Adapter Power Supply

Shelly Plus Add-on Sensor AdapterThe Shelly Plus Add-on is an invaluable sensor interface that opens up entirely new possibilities in the world of home automation. This galvanically isolated interface is specially created for Shelly Plus devices to provide you with full control and flexibility in managing your smart home.Compatibility and Compact SizeThe Shelly Plus Add-on is perfectly compatible with many Shelly Plus devices, such as Shelly Plus 1 / 1PM, Shelly Plus 2PM, Shelly Plus i4 / i4DC. It allows you to further expand your installation and control various devices in your home. Moreover, it impresses with its compact design, measuring only 37 × 42 × 15 mm. This means you can easily install it anywhere, even in places where space is limited. Manufacturer Shelly Model Plus Add-on Dimensions 37 × 42 × 15 mm Weight 105 g Operating Temperature -20°C to 40°C Humidity 30% to 70% Max. Altitude 2000 m DC Supply Voltage 3.3 V Power Consumption < 0.5 W VCC max. 10 mA VREF OUT max. 1 mA VREF+R1 OUT 10 kΩ Compatibility Shelly Plus 1 / 1PM, Shelly Plus 2PM, Shelly Plus i4 / i4DC , Dodatkowy adapter czujnika Shelly Plus Add-onShelly Plus Add-on to nieoceniony interfejs czujnika, który otwiera przed Tobą zupełnie nowe możliwości w świecie automatyzacji domowej. Ten izolowany galwanicznie interfejs został stworzony specjalnie z myślą o urządzeniach Shelly Plus, aby dostarczyć Ci pełną kontrolę i elastyczność w zarządzaniu swoim inteligentnym domem.Kompatybilność i niewielkie rozmiaryDodatek Shelly Plus Add-on jest doskonale kompatybilny z wieloma urządzeniami Shelly Plus, takimi jak Shelly Plus 1 / 1PM, Shelly Plus 2PM, Shelly Plus i4 / i4DC. Dzięki niemu możesz jeszcze bardziej rozbudować swoją instalację i kontrolować różnorodne urządzenia w swoim domu. Co więcej, zachwyca swoją kompaktową konstrukcją o wymiarach 37 × 42 × 15 mm. To oznacza, że możesz łatwo zamontować go w dowolnym miejscu, nawet tam, gdzie przestrzeń jest ograniczona. Producent Shelly Model Plus Add-on Wymiary 37 × 42 × 15 mm Waga 105 g Temperatura pracy -20°C do 40°C Wilgotność 30% do 70% Max. wysokość 2000 m Napięcie zasilania DC 3,3 V Pobór energii < 0,5 W VCC max. 10 mA VREF OUT max. 1 mA VREF+R1 OUT 10 kΩ Kompatybilność Shelly Plus 1 / 1PM, Shelly Plus 2PM, Shelly Plus i4 / i4DC

UNI-T UT681C network cable testerUNI-T UT681C cable tester is a handy and reliable tool for checking the condition of Ethernet, telephone and BNC cables. Indispensable in the work of installers, technicians and service technicians, it allows you to instantly detect breaks, short circuits, misconnections or cable crossings. Thanks to its compact design, clear LED indicators and 9V battery power, the UT681C is suitable for both quick tests in the field and thorough network inspections in the office or server room.Multifunctionality that saves timeThe UT681C supports cables terminated with RJ45, RJ11 and BNC connectors (via the RJ45-BNC adapter included in the kit). It allows quick signal continuity checks and diagnosis of short circuits, open circuits and misconnections - including crossed pairs. The built-in LED array (LED1~LED8 and LED_G) allows you to easily assess the condition of individual conductors in the cable, in both fast and slow test modes.Simple operation, maximum mobilityThe device is operated with a single button, eliminating the need for complicated configuration. An automatic shut-off function after 10 minutes of inactivity saves the battery, and a low charge indicator warns when the power supply needs to be replaced. The tester is lightweight, handy and ready to use as soon as the battery is inserted.Robust design for years of useThe UT681C is designed to operate in a wide range of temperatures and humidity, allowing it to be used both in the office and outdoors. CE and UKCA certifications attest to its high build quality and safe use.Included UNI-T UT681C cable tester (transmitter and receiver) 9V battery RJ45-BNC adapter User's manual Manufacturer UNI-T Manufacturer code UT681C Supported connectors RJ45, RJ11, BNC (with RJ45-BNC adapter) Test functions Detection of short circuits, breaks, crossings and incorrect connections Test modes fast, slow Result display LEDs (LED1~LED8, LED_G) Ethernet cable shielding test Yes Power supply 9V battery Automatic shutdown function After 10 minutes of inactivity Low battery indicator Below 7.2V One button operation Yes Operating temperature 0~40°C Storage temperature -10~50°C Operating humidity 20~80% RH Storage Humidity 10~90% RH Maximum operating altitude ≤2000 m Safety standards CE EN61326-1:2013, EN61326-2-2:2013 Net weight transmitter - 87 g, receiver - 51 g Dimensions Transmitter - 102 × 62 × 28 mm; receiver - 102 × 37 × 28 mm Color red-gray

