Aluminum Rail

DARK ROCK 6Silent performance and compatibilityDark Rock 6 delivers powerful cooling in a compact design, offering high compatibility and virtually inaudible operation for an impressive gaming experience. Semi-passive quiet mode with full fan stop for completely silent operation Hardware switch to toggle between performance and quiet modes 6 optimized high-performance heat pipes Silent Wings 135mm PWM fan for perfect air pressure and virtually inaudible operation Only 31.1dB(A) at maximum fan speed High RAM and VRM cooler compatibility thanks to an asymmetrical design and cut-outs on the heat sink Easy mounting system for fan and heat sink Elegant be quiet! look with magnetic top cover KEEP IT COOL AND QUIETSemi-passive quiet and active performance modeDark Rock 6 raises the bar for silent cooling. Its mode switch lets you choose either active performance mode for advanced cooling power or semi-passive quiet mode, keeping the fan off below 40% PWM. Both modes ensure quiet and reliable performance in any workload.HIGH COOLING POWERSuperior heat dissipationWith 6 optimized high-performance copper heat pipes and a dense aluminum fin array, Dark Rock 6 offers robust cooling. A special black coating with ceramic particles enables perfect heat transfer from the heat sink to the air, keeping your system cool.SPECIAL SILENT WINGS 135MM PWM FANFor high performance and virtually inaudible operationThe custom-designed Silent Wings 135mm PWM fan uses an advanced fluid-dynamic bearing, a smooth 6-pole motor and optimized blades. Thanks to the tight tip clearance, it boosts air pressure and improves the airflow.UNMATCHED COMPATIBILITYDesigned for all kinds of RAM and VRM coolersDark Rock 6's asymmetrical design and heat sink cut-outs increase RAM and VRM cooler compatibility significantly and enable limitless memory height.EASY MOUNTINGInstallation is a breezeThanks to its convenient, preinstalled mounting bridge and a firm yet gentle fixing method, cooler attachment is a breeze. The fan uses an efficient rail system for mounting, so installation is easier than ever with Dark Rock 6.ICONIC DESIGNAesthetics meet functionalityDark Rock 6 does not compromise on style. A magnetic top cover masks heat pipe ends and the screw hole. Side covers complete the sleek, clean signature be quiet! design for Dark Rock CPU air coolers.COMPATIBLE WITH LIQUID METAL THERMAL GREASECooling power beyond beliefThanks to a nickel-plated base, Dark Rock 6 is compatible with liquid metal thermal grease such as DC2 Pro. The properties of the liquid metal compound combined with Dark Rock 6 allow high-end CPUs to perform at even higher levels.

SmallRig Cage for Nikon Z 8 3940 is designed to protect the camera and attach accessories. Locking the camera via one bottom 1/4 "-20 screw, one locating screw, and one side lock adapter on the right, the cage features rubber pads that prevent scratches and gives full access to buttons, card slots, flip screen, and battery door. Among its accessory mounting points, 1/4"-20 threaded hole, 3/8"-16 threaded hole, and ARRI 3/8"-16 locating hole support Side Handle 2093 & 3814, Top Handle 3765, Monitor Mount 2903 & 2904, Manfrotto Plate 1280, mini V Mount Battery Plate 2987; side 1/4"-20 locating hole fits Single Rod Clamp 3598 and Magic Arm 3873; and left NATO rail quickly connects Side Handle 3847 & 4017. Besides, there are cold shoe mounts for the microphone and LED video light; strap holes for Hand Strap 3848; and QD mounts for the QD strap buckle. The bottom Arca-Swiss quick-release plate supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals for a quick switch between gimbal, handheld, and tripod modes. A double-ended wrench is also included for easy disassembly and assembly. 1. Full cage protects the camera without blocking buttons. 2. Locks camera via one 1/4"-20 screw at the bottom, one locating screw, and one side lock adapter on the right. 3. 1/4"-20 threaded hole, 3/8"-16 threaded hole, ARRI 3/8"-16 locating hole, cold shoe mount, NATO rail, QD mount, strap slot. 4. Arca-Swiss quick-release plate for Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals. Note: Please remove the split ring on the right of the camera before installing this cage. Compatible With Nikon Z 8 Cage x 1 User Manual x 1 Product Dimensions: 159.1 x 56.8 x 131.0mm Package Dimensions: 184.0 x 178.0 x 80.0mm Product Weight: 203.0 ± 5.0g Package Weight: 371.5 ±5.0g Material(s): Aluminum Alloy

