BLE Bluetooth

ANCEL BS200 Engine Starting AidThe ANCEL BS200 is an engine starting aid for 12 V vehicles—it provides a stable power supply during vehicle startup. It uses supercapacitor technology and generates a peak current of 700 A, enabling it to assist with engine starting even with a weak battery, at low temperatures, and during frequent start-stop cycle operation. The product stands out with a service life of up to 100,000 charge and discharge cycles without failure, operates at temperatures ranging from -40°C to 80°C, and can be charged both from the vehicle’s battery and via a USB-C port. Additionally, it works with the Super Starter app, which makes it easy to monitor key parameters.Supercapacitor technology that reduces the load on the batteryThe BS200 model uses an innovative type of supercapacitor with low internal resistance and high power density. This enables immediate engine startup. The product is also equipped with patented supercapacitor control circuit technology and an algorithm for intelligent recognition of the vehicle’s startup mode. This means it can detect challenging operating conditions, such as cold starts at low temperatures or frequent start-stop cycles. Additionally, it dynamically distributes the storage and release of electrical energy between the starter motor and the car battery. All of this effectively prevents battery damage and extends its service life.Starting Even at Low Battery VoltageThe ANCEL BS200 can operate even when the car battery voltage drops significantly. As long as the voltage remains above 5 V, the device is able to function properly. This means you don’t have to worry about unexpected vehicle problems throwing a wrench in your plans!Various charging methodsOnce the device is connected to the battery, charging begins automatically, without the need for manual intervention. If necessary, you can also charge it manually via the USB-C port—using a 5 V / 2 A power adapter or a power bank. You also won’t have to wait too long for the product to be ready for use. When charging from the vehicle’s battery, the recharge time is approximately 3–22 minutes, and if you use the USB-C port, it will take about 3–50 minutes.Smart App for Monitoring Operating ParametersThe device works with the Super Starter app, which allows you to monitor the operating parameters of the starter motor and car battery in real time. Through the app, you can check, among other things, the device’s voltage, current, temperature, and capacity. The system also records the vehicle’s start-up history and data on voltage fluctuations and discharge currents. Additionally, it allows you to export the recorded information and offers smart notifications about malfunctions or maintenance reminders.Automatic and Emergency Start ModesWhen the device is properly connected, it automatically supports the starting process every time the engine is started. In an emergency, the user can also use the forced start function available in the app or activate manual mode using the Manual Discharge button.Operation in Extreme Temperatures and High DurabilityThe BS200 model is designed to operate over a very wide temperature range: from -40°C to 80°C. The device uses safe materials and contains no flammable chemicals found in traditional lithium batteries, thereby eliminating the risk of swelling, leakage, or ignition. In addition, the housing has an IP65 protection rating, which increases the starter’s durability during everyday use. Manufacturer ANCEL Model BS200 Device Type 12 V engine jump-start device Operating Voltage 5–20 V Max. Output Voltage 15 V Max. Current 700 A Supported Vehicles 12 V vehicles Lifespan Up to 100,000 charge and discharge cycles Operating temperature From -40°C to 80°C Connectivity Bluetooth BLE 5.3 App Super Starter Charging method Automatic charging from a car battery, USB-C charging Charging time Fast charging from car batteries: approx. 3–22 minCharging via USB-C (5 V / 2 A): approx. 3–22 min Average power consumpti

