BLE Bluetooth

Bluetooth version: 5.0 + EDR, BLE Wireless distance: 10m Sound Type: True Wireless Stereo Supported profiles: HSP, HFP, A2DP, AVRCP ENC technology: Yes, 4 microphone call technology Supported audio codecs: SBC, AAC Speaker size: 6.0mm Frequency response: 20Hz - 20KHz Resistance: 16Ω Sensitivity: 103dB (3dB) @ 1 KHz, 126mV Nominal power: 3mW Microphone type: 4 x MEMS Sensitivity: 42dB ± 3dB SNR: 60dB THD: Less than 1% 94dB SPL @ 1kHz Resistance: 200Ω Sweat and water resistant: IPX4 Features: Voice commands, Wear detection, Tap control, Smart switch, Auto connection Music playing time: up to 3.5 hours and up to 25 hours including charging case Standby time: up to 120 hours Charging time: about 2 hours Battery capacity: 500mAh / 3.7V (charging box), 30mAh / 3.7V (headphones) Charging plug: Type C Dimensions: 43 x 24.5 x 18 mm Dimensions of charging case: 72.6 x 32.6 x 28 mm Weight headphones: 5g Weight charging case: 38g Color black Package Includes: 1 x True Ambia Wireless Headphone 1 x Charging Case 1 x USB to Type-C cable 3 x set of ear tips (S, M, L) 1 x manual Operating temperature: -15°C to 45°C

Light dimmer for DALI system Shelly DALI Dimmer Gen3The Shelly DALI Dimmer Gen3 is a compact and extremely flexible device for controlling lighting brightness in DALI systems. It operates as a single-master controller that supports luminaires with DALI Part 207 (DT6) and sends broadcast messages to all devices on the bus. It also supports Wi-Fi, Bluetooth and the BLE Gateway and Wi-Fi Range Extender function. It will work perfectly in both residential and commercial spaces - and without the need for an additional hub.Built-in DALI power supply and support for 5 luminairesThe device has an integrated 10 mA DALI bus power supply, allowing it to power and control up to 5 DALI luminaires without the need for an external power module. This is a huge convenience during installation - both in new buildings and when retrofitting existing lighting installations.Precise brightness controlThe DALI Dimmer Gen3 offers advanced dimming capabilities - including minimum and maximum brightness settings, transition duration and button fade rate. With night mode, you can also set a fixed brightness level at specific times. The device also supports timers, weekly schedules and response to a DALI bus failure (turning the light on at 100%).Flexible local controlThe Shelly DALI Dimmer Gen3 works with classic wall switches and allows flexible lighting control - either with one button or two. So you can easily integrate it into your existing installation.Full integration with the Shelly ecosystem and external systemsThe dimmer integrates seamlessly with the Shelly Smart Control app, enabling remote control, scenes, schedules and local automations - even without a cloud connection. The device also supports scripting, webhooks, MQTT and local actions, giving you a lot of configuration flexibility. In addition, it supports KNXnet/IP communication, so it can be easily incorporated into advanced KNX installations. Moreover, the dimmer is compatible with popular smart home platforms such as Amazon Alexa, Google Home and SmartThings. What's more, the product belongs to the Gen3 series, featuring Shelly's proprietary ESP32-C3 chip and 8 MB of flash memory. This not only guarantees high performance, but also enables future upgrades to the Matter standard, ensuring compatibility with upcoming smart home solutions.Virtual component supportThe Shelly DALI Dimmer Gen3 supports the "virtual components" function - new to the Gen3 series. It allows you to create virtual devices in the Shelly Smart Control app and integrate third-party products into the overall Shelly ecosystem, increasing flexibility in scene creation and automation. Manufacturer Shelly Model DALIGen3 Dimensions 42 × 37 × 17 mm Weight 18 g Max. tightening torque for screw connectors 0.4 Nm Cable cross section 0.5-1.5 mm² / 20 to 16 AWG (solid, twisted and bootlace type sleeves) Length of stripped wire 5-6 mm Mounting In wall boxes, suspended ceilings Housing material Plastic Housing color Green Operating temperature range From -20°C to 40°C Working environment humidity 30-70% RH Max. installation altitude 2000 m Power supply 110-240 V AC ±10% 50/60 Hz Power consumption < 