Auto Monitori

SmallRig Camera Battery Charger guarantees full compatibility with batteries and is capable of charging both original and third-party batteries. The charger’s dual-slot design allows for simultaneous charging of two batteries or single-battery charging, fully charging two batteries in approximately 2 hours for optimal efficiency.  Intelligent circuitry offers multiple safety protections, including over-temperature and over-voltage safeguards. It monitors temperature and voltage, automatically slowing down charging during overheating, cutting off power in case of overvoltage, and employing trickle charging near full capacity to preserve battery health. Each charging channel features five LED indicators that display power levels in 20% increments, even without external power. A red warning light activates when battery levels are critically low. Additionally, the charger incorporates a universal USB-C input port and comes with a fast-charging cable, making it compatible with wall adapters, car chargers, and power banks for versatile charging options. Buttons & Indicator LightsButtons / Indicator Lights FunctionPower Display Button Press to check battery levelBattery Indicator Idle Mode (Battery level display when not charging)0-10%: 1 red LED (steady)10-20%: 1 white LED20-40%: 2 white LEDs40-60%: 3 white LEDs60-80%: 4 white LEDs80-100%: 5 white LEDsCharging Mode White LEDs flash to show current charge level; steady white LEDs indicate fully charged levelError Mode First LED of both channels flash red and white alternately if overheated (auto-resumes when temperature returns to safe range) Camera Battery Charger x 160W USB-C to USB-C Cable (1m / 3.3ft) x 1 Material(s) PC + ABSUSB-C Input 5V / 2.4A, 9V / 2A, 12V / 1.75A, 15V / 1.5A; 22.5W (Max)USB-C Protocol PD3.0, QC2.0, QC3.0Rated Output (Per Channel) 8.4V / 1AOperating Temperature 0°C to 45°C / 32°F to 113°F Product Dimensions: 88.9 x 69.2 x 26.0mm / 3.5 x 2.7 x 1.0inPackage Dimensions: 120.0 x 102.5 x 43.0mm / 4.7 x 4.0 x 1.7inProduct Weight:55g±5g / 2oz±0.2ozPackage Weight:130g±10g / 4.6oz±0.4oz

SmallRig Camera Battery Charger guarantees full compatibility with batteries and is capable of charging both original and third-party batteries. The charger’s dual-slot design allows for simultaneous charging of two batteries or single-battery charging, fully charging two batteries in approximately 2 hours for optimal efficiency.  Intelligent circuitry offers multiple safety protections, including over-temperature and over-voltage safeguards. It monitors temperature and voltage, automatically slowing down charging during overheating, cutting off power in case of overvoltage, and employing trickle charging near full capacity to preserve battery health. Each charging channel features five LED indicators that display power levels in 20% increments, even without external power. A red warning light activates when battery levels are critically low. Additionally, the charger incorporates a universal USB-C input port and comes with a fast-charging cable, making it compatible with wall adapters, car chargers, and power banks for versatile charging options. Buttons & Indicator LightsButtons / Indicator Lights FunctionPower Display Button Press to check battery levelBattery Indicator Idle Mode (Battery level display when not charging)0-10%: 1 red LED (steady)10-20%: 1 white LED20-40%: 2 white LEDs40-60%: 3 white LEDs60-80%: 4 white LEDs80-100%: 5 white LEDsCharging Mode White LEDs flash to show current charge level; steady white LEDs indicate fully charged levelError Mode First LED of both channels flash red and white alternately if overheated (auto-resumes when temperature returns to safe range) Camera Battery Charger x 160W USB-C to USB-C Cable (1m / 3.3ft) x 1 Material(s) PC + ABSUSB-C Input 5V / 2.4A, 9V / 2A, 12V / 1.75A, 15V / 1.5A; 22.5W (Max)USB-C Protocol PD3.0, QC2.0, QC3.0Rated Output (Per Channel) 8.4V / 1AOperating Temperature 0°C to 45°C / 32°F to 113°F Product Dimensions: 89.1 x 68.3 x 23.9mm / 3.5 x 2.7 x 0.9inPackage Dimensions: 120.0 x 102.5 x 43.0mm / 4.7 x 4.0 x 1.7inProduct Weight:47g±5g / 1.7oz±0.2ozPackage Weight:123g±10g / 4.3oz±0.4oz