Industrial power supply 24V, 20A, 480W, DIN. Features: Aluminum high-power industrial switching power supply designed for mounting on a standard 35 mm DIN rail. Protection: overload, overtemperature, overvoltage, and short-circuit protection. Cooling by free air convection. The metal casing improves heat dissipation. No load consumption: Specifications: Type: switching power supply. Input range AC: 90-264V. Frequency: 47-63Hz. Output voltage DC: 24V. Rated current: 20A. Rated power: 480.8W. AC current: 4.8A/115V, 2.1A/230V. Ripple and noise: 240mvp-p. Efficiency: 92%. Leakage current: Warranty: 24 months.

Industrial power supply 24V, 20A, 480W, DIN. Features: Aluminum high-power industrial switching power supply designed for mounting on a standard 35 mm DIN rail. Protection: overload, overtemperature, overvoltage, and short-circuit protection. Cooling by free air convection. The metal casing improves heat dissipation. No load consumption: Specifications: Type: switching power supply. Input range AC: 90-264V. Frequency: 47-63Hz. Output voltage DC: 24V. Rated current: 20A. Rated power: 480.8W. AC current: 4.8A/115V, 2.1A/230V. Ripple and noise: 240mvp-p. Efficiency: 92%. Leakage current: Warranty: 24 months.

SmallRig Weight-Reducing Sling Handgrip Kit for DJI RS 3 / RS 3 Pro / RS 2 4383 is specially designed for DJI RS 2 / RS 3 / RS 3 Pro. You just need to attach the baseplate to the bottom of a DJI gimbal via the 1/4-20” screw, sling the shoulder strap over your right shoulder, and then extend the gimbal tripod. When you shoot, simply pick up the gimbal; in static shot, it can release almost all stress on your arms. When you don't shoot, simply let go of the gimbal and sling it against your front or against your side like a shoulder bag, largely reducing the arm's burden. The shoulder strap features QD mounts and sling swivels that enable easy accessory attachment and length adjustment. 1/4-20” and 3/8-16" threaded holes in the baseplate allow attaching tripods or other devices. The sling handgrip quickly secures the left side of a gimbal via the NATO clamp, which comes with an anti-drop design for added safety. Built-in 1/4”-20 holes and ARRI 3/8"-16 locating holes support Magic Arm 2115C, Monitor Mount 2903B; cold shoes on the top and side as well as NATO rail support Monitor Mount 3026B, microphone, image transmitter, etc. Also, the handgrip can tilt 0-180 degrees via a ratchet knob or act as a side handle to meet different needs; it is partly made of non-slip, anti-freeze silicone and aluminum alloy, ergonomically designed to hold comfortably. Overall, the delicate and compact kit works perfectly with gimbals. 1. Specially designed for DJI RS 2 / RS 3 / RS 3 Pro; the shoulder straps together with the sling handgrip makes for easier shooting.2. Reduces burden on your arms in low-angle, high-angle, long-time standing shooting.3. Highly compatible: 1/4-20″ threaded hole, ARRI 3/8"-16 locating hole, cold shoe, and QD quick-release mount.4. Adjustable angle: handgrip tilts 0-180 degrees via a ratchet knob or acts as a side handle.5. Two slide buckles for easy adjustment of strap length.6. 1/4-20” and 3/8-16" threaded holes in the baseplate for tripods or other devices. Note:1. 4118 must work with a sling handgrip.2. 4118 is incompatible with RS 3 mini or RSC 2.3. Sling handgrip load capacity: 6kg. Compatible WithDJI RS 2DJI RS 3DJI RS 3 Pro Shoulder Strap x 1Baseplate x 1Hex Spanner x 1QD Sling Mount x 1Sling Handgrip x 1 Sling Handgrip Dimensions: 199 x 68.3 x 54.5 mmShoulder Strap Dimensions:49 x 16 x 920 mm (Min.)  49 x 16 x 1500 mm (Max.)Package Dimensions: 245 x 164 x 65 mmProduct Weight: 613.0±5.0gPackage Weight: 723.0±5.0gMaterial(s): Aluminum Alloy, Stainless Steel, Polyester