2 W Neutral wire required No Bus power supply Guaranteed 10 mA (up to 5 DALI devices), short-circuit current < 35 mA Bus voltage Nominal voltage 16 V Internal temperature sensor Yes Wi-Fi protocol 802.11 b/g/n Wi-Fi RF band 2401-2495 MHz Max. Wi-Fi signal strength < 20 dBm Wi-Fi range Up to 30 m indoors, up to 50 m outdoors (depending on conditions) Bluetooth protocol 4.2 Bluetooth RF band 2400-2483.5 MHz Max. Bluetooth signal strength < 4 dBm Bluetooth range Up to 10 m indoors, up to 30 m outdoors (depending on conditions) Processor ESP32-C3 Shelly Flash memory 8 MB Number of schedules Up to 20 Webhooks (URL shares) Up to 20 (up to 5 URLs per webhook) Scripting support Yes MQTT Yes Encryption Yes, TLS 1.2

IPS 1.38 (240x240) jutiklinis ekranas GPS – treniruotės maršruto įrašymas ir atvaizdavimas žemėlapyje programėlėje 2ATM atsparumas vandeniui 350 mAh baterija (5–7 dienų veikimo laikas įprasto naudojimo metu, iki 25 dienų budėjimo režimu) „VeryFit“ programėlė „Bluetooth 5.3 BLE“ Sveikatos stebėjimas (kraujospūdžio, pulso matavimas, oksimetras) Streso lygio stebėjimas Miego stebėjimas Sporto režimai: 100 skirtingų disciplinų Kalorijų skaičiuotuvas Žingsniamatis BT skambučiai Programėlės pranešimai GPS balso asistentas Tikslus maršruto ir rezultatų stebėjimas

Yeelight Light smart ceiling lamp C2201C300Light up rooms with warm and eye-pleasing light. The Yeelight smart ceiling lamp offers adjustable brightness, color and color temperature, and you won't have a problem installing it. What's more, its operation is facilitated by an app and voice commands. The product is also compatible with the separately available Smart Dimmer and Yeelight remote control. In addition, the lamp is distinguished by its IP54 water resistance, and its minimalist, slim design will be an elegant addition to your interior. Carefully considered designThe lamp features a minimalist and ultra-thin design, so it will fit into almost any modern interior. In addition, it offers a main, double white light that falls on the room and a colored light that casts a colorful glow on the ceiling giving a unique atmosphere in the room. It is IP54 water-resistant, so you can successfully install it in the kitchen, bathroom or even on the terrace. In addition, the airtight design prevents dust and insects from entering the lamp. On the other hand, the included base is responsible for quick and easy installation - just lock it in place. Several control optionsEnjoy the freedom of use that Yeelight offers. The C2201C300 smart lamp works with Google Assistant, Apple Homekit, Amazon Alexa and Samsung SmartThings, so you can customize the device's operation with a simple voice command. In addition, you can use the dedicated Yeelight app or remote control (not included). The lamp also supports the available Yeelight Smart Dimmer, which allows you to control the lamp remotely, even when it has been turned off via a bell switch. Gentle light for the eyesThe lamp generates a light that is warm and pleasant to the eyes, so you don't have to worry about feeling tired or uncomfortable. What's more, it's equipped with a moonlight mode that offers a low brightness level. It will be perfect for a bedroom or a child's room, enveloping the room with soft light. Works the way you want it toCustomize the lamp's operation to suit your needs. You can adjust its brightness or color temperature (2700-6500 K). What's more, the Yeelight App offers the ability to customize the color of the light - you can choose from as many as 16 million colors. To personalize the device even more, set a timer and the lamp will turn off at a time of your choosing. Included lamp mounting elements (self-tapping screw x2, wall plug x2, silicone washer x2) instruction manual Specification: Manufacturer Yeelight Model YLXDD-0033 Name Yeelight Ultra Slim Smart Ceiling Light Color temperature 2700-6500 K Brightness 1600 lm@4000K Rated voltage 220-240V~50/60 Hz Max. 0.127A Rated power 21 W Operating humidity 0-85% RH Operating temperature -20°C to 40°C Compatibility Android 4.4 (or later), iOS 9.0 (or later) Control Google Home, Apple Home, Samsung SmartThings, Amazon Alexa, Yeelight app, Smart Dimmer, Yeelight remote control Dimensions φ300 x 25 mm Waterproof IP54 Wireless connectivity Wi-Fi IEEE 