Adapter Ac Dc

Antennae: internal Network interface: 802.11b / g / n WLAN with 1x1 MIMO Network Security: WEP (40-bit, 128-bit) / WPA (TKIP, AES) / WPA2 (TKIP, AES) RF / Wireless: ISM band 2.4 GHz Image sensor: M2010, 1600x1200 Lens focal length: 3.6 mm; F/No: 2.2 Viewing angle: horizontal: 73, vertical: 39, diagonal: 83 IR operation mode: always off, always on or AUTO Infrared (IR) Night Vision: Four 14-inch IR LEDs, 850nm, 8-meter illumination distance IR cut-off filter: dual mode day/night switching Auto IR Mode (Enabled): Enabled when the ambient light is 3 + 2 LUX or less Auto IR Mode (Disabled): Disables when ambient light is 6 + 3 LUX or higher Ambient Light Sensor: RoHS Compliant for 560nm luminance detector Video codecs: H.264 Resolution: 1280x720, 640x360, 320x180 Frame Rate: up to 30 frames per second Video capture: 720p Still Capture Audio codecs: G.711, AAC Audio input: built-in microphone, -38dB + 2dB Audio output: built-in speaker, 1W / 8ohm speaker Buttons: Factory reset Switches: Quick Setup Mode Power supply: external AC power adapter INPUT: 100-240V AC, 50 / 60Hz, output: 5V DC, 1.0A Operating Environment: Temperature: 32F - 104F (0C - 40C), Humidity: 20-80% RH Non-condensing

Apraksts: Ražotājs: - reflektors ar 7 COB LED vienībām - mikro USB uzlādes ligzda - uzlādes indikatora LED - akumulators: uzlādējams litija 3.7V / 2200mAh - LED veids: 0.5W balts (5700K) - spilgtums: 250 luksi 0.5m attālumā (222 lūmeni) - nominālais LED mūžs: 80 000 stundas - uzlādes laiks: aptuveni 3 stundas - darba laiks: aptuveni 5,5 stundas - garums: 360 mm - komplektācijā - COB LED rokas lampa - uzlādes adapteris AC 230V / DC 5V(1A) - USB uz mikro USB uzlādes kabelis, 1 m - magnētiskais turētājs

Caruba Canon LP-E17 (DR-E18) fiktīvā baterija + AC-E6 barošanas adapteris ir paredzēti, lai nodrošinātu enerģiju kamerām, kurās kā barošanas avots tiek izmantots Canon LP-E17. Barošanas avotā ir LP-E17 fiktīva baterija ar 2,1 mm līdzstrāvas mucas savienotāju un AC-E6 adapterisKabeļa raksturojums LP-E17 fiktīvajai baterijai otrā galā ir 2,1 mm līdzstrāvas mucas savienotājs, ko var savienot ar 2,1 mm līdzstrāvas mucas savienotāja sievišķo savienotāju maiņstrāvas adapterī 110-240 AC. Visu kabeļu kopējais garums ir 401 cm.

Starlet Finishing Clipper ir paredzēts precīzai trimmēšanai delikātās un grūti aizsniedzamās vietās, kā arī tādās detaļās kā ķepas, purns, ausis un aste. Ar savu vieglo un ergonomisko dizainu šis klipers ērti ieguļas rokā. Tas var darboties gan ar vadu, gan bezvadu režīmā. Iebūvētā litija jonu baterija nodrošina līdz pat 90 minūtēm lietošanas ar pilnu uzlādi. LED indikators parāda 3 dažādus ātrumus un baterijas līmeni. Šajā modelī izmantotais asmens griež 0,5 mm garumā un tam ir ļoti smalki un cieši izvietoti zobi, nodrošinot drošu lietošanu un garantējot īpaši gludu apdari. Show Tech Starlet Trimmer tehniskās specifikācijas: Adapters: AC ieeja 100-240V 50/60Hz, DC izeja 3.5V 1000mAh Baterija: 3.2V 600mAh Baterijas tips: Litija LiFePo4 Darbības režīms: Ar vadu/Bezvadu Asmens: Nerūsējošais tērauds Griešanas garums: 0,5mm Asmens platums: 3,2cm