This cable enables high-quality video and audio conversion from USB-C to HDMI connector for monitor/TV/projector. It works as an external video card with HDMI output. Allows you to expand your existing desktop to two monitors or mirror it to another monitor. It also allows you to work on two different screens simultaneously. Make your working day more fun and comfortable, work on two screens simultaneously. - Video resolution is up to 8K@60Hz,4K@144Hz, FULL HD 1080p - USB-C (DP 1.4) to HDMI 2.1 - Support both audio and video output. - It can work on new Macbooks, Chromebooks, Asus Zen AIO and other 2015 Type-C equipped devices. - Compatible for Mac, Windows, tablets, mobile devices (Samsung S8, Note 8, LG G5, etc.) - Type C reversible connectors. - 1 x USB Type-C™ male > 1 x HDMI-A 19-pin male - Signal direction: USB Type-C™ input > HDMI output - Resolution:8K@60Hz (7680*4320), 4K@144Hz (3840*2160), 2K@165Hz/240Hz - Bitrate: 48Gbps - Supports 3D display, HDR, HDCP 1.4 and 2.2 - Quick Media Switching(QMS), Auto Low Latency Mode(ALLM), Quick Frame Transport(QFT) - Audio: 1536kHz audio sample - Chipset: VMM7100 - USB bus power supply, no external power supply needed - Plug & Play, support in-service replacement - Metallic grey housing, gold plated connectors - Pleasantly soft cable with cotton braid - Silver grey cable and braid colour - Length: 2m. - Works with new devices with USB-C supporting DisplayPort Alternate modes Macbook Chromebook Asus Zen AIO Mac,Windows,Tablets,Mobile(Samsung S8/S8 plus, Note 8, LG G5, Mate10, LG V300, HTC U Ultra ) etc....

USB One: Quick Share Simple and efficient connection LG One:Quick Share is a wireless screen sharing solution available with LG webOS Signage devices. It is a USB to computer data transfer module (SC-00DA) and application. With One:Quick Share, users can easily share their computer screen to the LG monitor and can manage the basic functions of the LG Signage device. Easy pairing USB attachments can be connected to LG Signage displays to automatically pair the devices, which can then be easily disconnected. Once connected, the devices are ready for pairing. Plug and Play Easily share your computer screen on the LG Signage screen by plugging the USB Attachment into your PC and pairing the devices. One-click wireless screen sharing With the press of a button on the USB Set Top Box, you can share your PC screen, switch to another screen or show up to 4 screens on your Signage device at once. Built-in Wi-Fi With LG Signage's SoftAP feature, the USB Appliance and Signage screens can be easily connected without the need for an additional transmitter. Remote-free settings Use the One:Quick Share PC app to adjust default Signage screen settings (volume, picture mode, auto brightness adjustment, etc.) without a remote control, and edit schedules and notes or Office Meeting presentation settings. Screen Manager Shared screens on the Signage screen can be managed by a meeting organiser with administrator privileges. He or she can rearrange shared screens, disable selected screens and choose from a number of linked screens.