802.11 b/g/n 2.4 GHz, Bluetooth 4.2 BLE Operating frequency 2412-2472 MHz (Wi-Fi), 2402-2480 MHz (BT) Maximum output power 20 dBm (Wi-Fi), 0 dBm (BT-LE) Replaceable LED light source Yes , Inteligentna lampa sufitowa Yeelight Light C2201C300Rozświetl pomieszczenia ciepłym i przyjemnym dla oka światłem. Inteligentna lampa sufitowa Yeelight oferuje regulację jasności, koloru i temperatury barwowej, a jej montaż nie sprawi Ci problemu. Co więcej, jej obsługę ułatwiają aplikacja i komendy głosowe. Produkt jest też kompatybilny z dostępnymi w ofercie oddzielnie Smart Dimmer i pilotem zdalnego sterowania Yeelight. Dodatkowo lampa wyróżnia się odpornością na wodę na poziomie IP54, a jej minimalistyczny, smukły design będzie stanowił eleganckie uzupełnienie wnętrza.Starannie przemyślana konstrukcjaLampa charakteryzuje się minimalistycznym i ultra cienkim designem, dzięki czemu będzie pasować do niemal każdego nowoczesnego wnętrza. Ponadto oferuje główne, podwójne światło białe padające na

Product in 120mm version. We recommend mounting in the panel base 6920075778151 (sold separately). Please verify the dimensions for proper installation before purchase.SONOFF NSPanel-US smart WiFi control panel (black, 120mm)SONOFF NSPanel-US is an advanced control panel that integrates HMI control, smart temperature control and smart switch functions. It allows you to centrally manage your home appliances, adjust the ambient temperature and activate selected scenes with a single touch. From lighting, air conditioners and heating, to curtains or motorized blinds, this panel takes smart home comfort to the next level.Full one-touch automationNSPanel-US is a comprehensive control system that allows you to manage multiple devices from a single screen. Smart lighting, temperature control and scenario functions are all available in an intuitive way. Set your preferred scenes for work, sleep or movie screening and activate them with the touch of a finger.Versatile control optionsNSPanel offers a variety of control options. Close distance is convenient touch control with the HMI and dual wall switch. Medium distance, that is voice control using assistants such as Alexa, Google Assistant or Alice. Long distance allows remote management via the eWeLink app, even when you are away from home.Personalized scenariosDreaming of the perfect lighting and temperature while you work or rest? NSPanel allows you to create scenarios tailored to your needs. With one click, you can switch from movie-watching mode to sleep mode, activating all your preferences in seconds.Individual and group controlThe panel allows you to control your devices individually or in groups. Turn on one light for relaxation or all of them to greet guests. NSPanel offers complete freedom to customize your home to suit your lifestyle.Smart temperature managementWith a built-in thermostat and environmental sensors, NSPanel automatically regulates the room temperature. Set your preferred conditions and forget about extreme temperature fluctuations. Manual mode allows you to adjust the temperature on the fly, while automatic mode ensures optimal conditions at different times of the day.Full control with the eWeLink app and easy-to-read displayBy working with the eWeLink app, you can monitor and control your home from anywhere in the world. Automatically turning off lights at a certain time or remotely managing appliances has never been easier. The panel displays up-to-date information on weather, Wi-Fi status, time, date, as well as indoor and outdoor temperature. All the necessary data is always at your fingertips.Compatibility with multiple devices and dual buttonsNSPanel is compatible with a wide range of SONOFF devices, including LED strips, smart bulbs, sockets and switches. Thanks to its compatibility with Philips Hue lighting, you have full control over color, color temperature and brightness. In addition to its advanced features, the panel also offers two physical buttons to control your most frequently used devices. This feature makes the NSPanel extremely practical for everyday use. Manufacturer Sonoff Model NSPanel-US Color black Power supply Input: 100-240V ~ 50/60Hz, 4A Max; Output: 100-240V ~ 50/60Hz, 2A/Gang 4A/Total WiFi connectivity IEEE 802.11 b/g/n 2.4 GHz Bluetooth