Bluetooth 4.2

Shelly Dimmer Gen3 WiFi Light ControllerThe Shelly Dimmer Gen3 is a compact, single-circuit light dimmer that allows precise control of lighting brightness from a smartphone, tablet, computer or home automation system. It works over a Wi-Fi local network without the need for an additional hub, and also supports remote control via the cloud. It can work with or without a neutral wire. The device also offers Wi-Fi signal amplification, interoperability with Bluetooth and BLE Gateway, and a range of automation options, including schedules, scripts and integration with systems like Home Assistant, Google Home, Alexa or SmartThings.Working with and without a neutral wireThe Shelly Dimmer Gen3 allows installation in both systems with and without a neutral wire, which is key when retrofitting existing installations. For operation without a neutral wire, a Bypass module is required if the load is less than 20 watts - such a solution prevents the lamp from accidentally glowing after it is turned off.Accurate measurements and protectionWhen the neutral wire is connected, the device allows the measurement of voltage (180-240 V), current (0-3 A) and energy consumption. These measurements are made with an accuracy of ±5%. In addition, the device is equipped with an internal temperature sensor and short-circuit and overload protection. Note: these functions work properly only when connected with a neutral conductor.Convenient control and precise dimmingThe product supports trailing edge mode, which provides smooth dimming of a wide range of light sources - from LEDs (up to 150 W) to halogen bulbs (up to 200 W) and electronic transformers. Automatic dimmer calibration guarantees a uniform dimming effect regardless of the type of light source. Built-in functions such as minimum and maximum brightness setting, transition time adjustment and night mode allow full control over lighting - both manually and through schedules.Automation and advanced schedulesShelly Dimmer Gen3 supports up to 20 schedules and 20 webhooks (with 5 URLs for each). It allows you to create advanced scenarios using scripts and local actions. You can schedule brightness changes, transition times and set automatic light on/off. With support for MQTT, KVS and virtual components, deep integration with advanced building automation systems is possible. General Manufacturer Shelly Model DimmerGen3 Physical parameters Dimensions 38 x 42.5 x 16.5 mm / 1.50 x 1.67 × 0.65 inches Weight 24.3 g / 0.86 oz Maximum terminal tightening torque 0.4 Nm / 3.5 lbin Cable cross section 0.2 to 2.5 mm² / 24 to 14 AWG (solid, multi-strand, sleeves) Length of stripped wire 5 to 6 mm / 0.20 to 0.24 in. Mounting Wall box Housing material Plastic Case color Green, print: black Color of connectors Black Environmental conditions Operating temperature -20°C to 40°C / -5°F to 105°F Operating humidity 30% to 70% RH Maximum altitude. 2000 m / 6562 ft Electrical parameters Power supply 220-240 V~, 50 Hz Power consumption < 1,5 W No neutral wire Yes Minimum load without neutral wire and without Bypass 20 W Dimming type Trailing edge External protection 16 A, characteristic B or C, 6 kA breaking capacity, energy limitation class 3 Short-circuit protection Yes Output circuit parameters Maximum output power 200 W Sensors and measurements Voltage range (AC) 180-240 V Accuracy of voltage measurement ±5% (when used with neutral conductor) Current range (AC) 0-3 A Accuracy of current measurement ±5 % (when used with neutral conductor) Internal temperature sensor Yes Wi-Fi Protocol 802.11 b/g/n RF band 2412-2472 MHz RF power < 20 dBm Range Up to 30 m indoors / 50 m outdoors (depending on conditions) Bluetooth Protocol 4.2 RF band 2402-2480 MHz Maximum RF power < 4 dBm Range Up to 10 m indoors / 30 m outdoors (depending on conditions) Microprocessor unit CPU ESP32 C3 / STM32 G051 Clock frequency ESP32 C3 - 40 MHz Flash memory 8 MB Firmware features Schedules 20 Webhooks (URL shares) 20 with 5 URLs per webhook Scripts