Prologo Scratch EVA 140 Tirox Women’s Aluminum Black Saddle The Scratch EVA is the first Prologo saddle specifically adapted to female anatomy. It was developed in collaboration with some of the best cyclists from UCI World and UCI Continental teams with the aim of combining comfort and performance. Rails: TIROX 7 mm Ø lightweight alloy stainless steel rails. Weight: 232 g.

Industrial power supply 24V, 20A, 480W, DIN.  Features:  Aluminum high-power industrial switching power supply designed for mounting on a standard 35 mm DIN rail. Protection: overload, overtemperature, overvoltage, and short-circuit protection. Cooling by free air convection. The metal casing improves heat dissipation. No load consumption: < 0.3W. Complies with the industrial immunity standards IEC 61000-6-2 (BS EN/EN61000-6-2). Suitable for industrial control systems, factory automation, semiconductor manufacturing equipment, electromechanical equipment, etc.  Specifications:  Type: switching power supply. Input range AC: 90-264V.  Frequency: 47-63Hz. Output voltage DC: 24V. Rated current: 20A. Rated power: 480.8W. AC current: 4.8A/115V, 2.1A/230V. Ripple and noise: 240mvp-p. Efficiency: 92%. Leakage current:

SmallRig Cage Kit for Sony Alpha 7 III / Alpha 7R III 4198 is designed to facilitate a low-angle shot and protect the camera while offering a wide range of accessory mounts. It includes a cage, an HDMI cable clamp, and a top handle. The top handle feels comfortable and enables easy carrying at a low-angle shot. 1/4"-20 threaded holes, ARRI 3/8" -16 locating holes, cold shoes and NATO rails and QD socket support monitor mount 2294, microphones, LED lights, monitor mount 2903B, NATO accessories. The HDMI cable clamp, mounted onto the left side of the cage via two 1/4"-20 screws, prevents deflection and fixes cables with a thumbscrew to protect interfaces and ensure stable signal transmission. In addition, holes on both sides of the cage allow for attaching hand straps. The cage comes with a built-in magnetic flat-head screwdriver & hex spanner for easy disassembly and assembly. 1. Portable handheld kit for an easy low-angle shot. 2. Triple-point locking for enhanced stability and anti-twist. 3. HDMI cable clamp protects interfaces and ensures stable signal transmission. 4. A hinged arm at the battery door fits the camera curve and enhances the grip experience. 5. Multiple mounting points: 1/4"-20 threaded holes, ARRI 3/8" -16 locating holes, cold shoe mounts, NATO rails and QD socket support handles, microphones, LED lights, monitors, etc. Note: Please remove the split D-ring on both sides of the camera before installing the cage. Compatible With Sony Alpha 7 III Sony Alpha 7R III 1 x Cage 1 x HDMI Cable Clamp 3637 1 x ARRI Locating Handle 3765 2 x Allen Wrench 2 x 1/4''-20 Screw Product Dimensions: 150.2 x 135.0 x 175.0mm Package Dimensions: 180.0 x 129.5 x 75.0mm Product Weight: 315.0±5.0g Package Weight: 400.0±5.0g Material(s): Aluminum Alloy, Stainless Steel, Silicone

