Apple Laptop

2m USB Type C to DP 8K60 Adapter Cable with HDR Connect a DP display to your computer´s USB Type C port - Connects a 4K or 8K DP display to a computer equipped with a USB Type C port - Supports DisplayPort resolutions up to 7680x4320@60Hz and 3840x2160@144Hz - Perfect for connecting Macbooks (incl. Apple M1), laptops and PCs to modern DP displays - Requires DisplayPort Alternate Mode support by the USB Port/Bus

Metal USB 3.2 Gen 1 (USB 3.0) multi-port hub AXAGON HMA-CR3A connects up to three USB devices to laptop or computer and also adds SD / microSD card reader. The metal hub body is made of aluminum and provides perfect mechanical protection for frequent carrying. Elegant finely structured body surface against fingerprint. Rubber pads prevent slipping up on the table. Permanently fixed 20 cm long USB cable is ideal for users of mobile devices. This compact multiport hub also handles the permanent connection of several external drives. Thanks to the fast USB 3.2 Gen 1 interface is transfer speed up to 5Gb/s. The hub will also charge phones and tablets with a current up to 1.5A/5V. So hub can easily charge an Android smartphone, Apple iPhone, Apple iPad etc. Card reader supports all current versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. High data transfer speed ensured by USB 3.2 Gen 1 interface. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The USB multi-port hub is the ideal accessory for ultrabooks with a small number of USB-A ports and missing card reader. The hub does not even frighten to connect with phones using the appropriate OTG or USB-A > USB-C adapter. You can connect a flash drive, keyboard, mouse and card reader to your phone or tablet. Input:   1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-A male connector.     Backward compatible with USB 3.1 Gen 1 / USB 3.0 / USB 2.0 and USB 1.1. Connecting USB type A male connector on a fixed 20 cm long cable. Output: 3x SuperSpeed USB port, USB-A female connectors. Support transfer rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transfer rate of the box is given by the USB 3.2 Gen 1 interface (theoretically up to 5 Gbit/s). USB hub handle the permanent connection of several external drives. Card reader - two slots: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash, SD slot: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0 / 1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MMC and eMMC 3.x / 4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Support for SD 3.01 and SD Jukebox applications (CPRM functions). Ultra High Speed UHS-I support (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - in file managers, the reader is indicated as two disk drives. FAT 12 / 16 / 32, NTFS, exFAT (FAT 64) file formats support. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Sleep mode support. The high quality shielded cable ensures high communication speed and minimal undesirable interference. White LED indicates the connection to the computer's USB port. Power supply via USB bus (USB bus power). Dimensions 84 x 24 x 18 mm. Weight 42 g (incl. cable). USB cable length 20 cm. Power / Charging: USB power is sufficient to connect low-power USB devices (mouse, keyboard, card reader, flash drive, etc.) or self-powered (printer, scanner, 3.5" external drive) to all four ports. The USB hub can also handle the permanent connection of several external drives simultaneously. Charge mobile devices (including iPad) with current up to 1.5A in each of the hub ports. The total charging current (which is divided into ports) reaches up to 2.8A at 5V (depending on the capabilities of the computer's USB port). Supported OS: MS Windows XP / Vista / 7 / 8 / 8.1 / 10 and later, Windows Server 2003 / 2008 / 2012 / 2016 and later (supported are all 32 and 64-bit versions of Windows OSs), MacOS X 10.4.x and later, Linux

Premium connection USB-C USB-C Data and Charging AXAGON BUCM2-CM25AB CHARGE cable with USB-C male connectors at both ends. The cable is designed especially for charging and powering computers, monitors, laptops, phones, tablets and other devices. It also supports data transfer speeds of up to 480 Mb/s. The cable has implemented the latest specification of Power Delivery 3.1 charging technology. This technology delivers, among other things, a power output of 240W which is more than double that of Power delivery 3.0, which delivers 100W. You can use not only the (Standard Power Range SPR) for voltages of 5, 9, 15 and 20V with a current of 5A, but also sufficient power in fixed voltages of 28, 36 and 48V with a maximum current of 5A (Extended Power Range - EPR). Thanks to the new PD 3.1 technology, you can also use the cable to power devices with much more power, such as gaming laptops, 4K monitors, power tools or the increasingly popular e-scooters. To identify the cable and its current capabilities, the cable has an integrated E-Mark chip. The cable is also compatible with Quick Charge, PPS, Samsung AFC and SFC, Apple, SMART and other charging technologies. Durable, extended-life bidirectional cable features metal terminals, nickel-plated connectors and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: 2x USB-C (M) male.  Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the connected device. USB 480Mbps (USB 2.0), compatible with USB 1.1.  Supports 480 / 12 / 1.5 Mb/s transmission rates. Supported charging technologies: Power Delivery 2.0/3.0/3.1 - 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, PPS, Samsung Adaptive Fast Charging and Super Fast Charging, Huawei Fast Charge Protocol, Apple Fast Charging, SMART Charging and others. Support Extended Power Range (EPR) specification up to 240W and Standard Power Range (SPR) specification up to 100W. Support for fast charging with a current of up to 5A. Integrated E-MARK chip. Cable includes power wires 22AWG, data wires 30AWG.  Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for computers, laptops, mobile phones, tablets, power banks, power tools and other devices with USB-C connector. Other data:  cable length 2.5 m, 4.6 mm outer diameter of the cable. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.