Set of 2 Shelly 1 Gen4 Zigbee/Matter ControllersThe Shelly 1 Gen4 Zigbee/Matter is a compact flush-mounted controller with potential-free contacts that allows for remote control of various electrical devices—both via a local network and the internet. The device supports multiple communication protocols (Wi-Fi, Bluetooth, Zigbee, Matter), making it easy to integrate with your preferred home automation system. It can be integrated with popular platforms such as Google Home, Alexa, and SmartThings. The controller is ideal for residential, office, hotel, and other facilities. The set includes two controllers.Integration with any systemThe Shelly 1 Gen4 controller supports four main wireless communication protocols: Zigbee (802.15.4), Wi-Fi (802.11 b/g/n), Bluetooth 4.2, and Matter. This allows you to choose which medium to use based on your installation’s capabilities and smart home ecosystem. The product also functions as a Zigbee repeater, which extends the network range. In the event of a weak Wi-Fi signal, it can act as a Wi-Fi booster, increasing connection stability.Remote access and schedulesThe device can operate both on a local Wi-Fi network and over the internet, enabling remote access regardless of the user’s location. The built-in web interface allows for configuration and control without the need to install additional apps. The advanced scheduling system lets you define detailed scenarios based on the day of the week, hour, and even the second, which works well for automating lighting, ventilation, or garden watering, among other things.Compatibility with apps and systemsThe Shelly 1 Gen4 model works with many home automation systems. It supports HTTP API, MQTT(S), Webhooks, the UDP protocol, and virtual components. Additionally, it offers compatibility with the KNX net/IP system. Thanks to support for scripts in the ShellyScript language, it is possible to create custom rules and operational logic.Included Shelly x2 controller user manual General Manufacturer Shelly Model 1Gen4 Physical specifications Dimensions 37 x 42 x 16 mm / 1.46 x 1.65 x 0.63 inches Weight 26 g / 0.92 oz Maximum tightening torque for screw terminals 0.4 Nm / 3.5 lbin Wire cross-section 0.2 to 2.5 mm² / 24 to 14 AWG (solid, stranded, and sleeved wires) Stripped wire length 6 to 7 mm / 0.24 to 0.28 inches Mounting Wall mount Housing material Plastic Housing color Blue Terminal color Gray Environmental conditions Operating temperature -20°C to 40°C / -5°F to 105°F Operating humidity 30% to 70% RH Maximum altitude 2000 m / 6562 ft Electrical specifications Power supply 110–240 V~ ; 24–48 V= ; 12 V= Power consumption < 1 W Neutral wire required No External protection Overcurrent circuit breaker compliant with EN60898-1 (tripping characteristic B or C, rated current max. 16 A, minimum breaking capacity 6 kA, energy limitation class 3) Output circuit parameters Maximum switching voltage 240 V~ ; 30 V= Maximum switching current 16 A / 240 V~ ; 10 A / 30 V= Sensors and measurements Built-in temperature sensor Yes Wi-Fi Protocol 802.11 b/g/n RF band 2412 – 2472 MHz Maximum RF transmit power < 20 dBm Range Up to 30 m indoors / 100 feet and up to 50 m outdoors / 160 feet (depending on local conditions) Bluetooth Protocol 4.2 RF Band 2402 – 2480 MHz Maximum RF Transmit Power < 4 dBm Range Up to 10 m indoors / 33 feet and up to 30 m outdoors / 100 feet (depending on local conditions) Zigbee Protocol 802.15.4 Zigbee repeater function Yes RF band 2400 – 2483.5 MHz Maximum RF transmit power < 20 dBm Range Up to 100 m indoors / 328 ft and up to 300 m outdoors / 984 ft (depending on local conditions) Microprocessor Unit Processor ESP-Shelly-C68F Flash memory 8 MB Firmware features Number of schedules 20 Webhooks (URL actions) 20, with 5 URLs per webhook Script support Yes MQTT Yes

Konfigurācija: 1.0, Jauda (RMS): 4.2 W, Frekvenču diapazons: 90 - 20000 Hz, FM radio: Nav, Bezvadu savienojumi: Bluetooth, USB: Nav, 3.5 mm (AUX): Nav, Micro SD: Nav, Akumulatora darbības laiks (h): 7

Konfigurācija: 1.0, Jauda (RMS): 4.2 W, Frekvenču diapazons: 90 - 20000 Hz, FM radio: Nav, Bezvadu savienojumi: Bluetooth, USB: Nav, 3.5 mm (AUX): Nav, Micro SD: Nav, Akumulatora darbības laiks (h): 7