SkyRC Type35 2–4S Lithium Battery ChargerThe SkyRC Type35 2–4S is a modern charger designed for lithium battery users who expect fast, safe, and convenient charging in all conditions. The device supports LiPo, LiHV, and LiFe batteries in 2–4S configurations, offers a maximum charging power of up to 35 W and a current of up to 2 A, and thanks to its USB-C Power Delivery (9–20 V) power supply, it can work virtually anywhere—at home, on the track, in the workshop, or in the field with a power bank. The compact design, measuring only 84 × 48 × 22 mm and weighing approximately 53 g, means that the charger fits easily in your hand or pocket, while intelligent temperature control and precise cell balancing ensure safe and efficient charging.USB-C PD power supply – charging wherever you areWith USB-C Power Delivery (PD 3.0) support, the SkyRC Type35 charger gives you tremendous freedom to use power. Simply connect it to a power adapter, power bank, or compatible PD source to immediately start charging 2-4S packs. This solution makes the device ideal for use both on your workshop desk and outdoors during trips or model training sessions. It's a convenient way to charge your batteries virtually anywhere.Charging via the balancer port – greater precision and safetyThe Type35 charges batteries directly via the balancing port, eliminating the need for additional cables or adapters. Each cell is monitored and controlled individually, keeping the voltage perfectly balanced throughout the pack. The result is higher charging efficiency, more stable battery performance, and longer battery life that you can rely on every time you use it.One charger for multiple battery technologiesThe SkyRC Type35 is designed to support the most popular lithium battery technologies. You can easily charge LiPo, LiHV, and LiFe packs in configurations from 2S to 4S, giving you great flexibility for a variety of applications. LiPo batteries offer high energy density and low weight, LiHV batteries offer higher voltage and greater capacity for demanding applications, while LiFe batteries are distinguished by their exceptional durability and safety. One device allows you to handle all of these solutions.Fast charging up to 35 WThe charger offers a maximum power of 35 W and a charging current of up to 2 A, so that packs can be ready for use in a short time. The intelligent temperature management system ensures stable operation and prevents overheating, maintaining safe conditions even during intensive charging. In practice, this means that the battery can be ready for use before you finish your coffee break.Small size, huge possibilitiesThe Type35 is a device designed with mobility in mind. Its compact design is about four times smaller than a typical smartphone, and weighing only about 53 g, the charger adds virtually no weight to your gear. It fits easily in your pocket, model bag, or backpack, so you can always have it with you—in the workshop, on the racetrack, or in the field.Colorful LED—instant status informationThe charger is extremely easy to use thanks to a three-color LED that clearly indicates the current operating status. A quick glance is all it takes to see if the charging process is in progress, has been completed, or if the device is waiting for a battery to be connected. It's a quick and intuitive way to check without having to analyze complicated messages.Safe operation in all conditionsThe SkyRC Type35 is designed for stable operation in a wide range of environmental conditions. The device operates at temperatures from 0°C to 40°C, and its design allows for safe storage even in the range from -10°C to 70°C. This makes the charger suitable for both workshop and field use, offering reliable performance whenever you need power for your batteries.Included: Charger User manual General specifications Manufacturer SkyRC Model Type35 Product type Lithium battery charger Supported battery types LiPo, LiHV, LiFe Supported number of cells 2–4S Charging method C