connectivity 4.2 BLE Screen 3.5" TFT (capacitive touch panel) Screen resolution 480x320 px Compatible operating systems Android, iOS Construction material PC V0 + CRS + tempered glass Dimensions 120 x 74 x 41.7 mm Certifications CE / FCC / RoHS Functions Management of lighting, air conditioning, heating, curtains, motorized blinds other devices Control Remote, voice, touch Displayed data Weather, Wi-Fi status, time and date, indoor and outdoor temperature Dedicated application eWeLink Voice assistants Alexa, Google Assistant, Alice, Siri Shortcuts Compatible devices LED strips, smart bulbs, sockets, switches Additional features Philips Hue compatibility

Shelly RGBWW Pro WiFi 5-channel DIN-rail lighting controllerShelly RGBWW Pro PM is a 5-channel professional DIN-rail mounted LED lighting controller. It allows you to manage five independent light channels or multicolor RGB and CCT strips, and with precise power measurement, it allows you to monitor voltage, current and power consumption in real time. The controller offers both Wi-Fi and Bluetooth connectivity, as well as an Ethernet port for flexibility in residential and industrial installations. The device works without the need for an additional hub.Flexible control profilesThe device supports four operating profiles: RGB + CCT, CCT x2, RGB + 2x Light and Light x5. In the Light x5 profile, five outputs can be controlled independently, giving maximum configuration freedom. The RGB + CCT mode, on the other hand, allows simultaneous control of color and color temperature of light.Built-in energy measurementThe Shelly RGBWW Pro PM is equipped with the function of measuring active power, apparent power, power factor and energy (basic active and reactive). The user gains access to accurate energy consumption data for each light source, allowing better planning of consumption and increased energy efficiency.Wi-Fi, LAN and Bluetooth connectivityThe device can operate simultaneously over Wi-Fi and LAN, and can also act as a Wi-Fi signal booster or BLE gateway. It offers reliable local network communication and remote access from the Shelly Smart Control app. Configuration can also be done via the built-in web interface.High level of securityThanks to built-in protection against overheating, overvoltage and overload, the Shelly RGBWW Pro PM reacts instantly in case of dangerous conditions - it shuts down channels and sends notifications. In addition, the device's housing is made of flame-retardant plastic (class V-0), which increases the safety of the entire installation.Intelligent scenes and automationsThe controller supports up to 20 schedules, HTTP/HTTPS webhooks and advanced mjS scripts, allowing you to create complex operating scenarios. You can control light according to sunrise and sunset, set brightness transition time and brightness and color temperature limits.Precise control and easy operationShelly RGBWW Pro PM works with buttons, switches and analog potentiometers (10 kΩ). It allows night mode configuration, independent adjustment of each channel, as well as detailed settings of transitions, minimum brightness or color temperature for each output. The user also has access to event history and the ability to use the KVS data storage function.Management via the Shelly appThe Shelly RGBWW Pro PM works with the free Shelly Smart Control app, which allows you to manage the device locally and remotely. Using it, you can configure settings, control lighting, create schedules and monitor energy consumption. You'll also gain access to event history. Manufacturer Shelly Model ProRGBWWPM Dimensions Approximately 94 × 19 × 69 mm Weight 61 g Max. torque for tightening screw connectors 0.4 Nm Wire cross section 0.5 to 2.5 mm² / 20 to 14 AWG (green connector), 0.5 to 1.5 mm² / 20 to 16 AWG (blue connectors) (solid sleeves, twisted sleeves and bootlace sleeves) Length of stripped wire 6-7 mm (green connector), 5-6 mm (blue connectors) Mounting On a DIN rail Housing material Plastic Housing color Yellow Operating temperature range From -20°C to 40°C Working environment humidity 30%-70% RH Maximum installation altitude 2000 m Power supply 12-24 VDC Power consumption < 1,5 W External protection 16 A, characteristic B or C, 6 kA, energy limiting class 3 Max. switching voltage 24 VDC Max. switching current 16 A Max. control current 16 A (total), 6 A (per channel) CCT range 2700-6500K (default, configurable from 1000-10000K) Voltmeter (DC) 12-24 V ±10% Voltmeter accuracy ±5% (for 12-24 V DC) Ammeter (DC) 0-5 A ±10% Accuracy of the ammeter ±5% Power and energy meters Active and apparent power, active and apparent energy, power factor, basic