Konfigurācija: 1.0, Jauda (RMS): 4.2 W, Frekvenču diapazons: 90 - 20000 Hz, FM radio: Nav, Bezvadu savienojumi: Bluetooth, USB: Nav, 3.5 mm (AUX): Nav, Micro SD: Nav, Akumulatora darbības laiks (h): 7

Specifikacija: Spalvų valdymas - WRGB Šviesos srautas -  400 lm Matomos spalvos indeksas -  Ra80 Nominali įvestis -  220–240 V ~ 50/60 Hz, 0,45 A Belaidis ryšys -  WiFi IEEE 802.11 b/g/n 2.4GHz, Bluetooth 4.2 BLE Lempos įvestis - 12V，1A Galios koeficientas - 0,45 Nominali galia - 9 W (12 × 0,6 W / LED modulis + 6 × 0,3 W / LED modulis [RGB]) Darbinė temperatūra -  -10 ℃ ~ 40 ℃ Darbinė drėgmė: -  0%–85% RH Tarnavimo laikas - 25000 h Operacinė sistema -  Android 4.4 arba iOS 9.0

Carlinkit CP2A PRO Wireless AdapterThe Carlinkit CP2A PRO Wireless Adapter lets you convert your car’s factory-installed wired CarPlay into a wireless CarPlay and Android Auto system. Simply plug the device into your car’s USB port to enjoy navigation, music, calls, and apps without the need for a cable. The adapter supports 2.4 GHz and 5 GHz Wi-Fi and uses Bluetooth 4.2, ensuring a stable connection and smooth system operation while driving. The model is compatible with iPhones starting with the iPhone 6 running iOS 10 or later, as well as smartphones running Android 11 or later.Quick connection and convenience every dayThe Carlinkit CP2A PRO operates on a plug-and-play system, so setup takes only a moment and requires no additional software installation. After the initial pairing, the device automatically connects to your phone when you start the car, allowing you to begin driving and using multimedia faster. Wireless communication eliminates the need to constantly connect your phone with a cable, keeping the car’s interior tidier. The stable connection also ensures that maps, music, and calls work smoothly even during longer trips.Preserving the functions of the factory systemThe adapter is designed to work with the car’s original system and maintain control of the steering wheel buttons, knobs, and multimedia controls. This ensures that using wireless CarPlay or Android Auto remains intuitive and does not require changing your driving habits. The device also maintains the original resolution of the car’s system, ensuring a comfortable and clear user experience with apps. An additional advantage is the ability to simultaneously use wireless CarPlay or Android Auto and connect to an external Wi-Fi hotspot.Modern components and compact designThe Carlinkit CP2A PRO is equipped with a quad-core Cortex-A53 processor and runs Android 12.0, ensuring stable performance during daily use. The compact housing, made of ABS and PC materials, blends well with the car’s interior and doesn’t take up much space once connected. The adapter features a USB-A and USB-C port, allowing it to easily adapt to various in-car setups. Its low power consumption lets you use the device without overloading the car’s electrical system.OTA Updates and Convenient UseThe device supports OTA updates—wireless software updates that help improve the adapter’s compatibility and stability. This is a practical solution for those who want to use the device for an extended period without needing to replace the hardware. The set includes two cables—USB-A to USB-C and USB-C to USB-C—so the adapter is ready to use right out of the box.Included Carlinkit CP2A PRO adapter USB-A to USB-C cable USB-C to USB-C cable User manual Manufacturer’s packaging Manufacturer Carlinkit Model CP2A PRO System Android 12.0 Processor Quad Cortex-A53 Wi-Fi connectivity 2.4 GHz / 5 GHz Bluetooth 4.2 Compatibility Cars with factory-installed wired CarPlay iPhone Compatibility iPhone 6 and newer, iOS 10 or newer Android Compatibility Android 11 or newer Ports USB-A, USB-C Material ABS + PC Color Black Device Dimensions 80 × 46 × 13 mm Power Consumption 3.5 W Input Power 5V ±0.2V / 1.0A

Konfigurācija: 1.0, Jauda (RMS): 4.2 W, Frekvenču diapazons: 90 - 20000 Hz, FM radio: Nav, Bezvadu savienojumi: Bluetooth, USB: Nav, 3.5 mm (AUX): Nav, Micro SD: Nav, Akumulatora darbības laiks (h): 7