Premium connection USB-C USB-C data and charging AXAGON BUCM32-CM05AB SPEED+ USB 20Gbps (3.2 Gen 2x2) cable with USB-C male connectors at both ends. The cable is designed for very fast data transfers, video transfer and charging laptops, phones, tablets and other mobile devices with up to 100W of power. It also allows you to connect monitors, docking stations and external SSDs. The cable is designed to transfer data at a maximum speed of up to 20 Gb/s and can easily handle 10 Gb/s (USB 3.2 Gen 2). It also supports up to 4K/60Hz Ultra HD video and audio transmission. This makes the cable an ideal accessory for the iPhone 15 Pro and Pro Max (or later), which allow data transfer speeds of up to 10 Gb/s. Its compatibility with MacBooks and other storage devices, such as NVMe M.2 external drives, ensures your data transfer will be 10x faster than with a standard cable or AirDrop wireless connection.  Thanks to the integrated E-Mark chip, the cable can charge connected devices with a current of 5A up to 100W. It is compatible with Power Delivery 3.0, Quick Charge 4+ or Quick Charge 3.0 charging technologies for very fast charging not only smartphones and tablets, but also laptops. Compatibility is also ensured with other fast phone charging standards such as Apple iPhone, iPad, Samsung. The main advantage of the power cable is the Power Delivery 3.0 standard for charging Apple MacBook, Lenovo, Asus, HP, Dell and other laptops. You can charge your laptop directly from a USB-C charger or with the increasingly popular docking stations and port replicators.  Cable conductors are made of Tin-plated oxygen free copper. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) and 32AWG data wires guarantee fast charging and reliable data transfer of connected devices. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. Triple shielding protects transmitted signals from adverse interference.  The cable is equipped with aluminum end caps, connectors with nickel-plated surface and gold-plated contacts. The final strength of the cable is provided by the nylon braid. The braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The bonus is the included practical strip for easy packing of the cable. Connectors: 2x USB-C (M) male. Data transmission: USB 20Gbps (USB 3.2 Gen 2x2), also compatible with USB 10Gbps (USB 3.2 Gen 2). Support for second-generation data rates of 20.000 / 10.000 Mb/s. Backward compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0) / USB 2.0 (USB 480Mbps). Supported transmission rates 5.000 / 480 Mb/s. Video transmission: 4K resolution 4096 x 2160 at up to 60Hz, 2K/WQHD resolution 2560 x 1440 at up to 120Hz, FHD resolution 1920 x 1080 at up to 240Hz. HDR support (High dynamic range, 10-bit support) - realistic reproduction of light and dark details. Audio transmission support - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. Supported charging technologies (up to 100W): SMART / Apple 2.4A (iPad). AFC / SFC / SFC 2.0: Samsung Charging. QC 2.0 / QC 3.0 / QC4+: Qualcomm Quick Charge. PPS (part of USB PD 3.0 and QC4+). PD 2.0 / PD 3.0: USB Power Delivery - 100W (20V/5A). Support for fast charging with a current of up to 5A. Integrated E-MARK Chip. Other features:  Cable includes power wires 22AWG, data wires 32AWG.  Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding with plated foil and tinned copper braid minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection.  Cable length 0.5 m. outer diameter of the cable 5.0 mm. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and