Carlinkit Tbox Basic (2+16G) Carplay/Android Wireless Adapter (black).The Carlinkit Tbox Basic Wireless Adapter (2+16G) is a compact and powerful device that allows you to easily use CarPlay and Android Auto features in your car. Equipped with Android 11.0 and Qualcomm QCM2290 ARM Cortex-A53 Quad-core processor - it ensures smooth and stable operation of essential applications.Performance and memoryThe adapter offers 2 GB of RAM and 16 GB of internal memory, allowing you to store and run various applications without lag. The Adreno 702 GPU provides high-quality graphics, ideal for displaying multimedia content, and thanks to adaptive resolution, the image is always optimally adjusted to the car's screen.Easy installation and connectivityInstallation of the device is extremely easy - just plug the adapter into the car's USB port. The product also supports 2.4G + 5G Wi-Fi and Bluetooth 4.2 BLE + 5.0 BLE, which ensures a fast and stable wireless connection. So you can easily pair it with your mobile device of choice!Compatibility and Additional FeaturesThe Carlinkit Tbox Basic is compatible with a wide range of smartphones - from iPhones 6 and above (systems from iOS 10.0) to phones running Android 11.0 and up. In addition, built-in apps such as Play Store, YouTube, Netflix, Disney+ and TikTok allow you to conveniently enjoy your favorite media content right from your car screen.Ports and extensionsThe adapter is equipped with a USB-C port and a TF card slot that allows you to expand your storage up to 256GB. This allows you to store more data and enjoy greater flexibility. What's more, the device is made of durable ABS material for long-lasting durability.Included Adapter Cable x2 User manual Manufacturer Carlinkit Model Tbox Basic (2+16G) System Android 11.0 CPU Qualcomm QCM2290 ARM Crotex-A53 Quad-core 64-bit CPU, up to 2.0 GHz 11 nm GPU Adreno 702 Memory 2 GB (RAM) + 16 GB (ROM) Wi-Fi module WCN3950E Input current 5 V ± 0.2 V 1 A Power consumption 5 W Wi-Fi frequency 802.11 a/b/g/n/ac 2.4G + 5G Bluetooth version 4.2 BLE + 5.0 BLE Built-in applications Play Store, YouTube, Netflix, Disney+, TikTok Material ABS Compatible smartphones iPhone 6 and later (iOS 10.0 and later), smartphones running Android 11.0 and later Resolution Adaptive Ports LED, USB-C, TF card slot (up to 256 GB) Dimensions 78 x 78 x 16 mm Weight 0.155 kg

Shelly 1 Gen3 Set of 4 Controller WiFi/BluetoothShelly 1 Gen3 is not just a controller - it's a full-fledged smart home hub that offers unparalleled control, flexibility and security. Easily integrated into your existing infrastructure, this controller allows you to create advanced automation systems without investing in costly solutions. With Shelly 1 Gen3, you can transform your home and office into smart, energy-efficient and convenient spaces that respond to your needs. The kit includes 4 pieces of product.Smart control at your fingertipsShelly 1 Gen3 is an advanced Wi-Fi-enabled smart controller that revolutionizes the way you manage your home and office. Featuring a 1-channel dry contact rated at 16A, this versatile controller allows you to remotely control a wide range of home and office appliances, wherever you are. Upgrade standard electrical boxes, outlets and light switches without complicated installations.Advanced technology and high performanceShelly 1 Gen3 is equipped with the new ESP-Shelly-C38F processor with 8 MB of memory, which significantly increases its performance and efficiency. The increased durability of the terminals and the high level of security guarantee reliable operation for years to come. A Wi-Fi range enhancer and built-in Bluetooth gateway ensure a stable connection, enabling fast and smooth management of devices throughout the home.Uncompromised compatibility and ease of integrationYou don't need an additional HUB to use Shelly 1 Gen3. The controller is fully compatible with the