DDPAI N5 Pro Dash CamThe DDPAI N5 Pro is a dual-channel dash cam that records footage from both the front and rear of the vehicle, allowing for better documentation of situations on the road. The front camera offers three recording modes: 4K@30 HDR, 4K@25 HDR, and 3K@60, and the F1.8 lens provides a wide 143° field of view. The device supports microSD cards with capacities up to 512 GB, Wi-Fi 6 at 5.8 GHz, Bluetooth 5.4, multi-system GNSS, and ADAS features. The package is rounded out by a 3-axis G-sensor and a supercapacitor, and the ability to use optional modules allows you to expand the dashcam’s capabilities.4K HDR or 3K at 60 fpsDepending on the situation, the DDPAI N5 Pro allows you to tailor the recording settings to the driver’s needs. The 4K@30 HDR and 4K@25 HDR modes prioritize high image resolution, making it easier to spot details when reviewing the footage later. The 3K@60 mode, on the other hand, records at 60 frames per second, making it well-suited for capturing more dynamic situations on the road. The F1.8 lens with a 143° field of view captures a wide area in front of the car, and footage is saved in MP4 format using AI.265 or H.264 encoding.GNSS and Driver Assistance FeaturesThe DDPAI N5 Pro supports five satellite navigation systems: GPS, BDS, GLONASS, GALILEO, and QZSS. The dashcam also offers ADAS features, including an alert that notifies you when the vehicle in front starts moving, which can be useful while waiting at traffic lights or in traffic. Another feature is the driver fatigue alert, which provides additional support during longer trips. The built-in 3-axis G-sensor reacts to changes in G-force associated with sudden events while driving.Fast Connectivity and Storage for RecordingsWi-Fi 6 support in the 5.8 GHz band ensures fast wireless communication with the dashcam and facilitates access to recorded footage. The DDPAI N5 Pro also uses Bluetooth 5.4 (BLE), a wireless communication standard. Footage can be stored on a microSD card with a capacity of up to 512 GB, allowing you to choose the amount of available storage based on how frequently you use the camera.Supercapacitor and ExpandabilityThe DDPAI N5 Pro is equipped with a supercapacitor and is designed to operate at temperatures ranging from -20°C to 70°C, allowing it to function in the varied conditions found inside a car. The housing measures 102 × 62.5 × 31.3 mm, and standard power is provided by a car charger and a 3.5-meter cable. The dashcam also supports an optional hardwire kit, which expands the device’s connectivity options with the car’s electrical system. The model is also compatible with an optional IPS energy management system, a 4G module, and a radar module, allowing users to customize the setup according to their needs. Manufacturer DDPAI Model N5 Pro Number of channels front + rear Front camera resolution 4K@30 HDR / 4K@25 HDR / 3K@60 Lens aperture F1.8 Field of View 143° Lens Construction 2G4P Video Encoding AI.265 / H.264 Video Format MP4 G-Sensor 3-axis Supported Memory Cards microSD up to 512 GB Wi-Fi Wi-Fi 6, 5.8 GHz Bluetooth 5.4 (BLE) GNSS GPS, BDS, GLONASS, GALILEO, QZSS ADAS Front Vehicle Departure Alert, Driver Fatigue Alert Supercapacitor Yes IPS Power Management Supported, optional 4G Module Supported, optional Radar Module Supported, optional Operating Temperature -20°C to 70°C Storage temperature -40°C to 85°C Dimensions 102 × 62.5 × 31.3 mm