UNI-T UT118B digital multimeterUNI-T UT118B is a small but very practical digital multimeter that is ideal for quick measurements in electrical installations. Its slim design and intuitive operation make it a convenient tool for both professionals and those doing minor repairs at home.Comprehensive measurementsThe UT118B multimeter can measure direct current (DC) and alternating current (AC) voltages up to 300 V, which is sufficient for most basic service and installation tasks. With the ability to measure resistance up to 30 MΩ, you can easily check the condition of wires, fuses or soldered connections. Capacitance measurement up to 3 mF also allows quick verification of capacitors, which is sometimes useful for diagnosing power supplies or electronic circuits.Automatic parameter recognitionOne of the main advantages of the UT118B is its Auto function, which automatically recognizes the parameter being measured without having to manually switch ranges. This makes the device very easy to use and ideal for quick measurements in restricted areas or when working with one hand. In addition, the multimeter is equipped with a non-contact voltage detection (EF) function, which increases work safety.Easy-to-read display and practical measurement functionsThe UT118B offers an easy-to-read 28 × 14 mm LCD screen that makes it easy to read results even in low-light conditions. The "data hold" function allows you to hold the reading on the screen, and MAX/MIN modes allow you to monitor values in real time. In addition, the device automatically shuts off after about 10 minutes of inactivity to prevent unnecessary battery drain. A built-in low battery indicator reminds you when the battery needs to be replaced.Design ready to work in any conditionsWith its small size (20 mm × 27 mm × 182 mm) and weight of just 90 g, the UT118B will fit in a shirt pocket, tool bag or even a desk organizer. It is powered by a CR2032 battery, which lasts for many hours of use. It comes with basic accessories: a battery and a measuring cable - everything you need to get started right away.Included multimeter battery measuring cable Manufacturer UNI-T Model UT118B DC voltage measurement range Scan/Auto mode: 300 V ±1%+3 AC voltage measurement range Scan/Auto mode: 300 V ±1%+3 Resistance Scan mode: 3MΩ; Auto mode: 30MΩ ±(1%+3) Capacitance Scan mode: 300μF; Auto mode: 3mF ±(3%+5) Auto range Yes EF function Yes Diode Yes Automatic switch off after approx. 10 min Sound signal of continuity Yes Low battery indicator Yes Data storage Yes Max/Min Yes LCD backlighting Yes DCV input impedance ≥10MΩ Power supply 3V battery (CR2032) Display size 28 x 14 mm Weight 90 g Dimensions 20 x 27 x 182 mm

Zeblaze Btalk Pro Smartwatch (silver)The Zeblaze Btalk Pro is a stylish smartwatch featuring a large 1.91" display, Bluetooth calling, advanced health tracking, and a battery that lasts up to 21 days in power-saving mode. With a slim design just 10.9 mm thick, screen brightness of up to 600 nits, and a screen-to-body ratio of 75.8%, the device has a modern look and provides convenient access to essential information throughout the day. Additionally, the Zeblaze Connect app makes it easy to analyze health and fitness data, download watch faces, and much more.Large Screen and Slim DesignThe 1.91" TFT display offers natural colors and a large viewing area, making it very convenient to read notifications, workout results, and health data. Brightness of up to 600 nits improves screen readability and ensures a clear image even in bright sunlight, while Always-On Display (AOD) allows you to view the most important information at all times. In addition, the slim case measuring 48.5 × 39.5 × 10.9 mm and the stylish design with 2.5D tempered glass give the watch a modern look that complements both athletic and everyday styles.Bluetooth Calls, Notifications, and MoreThanks to its built-in microphone and speaker, the smartwatch allows you to make phone calls directly. Features include dialing, contacts, call history, and a voice assistant. Additionally, the watch supports notifications for messages and app events, allowing you to stay connected without having to constantly reach for your phone.Health monitoring around the clockThe Zeblaze Btalk Pro uses the OHR Fusion biometric sensor to monitor key physiological parameters. The smartwatch measures heart rate from the wrist, tracks SpO2 blood oxygen levels, analyzes sleep quality, and tracks calories burned. It also offers breathing exercises and women’s health tracking. All of this helps you better understand your daily activity and recovery, and makes it easier to spot any concerning symptoms.Daily activity and trainingThe smartwatch supports physical activity tracking and records, among other things, the number of steps, calories burned, pace, and distance covered. You can also choose from a wide variety of sport modes, such as running or jumping rope. The watch will also remind you to get moving. An interesting feature is Auto Goal, which analyzes your activity level and sets a daily step goal based on that.Over 