Adapter Power Supply

SmallRig 4-Arm Suction Cup Camera Mount Kit SC-15K 3565 represents a professional and reliable solution to vehicle-based or other personalized photography. With powerful suction force, the mount has maximum horizontal suction of 120 kg and maximum vertical suction of 30 kg. The suction cup camera mount, with great air-tightness and wear resistance, can work at -20° C to 60° C,  suitable for clean, dry, smooth, and even curved surfaces. The kit consists of 4 suction cups, 4 x 11" magic arms, 1 lens support, 1 half ball head, and 2 cable tethers. Among them, the suction cup quickly attaches the magic arm via a NATO clamp to prevent twisting; the half ball head, which is -8°/+8° adjustable, supports Arca-Swiss and DJI RS stabilizer quick release plate for quick switch between cars, handheld, and stabilizer shooting; and the cable tether ensures your gear is safe. The kit also comes with an integrated storage case, which is resistant to dust, abrasion, and rain in complex outdoor environments. 1. Load capacity of 120 kg.2. Quick release  via a NATO clamp.3. A comprehensive solution to the power supply and image  transmission.4. The Half-ball head locks the mount while  allowing for fine adjustment of shooting angles.5. Supports  Arca-Swiss and DJI RS stabilizer quick-release plate for quick switch between  car, handheld, and stabilizer shooting. Disclaimer: Please mount it onto recommended surfaces and check at least every four hours.  Note:1. Suitable for clean and glossy surfaces, not for rough, uneven, dirty, or fragile surfaces.2. Please always keep the sucker and filter cotton intact and clean.3. Please apply it carefully to coated surfaces.4. When the safety-line indicator shows, it means vacuum loss. Pump the plunger until 100% vacuum pressure.5. It better work with a camera cage. Warnings:1. The 4-Arm Suction Cup Camera Mount Kit, when adhering to a still object, has a tested maximum horizontal suction of 120 kg and maximum vertical suction of 30 kg. Please check the suction force every 24 hours.2. It is recommended, when adhering to a vehicle, the 4-Arm Suction Cup Camera Mount Kit works with a cable tether and bears no more than 15kg. Please run the vehicle smoothly at a speed of below 80km/h and check the suction force every 2 hours.3. Suitable  for dry, flat, glossy, solid surfaces, not for painted surfaces, natural marble, old tiles, breathable wallpaper, diatom mud walls, unpainted wood,  frosted glass, and other rough or breathable materials.  4. Works at -20°C to 60°C.5. When the safety-line indicator shows, it means vacuum loss. Pump the plunger until 100% vacuum pressure.6. Please follow the instructions.  Products that are damaged due  to improper use are not eligible for after-sales service. 4 x 4″ Vacuum Suction Cup3 x Magic Arm1 x Half Ball Head1 x Magic Arm with Lens Support1 x Battery Adapter Plate2 x Cable Tether1 x Velcro1 x Storage Case Product Dimensions: 424.8 x 300.0 x 58.8mmPackage Dimensions: 363 x 271 x 142mmProduct Weight: 3433g±5gPackage Weight: 4328g±5gMaterial(s): Aluminum Alloy, NBR, ABS, Stainless Steel

Wireless video transmission system set Transmits up to 1080p 60 video 120 m transmission distance & 0.1 s latency HDMI, SDI, SMA & USB-C ports Power supply: battery, USB charger, or a DC adapter

