A12K 12V-1A barošanas adapteris ar aizslēdzamu savienotāju, piemērots Swit FLOW un Curve ierīcēm, 1,5 m kabelis.

Wi-Fi router 2.4/5GHz, 3000Mbps **Features:** Wi-Fi 6th generation 802.11AX standard router is characterized by higher bandwidth and speed and lower electricity consumption. It is an ideal home network router. Supports multi-user, large coverage, low latency scenarios. MU-MIMO+OFDMA technologies significantly improve network performance and efficiency, satisfy multiplayer online games and allows you to watch high-definition videos smoothly. BSS technology enhance the ability to fight against neighbor's WiFi interference. Suitable for Mesh networking. Supports Wi-Fi wireless standards 802.11ax (Wi-Fi6), 802.11ac (Wi-Fi5), b/g/n (Wi-Fi4). Gigabit Ethernet ports 3x LAN and 1x WAN. Wireless rate reaches 3000Mbps. Package included: power supply and network cable. **Technical specifications:** Power: 12V DC, 1A power adapter. Consumption: max 12W. Chipset: MT7981BA+MT7976CN+MT7531AE. Memory: DDR 256MB; Flash: 128MB. Antenna: 4x 5dBi. LED indicators: working status, Mesh network, WAN, 5.8G, 2.4G. Buttons: WPS reset; On/off; Mesh network connection. Security: WPA3 authentication. Encryption: WPA3, WPA2, WPA2-PSK, WPA-PSK, WPA. Operating temperature: 0°C~+40°C. Operating humidity: 10-90%RH (non-condensing). Size: 160x160x168 mm. **Ethernet:** Ports: 1x WAN + 3x LAN. Data transfer rate: 10Mbps / 100Mbps / 1000Mbps. **Wi-Fi:** Wireless standards: IEEE802.11AX, IEEE802.11AC, IEEE802.11a, IEEE802.11b, IEEE802.11g, IEEE802.11n. Maximum data transfer rate: 3000Mbps. Frequency: 2.4GHz (2.412-2.472GHz); 5GHz (5.180-5.825GHz). Data transfer rate: 2.4GHz - 574Mbps; 5.8GHz - 2400Mbps. **Warranty:** 24 months.   

Wi-Fi router 2.4/5GHz, 3000Mbps **Features:** Wi-Fi 6th generation 802.11AX standard router is characterized by higher bandwidth and speed and lower electricity consumption. It is an ideal home network router. Supports multi-user, large coverage, low latency scenarios. MU-MIMO+OFDMA technologies significantly improve network performance and efficiency, satisfy multiplayer online games and allows you to watch high-definition videos smoothly. BSS technology enhance the ability to fight against neighbor's WiFi interference. Suitable for Mesh networking. Supports Wi-Fi wireless standards 802.11ax (Wi-Fi6), 802.11ac (Wi-Fi5), b/g/n (Wi-Fi4). Gigabit Ethernet ports 3x LAN and 1x WAN. Wireless rate reaches 3000Mbps. Package included: power supply and network cable. **Technical specifications:** Power: 12V DC, 1A power adapter. Consumption: max 12W. Chipset: MT7981BA+MT7976CN+MT7531AE. Memory: DDR 256MB; Flash: 128MB. Antenna: 4x 5dBi. LED indicators: working status, Mesh network, WAN, 5.8G, 2.4G. Buttons: WPS reset; On/off; Mesh network connection. Security: WPA3 authentication. Encryption: WPA3, WPA2, WPA2-PSK, WPA-PSK, WPA. Operating temperature: 0°C~+40°C. Operating humidity: 10-90%RH (non-condensing). Size: 160x160x168 mm. **Ethernet:** Ports: 1x WAN + 3x LAN. Data transfer rate: 10Mbps / 100Mbps / 1000Mbps. **Wi-Fi:** Wireless standards: IEEE802.11AX, IEEE802.11AC, IEEE802.11a, IEEE802.11b, IEEE802.11g, IEEE802.11n. Maximum data transfer rate: 3000Mbps. Frequency: 2.4GHz (2.412-2.472GHz); 5GHz (5.180-5.825GHz). Data transfer rate: 2.4GHz - 574Mbps; 5.8GHz - 2400Mbps. **Warranty:** 24 months.   

12V 1A jaudas adapters ar 4-pinu Lemo savienotāju un 1.5 metru garu kabeli, ideāls studijām un lauka pielietojumiem.