Yeelight Arwen Ceiling Light 600D smart ceiling lampYeelight Arwen 600D is a smart ceiling lamp with two independent lighting sources - a powerful RGBIC main light and a colorful backlight. So it can brightly illuminate an entire room or create a unique atmosphere for a party, movie night or romantic dinner! With just a touch on the app or a voice command, you can change the mood in your living room, bedroom or home office. The lamp is also very easy to install and features a high CRI of Ra98, which means it reproduces colors perfectly.Light from the front and backThe Arwen 600D offers both an addressable RGBIC headlight with presets that can shine multiple colors simultaneously (for example, creating transitions and gradient effects), and an independently controlled RGB backlight with the ability to set one of up to 16 million colors. So you can easily combine intense illumination with a subtle colorful glow! Test different settings and create a unique atmosphere for any occasion.Full control over brightness and color temperatureYeelight Arwen 600D offers infinitely adjustable brightness and color temperature (ranging from 2700K to 6500K). So you can choose a warm, soft light for the evening, a neutral light for everyday activities, or a cool and crisp light that promotes concentration while working or studying.Two modes for day and nightThe full brightness of 4800 lm in Sunlight mode allows you to effectively illuminate even large spaces of up to 35 m2. This is perfect for everyday use! On the other hand, the gentle Moonlight mode with a warm 2700K color creates the perfect conditions for calming and preparing for sleep.Easy installationThe lamp is equipped with a quick installation system. It only takes a few moments to place it on the base: fit, press and you're done! No specialized tools, no frustration. This is an ideal solution not only for do-it-yourselfers!Smart control on your termsControl the light as you're comfortable: using the Xiaomi Home app, a classic remote control, a wall switch, or by voice, using Amazon Alexa or Google Assistant. You can also connect the lamp with other devices in a group and control all the lighting in your home at once.Excellent color reproductionWith a high CRI Ra98, the lamp faithfully reproduces natural colors and provides excellent visibility. This is important not only for working or reading, but also for everyday activities such as selecting clothes, cooking or playing with children. Arwen 600D light takes care of the comfort of your eyes! Manufacturer Yeelight Name Yeelight Arwen D600 Ceiling Light Model YLXDD-0150 Dimensions 495 × 92 mm Max brightness 4800 lm Power factor 0.9 Operating temperature 25°C Working environment humidity 0-85% RH Color temperature 2700-6500K Nominal input current 220-240 V 50 Hz max. 0.23 A Rated power 50 W (81 x 1 W / LED module + 60 x 0.15 W / LED module); 20 W (27 x 1.35 W / LED module + 60 x 0.15 W / LED module) Supported operating systems Android 4.4 and later, iOS 9.0 and later Compatibility Xiaomi Home, SmartThings, Amazon Alexa, Google Home Wireless connectivity Wi-Fi IEEE 802.11 b/g/n 2.4 GHz, Bluetooth 4.2 BLE Operating frequency Wi-Fi: 2412-2472 MHz, Bluetooth: 2402-2480 MHz Max output power of Wi-Fi and Bluetooth Wi-Fi: 17.21 dBm, Bluetooth: 5.08 dBm Backlighting Front: addressable RGBIC; Rear: RGB;

DDPAI Z90 2026 Dash CamThe DDPAI Z90 2026 is a car dash cam with a front camera offering 4K resolution (3840 × 2160) at 30 fpsand a rear camera with a resolution of 2560 × 1440 at 25 fps. The front module can also record video at 2560 × 1440 at 60 fps, and the device features Dual HDR technology, built-in GPS, 4G connectivity, parking monitoring, and support for microSD cards with capacities up to 512 GB. Additional features include Wi-Fi 6 Turbo 5 GHz, Bluetooth 5.1, a 3-inch screen, app control, a 3-axis G-sensor, and wide viewing angles of 143° in the front and 126° in the rear.Detailed 4K RecordingsThe DDPAI Z90 2026 front camera allows for 4K recording at 30 fps, ensuring that a wealth of detail is preserved in the footage—useful when reviewing your route later. Alternatively, a 2560 × 1440 mode at 60 fps is available, providing smoother footage when recording rapidly changing road conditions. The front lens has an F1.8 aperture and a 143° field of view, while the rear camera features an F2.0 aperture, a 126° field of view, and records video at a resolution