SmallRig RC 350D, SmallRig’s new generation of powerful COB LED video light, employs the “Dharma Shark” optical system with a 55-degree hyper reflector to realize 149,000Lux (@ 1m) and rivals 1.2K HMI Fresnel when working with φ200mm Fresnel at the beam angle tested at 5m distance. It features CRI 96+ and TLCI 97+ for accurate color rendering and reproduction, outperforming predecessors, a GaN (Gallium Nitride) adapter that allows for power efficiency of at least 95%, as well as a damping head support system to protect the light. This item, made of metal and V-0 non-inflammable material, is 20% lighter and can be controlled by the switch, SmallGoGo App, or control panel (optional). The Bowens mount supports most light-control accessories to create varied lighting effects. Besides, a carrying bag is included for easier storage and transport. 1x RC 350D COB LED Video Light 1x Adapter 1x Power Cable 1x User Manual (in eight languages) 1x 55-Degree Hyper Reflector 1x Protection Cover 1x Carrying Bag Color Temperature: 5600K(±200K) Product Weight: 3300g Product Dimensions: 290 x 145 x 145 mm Operating Current: 8.4A (@DC 48V) Operating Voltage: DC 48V Adapter Operating Voltage: AC 100~240 V 50/60Hz Radio Frequency: 2.4GHz Power (Max): 403.2W CRI: 96+ TLCI: 97+ APP Control Type: Wireless Wireless Control Range: ≤100m Power Supply: Adapter, AC Adapter, Battery

Key Features     8 x 3G-SDI Inputs / 8 x 3G-SDI Outputs     YUV Color Space     Level A & B Signals Supported     DVB-ASI Interface Compatible     PC Software Control     Front-Panel Button Controls     RJ45, RS-232 & USB for Remote Control     SDI Input Auto Detection & Equalization     Redundant Power Design   The 1 RU 8 x 8 3G-SDI Matrix Switcher from AVMATRIX accepts eight channels of input and can drive them to eight separate output feeds. It includes a multi-format technology that detects multiple video format sources of SD/HD/3G-SDI (level A&B) and DVB-ASI signals at the same time and routes the multiple video destinations in 1080, 720, SD, NTSC, and PAL. It is controlled by manual switches on the front of the device and via RJ45 and RS-232 ports for software control as well as a USB Type-A port for keyboard control. Two 12 VDC power adapters are included to provide redundant power. Multi-format technology can auto-detect multiple video format sources of SD/HD/3G-SDI (level A & B) and DVB-ASI signals at the same time and route the multiple video destinations in NTSC and PAL SD, 720p, 1080 at any frame rate. Full control from the front panel The current channel status can be viewed visually from the 2.2" LCD screen Lock button PC control software allows you to connect a computer via Ethernet or via the RS-232 serial port USB keyboard Redundant power supply Compact design

The VL-4X is a slim, lightweight, affordable 4-channel charger. Dual Simultaneous/Sequential feature charges up to 4 batteries total with any 2 simultaneously. The included AC adapter doubles as a 90W DC power supply.

Optical SDI signal converter. Price per pair, including 12G SFP/LC adapter. Transmission distance is up to 10km, supports SDI in SD, HD, 3G, 6G and 12G formats. The converter is powered via USB and the converter has 2x 12G SDI outputs on the receiver. 12G/6G/3G-SDI input and output loop on transmitter Two 12G-SDI outputs on the receiver Supports up to 12G bandwidth Automatic SDI input switching SD, HD, 3G, 6G, 12G-SDI 10 km transmission distance Includes SFP/ LC Fiber transmitter and receiver SDI equalization and overclocking USB power supply