The ZGCINE Rode Wireless GO & ME Charging Case is a portable power solution with a built-in 3400mAh battery, capable of charging up to 6 Rode Wireless GO or ME devices. Featuring USB-C PD fast charging, a magnetic closure, and storage space for accessories, this compact case ensures your wireless microphones stay powered on the go. Keep your Rode Wireless GO & ME microphones powered and organized with the ZGCINE Charging Case. Designed for content creators, vloggers, and filmmakers, this multi-device charging case provides on-the-go power and secure storage for your essential audio gear. With a built-in 3400mAh battery, the case can charge up to 6 Rode Wireless GO or ME units, ensuring extended usage during shoots and live sessions. The USB-C PD 20W input/output supports fast charging, while the three additional USB-C ports (5V/500mA each) allow for simultaneous charging of multiple devices. Designed for convenience and security, the case features a magnetic opening and closing cover for easy access, and dedicated storage compartments for organizing accessories like cables, adapters, and clips. With a full charge time of approximately 5.9 hours, this charging case is a must-have for professionals and creators who rely on wireless audio solutions. Key Features: Built-in 3400mAh battery for charging on the go. Supports up to 6 Rode Wireless GO & ME devices. USB-C PD 20W fast charging for quick power replenishment. Magnetic closure design for easy access and secure storage. Compact and lightweight for portability. Dedicated accessory storage compartments for organized carrying. Fast charging-fully charges in approximately 5.9 hours. Specifications: Battery Capacity: 3400mAh USB-C PD Input/Output: 5V 2.4A, 9V 1.4A, 12V 1A (MAX) USB-C Output: 5V/500mA × 3 (MAX) Charging Capacity: Up to 6 Rode Wireless GO & ME devices Full Charge Time: ~5.9 hours

Apraksts: Ražotājs: STARTING DEVICE/POWER BANK 12000MAH WITH LCD DISPLAY YT-83082 Marka Yato Simbols YT-83082 Sērija GRE Pielietojums automašīnu, motociklu, kvadriciklu, laivu ar piekaramo motoru, dārza tehnikas avārijas iedarbināšanai, portatīvo ierīču barošanai Darba temperatūras diapazons 0~35 ˚C Uzglabāšanas temperatūra 0~50 ˚C Svars 0.4kg Spriegums 12V d.c. Displeja tips LCD Akumulatora ietilpība 12 Ah Luktura funkcija JĀ Akumulatora spriegums 3.7 V d.c. Akumulatora tips Li-Ion Uzlādes laiks 4 stundas Lādētājs tīkla 110-240V ~ 50/60Hz, automašīnas 12V Apgaismojuma režīmi 100%, SOS Akumulatora enerģija 44.4 Wh Palaišanas strāva 300 A Maksimālā palaišanas strāva 500 A Palaišanas laiks 2 pp Intervāls (pārtraukuma laiks) 30 pp USB porta izejas spriegums 5V d.c. Maks. USB porta izejas strāva 2.4A Ieejas spriegums 15 V d.c. Ieejas strāva 1A DC ligzdas izejas spriegums 19 / 12 V d.c. Maks. DC ligzdas izejas strāva 3.5/-A Palaišanas ierīce/power bank 12000mAh ar LCD displeju Daudzfunkcionālā palaišanas ierīce ir pārnēsājama akumulatora ierīce, kas ļauj veikt avārijas iedarbināšanu transportlīdzeklim, kas aprīkots ar 12 V elektrisko sistēmu. Pateicoties papildu ligzdām, tā ļauj arī uzlādēt citas ierīces, kuras parasti var uzlādēt, izmantojot USB portu. Papildu informācija: viegls, bezvadu enerģijas avots šķidro kristālu displejs ļauj iedarbināt automašīnu, motociklu, kvadriciklu, laivu ar piekaramo dzinēju, dārza tehniku benzīna un dīzeļdzinējiem Turklāt tie uzlādēs jūsu planšetdatoru, tālruni, navigāciju un daudzas citas ierīces iebūvēts lukturis ar iespēju iestatīt SOS režīmu ietilpība: 12 000 mAh ieeja no lādētāja: 15V/1A izejas: 2x USB 5V/2.4A 12V izeja izeja 19V/3.5A strāva 300A/500A Piederumi: kabeļi automašīnas iedarbināšanai ar viedo aizsardzību uzlādes kabelis no piepīpētāja ligzdas lādētājs USB uzlādes kabeļi kabelis ar 8 adapteriem futrālis