Yongnuo FJ-SW202719006000D is efficient power supply with a compact construction, designed for devices requiring a DC voltage 19 V and the intensity of 6 A. Powers Yongnuo lamp from the mains voltage of 100-240 V. The three-pin power plug is provided with a lock which prevents the accidental unplugging of the lamp socket.

Portable mini 3-in-1 oscilloscope FNIRSI DSO-TC4FNIRSI DSO-TC4 is a device that combines three functions: digital oscilloscope, electronic component tester and signal generator. By combining waveform analysis with component recognition and signal test functions, it will prove useful in service applications. In addition, the intelligent Anti-Burn function protects the input circuit from damage when measuring probes are connected incorrectly. This makes the equipment safe to use even for less advanced users.Measurement functions and signal analysisThe device offers a measurement bandwidth of up to 10 MHz and a sampling rate of 48 MSa/s. It can display waveforms with high detail and accuracy, allowing real-time analysis of voltage signals. With 13 predefined waveforms and frequencies in the range of 0-50 kHz (amplitude 0.1-3.0V), the signal generator allows simulation of various circuit operating conditions.Extensive component testing capabilitiesThe integrated component tester automatically recognizes diodes, transistors (including MOSFETs), resistors, capacitors and other passive and active components. With test sockets and intelligent component detection, quick diagnostics and parameter identification are possible.Convenient operationA 2.8-inch TFT color screen provides easy-to-read data and graphs. The user interface supports eight languages, making it easy to configure the device. The control panel is designed for quick access to key functions, such as auto mode, pause, and mode change.Connectivity and power supplyThe oscilloscope features a USB-C port for charging and data transfer. The ability to export waveforms to a computer facilitates further analysis and archiving of results. A built-in 1,500 mAh lithium-ion battery ensures long operation of the device, and an automatic sleep mode extends the operating time between charges.Included oscilloscope P1600 probe crocodile clamp 3x test hooks user manual USB-C charging cable adapter Oscilloscope Manufacturer Fnirsi Model DSO-TC4 Display TFT color screen 2.8 inches Backlighting Adjustable brightness Power supply USB Type-C (5V/1A) Battery Lithium-ion 3.7V, 1500mAh Languages 8 languages (including Chinese, English, German, Portuguese, Japanese, Spanish, Korean, Russian) Dimensions approx. 90×142×27.5mm Weight 186 g Real-time sampling rate 48MSa/s Analog bandwidth 10 MHz Input impedance 1MΩ Coupling mode AC/DC Test voltage range Probe 1:1 - 80Vpp (±40V); Probe 10:1 - 800Vpp (±400V) Vertical sensitivity 10mV/div-10V/div (X1 range) Vertical offset Adjustable with indication Time base range 50ns-20s Trigger modes Auto / Normal / Single Trigger type Rising edge, Falling edge Trigger level Adjustable with indication Freeze waveform Yes (HOLD function) Automatic measurement Max, Min, average, RMS, Vpp, frequency, period, fill factor (duty cycle) values Transistors Diode Range: Voltage drop

Andis bezvadu mašīnīšu barošanas bloks. Paredzēts uzlādes stacijām. Specifikācijas: izejas uzlādes strāva: 15V / 1200mA ieejas sprieguma diapazons: 100-240V / 0.6A kabeļa garums: 2.3m Saderīgs ar šādām mašīnītēm: Andis DBLC Pulse ZR I / II Andis Supra ZR II Barošanas bloks tiek pārdots bez strāvas adaptera.

ZHIYUN MAIŅSTRĀVAS/LĪDZSTRĀVAS ADAPTERIS MOLUS G60