A new generation of video converters from Blackmagic Design! Teranex Mini models feature 12G-SDI interface, Teranex circuitry, integrated power supply, optional front panel LCD display and support for all SD, HD and Ultra HD formats up to 2160p60 or 4320p60 resolution for 8K models. Teranex Mini models use a revolutionary new chassis designed to better dissipate the heat generated by the powerful 12G-SDI interface circuits. The new Teranex Mini products also address other issues of previous generations of converters: they feature an internal power supply, standard XLR connectors and ergonomic controls. Their attractive design also makes them suitable for desktop operation in post-production studios, and they can also be operated in instrument cabinets. Their small size makes them easy to use even on filming locations, just like previous generations of converters Teranex Mini converters can handle 12G-SDI signals without overheating, even when multiple converters are installed side by side in a rack-mount adapter. The 12G-SDI interface allows to handle any SD, HD and Ultra HD formats up to 2160p60 resolution over a single standard cable with BNC connectors. The 12G-SDI technology ensures compatibility with legacy SD and HD technology, with standards switching occurring automatically One of the most innovative features of the new Teranex Mini is the optional front panel with rotary control, color LCD display and control buttons. The base panel of Teranex Mini models can be easily removed and replaced with the Teranex Mini Smart Panel with ergonomic controls. The panel provides video and audio monitoring, or displays time code or video signal standards. The Teranex Mini Smart Panel greatly enhances the user experience and allows for instant feedback when setting conversion parameters, which is especially important in a TV studio environment The Teranex Mini series also brings integrated power supplies, eliminating less reliable external power supplies. All models also include an integrated Ethernet interface for remote control of the converters from a central location via the new Converter Utility application for Windows and Mac OS X. In addition, this network interface can also provide power to the device by supporting Power on Ethernet technology. PoE support can eliminate power cabling altogether, or serve as a backup power source! This makes it very easy to install multiple Teranex Mini converters in instrument cabinets Teranex Mini products are also equipped with standard XLR connectors for symmetrical audio lines, digital AES/EBU interfaces or for connecting time code sources. Users can use standard studio cabling with a reliable connector type that has a lock to prevent accidental cable pull. The Teranex Mini's audio circuitry has been completely redesigned for extremely low noise (over -115 dBFS) and maximum audio quality Teranex Mini models also offer Teranex technology for up and down signal conversion. For example, if a Teranex Mini SDI to HDMI model is connected to an HD TV that does not support the Ultra HD standard, the converter will automatically recalculate the input signal so that it can be displayed. Teranex's high-quality circuitry and algorithms make Teranex Mini models ideal tools for TV and post-production studio technicians. Re-synchronization of SDI inputs and low jitter levels allow the use of longer cabling. When converted to the analog domain, video is processed with 12-bit accuracy for minimal noise. Teranex video resolution recalculation technology ensures maximum quality conversion between SD, HD and Ultra HD standards There are six Teranex Mini converter models to choose from - SDI to HDMI, HDMI to SDI, SDI to Analog, Analog to SDI, SDI to Audio and Audio to SDI. In addition, six optical interface variants are also available - Optical to HDMI, HDMI to Optical, Optical to Analog, Analog to Optical, Optical to Audio and Audio to Optical, which feature one SDI connector and one SMPTE-compliant 12G-SD

With SKM-S handheld transmitter with mute switch and dynamic MMD 835 replacement capsule     Frequency range R4-9: 552 - 608 MHz     Polar pattern: Cardioid     Switching bandwidth: 56 MHz     Dynamic range: 134 dB     Frequency range: 20 - 20,000 Hz     Transmitter power: 10 mW     The 4-Digit battery indicator on the receiver     Mobile access via Smart Assist App for system settings     Operating time with AA batteries: up to 8 hours     2 BNC antenna connectors     Outputs: XLR, jack (balanced/unbalanced)     Incl. microphone clamp MZQ 1, 2x antennas, power supply with country adapter, rackmount set and AA batteries

SmallRig RC 450D, SmallRig’s new generation of powerful COB LED video light, employs the “Dharma Shark” optical system with a 55-degree hyper reflector to realize 172,000Lux (1m) and rivals 1.2K HMI Par when working with a 55-degree hyper reflector at the beam angle tested at 5m distance. It features CRI 96+ and TLCI 97+ for accurate color rendering and reproduction, outperforming predecessors, a GaN (Gallium Nitride) adapter that allows for power efficiency of at least 95%, as well as a damping head support system to protect the light. This item, made of metal and V-0 non-inflammable material, is 20% lighter and can be controlled by the switch, SmallGoGo App, or control panel (optional). The Bowens mount supports most light-control accessories to create varied lighting effects. Besides, a carrying bag is included for easier storage and transport. 1x RC 450D COB LED Video Light 1x Adapter 1x Power Cable 1x User Manual (in eight languages) 1x 55-Degree Hyper Reflector 1x Protection Cover 1x Carrying Bag Color Temperature: 5600K(±200K) Product Weight: 3356g Product Dimensions: 290 x 145 x 145 mm Operating Current: 10.2A (@DC 49V) Operating Voltage: DC 49V Adapter Operating Voltage: AC 100~240 V 50/60Hz Radio Frequency: 2.4GHz Power (Max): 499.8W CRI: 96+ TLCI: 97+ APP Control Type: Wireless Wireless Control Range: ≤100m Power Supply: Adapter, AC Adapter, Battery Packing Quantity: 2PCS/CTN Material(s): PC V-0, Metal