Šis piepūšamais sniegavīrs ir ideāls papildinājums jūsu svētku dekoram, piešķirot jebkurai videi nedaudz rotaļīguma un prieka. Tas ir iespaidīgs 160 x 110 x 240 cm liels, padarot to par izcilu elementu jūsu dārzā vai viesistabā. Ar iebūvētu apgaismojumu un ātras piepūšanas funkcijām, šis sniegavīrs ir gan funkcionāls, gan patīkams. Izturīgs taftas materiāls: Izgatavots no 210T taftas ar PU pārklājumu, šis piepūšamais sniegavīrs ir paredzēts, lai izturētu laikapstākļus, nodrošinot, ka tas paliek svētku elements visā sezonā. Materiāls nodrošina gludu, spīdīgu apdari, kas uzlabo tā vizuālo pievilcību. Iebūvēts LED apgaismojums: Sniegavīrs ir aprīkots ar dekoratīvām virtenēm, kurās ir trīs LED spuldzes, kas izgaismo figūru, radot siltu un aicinošu gaismu. Šī funkcija nodrošina, ka jūsu sniegavīrs ir redzams un burvīgs, pat vājā apgaismojumā. Ātra un viegla uzstādīšana: Ar iebūvētu ventilatoru un 12V 1A adapteri sniegavīrs ātri piepūšas, ļaujot to uzstādīt minūšu laikā. Ātrā izpūšanas funkcija nodrošina vieglu uzglabāšanu, kad svētku sezona ir beigusies. Droša uzstādīšana: Iepakojumā ir seši 19 cm zemes mietiņi un divas 2 m auklas, nodrošinot, ka sniegavīrs paliek stabils un drošs, pat vējainos apstākļos. Tas padara to par uzticamu izvēli āra izstādēm. Vienkārša apkope: Lai sniegavīrs izskatītos vislabāk, vienkārši noslaukiet to ar mitru drānu. Izvairieties no tā atstāšanas ārā ļoti augstā temperatūrā, lai saglabātu tā izskatu un funkcionalitāti.

UNI FAN SL Wireless The UNI FAN SL Wireless series has made another revolutionary breakthrough in making cable management easier and unifying controllers across different devices. The UNI FAN SL Wireless utilizes a 2.4 GHz wireless signal to control its lighting effects and fan speed to further improve your PC building experience. Note: This listing is for the LED model, not the LCD Model. Images shown below are for references only. WIRELESS CONTROL, EASY INSTALLATION The revolutionary 2.4GHz L-wireless controller greatly simplifies the installation experience of UNI FAN SL Wireless Series. L-WIRELESS CONTROLLER Included in these models:12SLLCD1W3B, 12SLLCD1W3W, 12RSLLCD1W3B, 12RSLLCD1W3W, 12SL1W3B, 12SL1W3W, 12RSL1W3B, 12RSL1W3W, PW24-1W-T, RF-T-B, RF-T-W Based on user experience and continuous research, we newly designed a L-Wireless controller. The L-Wireless controller connects to the motherboard, and transmits a 2.4GHz signal to the fan, enabling the wireless control of the LED lighting effects and fan speed for the UNI FAN SL Wireless Series. Note: This listing is for the LED model, not the LCD Model. Images shown below are for references only. Connect to USB Type A port   Connect to 9-pin port on motherboard Note: To synchronize the fan speed with the motherboard, please use the second connection method and ensure that the PWM cable from the controller is connected to the motherboard for proper functionality. Switch to PWM fan and full speed mode in the Bios. Power each group of fans by connecting the PWM cable on the receiver to the motherboard (the LCD version also requires a separate USB connection for signal transmission). The cable length can be shorten by winding it around the organizer on the receiver. Note: The LED and LCD version use a different receiver, for the mix cluster, please use the LCD version receiver. Note: If the motherboard 4-pin PWM ports' power is insufficient (below 1A) and the fan shows a flickering white light upon startup, this indicates unstable power from the motherboard. In this case, please connect the cable to a different 4-pin PWM port on the motherboard or use the included 12V to SATA adapter from the triple-pack. Adopting a wireless solution minimizes the number of cables, and simplifies cable management while avoiding occupying the few available USB 2.0 ports on the motherboard. This allows users to connect more devices without restriction. Note: This listing is for the LED model, not the LCD Model. Images shown below are for references only.   The transmission logic between the USB port and the LCD has been optimized, enabling the use of an additional USB splitter cable to the USB 2.0 or 3.0 port on the motherboard: - USB splitter cable without SATA for additional power (e.g., LIAN LI USB 2.0 1-to-3 HUB): Supports up to 6 SL LCD wireless fans.- USB splitter cable with SATA for additional power (e.g., LIAN LI Edge PSU hub): Supports up to 9 SL LCD wireless fans. Furthermore, a single motherboard can support up to 20 UNI FAN SL LCD wireless fans. Note: This listing is for the LED model, not the LCD Model. Images shown below are for references only. SIMULTANEOUS CONTROL This powerful controller supports the transmission of 10 channels simultaneously. Note: The controller supports the Strimer Wireless Series as well. Note: This listing is for the LED model, not the LCD Model. Images shown below are for references only.   Each group of fans occupies one channel, ensuring stable control for multiple groups of fans, all within the installation limits of your standard PC. Plus, it's fully compatible with the latest Strimer Wireless, allowing you to use the extra channels for other devices. In the future, the L-Wireless Controller will also be compatible with all LIAN LI wireless devices. With this controller, you can create a stunning and streamlined LIAN LI ecosystem that combines beauty and simplicity! Note: This listing is for the LED model, not the LCD Model. Images shown below are for