Bluetooth 3.5 mm

Technical data Headphone type: Bluetooth, in-ear Frequency response (Hz): 20-20000 Headphone resistance (ohms): 32 Headphone sensitivity (dB): 121 +/- 1.5 Driver size (mm): 10 Interface: Bluetooth 5.3 / Type-C (for charging) Talk time/music time (h): 3.5-4.5 Charging time (h): 1-2 Range (m): 15 Noise reduction: Yes, ANC (active noise cancellation) + ENC (ambient noise cancellation, 4 microphones) Chip: JL7006 Material: plastic Battery: Lithium polymer, 30 mAh earphone + 200 mAh charging case Dimensions (mm): 19x24x34 (headset) / 60x28x49 (charging case)

Konfigurācija: 2.0, Jauda (RMS): 10 W, Frekvenču diapazons: 120 - 20000 Hz, Bezvadu savienojumi: Bluetooth, USB: Ir, 3.5 mm (AUX): Ir, Micro SD: Ir, Akumulatora darbības laiks (h): 7, Garantija: 2 gad

Konfigurācija: 2.0, Jauda (RMS): 10 W, Frekvenču diapazons: 120 - 20000 Hz, Bezvadu savienojumi: Bluetooth, USB: Ir, 3.5 mm (AUX): Ir, Micro SD: Ir, Akumulatora darbības laiks (h): 7, Garantija: 2 gad

• Stereo speakers for gamers • Unique feature: converting to audio tape • Dual audio source mode: line-in and Bluetooth 5.0 • Music power: RMS 8W, PMPO 300W • 2 x 2-inch driver units • Frequency response: 180 ~ 20000 Hz • Touch changeable RGB lighting • Cable length: ~120cm • Audio input: stereo jack 3.5 mm, Bluetooth 5.0 • Powered by USB port • Speaker dimensions (alone): 85 x 195 x 75 mm / converted to soundbar: 380 x 85 x 75 mm • Weight: 671g Type Gamer Bluetooth Stereo Speakers Bluetooth + AUX input + Speakers 2x2” Frequency range 180Hz~20kHz Audio power output RMS 8W, PMPO 300W LED lighting + Color Black Dimensions 85 x 195 x 75 mm (single) / converted to soundbar: 380 x 85 x 75 mm Weight (kg) 0.671

Shelly 1PM Mini Gen4 Controller Zigbee/MatterThe Shelly 1PM Mini Gen4 controller allows you to remotely control electrical devices and accurately measure their energy consumption. It supports Wi-Fi, Zigbee, Bluetooth and Matter, so it can be easily integrated into various home automation systems. It works on the local network and via the cloud. The built-in web interface allows you to configure and monitor operation without the need for additional software. Thanks to its small size, it fits into typical installation boxes and can be mounted behind outlets or switches in areas with limited space.Control and monitoring in oneThe Shelly 1PM Mini Gen4 works as both a relay and an energy consumption meter. This gives you not only the ability to remotely turn devices on and off, but also insight into actual power consumption. The power measurement function allows you to accurately analyze the operation of connected equipment and helps optimize energy costs. The device sends data to the cloud or stores it locally depending on user preference.Compatibility and ecosystem integrationsThe device supports Zigbee, Wi-Fi, Bluetooth and Matter protocols. It can be integrated into systems such as Google Home, Amazon Alexa, SmartThings and KNX. The controller also supports MQTT, HTTPS, Web Hooks, UDP and local APIs, enabling advanced scenarios and collaboration with other smart home components.Programming, schedules and responsesThe product allows the creation of complex schedules and scenarios with the ability to set up to 20 schedules and webhooks - each with up to 5 URLs. It also supports scripts written in Shelly Script language, which allows automating actions depending on time conditions, device status or input data. You can also use so-called virtual components, which increase the flexibility of system configuration.Stability and operational securityThe Shelly 1PM Mini Gen4 is equipped with a number of protections, including overheating, overvoltage, overload and power overload. Thanks to the ESP-Shelly-C68F microprocessor and 8 MB of flash memory used, the device provides fast data processing and stable operation. In addition, it can act as a repeater, amplifying Zigbee or Wi-Fi signals in hard-to-reach areas. General Manufacturer Shelly Model 1PMMiniGen4 Physical parameters Dimensions 29 x 34 x 16 ± 0.5 mm / 1.34 × 1.11 × 0.63 ±0.02 inches Weight 18 ±1 g / 0.63 ±0.04 ounces Maximum tightening torque of screw terminals 0.4 Nm / 3.5 lbf.in Wire cross section 0.2 to 2.5 mm² / 24 to 14 AWG (wire, wire and crimp sleeves) Wire stripping length 6 to 7 mm / 0.24 to 0.28 in. Mounting Wall box Housing material Plastic Housing color Red Connector color Gray Environmental conditions Operating temperature -20°C to 40°C / -5°F to 105°F Operating humidity 30% to 70% RH Maximum altitude. 2000 m / 6562 ft Electrical parameters Power supply 110-240 V AC Relay NO contact, 1 pole, µ contact External protection Tripping characteristic B or C, max. rated current 10 A, min. breaking capacity 6 kA, energy limiting class 3 Output circuit parameters Maximum switching voltage 240 V AC Maximum switching current 8 A / 240 V AC Power measurement Yes Overvoltage / cut-off protection Yes Overload / cutout protection Yes Over-power protection / cut-off Yes Sensors, meters Built-in internal temperature sensor Yes Wi-Fi Protocol 802.11 b/g/n RF bandwidth 2412 - 2472 MHz Maximum RF power < 20 dBm Range Up to 30 m / 100 feet indoors and 50 m / 160 feet outdoors (depends on local conditions) Bluetooth Protocol 5.0 RF band 2402 - 2480 MHz Maximum RF power < 4 dBm Range Up to 10 m / 33 feet indoors and 30 m / 100 feet outdoors (depends on local conditions) Zigbee Protocol 802.15.4 RF bands 2400 - 2483.5 MHz Maximum RF power < 20 dBm Range Up to 100 m / 328 feet indoors and 300 m / 984 feet outdoors (depends on local conditions) Microcontroller unit CPU ESP-Shelly-C68F Flash memory 8 MB Firmware capabilities Schedules 20 Webhooks (URL shares) 20, each with up to 5 URLs Scrip