of 2560 × 1440 at 25 fps, all complemented by Dual HDR technology.Parking Monitoring, GPS, and 4G ConnectivityThe dashcam supports parking monitoring, allowing it to keep an eye on your car even after you’ve finished driving. The built-in GNSS module works with GPS, BDS, GLONASS, GALILEO, and QZSS systems, providing access to vehicle location data. The device also offers 4G connectivity, a 3-axis G-sensor, and a 3-Channel Connection feature with Direct Wiring, expanding the dashcam’s installation and usage options.Wi-Fi 6, App, and User-Friendly OperationThe DDPAI Z90 2026 uses Wi-Fi 6 Turbo in the 5 GHz band and Bluetooth 5.1, which improves wireless communication between the dashcam and a mobile device. The mobile app allows for convenient management of the camera’s functions, while the voice command “Take Photo” lets you take a photo without having to reach for the dashcam. The housing also features a 3-inch screen with a resolution of 640 × 360, allowing for a direct preview of the video feed and key information from the device.Up to 512 GB of storage and a wide operating temperature rangeRecordings are saved in MP4 format, and the device supports H.265 and H.264 encoding as well as microSD cards with capacities up to 512 GB. The DDPAI Z90 2026 is equipped with a supercapacitor, a microphone, and a speaker, and uses a USB-C port for power. The dashcam can operate at temperatures ranging from -20°C to 70°C; its storage temperature range is from -40°C to 85°C, while the front module measures 83 × 57.5 × 46.3 mm and weighs 196 g. Manufacturer DDPAI Model Z90 2026 Front camera resolution 3840 × 2160 at 30 fps / 2560 × 1440 at 60 fps Rear Camera Resolution 2560 × 1440 at 25 fps HDR Dual HDR Front Camera Field of View 143° Rear Camera Field of View 126° Front camera aperture F1.8 Rear camera aperture F2.0 Video encoding AI.265 and H.264 Video format MP4 G-sensor 3-axis 4G connectivity Yes Parking monitoring Yes GPS Built-in GNSS GPS, BDS, GLONASS, GALILEO, QZSS App control Yes 3-channel connection Direct Wiring Wi-Fi Wi-Fi 6 Turbo 5 GHz Bluetooth BLE 5.1 Supported storage microSD card up to 512 GB Voice control “Take Photo” command Screen 3 inches Screen resolution 640 × 360 Microphone Yes Speaker Yes Supercapacitor Yes Operating temperature -20°C to 70°C Storage temperature -40°C to 85°C Power connector USB-C Front camera dimensions 83 × 57.5 × 46.3 mm Front camera weight 196 g

DDPAI Ranger M1 Pro motociklo vaizdo registratoriusDDPAI Ranger M1 Pro – iš dviejų kompaktiškų modulių sudarytas vaizdo registratorius, kurių kiekvienas gali filmuoti iki 3K (2880 × 1620) raiška 30 k./s. Objektyvai pasižymi plačiu 145° matymo kampu ir šviesia F1.55 diafragma, todėl aprėpia didelę aplinkos dalį ir išlaiko gerą vaizdo detalumą. Įrenginys taip pat palaiko iki 256 GB microSD korteles, 5 GHz Wi-Fi su Wi-Fi Turbo technologija, Bluetooth BLE 5.4 ir turi šešių ašių giroskopą. IP67 apsaugos klasė leidžia jį naudoti sudėtingomis sąlygomis.3K filmavimas ir platus matymo laukasAbu Ranger M1 Pro moduliai gali filmuoti 3K (2880 × 1620) raiška 30 k./s., todėl įrašuose išsaugoma daug detalių. Taip pat galima pasirinkti 2K 2560 × 1440 raišką 30 k./s. 145° matymo kampas aprėpia plačią aplinkos dalį, o F1.55 diafragma padeda išgauti aiškesnius įrašus esant silpnesniam apšvietimui.Vaizdo stabilizavimas ir šešių ašių giroskopasDDPAI Ranger M1 Pro naudoja šešių ašių giroskopą ir programėle valdomą stabilizavimo technologiją. Ji padeda sumažinti vibracijos ir įrenginio judėjimo poveikį įrašo kokybei, o tai ypač naudinga važiuojant nelygiu paviršiumi. Dėl to įrašai būna aiškesni ir juos patogiau peržiūrėti.5 GHz Wi-Fi ir iki 256 GB atminties5 GHz Wi-Fi ryšys su Wi-Fi Turbo technologija pagerina belaidį ryšį ir failų perdavimą, o Bluetooth BLE 5.4 papildo įrenginio ryšio galimybes. Įrašus galima saugoti iki 256 GB talpos microSD kortelėje. Vieno modulio matmenys – 63 × 30,5 × 29,6 mm, todėl sumontuotas įrenginys užima