SmallRig HawkLock Quick Release Cage for Canon EOS R6 Mark II 4159B is designed to provide protection and attach accessories. It locks the camera via one 1/4"-20 screw at the bottom and one side lock adapter on both sides, with rubber pads preventing scratches. The cage maintains access to the camera button, card clot, screen, and battery door and comes with multiple accessory mounts. They include, among others, a 1/4"-20 threaded hole, 3/8"-16 threaded hole, and ARRI 3/8"-16 locating hole that supports Side Handle 2093 & 3814, Top Handle 3765, Monitor Mount 2903 & 2904, Manfrotto Bottom Plate 1280 & 2458, Holder for Portable Power Banks 2336 and mini V Mount Battery Plate 2987. 1/4"-20 locating holes on both sides fit Single Rod Clamp 3598  and Magic Arm 3873, and two 1/4"-20 threaded holes in the horizontal direction on the right side ensure stable vertical shooting. 1. One-piece full cage protects the camera.2. Locks the camera via one 1/4 "-20 screw and two side lock adapters.\3. Accessory mounting points: 1/4"-20 threaded hole, 3/8"-16 threaded hole, ARRI 3/8"-16 locating hole, HawkLock H18 cold shoe mount, HawkLock H21 NATO rail, QD socket, hand/shoulder strap hole, etc.4. Built-in HawkLock H21 NATO rails for quick attachment of NATO clamp accessories.5. Two 1/4"-20 threaded holes on the right side ensure stable vertical shooting.6. HawkLock H38 Arca-Swiss quick-release plate supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 / RS 4 / RS 4 Pro stabilizers. SmallRig HawkLock Quick Release Cage for Canon EOS R6 Mark II 4159B is designed to provide protection and attach accessories. It locks the camera via one 1/4"-20 screw at the bottom and one side lock adapter on both sides, with rubber pads preventing scratches. The cage maintains access to the camera button, card clot, screen, and battery door and comes with multiple accessory mounts. They include, among others, a 1/4"-20 threaded hole, 3/8"-16 threaded hole, and ARRI 3/8"-16 locating hole that supports Side Handle 2093 & 3814, Top Handle 3765, Monitor Mount 2903 & 2904, Manfrotto Bottom Plate 1280 & 2458, Holder for Portable Power Banks 2336 and mini V Mount Battery Plate 2987. 1/4"-20 locating holes on both sides fit Single Rod Clamp 3598  and Magic Arm 3873, and two 1/4"-20 threaded holes in the horizontal direction on the right side ensure stable vertical shooting. On its top and left side are HawkLock H21 NATO rails for NATO Top Handle 3766, 4438, Monitor Mount 2906B, and Rotating NATO Side Handle 3847, 4485. The cage also features a HawkLock H18 cold shoe mount to attach microphone, LED video light, etc., strap holes for Hand Strap 3848 & 2456, as well as a QD socket, an innovative strap slot for downward hanging for extra lens protection compatible with the Quick Disconnect System for shoulder strap. Another highlight is the HawkLock H38 Arca-Swiss quick-release plate, which supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro / RS 4 / RS 4 Pro stabilizers for a quick switch between stabilizer, handheld, and tripod modes. Besides, there is a double-head wrench for easy disassembly and assembly. Compatible With Canon EOS R6 Mark II 1 x Cage2 x Side Lock Adapter1 x User Manual Product Dimensions: 152.5 x 64 x 116.5mm Package Dimensions: 180 x 129.5 x 75mmProduct Weight: 172g ± 5gPackage Weight: 249.5g ± 5g Material(s): Aluminum Alloy

Basic cage kit for Canon R50 V. This cage protects your camera body and allows you to attach a wide range of external accessories using several mounting options, including a slide rail, NATO rail, and 1/4"-20 threads with locating points. The ARCA plate at the bottom ensures easy compatibility with ARCA receivers, such as those found on Tilta tripods, as well as Ronin S series stabilizers. This cage has a new design that allows you to remove the three main mounting points when you don't need them, as the NATO rail, slider, and ARCA plate are all removable. The design includes an integrated grip with a rubber grip that conforms to the shape of your palm, making it more comfortable to hold the camera in your hand than with a traditional cage. The cage still allows you to easily access all the basic functions of the camera, so you have continuous access to ports, user buttons, and battery space without having to remove the cage. The top handle also expands your mounting options with additional 1/4"-20 threads and a slide mount, ideal for an external monitor. Key features: Tailor-made for the Canon R50 V camera body Attach accessories using the shoe, NATO rail, and 1/4"-20 threads with locating points NATO top handle expands mounting options while improving flexibility in control and handling ARCA bottom plate is ready for ARCA tripod receivers and Ronin S series stabilizers Removable mounts allow users to reduce weight when specific mounting points are not needed Package contents: Full cage for Canon R50 V Tilta Compact NATO Top Handle Technical specifications: Dimensions: 26.9 x 20.1 x 4.8 cm Weight: 862 g Materials: aluminum alloy Color: black