300 watch faces and extensive customization optionsYou can customize the watch to match your personal style thanks to the extensive library of watch faces available in the app. You have access to 6 system watch faces and over 300 ready-to-download watch faces. The watch also supports creating your own designs, allowing you to use your favorite photos to create a completely personalized screen layout.Practical features for everyday useThe Zeblaze Btalk Pro offers a set of tools useful for everyday use. Among the available features, you’ll find a weather forecast, calendar, calculator, alarm clock, timer, stopwatch, Do Not Disturb mode, hydration reminders, and the option to locate your phone and watch. Additionally, the smartwatch lets you control your smartphone’s music and camera right from your wrist.Long Battery Life and Fast ChargingThe 300 mAh battery ensures long battery life without the need for frequent charging. In power-saving mode, the smartwatch can last up to 21 days; during typical use, up to 14 days; and with heavy use, up to 7 days. It also supports continuous voice calls for up to 285 minutes. A full charge takes about 1.5 hours, so the device is quickly back to full readiness.Zeblaze Connect appThe Zeblaze Connect app lets you conveniently manage the watch’s settings, analyze health and fitness data, and download additional watch faces. It is compatible with devices running Android 6.0 and iOS 13.0 (or later), so it works seamlessly with most modern smartphones.Included in the Box Smartwatch (with standard strap) Magnetic charging cable (without USB-C cable)

Zeblaze Btalk Pro Smartwatch (black)The Zeblaze Btalk Pro is a stylish smartwatch featuring a large 1.91" display, Bluetooth calling, advanced health tracking, and a battery that lasts up to 21 days in power-saving mode. With a slim design just 10.9 mm thick, screen brightness up to 600 nits, and a screen-to-body ratio of 75.8%, the device has a modern look and provides convenient access to essential information throughout the day. Additionally, the Zeblaze Connect app makes it easy to analyze health and fitness data, download watch faces, and much more.Large Screen and Slim DesignThe 1.91" TFT display offers natural colors and a large viewing area, making it very convenient to read notifications, workout results, and health data. Brightness of up to 600 nits improves screen readability and ensures a clear image even in bright sunlight, while Always-On Display (AOD) allows you to view the most important information at all times. In addition, the slim case measuring 48.5 × 39.5 × 10.9 mm and the stylish design with 2.5D tempered glass give the watch a modern look that complements both athletic and everyday styles.Bluetooth Calls, Notifications, and MoreThanks to its built-in microphone and speaker, the smartwatch allows you to make phone calls directly. Features include dialing, contacts, call history, and a voice assistant. Additionally, the watch supports notifications for messages and app events, allowing you to stay connected without having to constantly reach for your phone.Health monitoring around the clockThe Zeblaze Btalk Pro uses the OHR Fusion biometric sensor to monitor key physiological parameters. The smartwatch measures heart rate from the wrist, tracks SpO2 blood oxygen levels, analyzes sleep quality, and tracks calories burned. It also offers breathing exercises and women’s health tracking. All of this helps you better understand your daily activity and recovery, and makes it easier to spot any concerning symptoms.Daily activity and trainingThe smartwatch supports physical activity tracking and records, among other things, the number of steps, calories burned, pace, and distance covered. You can also choose from a wide variety of sport modes, such as running or jumping rope. The watch will also remind you to get moving. An interesting feature is Auto Goal, which analyzes your activity level and sets a daily step goal based on that.Over 300 watch faces and extensive customization optionsYou can customize the watch to match your personal style thanks to the extensive library of watch faces available in the app. You have access to 6 system watch faces and over 300 ready-to-download watch faces. The watch also supports creating your own designs, allowing you to use your favorite photos to create a completely personalized screen layout.Practical features for everyday useThe Zeblaze Btalk Pro offers a set of tools useful for everyday use. Among the available features, you’ll find a weather forecast, calendar, calculator, alarm clock, timer, stopwatch, Do Not Disturb mode, hydration reminders, and the option to locate your phone and watch. Additionally, the smartwatch lets you control your smartphone’s music and camera right from your wrist.Long Battery Life and Fast ChargingThe 300 mAh battery ensures long battery life without the need for frequent charging. In power-saving mode, the smartwatch can last up to 21 days; during typical use, up to 14 days; and with heavy use, up to 7 days. It also supports continuous voice calls for up to 285 minutes. A full charge takes about 1.5 hours, allowing the device to quickly return to full readiness.Zeblaze Connect appThe Zeblaze Connect app lets you conveniently manage the watch’s settings, analyze health and fitness data, and download additional watch faces. It is compatible with devices running Android 6.0 and iOS 13.0 (or later), so it works seamlessly with most modern smartphones.Included in the box Smartwatch (with standard strap) Magnetic charging cable (without USB-C cab