nedaug vietos. Gamintojas DDPAI Modelis Ranger M1 Pro Modulių skaičius 2 Didžiausia kiekvieno modulio raiška 3K, 2880 × 1620, 30 k./s. 2K raiška 2560 × 1440, 30 k./s. Objektyvo diafragma F1.55 Matymo kampas 145° Stabilizavimas programėle valdoma stabilizavimo technologija Judesio jutiklis šešių ašių giroskopas Wi-Fi 5 GHz su Wi-Fi Turbo Bluetooth BLE 5.4 Atminties kortelės microSD iki 256 GB Maitinimas USB-A / Intelligent Hardwire Kit Atsarginis maitinimas 80 mAh ličio elementas (Super Lithium) Apsauga dingus maitinimui duomenų apsauga staiga nutrūkus maitinimui Apsaugos klasė IP67 Darbinė temperatūra -20°C–45°C Vieno modulio matmenys 63 × 30,5 × 29,6 mm

DDPAI Z90T Dash CamThe DDPAI Z90T dash cam is a 3-channel system that records footage in front of, behind, and inside the vehicle. The front camera records in 4K resolution at 3840 × 2160 at 30 fps or 2560 × 1440 at 60 fps, while the rear and interior cameras offer 2560 × 1440 at 25 fps. The model supports Triple HDR, 4G connectivity, 5 GHz Wi-Fi 6, and Bluetooth 5.1, and also features built-in GPS, a 3-axis G-sensor, and a parking monitoring function. Recordings can be saved to a microSD card with a capacity of up to 512 GB, and the 3-inch screen with a resolution of 640 × 360 provides direct access to the device’s interface.Three Cameras – Wider Range of Event RecordingThe three-camera system allows you to simultaneously record three areas: the road ahead of the vehicle, the area behind the car, and the interior of the vehicle. The front camera has a 143° field of view and an F1.8 aperture, the rear camera offers 126° and F2.0, and the interior camera has 123° and F1.55. Triple HDR technology helps balance bright and dark areas of the image, allowing more detail to be preserved in scenes with significant differences in lighting. The ability to record with the front camera at 2560 × 1440 at 60 fps provides an additional option for users who want smoother video.GPS, 4G, Wi-Fi 6, and App SupportThe built-in positioning module uses GPS, BDS, GLONASS, GALILEO, and QZSS, providing the dashcam with access to location data. The DDPAI Z90T also supports 4G connectivity (this feature requires a dedicated, optional 4G module or LTE power kit), and for wireless communication, it uses Wi-Fi 6 Turbo operating in the 5 GHz band and Bluetooth 5.1 BLE. The dashcam can be controlled via an app, providing an additional way to access its features without having to rely solely on the controls located on the device.Parking Monitoring, G-Sensor, and Voice ControlThe DDPAI Z90T supports parking monitoring, allowing it to record events even while the car is parked. The built-in 3-axis G-sensor reacts to G-forces, allowing the device to detect sudden events related to vehicle movement. Voice control, meanwhile, lets you take a photo by saying “Take Photo,” without having to manually operate the dashcam. The built-in microphone records audio, and the speaker allows the device to play audio messages. Manufacturer DDPAI Model Z90T Number of channels 3 Front camera resolution 3840 × 2160 at 30 fps / 2560 × 1440 at 60 fps Rear camera resolution 2560 × 1440 at 25 fps Interior camera resolution 2560 × 1440 at 25 fps HDR Triple HDR Front camera field of view 143° Rear camera field of view 126° Interior camera field of view 123° Front camera aperture F1.8 Rear camera aperture F2.0 Internal camera aperture F1.55 Video encoding AI.265, H.264 Video format MP4 G-sensor 3-axis 4G connectivity Yes Parking monitoring Yes GPS Yes App control Yes Wi-Fi Wi-Fi 6 Turbo 5 GHz Bluetooth BLE 5.1 Supported GNSS systems GPS, BDS, GLONASS, GALILEO, QZSS Supported storage microSD card up to 512 GB Voice control Yes, “Take Photo” command Screen 3 inches Screen resolution 640 × 360 Microphone Yes Speaker Yes Supercapacitor Yes Operating temperature -20°C to 70°C Storage temperature -40°C to 85°C Power interface USB-C Main module dimensions 83 × 57.5 × 46.3 mm Main module weight 196 g