SmallRig Shoulder Rig Kit for Sony FX6 4125B is designed to provide a comfortable and convenient solution to shoulder shooting. It consists of Cage Kit for Sony FX6 4124, Shoulder Pad Pro 2837B, Extension Arm 1870, Handgrip Rosette Adapter 3403, Left-Side Wooden Grip 1891, LCD Screen Mounting Clamp Adapter 1831, Lens Support 2681, and Aluminum Alloy Rod 1051. 1. Ergonomic silicone shoulder pad for a comfortable shoulder shooting experience.2. Built-in VCT-14 quick-release baseplate for quick switch between shoulder mode and tripod mode.3. Cage kit protects the camera; V mount battery plate for extra power supply for prolonged operating time.4. Adjustable extension arm meets different needs.5. The wooden grip looks fancy and feels comfortable. SmallRig Shoulder Rig Kit for Sony FX6 4125B is designed to provide a comfortable and convenient solution to shoulder shooting. It consists of Cage Kit for Sony FX6 4124, Shoulder Pad Pro 2837B, Extension Arm 1870, Handgrip Rosette Adapter 3403, Left-Side Wooden Grip 1891, LCD Screen Mounting Clamp Adapter 1831, Lens Support 2681, and Aluminum Alloy Rod 1051. Among these parts, the ergonomic silicone shoulder pad provides a comfortable shooting experience. It features a two-layer quick-release plate on the top, a vertically adjustable 15mm rod clamp at the front for rebalancing the camera and attaching 15mm rods, as well as a VCT-14 quick-release baseplate at the bottom, which works with VCT-14 Quick Release Tripod Plate 2169 to switch between shoulder mode and tripod mode. The form-fitting cage kit protects Sony FX6, offering solutions to V-mount battery, vertical shooting, and accessory attachment. The extension arm is retractable to meet different needs and for easy storage. With the handgrip rosette adapter, the original SONY FX6 handle can be repositioned for shoulder shooting. Besides, the ergonomic left-side grip, made of rosewood, looks fancy and feels comfortable. The LCD screen mounting clamp adapter, an updated version of the original one of SONY FX6, is more durable and safer to use. The lens support well protects the lens mount while further stabilizing shooting. Note: Incompatible with VCT-U14 plate. Compatible With Sony FX6 Top Plate x 1Side Plate x 1Baseplate x 1V Mount Battery Plate x 1Power Cable x 1Shoulder Pad Pro x 1Extension Arm x 2Handgrip Rosette Adapter x 1Left-Side Wooden Grip x 1LCD Screen Mounting Clamp Adapter x 1Lens Support x 1Aluminum Alloy Rod x 2 Product Dimensions: 393.3 x 260.1 x 188.1mmPackage Dimensions: 330.0 x 255.0 x 200.0mmProduct Weight: 2312.0 ± 10.0gPackage Weight: 3610.0 ± 10.0gMaterial(s): Aluminum Alloy, Stainless Steel, Silicone, PC