Grownsy B12H multifunctional baby scaleGrownsy B12H is a multifunctional scale designed for long-term monitoring of your child's development, but also for everyday use by the whole family. Thanks to its wide measuring range and removable platform, it works well as a baby scale, children's scale, pet scale, and classic bathroom scale for adults.Precise measurements even with a restless childThe use of four high-precision sensors in combination with the Hold/Auto Hold function allows you to obtain a stable and reliable result even when your child is moving. The scale automatically stops and displays the correct measurement, which significantly facilitates everyday use and reduces stress during weighing.Five measurement units – complete freedom of readingThe device supports five measurement units, such as lb:oz, lb, oz, kg, and g. This allows you to easily customize the display of results to suit your needs, your doctor's recommendations, or your child's growth records.Weight and height measurement in one deviceThe integrated 27-inch (approx. 68.58 cm) measuring platform allows you to conveniently measure your baby's height without the need for additional accessories. This is a practical solution for parents who want to regularly and conveniently monitor their child's development at home.Stable construction and safe useThe non-slip surface and well-thought-out platform design ensure stability when weighing babies, children, and pets. The large, easy-to-read touchscreen display makes it easy to use and quickly read the results. The auto-off function helps save energy, and the removable platform design makes it easy to store the device after measurement.Functionality that grows with your familyWith a measuring range of up to approx. 150 kg, the Grownsy B12H does not lose its usefulness as your child grows older. It is a single device that successfully replaces several scales, saving space and money. Manufacturer Grownsy Model B12H Measuring range from 30 g to approx. 150 kg Accuracy (measuring increment) 5 g Units of measurement lb:oz, lb, oz, kg, g Product dimensions 700 × 340 × 58 mm Product weight 1.8 kg Power supply 3 × 1.5 V AAA batteries Materials ABS + silicone + electronic components Sensors 4 high-precision sensors Auto Hold function yes Display touchscreen Measuring tape 27 inches (approx. 68.58 cm)

GOOLOO A6 Gear Air CompressorThe GOOLOO A6 Gear Air Compressor is a compact, cordless device for inflating tires and accessories that combines solid performance with portability. It offers a pressure range of 4–160 PSI, an accuracy of ±2 PSI, and fast inflation—it takes less than a minute to inflate a tire (205/55R16) from 30 to 36 PSI. The built-in 27.75 Wh (7500 mAh) battery allows you to inflate up to 8 car tires, 19 motorcycle tires, 22 bicycle tires, or even 107 balls on a single charge. The device charges via USB-C (5V/2A) in approximately 220 minutes, operates at a noise level below 85 dB, and features a compact design.Precision and Pressure ControlThe easy-to-read display shows current values in real time, allowing you to precisely control the inflation process. Accuracy of ±2 PSI ensures better alignment with the manufacturer’s pressure recommendations, which improves ride comfort and slows tire wear. The auto-shutoff feature stops operation once the set level is reached, so you don’t have to monitor the device.Pre-set modes simplify operationThe compressor is equipped with practical presets tailored to various applications: car, motorcycle, bicycle, ball, and manual mode. This eliminates the need to set parameters from scratch each time—selecting the appropriate mode reduces setup time and minimizes the risk of error.Performance that makes a differenceHigh battery capacity directly translates to real-world capabilities. A single charge is enough to service several vehicles or many small accessories, making the device ideal for both daily use and longer trips. A fill time of less than 1 minute for a standard tire means shorter downtime and greater convenience.Extra support on the roadThe built-in LED flashlight with standard, SOS, and strobe modes enhances safety after dark. It’s a practical solution in emergencies when an additional light source or warning signal is needed.Included GOOLOO A6 Gear Compressor Inflation hose Set of valve adapters (5 pieces) USB-C charging cable User manual Manufacturer GOOLOO Model A6 Gear Pressure range 4–160 PSI Measurement accuracy ±2 PSI Battery capacity 27.75 Wh (7500 mAh) Noise level < 85 dB (at 1 m) Input 5V⎓2A Charging port USB-C Charging time approx. 220 minutes

