Bluetooth temperatūras sensors

Shelly 1 PM Gen4 Controller Zigbee/MatterThe Shelly 1PM Gen4 is a compact built-in switch with power metering that combines several wireless communication standards - Zigbee, Wi-Fi, Bluetooth and Matter. The device allows you to remotely control connected power consumers, and with accurate power measurement it allows you to analyze energy consumption in real time. Thanks to its small dimensions, it can be successfully installed in flush-mounted boxes, behind sockets or light switches.Full control in your handsThe controller can be operated locally via Wi-Fi or remotely via the Shelly app, a web browser or integration with home automation systems. The built-in web interface allows you not only to remotely turn devices on and off, but also to configure settings and read power consumption data. Remote access works anywhere the device has an Internet connection - no central hub is required. Shelly 1PM Gen4 offers extensive integration with external systems - it supports MQTT, HTTPS, Web Hooks, KNXnet/IP and scripts written in ShellyScript, among others. You can create schedules (up to 20 tasks) and scenes to automate devices based on time, days of the week or weather conditions.Multi-standard communicationThe Shelly 1PM Gen4 supports 4 major communication standards - Wi-Fi (802.11 b/g/n), Bluetooth 5.0, Zigbee (802.15.4) and Matter. This makes it seamlessly integrate with popular platforms such as Alexa, Google Assistant, Samsung SmartThings and Home Assistant. The controller can also act as a Zigbee and Wi-Fi signal repeater, strengthening the coverage of these networks in IoT installations.Measuring energy consumption and protecting the installationThe device features a built-in wattmeter and ammeter, allowing real-time monitoring of the power consumption of connected devices. In addition, the data record can be analyzed in the app. Measuring energy consumption makes it easier to optimize power consumption in the home or office. An integrated internal temperature sensor takes care of safety by protecting the device from overheating. General Manufacturer Shelly Model 1PMGen4 Physical parameters Dimensions 37 x 42 x 16 mm / 1.46 x 1.65 x 0.63 inches Weight 27 g / 0.95 oz Maximum terminal tightening torque 0.4 Nm / 3.5 lbin Cable cross section 0.2 to 2.5 mm² / 24 to 14 AWG (wire, wire, sleeve) Wire stripping length 6 to 7 mm / 0.24 to 0.28 in. Mounting Wall console Housing material Plastic Housing color Red Clamp color Gray Environmental conditions Operating temperature -20 °C to 40 °C / -5 °F to 105 °F Operating humidity 30% to 70% RH Maximum altitude 2000 m / 6562 ft Electrical parameters Power supply 110-240 V~ ; 24-30 V⎓ Power consumption < 1 W Neutral wire required Yes External protection Overcurrent circuit breaker according to EN60898-1 (characteristic B or C, rated current max. 16 A, breaking capacity min. 6 kA, energy limitation class 3) Sensors and measurements Voltmeter (AC) Yes Ammeter (AC) Yes Internal temperature sensor Yes Wi-Fi Protocol 802.11 b/g/n RF band 2412 - 2472 MHz RF power < 20 dBm Range Up to 30 m indoors / 50 m outdoors (depending on conditions) Bluetooth Protocol 5.0 RF band 2402 - 2480 MHz RF power < 4 dBm Range Up to 10 m indoors / 30 m outdoors (depending on conditions) Zigbee Protocol 802.15.4 Zigbee repeater Yes RF bandwidth 2400 - 2483.5 MHz RF power < 20 dBm Range Up to 100 m indoors / 300 m outdoors (depending on conditions) Microcontroller unit CPU ESP-Shelly-C68F Flash memory 8 MB Software functionality Schedules 20 Webhooks (URL shares) 20 with 5 URLs per webhook Scripts Yes MQTT Yes