Premium connection USB-C USB-C Data and Charging AXAGON BUCM2-CM30AB CHARGE cable with USB-C male connectors at both ends. The cable is designed especially for charging and powering computers, monitors, laptops, phones, tablets and other devices. It also supports data transfer speeds of up to 480 Mb/s. The cable has implemented the latest specification of Power Delivery 3.1 charging technology. This technology delivers, among other things, a power output of 240W which is more than double that of Power delivery 3.0, which delivers 100W. You can use not only the (Standard Power Range SPR) for voltages of 5, 9, 15 and 20V with a current of 5A, but also sufficient power in fixed voltages of 28, 36 and 48V with a maximum current of 5A (Extended Power Range - EPR). Thanks to the new PD 3.1 technology, you can also use the cable to power devices with much more power, such as gaming laptops, 4K monitors, power tools or the increasingly popular e-scooters. To identify the cable and its current capabilities, the cable has an integrated E-Mark chip. The cable is also compatible with Quick Charge, PPS, Samsung AFC and SFC, Apple, SMART and other charging technologies. Durable, extended-life bidirectional cable features metal terminals, nickel-plated connectors and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Double shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: 2x USB-C (M) male.  Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and charging of the connected device. USB 480Mbps (USB 2.0), compatible with USB 1.1.  Supports 480 / 12 / 1.5 Mb/s transmission rates. Supported charging technologies: Power Delivery 2.0/3.0/3.1 - 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, PPS, Samsung Adaptive Fast Charging and Super Fast Charging, Huawei Fast Charge Protocol, Apple Fast Charging, SMART Charging and others. Support Extended Power Range (EPR) specification up to 240W and Standard Power Range (SPR) specification up to 100W. Support for fast charging with a current of up to 5A. Integrated E-MARK chip. Cable includes power wires 22AWG, data wires 30AWG.  Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for computers, laptops, mobile phones, tablets, power banks, power tools and other devices with USB-C connector. Other data:  cable length 3 m, 4.6 mm outer diameter of the cable. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.

The multi-port USB-C 5Gbps AXAGON HMC-H3A STARTER 4in1 hub expands your laptop, computer or phone with four ports. Connect your laptop to the hub via a 15 cm long USB-C cable. You immediately have connectors to connect a monitor and three USB devices at the same time. The USB hub offers three USB outputs, two with USB-A 480Mbps and the third with USB-A 5Gbps. Transfer rate is up to 5Gb/s thanks to USB 3.2 Gen 1 interface. The hub can also handle permanent connection of several external drives simultaneously. The HDMI output enables the connection of an external monitor, TV or projector with a resolution of up to 4K/30Hz Ultra HD, 2K/60Hz Quad HD or 1080p/120Hz Full HD and the transmission of multi-channel audio. The compact and slim aluminium body not only looks great, but also provides mechanical durability and passive cooling. You will also be pleased with the finely textured surface, which does not leave fingerprints. USB-C hub is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running.  For the hub to function properly, your laptop's USB-C port must support video output (DisplayPort Alternate Mode or Thunderbolt 3, 4 and above). The hub can easily connect to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input (computer, tablet or phone connection): USB 5Gbps (USB 3.2 Gen 1 / USB 3.0), USB-C male connector. Compatible with USB 10Gbps, USB4, Thunderbolt 3/4. USB outputs: 2x USB 480Mbps port, USB-A female connector. 1x USB 5Gbps port, USB-A female connector. USB-C hub can handle the connection of several external drives at the same time. Video outputs: 1x HDMI port, HDMI A female connector. Maximum supported resolution: 1 monitor - up to 4K/30Hz Ultra HD, 2K/60Hz Quad HD, 1080p/120Hz Full HD.  Video features: For Apple devices running macOS, the maximum refresh rate is usually limited to 60Hz. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. A suitable updated OS and up-to-date graphics drivers are also required. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Up to 8-channel LPCM audio, compressed audio (AC-3, DTC) and HBR audio format support. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support.  Standby mode support. Power supply via USB bus (USB bus power). The blue LED indicates with constant light the hub connection to the computer. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 11 x 95 x 26 mm (H x W x D). Weight 34 g (incl. cable). USB-C cable 15 cm long for connecting the hub to a laptop. Supported operating systems: Windows 10 / 11, macOS, iPadOS, iOS, Linux, Chrome OS and Android.  Compatibility depends on the operating system and device manufacturer support. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, tablet, phone). Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 15 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / EST / FIN / FR / GR / HR / HU / IT / LT / LV / NL / NOR / PL / PT / RO / SK / SLO / SRB / SWE / TR / UA / ALB / BG

The Mini DisplayPort to HDMI adapter from LogiLink allows the operation of HDMI devices on the Mini DisplayPort with audio support of your laptop or PC's. Suitable for the operation of HDMI devices like projectors, TFT, Plasma or LCD TV with a Macbook or Macbook Pro from Apple.