Shelly 1 Gen4 Controller Zigbee/MatterThe Shelly 1 Gen4 Zigbee/Matter controller is a compact, backplane controller with potential-free contacts that allows you to remotely control a variety of electrical devices - either via the local network or the Internet. The device supports multiple communication protocols (Wi-Fi, Bluetooth, Zigbee, Matter), so you can easily adapt it to your preferred home automation system. It can be integrated with popular platforms such as Google Home, Alexa and SmartThings. The controller will work well in residential, office, hotel and other installations.Integration with any systemThe Shelly 1 Gen4 controller supports four major wireless communication protocols: Zigbee (802.15.4), Wi-Fi (802.11 b/g/n), Bluetooth 4.2 and Matter. This allows you to choose for yourself which medium you want to use depending on your installation capabilities and smart home ecosystem. The product also acts as a Zigbee repeater, which extends the network's range. In case of a weak Wi-Fi signal, it can act as its repeater, increasing the stability of the connection.Remote access and schedulesThe device can operate over both local Wi-Fi and the Internet, allowing remote access regardless of the user's location. A built-in web interface allows configuration and control without installing additional applications. An advanced scheduling system provides the ability to define detailed scenarios taking into account the day of the week, the hour and even the second, which works well for automation of lighting, ventilation or garden watering, among others.Cooperation with applications and systemsThe Shelly 1 Gen4 model works with many home automation systems. It supports HTTP APIs, MQTT(S), WebHooks, UDP protocol and virtual components. In addition, it offers KNX net/IP compatibility. With ShellyScript scripting support, it is possible to create custom rules and operation logic. General Manufacturer Shelly Model 1Gen4 Physical parameters Dimensions 37 x 42 x 16 mm / 1.46 x 1.65 x 0.63 inches Weight 26 g / 0.92 ounces Maximum tightening torque of screw terminals 0.4 Nm / 3.5 lbin Cable cross section 0.2 to 2.5 mm² / 24 to 14 AWG (solid, multi-stranded and sleeved wires) Length of stripped wire 6 to 7 mm / 0.24 to 0.28 in. Mounting Wall console Housing material Plastic Housing color Blue Clamp color Gray Environmental conditions Operating temperature -20°C to 40°C / -5°F to 105°F Operating humidity 30% to 70% RH Maximum altitude. 2000 m / 6562 ft Electrical parameters Power supply 110-240 V~ ; 24-48 V= ; 12 V= Power consumption < 1 W Neutral wire required No External protection Overcurrent circuit breaker according to EN60898-1 (trip characteristic B or C, rated current max. 16 A, minimum breaking capacity 6 kA, energy limitation class 3) Output circuit parameters Maximum switching voltage 240 V~ ; 30 V= Maximum switching current 16 A / 240 V~ ; 10 A / 30 V= Sensors and measurements Built-in temperature sensor Yes Wi-Fi Protocol 802.11 b/g/n RF bandwidth 2412 - 2472 MHz Maximum RF transmit power < 20 dBm Range Up to 30 m indoors / 100 feet and up to 50 m outdoors / 160 feet (depending on local conditions) Bluetooth Protocol 4.2 RF band 2402 - 2480 MHz Maximum RF transmit power < 4 dBm Range Up to 10 m indoors / 33 feet and up to 30 m outdoors / 100 feet (depending on local conditions) Zigbee Protocol 802.15.4 Zigbee repeater function Yes RF band 2400 - 2483.5 MHz Maximum RF transmit power < 20 dBm Range Up to 100 m indoors / 328 feet and up to 300 m outdoors / 984 feet (depending on local conditions) Microprocessor unit Processor ESP-Shelly-C68F Flash memory 8 MB Firmware features Number of schedules 20 Webhooks (URL shares) 20, with 5 URLs per webhook Scripting support Yes MQTT Yes