Basic cage kit for Canon R50 V. This cage protects your camera body and allows you to attach a wide range of external accessories using several mounting options, including a slide rail, NATO rail, and 1/4"-20 threads with locating points. The ARCA plate at the bottom ensures easy compatibility with ARCA receivers, such as those found on Tilta tripods, as well as Ronin S series stabilizers. This cage has a new design that allows you to remove the three main mounting points when you don't need them, as the NATO rail, slider, and ARCA plate are all removable. The design includes an integrated grip with a rubber grip that conforms to the shape of your palm, making it more comfortable to hold the camera in your hand than with a traditional cage. The cage still allows you to easily access all the basic functions of the camera, so you have continuous access to ports, user buttons, and battery space without having to remove the cage. The top handle also expands your mounting options with additional 1/4"-20 threads and a slide mount, ideal for an external monitor. Key features: Tailor-made for the Canon R50 V camera body Attach accessories using the shoe, NATO rail, and 1/4"-20 threads with locating points NATO top handle expands mounting options while improving flexibility in control and handling ARCA bottom plate is ready for ARCA tripod receivers and Ronin S series stabilizers Removable mounts allow users to reduce weight when specific mounting points are not needed Package contents: Full cage for Canon R50 V Tilta Compact NATO Top Handle Technical specifications: Dimensions: 26.9 x 20.1 x 4.8 cm Weight: 862 g Materials: aluminum alloy Color: silver

The Falcon Eyes Paper Back Drop Rolls are of high quality and various colours and sizes. Not only are the paper background rolls an economical replacement for cloth backgrounds, but they also form a flat and solid background, making it easier for the photographer to shoot their desired objects. Further, all Falcon Eyes background rolls come on a sturdy cylinder, which can easily be placed on a backdrop support. The following sizes are available: - 1.35 x 11 meters - 2.75 x 11 meters - 2.75 x 25 meters - 2.75 x 50 meters - 3.56 x 30 meters Please note: due the difference in computer monitor screens, worldwide, the colours of the backdrop may differ slightly from the picture shown. Please also note: Different shipping costs are calculated for long packages (over 2.3 meters long) such as background rolls (2.75 meters) and celling rail systems (3 meters). - Within the Netherlands, each long package is charged at an extra € 15. - For long packages needing to go to Belgium, the cost is €18,50 per package. - For all other countries, please do not hesitate to contact us for a price. Background rolls with a width of 3.56 meters will be shipped free of charge within the Netherlands. Please contact us to determine the shipping costs for these background rolls for delivery outside of the Netherlands.

SmallRig Handheld Cage Kit for Sony FX30 / FX3 4184 is designed to protect camera and provide accessory mounting points, hence improved shooting experience. The kit includes a cage, a HDMI cable clamp, a XLR handle extension rig and a hand strap. Among them, the extension is ergonomically designed for comfortable grip and equipped with accessories mounts; Hand Strap 3848 helps increase stability and safety; the dedicated HDMI cable clamp protects interfaces to ensure stable signal transmission. Overall, the kit comes with 1/4"-20 threaded holes for Magic Arm 3873 for monitor; ARRI 3/8"-16 locating holes for Monitor Mount 2903B, Side Handle 2914; cold shoe mounts for microphone, LED light; 1/4"-20 locating holes at the top-left quarter and on the left side for Rod Clamp 3598 for follow focus; and a NATO rail on the left side for Side Handle 2187B. An Arca-Swiss quick release plate at the bottom allows for quick switch between tripod mode and handheld mode. Besides, a slotted screwdriver is included for easy assembly and disassembly. 1. Handheld cage kit for Sony FX30 / FX3, with hand strap to facilitate shooting.2. XLR handle extension for improved grip experience and added accessory mounts.3. Dedicated HDMI cable clamp ensures stable signal transmission.4. 1/4"-20 threaded holes, ARRI 3/8"-16 locating holes, cold shoe mounts, NATO rails, QD port for handle, microphone, LED light, monitor, hand strap, etc.5. Arca-Swiss quick release plate at the bottom for quick switch between tripod mode and handheld mode. Compatible WithSony FX30Sony FX3 1 x Cage2 x NATO Rail1 x HDMI Cable Clamp1 x XLR Handle Extension Rig1 x Hand Strap2 x 1/4”-20 Screw1 x Allen Wrench Product Dimensions: 159 x 118 x 165mmPackage Dimensions:180 x 129.5 x 78mmProduct Weight: 318±5gPackage Weight: 424±5gMaterial(s): Aluminum Alloy, Stainless Steel, PU Leather, Microfiber Leather