Uni-T UT333BT Mini Temperature and Humidity MeterThe Uni-T UT333BT Mini Temperature and Humidity Meter is a compact and lightweight device for everyday measurements ranging from -10°C to 60°C and 0–100%RH. It displays results on an easy-to-read LCD screen and allows for analysis in the iENV mobile app via Bluetooth connectivity. With an accuracy of ±1°C and ±5%RH and fast sampling (1 measurement per second), the device is ideal for use both at home and at work. Its ergonomic design, MAX/MIN functions, backlight, and automatic shut-off after 5 minutes make it easy to use and help conserve energy.Precise measurements and clear readingsThe meter records temperature and humidity with high accuracy, allowing you to monitor conditions in a room or warehouse and respond to changes. The clear 32 × 26 mm LCD screen improves the visibility of results, making it easy to use even in low light.Bluetooth connectivity and convenient data analysisThe UT333BT version allows data to be transferred to the iENV app, enabling you to save, analyze, and export it. This makes it easier to monitor changes over time and create measurement records without manual note-taking. Its compact size and light weight (102 g) mean you can always keep the device close at hand. Features such as maximum and minimum value recording, a low battery indicator, and automatic shut-off enhance user comfort and reduce energy consumption.Included Uni-T UT333BT Temperature and Humidity Meter Batteries (3 × R03) User manual Blister packaging Manufacturer Uni-T Model UT333BT Temperature measurement range -10°C ~ 60°C Temperature accuracy ±1.0°C Temperature resolution 0.1°C Humidity measurement range 0%RH ~ 100%RH Humidity Accuracy ±5%RH Humidity Resolution 0.1%RH Sampling Rate 1 measurement/s Connectivity Bluetooth Display 32 mm × 26 mm LCD Functions MAX/MIN, Data Hold, Backlight, °C/°F Selection Auto power off after 5 minutes Low battery indicator 3V ~ 3.5V Power supply 3 × 1.5V battery (R03) Dimensions 155 × 50 × 28 mm Weight 102 g

FNIRSI FDM-02 Sound Level MeterThe FNIRSI FDM-02 is a precision sound level meter equipped with a color display and a high-quality condenser microphone, enabling accurate measurement of noise levels in various work environments. It supports A/C frequency weighting, FAST/SLOW modes, and a data logging function that generates graphs. Additionally, it allows you to monitor ambient temperature and humidity. All of this makes the device ideal for professional acoustic measurements, monitoring working conditions, and more.Precise noise measurementThe device uses a condenser microphone, which ensures high sensitivity and measurement stability. The FDM-02 model provides accurate real-time sound level readings, allowing for effective monitoring of noise levels in rooms, workplaces, or public spaces. The easy-to-read display presents current measurement values clearly, facilitating quick analysis of results. Additionally, the meter supports two frequency weighting modes—A and C—allowing you to adjust the measurement method to the type of noise being analyzed. You can also use the FAST and SLOW modes, which enable faster or more stable measurement sampling depending on operating conditions.Temperature and Humidity MeasurementThe device not only allows you to check sound levels but also to monitor ambient temperature and humidity. This feature enhances the meter’s functionality and makes it easier to control environmental conditions while performing acoustic measurements.Color screen and user-friendly operationThe color display provides a clear image and allows for easy reading of parameters. Additionally, the ergonomic button layout allows you to quickly switch between operating modes and change settings, improving user comfort during both field work and indoor measurements. The FNIRSI FDM-02 also offers a data logging function and a Curve Recording mode, which allows you to visualize changes in sound levels in the form of graphs. This makes it easier to analyze noise fluctuations over a specific period and compare results without the need for manual note-taking.Included Sound level meter USB cable Carrying case Manufacturer FNIRSI Model FDM-02 Display 2.0" color TFT screen Result display 4-digit, resolution 0.1 dB Frequency weighting characteristics A and C Available modes FAST (approx. 125 ms), SLOW (approx. 1 s) Frequency range 31.5 Hz – 8.5 kHz Dynamic range / value update FAST: 0.5 times per secondSLOW: 1 time per second Dynamic range 3.50 dB Accuracy ±1.5 dB (standard sound source, 94 dB @ 1 kHz) Measurement range 30 dB – 130 dB Alarm log 30 entries, recording time and type of high and low thresholds Brightness adjustment From 5% to 100%, 5% adjustment step Graph interface Updated every 0.5 s Overload indicator Exceeding or falling below the measurement range Threshold settings Minimum: 0.0 dBMaximum: 130.0 dB Supported languages Chinese / English Interface mode Style switching (day / night) Date and time settings Year, month, day, hour Hibernation settings Adjustable sleep mode brightness and adjustable hibernation time Auto-off Yes, adjustable time from 1 to 60 minutes Battery Lithium 1500 mAh / 3.7 V Battery indicator Yes Data hold Yes Power indicator Yes Noise level indicator Yes Dimensions 183 × 63 × 28 mm