functions Sound is limited to 85 db to protect children's hearing Designed especially for children, it is light, comfortable and durable Built-in microphone for hands-free calls Clear and balanced sound Technical data Bluetooth version: v5.3 Wireless range: 10 m Microphone: Yes Frequency: 2.4 GHz, class 2 Supported profiles: a2dp\avctp\avdtp\avrcp\hfp\spp\smp\att\gap\gatt\rfcomm\sdp\l2cap profile Driver block: 40 mm Frequency response: 20Hz-20kHz Sensitivity: 85db - Child mode, 102db - Normal mode Resistance: 32Ω Music playback time: up to 25 hours Standby time: up to 300 hours Charging time: up to 2 hours Sound control: Yes Cable length: 120 cm Input: Type C, 5V Bluetooth pairing name: Tellur Buddy Product dimensions: 18 x 16 x 3.5 cm Product weight: 154g Package Includes: 1 x Bluetooth Headphone, 1 x Type-C Cable, 1 x Audio Cable, 1 x User Manual Manufacturer Tellurium Music playback mode up to 25 hours Connection type Wireless On standby up to 300 hours Bluetooth + HFP + A2DP + AVRCP + Operating range 10 years Battery charging time 2 hours Micro USB + Headphone buttons Yes AUX input - Dimensions 18 x 16 x 3.5 cm Weight 154 g

functions Sound is limited to 85 db to protect children's hearing Designed especially for children, it is light, comfortable and durable Built-in microphone for hands-free calls Clear and balanced sound Technical data Bluetooth version: v5.3 Wireless range: 10 m Microphone: Yes Frequency: 2.4 GHz, class 2 Supported profiles: a2dp\avctp\avdtp\avrcp\hfp\spp\smp\att\gap\gatt\rfcomm\sdp\l2cap profile Driver block: 40 mm Frequency response: 20Hz-20kHz Sensitivity: 85db - Child mode, 102db - Normal mode Resistance: 32Ω Music playback time: up to 25 hours Standby time: up to 300 hours Charging time: up to 2 hours Sound control: Yes Cable length: 120 cm Input: Type C, 5V Bluetooth pairing name: Tellur Buddy Product dimensions: 18 x 16 x 3.5 cm Product weight: 154g Package Includes: 1 x Bluetooth Headphone, 1 x Type-C Cable, 1 x Audio Cable, 1 x User Manual Manufacturer Tellurium Connection type Wireless Operating range 10 years Music playback mode up to 25 hours On standby up to 300 hours Bluetooth + HFP + A2DP + AVRCP + Battery charging time 2 hours Micro USB + AUX input - Headphone buttons Yes Dimensions 18 x 16 x 3.5 cm Weight 154 g

NEEWER TP35 Flexible Mini Tripod with Remote ControlThe NEEWER TP35 is a compact and flexible mini tripod that’s perfect for vlogging, live streaming, video recording, and mobile photography. The frame is made of aluminum alloy and ABS plastic, and the legs are coated with non-slip silicone to improve stability and comfort. Each leg consists of multiple interwoven aluminum wires, allowing the tripod to be freely bent, wrapped around various surfaces, and adapted to more challenging working conditions.Flexible design and stable equipment mountingUnlike traditional tripods, the TP35 can be mounted on pipes, branches, railings, or other non-standard surfaces. The design supports devices weighing up to 2 kg, making it ideal for smartphones, compact DSLR cameras, and action cameras. The non-slip finish on the legs improves grip and helps keep the equipment stable while recording.Ball head and greater framing freedomThe tripod is equipped with a metal ball head with a U-shaped notch, allowing for 360° rotation and 90° tilt. This lets you conveniently switch between vertical and horizontal frames and easily set the appropriate angle for recording or photography. A side locking knob allows for quick and stable locking of the selected position.Wide compatibility and additional accessoriesThe hidden phone mount supports devices ranging from 5.5 to 9 cm in width and allows for convenient use of smartphones while recording and taking photos. Two cold shoe mounts allow for the attachment of additional accessories, such as a microphone or LED light, and the 1/4" side thread lets you expand the setup with other components, including a magic arm or a monitor. The kit also includes an adapter for action cameras and a Bluetooth remote control that allows you to take photos remotely from a distance of up to 10 meters.Lightweight design ready for mobile useThe tripod weighs just 315 g and takes up very little space when folded, so it fits easily into a backpack or camera bag. An additional strap hole allows you to attach a lanyard to prevent accidental drops, which increases convenience when working in the field and while traveling.Included Flexible tripod with ball head Action camera adapter Bluetooth remote control User manual Specifications Manufacturer NEEWER Model TP35 Compatibility Smartphones, action cameras, compact cameras Material Aluminum alloy, ABS Maximum load capacity 2 kg Phone width range 5.5–9 cm Head rotation range 360° Head tilt range 90° Mounting thread 1/4" Remote control connectivity Bluetooth Remote control range Up to 10 m Dimensions 290 × 75 × 55 mm Weight 315 g