Shelly Dimmer 0/1-10V PM Gen3 lighting controllerThe Shelly Dimmer 0/1-10V PM Gen3 is a versatile lighting controller that provides full control over the brightness and energy consumption in your home or office. With support for the 0/1-10V standard and integrated power monitoring features, the device offers precision and flexibility in managing different types of lighting. Optimized to work with popular automation platforms, the Shelly Dimmer Gen3 brings a new quality to everyday life - without the need for additional hubs.Seamless control over lightingThe Shelly Dimmer 0/1-10V PM Gen3 offers full control over light brightness, adjusting it to your current needs and preferences. With support for one-way and two-way dimming modes, the device works perfectly with both physical switches and automation systems. In addition, a built-in night mode allows the brightness to be automatically reduced during the evening hours, enhancing user comfort.Energy consumption monitoringOne of the key features of the Shelly Dimmer Gen3 is the ability to precisely monitor energy consumption. The controller displays data on voltage (V), amperage (A) and power (W), giving you a full view of the performance of connected devices. This feature allows you to better optimize power consumption and reduce operating costs.Smart automation and integrationThe Shelly Dimmer Gen3 controller is not only about managing lighting, but also integrating with advanced automation systems. With support for protocols such as KNXnet/IP and MQTT, the device is ideal for more demanding installations. Combine it with the Shelly Plus Add-On module to enrich functionality with additional sensors, such as humidity, temperature or light intensity measurements. Customizable thresholds and offsets make the device adaptable to individual user needs.ReliabilityEquipped with a new ESP Shelly processor and increased Flash memory, the controller features reliability, fast response and performance that meets the expectations of even the most demanding users. The Wi-Fi booster and BLE gateway features provide even better range and connection stability, while compatibility with popular platforms such as Alexa, Google Assistant and Home Assistant guarantees intuitive operation and versatile applications. Manufacturer Shelly Model 0/1-10VPMgen3 Dimensions 38.5 x 43.5 x 17 mm Weight 28,5 g Maximum tightening torque of screw terminals 0.4 Nm Cross section of wires From 0.2 to 2.5 mm² (solid conductors, stranded conductors and sleeve terminals) Length of stripped wire 5 to 6 mm Mounting In a wall console / behind a wall / in a ceiling structure Housing material Plastic Case color Pantone 2736C (blue) Color of connectors Black Operating temperature range From -20 °C to 40 °C Humidity 30% - 70% relative humidity Maximum installation altitude 2000 m Power supply 110-240 V~ 50/60 Hz Power consumption < 1,5 W No need for a neutral wire No Voltage control type 0-10V/1-10V Current source Short circuit strength 6 kA Energy limitation class 3 Maximum switching voltage 240 V~ Maximum switching current 13 A Maximum control current 35 mA Voltmeter (AC) 110 V - 240 V Voltmeter accuracy ±10% Ammeter (AC) 50 mA - 16 A Accuracy of the ammeter ±10% Power and energy measurement Active and apparent power, active and apparent energy, power factor (Power Factor) Measurement data storage No Built-in temperature sensor Yes Radio communication Wi-Fi range Up to 30 m indoors, up to 50 m outdoors (depending on local conditions) Bluetooth protocol 4.2 Bluetooth range Up to 10 m indoors, up to 30 m outdoors (depending on local conditions) Processor Shelly ESP32 C3 Clock frequency 40 MHz Flash memory 8 MB Schedules 20 Webhooks (URL shares) 20 (5 URLs per webhook) Script support Yes MQTT Yes Advanced scheduling Yes KVS (Key-Value Store) Yes

Shelly 1 Mini Gen3 Set of 2 ControllersDiscover a new dimension of control in your home with the Shelly 1 Mini Gen3! This small, smart controller offers the ability to remotely control devices right from your smartphone, tablet, computer or home automation system. It is so small that it will fit into standard electrical boxes, outlets, light switches and other space-constrained areas. It is equipped with a more powerful processor and larger memory, resulting in more efficient operation.Maximum performance in a compact form factorThe Shelly 1 Mini Gen3 is an upgraded version of the popular Shelly Plus 1 Mini, equipped with an advanced processor and increased memory. This makes the device perform even faster and more reliably. Its compact size allows for easy installation in standard wall boxes, behind electrical outlets or light switches, even where space is limited.Full control over appliancesControlling appliances is now easier than ever! Turn your appliances on and off remotely, automate their operation and enjoy the convenience that Shelly 1 Mini Gen3 provides, no matter where you are - all you need is an Internet connection. The controller is also compatible with popular home automation platforms, including Amazon Alexa, Google Smart Home and Samsung SmartThings, so you can manage your appliances by voice!Expand the scope of your networkWith the Shelly 1 Mini Gen3, you can also extend the range of your Wi-Fi network for IoT devices. This device acts as a signal booster, picking up Wi-Fi signals and amplifying them to cover a larger area. This ensures that your IoT devices will always stay connected.Your remote control centerThe device supports both Wi-Fi and Bluetooth 4.2, which means it can easily integrate into your existing ecosystem. It also acts as a BLE gateway, allowing communication between Shelly BLU devices and the Shelly ecosystem. What's more, with the ability to monitor humidity and temperature with the Shelly 1 Mini Gen3, you have full control over the environment in your home. You can adjust the parameters to your preferences for maximum comfort.Integrated solutionsWith the ability to create advanced schedules, you can program your electrical appliances to operate exactly as you need them to. Let the lights turn on at a specific time of day and the heating adjust to your schedule - Shelly 1 Mini Gen3 is ready to meet your expectations.IncludedShelly 1 Mini Gen3 x2 Manufacturer Shelly Model 1 Mini Gen3 Power supply 110 - 240 VAC Relay Dry, NO (normally open) contact, 1-pole, micro contact Power consumption < 1.2 W External protection Circuit breaker characteristics B or C, max. 10 A rated current, min. 6 kA short-circuit current circuit breaker, energy limitation class 3 Max. switching voltage 240 VAC, 30 VDC Max. switching current 8 A/240 VAC, 5 A/30 VDC Max. output power 2000 W/240 VAC, 150 W/30 VDC Internal temperature sensor Yes Wi-Fi communication protocol 802.11 b/g/n Wi-Fi range Up to 30 m indoors and 50 m outdoors Bluetooth wireless communication protocol 4.2 Bluetooth range Up to 10 m indoors and 30 m outdoors CPU ESP-Shelly-C38F Flash 8 MB Schedules 20 Webhooks (URL Actions) 20 with 5 URLs per action Scripts Yes MQTT Yes UDP Yes Advanced scheduling Yes KVS Yes Dimensions 29x34x16 ±0.5 mm Weight 19 ±1 g Conductor cross section 0.2 to 2.5 mm² / 24 to 14 AWG (solid, stranded and bootlace type insulation terminations) Length of exposed conductor 6 to 7 mm Mounting In a wall box Housing material Plastic Ambient operating temperature -20 °C to 40 °C Humidity 30 % to 70 % RH Maximum altitude. 2000 m