THE TFRP RUDDERThrustmaster Flight Rudder Pedals: DESIGNED FOR ALL USERS Compatible on PC with all joysticks on the market, also compatible on PS4 with the T.Flight Hotas 4 joystick. Features:The set is ready for immediate flight First set of pedals with S.M.A.R.T function, guide system for better and easier control; Ergonomic design allows you to put the whole foot on the pedal; You can arrange your feet as it suits you on the whole pedal or only on half; Two large pedals (10 inches / 25 cm) S.M.A.R.T (Sliding Motion Advanced Rail Track) advanced rail system System of 4 guides made of aluminum made of the highest quality aluminum to ensure even better and smoother movement; Self-centering system: Idaelanie balanced system between smoothness of movement and resistance for auto-centering; Large range of motion for even more effective control; The universal, ergonomic design is suitable for all types of flight (air fights, space flight, flight with civil machines, etc.); The possibility of removing the support for the heels allows the pedals to be operated with heels based on the floor; Large base and inclined construction combines comfort with stability; Two differential brake pedals Large brake pedal differential: 10 inches / 25 cm (12/45 shoe size) 15 ° heel angle; Connectivity via USB and / or RJ12 cable On PC (Windows 10/8/7 / Vista), works with all joysticks on the market thanks to Thrustmaster drivers *** On PC, compatible with all multi-USB supporting games Connects directly to the Thrustmaster T.Flight Hotas 4 * / ** on the PC and PS4

The SmallRig "Rhinoceros" Cage for Sony Alpha 7 V / 7R V / 7 IV 6029 is designed to provide versatile expansion options and robust protection for your camera. The cage is equipped with a three-point locking system with a bottom positioning pin, a 1/4"-20 screw, and an M2.5 screw on the left side, ensuring secure mounting without flexing and without the need to remove the camera's triangular eyelets. Its sleek, aerodynamic design ensures unobstructed access to all controls on the top panel of the camera for easy operation. Integrated pads provide comprehensive protection and prevent scratches, while precise cutouts ensure unobstructed access to the camera's ports, controls, buttons, and battery compartment. With multiple mounting points —including 1/4"-20 threaded holes, ARRI 3/8"-16 positioning holes, cold shoe mounts, NATO rails, and QD sockets—this frame allows for easy attachment of handles, microphones (compatible with DJI Mic 2), lights, monitors, and other accessories. An integrated Arca-Swiss quick-release plate on the bottom allows for a smooth transition between handheld, tripod, and gimbal setups (compatible with Arca-type tripods and DJI RS 2 / RSC 2 / RS 3 Mini / RS 3 / RS 3 Pro / RS 4 Mini / RS 4 / RS 4 Pro gimbals). In addition, the hinged door in the battery compartment provides support for your little finger, while the included HDMI cable clamp secures the cable for stable data transfer. Rhinoceros Cage x 1User manual x 1Warranty card x 1 Product dimensions: 149.9 × 71.2 × 107.9 mm / 5.9 × 2.8 × 4.2 inchesPackage dimensions: 180.0 × 129.5 × 75.0 mm / 7.1 × 5.1 × 3.0 inchesProduct weight: 180.0 ± 5.0 g / 6.3 ± 0.2 ozPackage weight: 269.0 ± 5.0 g / 9.5 ± 0.2 ozMaterials: aluminum alloy, carbon fiber, stainless steel, silicone