Shelly Smart Control app, various home automation protocols, and popular platforms and voice assistants such as Alexa and Google Home. In addition, the Shelly 1 Gen3 supports KNXnet/IP communications, making it ideal for advanced automation projects.Versatile automationThe Shelly 1 Gen3 is the ideal choice for automating lighting, managing garage doors, upgrading legacy equipment, and many other applications. With the ability to set custom schedules, scenes and integrate with other Shelly devices, you can create a smart system that adapts to your lifestyle. Automate garden irrigation, control home temperature or manage lighting, all remotely and effortlessly.Security and reliabilityShelly 1 Gen3 provides a high level of security with advanced encryption. With support for various security protocols, you can rest assured that your data and devices are protected at the highest level. In addition, the device looks stylish and minimalist with its compact size and blue color. Invest in the Shelly 1 Gen3 today and discover a new dimension of comfort and control over your environment! Manufacturer Shelly Model 1Gen3x4 Dimensions 37 x 42 x 16 mm Weight 26 g Maximum torque of screw terminals 0.4 Nm Wire cross section 0.2 to 2.5 mm² (solid, wire and bootlace type fittings) Wire length without insulation 6 to 7 mm Mounting Wall console / flush-mounted box Housing material plastic Color blue Ambient temperature during operation -20°C to 40°C Ambient humidity during operation 30% to 70% RH Maximum altitude 2000m Power source 110-240 V~24-48 V⎓12 V⎓ Power consumption < 1.2 W Maximum switching voltage 240 V~30 V⎓ Maximum switching current 16 A (240 V~) 10 A (30 V⎓) Internal temperature sensor Yes Wi-FI protocol 802.11 b/g/n Wi-Fi radio frequency 2401-2483 МHz Maximum Wi-Fi RF power < 20 dBm Wi-Fi range Up to 50 meters in open space, up to 30 meters in closed space (depending on conditions) Bluetooth version 4.2 Bluetooth radio frequency 2400 - 2483.5 MHz Maximum Bluetooth RF power

Yeelight Light smart ceiling lamp C2201C400Light up rooms with warm and eye-pleasing light. The Yeelight smart ceiling lamp offers adjustable brightness, color and color temperature, and you won't have a problem installing it. What's more, its operation is facilitated by an app and voice commands. The product is also compatible with the Smart Dimmer and the Yeelight remote control, which are available separately. In addition, the lamp is distinguished by its IP54 water resistance, and its minimalist, slim design will make an elegant addition to your interior. Carefully considered designThe lamp features a minimalist and ultra-thin design, so it will fit into almost any modern interior. In addition, it offers a main, double white light that falls on the room and a colored light that casts a colorful glow on the ceiling giving a unique atmosphere in the room. It is IP54 water resistant, so you can successfully install it in the kitchen, bathroom or even on the terrace. In addition, the airtight design prevents dust and insects from entering the lamp. On the other hand, the included base is responsible for quick and easy installation - just lock it in place. Several control optionsEnjoy the freedom of use that Yeelight offers. The C2201C400 smart lamp works with Google Assistant, Apple Homekit, Amazon Alexa and Samsung SmartThings, so you can customize the device's operation with a simple voice command. In addition, you can use the dedicated Yeelight app or remote control (not included). The lamp also supports the available Yeelight Smart Dimmer, which allows you to control the lamp remotely, even when it has been turned off via a bell switch. Gentle light for the eyesThe lamp generates a light that is warm and pleasant to the eyes, so you don't have to worry about feeling tired or uncomfortable. What's more, it is equipped with a moonlight mode that offers low brightness levels. It will be perfect for a bedroom or a child's room, enveloping the room with soft light. Works the way you want it toCustomize the lamp's operation to suit your needs. You can adjust its brightness or color temperature (2700-6500 K). What's more, the Yeelight App offers the ability to customize the color of the light - you can choose from as many as 16 million colors. To