Desview Atlas X 4K TX/RX professional wireless video transmitter and receiver for smooth, long-distance 4K image transmission without delay. Ideal for filmmakers, broadcasters, and live events. Catalog number des-AtlasX4K-TX/RX. Robust construction, easy to use, and reliable performance. Enhance your production with this top-of-the-line wireless solution. 🌟Key features:● True Ultra-HD 4K and 24Mbps high bitrate● Automatic frequency hopping, anti-interference across the band● Utilize the latest generation H.265 video encoding and decoding● Ultra-low latency of 35ms● Ultra-long transmission distance of kilometers● Support UVC streaming, perfect for live-streaming● Full HDMI & SDI support● 1.05-inch Full-Color LCD display● Dual power supply: NP-F battery and a DC adapter● Aerospace aluminum material True Ultra-HD 4K24Mbps high bitrateNative 4Kp60 HDR Automatic frequency hopping, anti-interference across the bandUltra-low latency of 35msSupport UVC streaming, perfect for live-streamingUltra-long transmission distance of three kilometerUtilize the latest generation H.265 video encoding and decodingFull HDMI & SDI support Ultra-HD 4K and24Mbps High BitrateAtlas X video transmission supports Ultra-HD 4K and 24Mbps high bitrate, meeting the 4K monitoring demand fully. For shooting crews like short films, TVCs and ads, who demand high image quality, Atlas X keeps monitoring and collaboration smooth. The Latest Generation H.265 Video Encoding and Decoding, With Bandwidth Reduced to 50%H.265 further improves low bitrate performance. Compared with H.264, it saves 40%-50 % bitrate while keeping higher image quality. The technology also boosts network adaptability, performs more stably under complex network conditions, and supports smooth transmission in low bandwidth environments. Ultra-Low Latency of 35msTriple-band simultaneous transmission delivers an average one-to-one latency of 35ms in real tests.Real-time virtual production stays perfectly in synchronization, no motion blur and no audio-video misalignment. Multi-Band Simultaneous Transmission and Anti-Interference Across the BandAtlas X uses Desview's self-developed multi-band simultaneous transmission technology (2.4GHz+5GHz+6GHz+DFS channels), intelligently routing data across 23 channels, for achieving multi-band data-streaming simultaneous transmission. DFS channel delivers extra regulation-compliant, and interference-free channels for the extreme stability demanded on professional sets. Besides, Atlas X switches channels without blackouts for even smoother transmission. Stable Long-Distance Coverage, Range Up to Kilometers Thanks to triple-band transmission, Atlas X reaches a transmission distance of up to 3km in open, obstacle-free environments. It handles large-scale mobile shootings with strong wall-penetration power, meeting on-set monitoring demands in any complex environments. Support UVC Streaming, Perfect for Live-StreamingBoth transmitter and receiver support UVC protocol, so you can set up your live-streaming camera wherever you want-fast, flexible, hassle-free, useful for no drivers needed OBS and TikTok live studio. Full HDMI & SDI Support, Create Anywhere and AnytimeTransmitter supports simultaneous HDMI input and SDI input, and HDMI loop-out for real-time monitoring. Receiver supports simultaneous HDMI output and SDI output, so director monitoring, DIT backup, and streaming encoding can all run at once, cutting setup costs to a minimum. 1.05-inch Full-Color LCD DisplayShow signal status, channel band and battery level in real time, all data visualized on screen for faster settings. Power Freedom, No More Battery AnxietyDual power supply from NP-F battery and a DC adapter keeps you running all day without a break, making sure that shootings stay on schedule. Military-Grade Design, Fearless of CollisionAerospace aluminum material meets military-grade anti-collision and scratch resistance. The built-in thermal system keeps core temperature ≤45°C under heavy

SmallRig RC 450B, SmallRig’s new generation of powerful COB LED video light, employs the “Dharma Shark” optical system and a 55-degree hyper reflector to realize 121,000Lux (@1m). It features CRI 96+ and TLCI 97+ for accurate color rendering and reproduction, outperforming predecessors, a GaN (Gallium Nitride) adapter that allows for power efficiency of at least 95%, as well as a damping head support system to protect the light. This item, made of metal and V-0 non-inflammable material, is 20% lighter and can be controlled by the switch, SmallGoGo App, or control panel (optional). The Bowens mount supports most light-control accessories to create varied lighting effects. Besides, a carrying bag is included for easier storage and transport. 1x RC 450B COB LED Video Light 1x Adapter 1x Power Cable 1x User Manual (in eight languages) 1x 55-Degree Hyper Reflector 1x Protection Cover 1x Carrying Bag Color Temperature: 2700K-6500K(±200K) Product Weight: 3356g Product Dimensions: 290 x 145 x 145 mm Operating Current: 10.2A (@DC 49V) Operating Voltage: DC 49V Adapter Operating Voltage: AC 100~240 V 50/60Hz Radio Frequency: 2.4GHz Power (Max): 499.8W CRI: 96+ TLCI: 97+ APP Control Type: Wireless Wireless Control Range: ≤100m Power Supply: Adapter, AC Adapter, Battery