Adapter Power Supply

Cycplus T3 bicycle trainerCycplus T3 is an advanced direct-drive trainer designed for demanding cycling training at home. It offers maximum power of up to 2,800 watts, torque of 110 N-m and simulation of uphill climbs of up to 27% for a realistic riding experience. Power measurement accuracy of ±1% allows for reliable effort analysis and informed form building.Intelligent engine control and realistic riding characteristicsThe intelligent engine control program used reacts to changes in speed and incline in real time, simulating natural driving conditions on the road. Such a solution makes the trainer suitable for both calm exercises and intense sprints or intervals.Measurement of power and left/right balanceThe Cycplus T3 features a new left/right balance measurement system, which provides accurate data on cadence and power distribution. This information helps analyze pedaling technique and form correct cycling habits. The trainer does not require calibration, which simplifies operation and allows you to focus solely on training.Powered mode and autonomous modeThe device can work both plug-in and wirelessly. In plug-in mode, the motor eliminates resistance to simulate descents, providing a more realistic downhill experience. And in unplugged mode, the trainer operates fully autonomously, allowing you to train anywhere.Effective heat dissipationThe design uses a copper plate in the stator and a built-in dual fan system, which are responsible for efficient and stable heat dissipation. Such a solution allows for prolonged training sessions, including demanding simulations of long climbs, without risking a drop in the device's performance.Connectivity and compatibility with training applicationsCycplus T3 supports Bluetooth 5.0, ANT+, ANT+FE-C, as well as FTMS protocols, which ensures broad compatibility with popular workout apps, such as Zwift, Onelap, TrainerRoad and PerfPRO, for example. Wireless communication enables seamless data transfer, enhancing the realism and efficiency of training.Impressive performanceThe Cycplus T3 trainer offers impressive maximum power of up to 2,800 watts, torque of 110 Nm and realistic simulation of uphill climbs with gradients of up to 27%. Such parameters make the device meet the expectations of not only amateur daily trainers, but also advanced riders preparing for competitions.Included Cycplus T3 trainer x1 Cassette (pre-installed) x1 Right through-axle adapter (pre-installed) x1 Adapter for through-axle left (pre-installed) x1 Quick release adapter right x1 Quick release adapter left x1 17 mm wrench x1 Allen wrench x1 8-10 speed cassette spacer x1 Cassette adjustment spacer x5 Disc brake spacer x1 Brake disc spacer x1 Quick release clamp x1 AC adapter x1 AC power cable x1 Soundproofing mat x1 USB ANT+ receiver with extension cable x1 Manufacturer Cycplus Model T3 Type Intelligent direct drive trainer Magnets 50x neodymium magnet + 45 sets of electromagnetic coils Dimensions when unfolded 520 × 699 × 547 mm Dimensions after folding 300 × 257 × 547 mm Design Folding, X-shaped Weight with cassette 19.4 kg Power supply 48 V 1.25 A Standalone mode (unplugged) Supported Maximum power 2800 W Power at 40 km/h 2400 W Accuracy of power measurement ±1% Left/right balance Yes Calibration Does not require Maximum simulation slope 27% Downhill simulation In plug-in mode only Maximum torque 110 N-m Maximum braking force 323 N Wireless connectivity Bluetooth 5.0, ANT+ Supported protocols ANT+FE-C, FTMS Frame compatibility 5×130/5×135 (quick release), 12×142/12×148 (through axle) Cassette compatibility Shimano 8-12, SRAM 8-11, SRAM 12 (XDR drum required)

LaserPecker LP2 Plus Laser EngraverLaserPecker LP2 Plus is a compact laser engraver designed for precise engraving and cutting in many materials. The device combines high speed, good accuracy, and simple operation, making it suitable for both small workshops and mobile work. With 10 W of power, up to 4K resolution, and support for over 150 materials, it allows you to create personalized projects, product markings, or decorative elements. The design is engineered to facilitate quick project setup and a smooth transition from concept to finished engraving.High speed and efficiencyThe LaserPecker LP2 Plus achieves a maximum engraving speed of up to 4000 mm/s, which significantly reduces project completion time. In practice, this means that many elements can be produced in a shorter time, which is particularly important for serial work or when fulfilling orders for personalized products. The algorithms used automatically adjust the operating parameters to the type of project, so the user does not have to manually adjust the settings each time the graphics change.Powerful 10 W laser and precise engravingThe device uses a 10 W diode laser with a wavelength of 450 nm. This makes it possible to perform deeper engravings and cut materials such as plywood or black acrylic. Under favorable conditions, the engraver can cut through up to 6 mm of plywood in a single pass. The precise laser spot size of 0.06 × 0.08 mm allows you to maintain clear details even in small patterns or inscriptions.Support for multiple materialsLaserPecker LP2 Plus supports over 150 different materials. This allows you to engrave on wood, bamboo, leather, felt, acrylic, coated metals, and more. The device can also handle materials such as stainless steel, tinted glass, and paper, allowing you to create a wide range of products, from decorations and gifts to markings and advertising elements.Mobile design and convenient operationThe device has been designed with mobility in mind. The entire set weighs approximately 3.39 kg, making it easy to move the engraver between workstations or take it with you to work on a project elsewhere. The foldable design and compact dimensions make it easy to store the equipment and set up a workstation even in a small space.Simple operation and wide compatibilityThe LaserPecker LP2 Plus works with LaserPecker Design Space and LightBurn software, which allow you to design and manage the engraving process. The device can be connected via Wi-Fi or USB and operated from a smartphone, tablet, or computer. Support for popular graphic file formats allows you to quickly import projects and start working without complicated configuration.Included LaserPecker LP2 Plus laser engraver AC power adapter with power cord Base plate Electric tripod Protective cover Safety glasses 4 L-shaped positioners USB-A to USB-C cable (0.6 m) USB-A to USB-C cable (1.5 m) 2 security keys H3 Allen key H2.5 and H1.5 Allen keys User manual Test material kit Manufacturer LaserPecker Model LP2 Plus Laser type 450 nm diode Laser power 10 W Maximum engraving speed 4000 mm/s Maximum preview speed 10000 mm/s Resolution 1K / 2K / 4K Laser spot size 0.06 × 0.08 mm Working area 100 × 100 mm Supported materials including wood, bamboo, leather, felt, acrylic, coated metal, stainless steel, tinted glass, paper Supported files JPG, SVG, PNG, BMP, G-code, DXF Connectivity Wi-Fi, USB Supported systems Android 7.0+, iOS 13+, Windows 10+, macOS 10.15+ Power supply DC 24 V / 5 A, AC 100–240 V 50–60 Hz Device weight approx. 3.39 kg Laser module dimensions 185 × 74 × 146 mm Safety certificates CE, ROHS, FCC, FDA, NCC, KC, UKCA, TELEC, SRRC