personalize the device even more, set a timer and the lamp will turn off at a time of your choosing. Included lamp mounting elements (self-tapping screw x2, wall plug x2, silicone washer x2) instruction manual Specification: Manufacturer Yeelight Model YLXDD-0034 Name Yeelight Ultra Slim Smart Ceiling Light Color temperature 2700-6500 K Brightness 2000 lm@4000K Rated voltage 220-240V~50/60 Hz Max. 0.127A Rated power 24 W Operating humidity 0-85% RH Operating temperature -20°C to 40°C Compatibility Android 4.4 (or later), iOS 9.0 (or later) Control Google Home, Apple Home, Samsung SmartThings, Amazon Alexa, Yeelight app, Smart Dimmer, Yeelight remote control Dimensions φ400 x 25 mm Waterproof IP54 Wireless connectivity Wi-Fi IEEE 802.11 b/g/n 2.4 GHz, Bluetooth 4.2 BLE Operating frequency 2412-2472 MHz (Wi-Fi), 2402-2480 MHz (BT) Maximum output power 20 dBm (Wi-Fi), 0 dBm (BT-LE) Replaceable LED light source Yes , Inteligentna lampa sufitowa Yeelight Light C2201C400Rozświetl pomieszczenia ciepłym i przyjemnym dla oka światłem. Inteligentna lampa sufitowa Yeelight oferuje regulację jasności, koloru i temperatury barwowej, a jej montaż nie sprawi Ci problemu. Co więcej, jej obsługę ułatwiają aplikacja i komendy głosowe. Produkt jest też kompatybilny z dostępnymi w ofercie oddzielnie Smart Dimmer i pilotem zdalnego sterowania Yeelight. Dodatkowo lampa wyróżnia się odpornością na wodę na poziomie IP54, a jej minimalistyczny, smukły design będzie stanowił eleganckie uzupełnienie wnętrza.Starannie przemyślana konstrukcjaLampa charakteryzuje się minimalistycznym i ultra cienkim designem, dzięki czemu będzie pasować do niemal każdego nowoczesnego wnętrza. Ponadto oferuje główne, podwójne światło

Ottocast wireless car adapter for mirroringOttocast Mirror Touch is an innovative car adapter that offers two-way control when mirroring. It transfers your smartphone's screen directly to the car display, and you can operate apps by touch, just as conveniently as on your phone. It's a solution that makes daily commuting or traveling more comfortable and safer.Two-way control without restrictionsUnlike standard solutions, Ottocast Mirror Touch provides full compatibility with all applications - without locks or restrictions. Use maps, instant messaging or your favorite tools - exactly as you would on a smartphone screen. You also don't have to worry about your privacy - your messages or login data will remain exclusively on your phone. What's more, the low-latency technology of 80 ms makes using apps on the car screen completely natural. Scrolling, text entry or multimedia controls are all done in real time - without stuttering or lag.Integrated audio and safe drivingAll sounds from your phone are transferred to the car's factory audio system, so you can enjoy music, podcasts or phone calls in top quality. What's more, transferring the controls to the car's big screen noticeably increases comfort and safety while driving.CarPlay and Android Mirroring in oneThe device allows you to use wireless Apple CarPlay and full Android mirroring. The adapter automatically switches between modes, providing simple operation and seamless connectivity every time you start your vehicle.Compact design, fast charging, wide compatibilityThe Ottocast Mirror Touch is a slim device with a durable damage-resistant cable. It supports fast charging with up to 27 watts of power, so your smartphone will always be ready to go, even on long trips.The adapter works with most car models on the market - from sedans and SUVs (Sport Utility Vehicle) to luxury limousines and campers.Included Ottocast Mirror Touch adapter USB-A (Universal Serial Bus type A, a standard connector for data and power transfer) to USB-C (Universal Serial Bus type C, a symmetrical connector for high-speed data and power transfer) adapter User manual Manufacturer Ottocast Model CA450 Processor Single-core ARM Cortex A7 900 MHz Bluetooth (short-range wireless communication technology) 5.2 BLE (Bluetooth Low Energy, an energy-efficient version of Bluetooth) Bluetooth name CAR-XXXX Wi-Fi (Wireless Fidelity, a wireless data transmission technology) 802.11 a/b/g/n 2.4 GHz + 5 GHz Operating temperature From -20°C to 70°C Power supply 5V = 2A Dimensions 94.5 × 31.2 × 15 mm Available ports USB-C