IMOU Ranger 2C Pro 5MP Indoor IP CameraThe IMOU Ranger 2C Pro 5MP indoor camera provides detailed 5MP (2880 × 1620) video and a wide field of view of 88° (H), 47° (V), and 107° (D), allowing it to cover a large area without losing detail. The 0–355° pan and -5–80° tilt mechanism allows you to closely monitor every corner of the room, while the auto-patrol feature further extends the surveillance range. The camera uses H.265 compression, which reduces bandwidth and storage consumption by up to 50% compared to H.264, while maintaining the same image quality. Its compact design makes it easy to fit into any interior.Image Control and Smooth StreamingThe use of a 1/3” Progressive CMOS sensor and a 3.6 mm lens ensures a clear image and natural detail reproduction. The camera supports up to 20 frames per second and 8x digital zoom, making it easy to zoom in on important parts of the recording. Thanks to dual-band Wi-Fi 6 (2.4 GHz / 5 GHz) and an Ethernet port, you can count on a stable and fast connection regardless of network conditions. Remote access via the Imou app (iOS, Android) allows for live viewing and camera management from anywhere.Smart detection and precise alertsAdvanced AI algorithms detect people and animals, reducing the number of false alarms so you only receive relevant notifications. The camera also recognizes unusual sounds, such as a baby crying, and immediately sends an alert to your smartphone. Additionally, you can define detection zones and use motion monitoring to further tailor the device’s performance to your needs.Smart tracking and full coverageThe Smart Tracking feature automatically detects motion and follows a moving object, keeping it in the frame. Auto Cruise allows for automatic 360° scanning of the space or switching between saved observation points. Thanks to this, the camera not only records events but actively monitors the surroundings, increasing the level of security at home or in the office.Advanced full-color night visionSmart Full-Color Night Vision offers four operating modes—Infrared, Color (using two built-in spotlights), Smart, and Off. The camera automatically switches between modes, ensuring a clear image even in total darkness at a distance of up to 10 m. This ensures that nighttime recordings are just as useful as those recorded during the day.Two-way communication and active deterrenceThe built-in microphone and speaker enable full-duplex conversations, allowing for natural communication without interference. The One-touch Call feature enables quick video calls with the app using a single button on the camera, and Call Kit (iOS) support simplifies handling call notifications. The camera also offers active deterrence—the built-in siren activates upon detecting an intruder, and the ability to set your own voice message enhances effectiveness.Privacy and Convenient ManagementPrivacy Mask mode lets you cover the lens with a single click in the app when you’re at home and don’t want to be recorded. The camera also supports Always On Recording (AOR), which records at full frame rate during events and limits recording to 1 fps outside of them, saving space on the card.Flexible recording optionsYou can store recordings on a microSD card (up to 512 GB), in the cloud, or on an NVR. The camera supports 24/7 continuous recording, and thanks to efficient H.265 compression, it can store up to 16 days of footage on a 512 GB card. The cloud service offers access to recordings from anywhere and a trial period for new devices.Included: Camera Power adapter Power cable Pack of mounting screws Mounting plate Mounting template Quick start guide General Manufacturer IMOU Model IPC-S2CP-5R1S Power supply DC 5V 1A Power consumption < 5 W Operating conditions -10°C to +45°C, humidity < 95% RH Dimensions (L × W × H) 77.4 × 77.4 × 106.2 mm Weight 197 g (0.43 lb) Certifications CE Camera Sensor 1/3” Progressive CMOS Resolution 5 MP (2880 × 1620) Night vision range 10 m (33 ft) Lens 3.6 mm fixed focal lengt

Sonoff CAM Outdoor (CAM-B1P) AI bullet security camera, for home and business protection. Features 2K resolution, two-way audio, full-color night vision, and remote access via Wi-Fi using the eWeLink app.  SONOFF smart home system allows you to control your electrical appliances remotely with the EWeLink app or by voice with Amazon Alexa or Google Home. It allows you to create different scenarios, group appliances by switching on/off multiple devices with a single touch, set timers and schedules, monitor the status of your devices in real time, and share their control. By linking the eWeLink app with the IFTTT automation platform, you can further expand automation possibilities.  Features:  IP65-rated outdoor security camera featuring 2K resolution, 180° rotation, AI human detection, Smart tracking, and Full-color night vision, designed to provide reliable protection for homes and business premises. 180° rotating ultra-wide view reduces blind spots, and provides more comprehensive monitoring. The 2K HD resolution captures finer details and delivers sharp, high-quality video. AI-powered human detection accurately identifies people and tracks their movement in real time, reducing false alarms and improving responsiveness to potential intruders. Preset point setting allows you to save and instantly switch between predefined camera viewpoints, providing quick access to the most important monitoring zones. CAM-B1P supports multiple night vision modes, including Full-Color, Infrared (black and white), and Smart Night Vision, ensuring clear visibility in different lighting conditions. The camera can be controlled via the eWeLink app (Android and iOS), allowing users to view live video, receive motion alerts, create automation scenes, and integrate the camera with other SONOFF smart home devices. Supports integration with Home Assistant and Scrypted, enabling advanced automation and smart home control. The IP65-rated waterproof and dustproof design ensures reliable operation in outdoor environments. Data storage: supports microSD (TF) cards up to 128GB capacity (memory card is sold separately). Compatible with other SONOFF devices (switches, sensors, smart bulbs, etc.) and various products that can enhance smart home automation scenarios. Package contents: camera with power cable, mounting bracket, and mounting screw kit.  Technical specifications:  Compatibility: SONOFF NSPanel Pro, SNZB-04P, DW2-WIFI, SNZB-01P, and other. Lens: F1.6. Viewing angle: 108° (H). Resolution: 2K. Video compression: H.264. Network: Wi-Fi, 2.4GHz. Network protocols: IEEE 802.11b/g/n. MicroSD card slot (supports cards up to 128GB). Built-in microphone and speaker. Rotation: 180° (H). App: eWeLink (Android, iOS). Works with Amazon Alexa & Google Assistant. AI functions: human detection, smart tracking. Two-way audio. Motion detection. Reset button. Night vision: full-color. Auto tracking: yes. Power supply: DC 5V / 2A. Power interface: USB Type-A. Operating temperature: -20°C ~ +50°C. Operating humidity: 5-95% RH (non-condensing). Protection rating: IP65. Housing material: ABS, PC plastic. Installation: wall-mounted, pole-mounted, or under an eave/canopy. Dimensions: 61x91x161 mm. Weight: 282.7g. Color: white.  Warranty: 24 months.

The multi-port USB-C 5Gbps hub AXAGON HMC-5HL expands your laptop with five ports. You can easily and quickly connect a monitor, two USB devices and a Gigabit Ethernet network to the computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology. The USB-C hub will provide you with a universal and powerful 5in1 docking station for modern laptops. The USB hub offers two USB outputs with standard USB-A connectors. The hub can also handle permanent connection of several external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. The hub will also enable charging of phones and tablets with a current of up to 1.5A/5V, so you can easily charge e.g. Android smartphone, Apple iPhone, Apple iPad etc.  The USB-C connector is reserved only for powering and simultaneous charging of laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect the USB-C Power Delivery charger to the hub and connect the hub to the laptop. This saves one USB-C port. The condition is a laptop with Power Delivery charging support from the USB-C port and a suitable PD charger. HDMI video output provides high-quality images up to 4K/60Hz Ultra HD resolution.  High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3/4 port is necessary for the proper function of video output. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card.  The aluminum cover ensures mechanical durability and cooling of the USB hub. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running.  Input: USB 5Gbps (USB 3.2 Gen 1 / USB 3.0). Compatible with Thunderbolt 3/4. Connection via reversible USB type C female connector. USB outputs: 2x USB 5Gbps port, USB-A female connector.  1x Power Delivery port (power only), USB-C female connector.  USB-C hub can handle the connection up to two external drives simultaneously.  Charging of mobile devices (including iPad) with a current of up to 1.5A from the hub's USB-A ports. Video output: 1x HDMI A port, HDMI A female connector.  4K resolution 4096 x 2160 at up to 60Hz.  2K / WQHD resolution 2560 x 1440 at up to 120Hz.  FHD resolution 1920 x 1080 at up to 240Hz. Support for the above max. supported resolutions and frequencies requires connection to a computer with DisplayPort version 1.4.  For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10 bit support) - realistic reproduction of light and dark details.HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Support for 2-channel audio sampling rate up to 192 kHz and up to 24-bit audio - depends on source and end device, i.e. laptop/phone and TV/monitor/AV receiver. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mb/s auto-detection. Wake-on-LAN support. Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub. Maximum power supply pow