Shelly Temperature and Humidity SensorShelly BLU H&T; The ZB Display is a modern temperature, humidity, and light sensor equipped with a clear e-paper display and support for Zigbee 3.0 and Bluetooth 5.0. The device allows you to monitor indoor conditions in real time, making it easier to ensure the comfort of your household and maintain the right microclimate in your home or office. Its compact design, just 9 mm thick, makes the sensor look great on a wall, shelf, or desk. The built-in screen displays the current temperature, humidity level, ambient brightness, and a digital clock, allowing you to quickly check the most important information without using an app.24/7 monitoring of indoor conditionsThe sensor continuously monitors temperature, humidity, and light levels, helping to maintain comfortable conditions in various rooms. Excessive humidity can promote mold growth, while improper temperature affects well-being and the efficiency of heating or cooling. Thanks to real-time measurements, you can respond more quickly to changing conditions and better control your home environment. The e-paper display remains legible under various lighting conditions and consumes very little energy, allowing the device to operate for up to approximately 2 years on two CR2032 batteries.Smart home integrationThe Shelly BLU H&T; Display ZB works with devices using Zigbee 3.0 and Bluetooth 5.0, making it easy to integrate into a smart home. The sensor transmits data on temperature, humidity, and light intensity to compatible automation systems, enabling the creation of scenes and automations. However, additional actuators, such as relays or Shelly controllers, are required to control heating, air conditioning, ventilation, or lighting. The Zigbee standard ensures energy-efficient communication and leverages the stability of the mesh network created by other mains-powered Zigbee devices, which positively impacts connection reliability.Slim design and convenient installationThe device is designed for a discreet appearance and easy installation in various locations. The sensor can be placed on a shelf or desk using the stand, or mounted on a wall or metal surface thanks to built-in magnets and mounting hardware. Its compact dimensions make the device unobtrusive and ensure it blends well with modern interiors. The Shelly BLU H&T; Display ZB is ideal for the living room, bedroom, children’s room, or office, providing quick access to the most important information about environmental conditions. Manufacturer Shelly Model BLU H&T; Display Device type temperature, humidity, and light sensor Connectivity Zigbee 3.0, Bluetooth 5.0 LE Temperature measurement yes Humidity measurement yes Light intensity measurement yes Built-in digital clock yes Power supply 2 × CR2032 battery Estimated battery life up to approximately 2 years Communication range up to 10 m indoors / up to 30 m outdoors Operating temperature range from -10°C to 40°C Operating humidity 30% to 70% RH Housing material plastic Color black Mounting wall-mounted, on a shelf, or on a desk Dimensions 65 × 65 × 9 mm Weight 38 g

SONOFF ZigBee SNZB-02DR2 Temperature and Humidity Sensor 2-PackThe Sonoff AirGuard TH SNZB-02DR2 is a smart ZigBee temperature and humidity sensor with a large 3.6” LCD display that shows current conditions, daily highs and lows, and air comfort levels in real time. It combines laboratory-grade precision (±0.2°C / ±2% RH), modern wireless connectivity, and energy-efficient battery operation in a single, compact device. With it, you always know whether the room has a healthy microclimate—no guessing, no assumptions, no unnecessary complications.Clear and large 3.6” LCD screenThe clear, high-contrast display is designed so that the most important data is visible from a distance. A single glance is all it takes to check the temperature, humidity, min/max values from the last 24 hours, and the graphical comfort indicator. You don’t have to open an app or reach for your phone—the information is always at your fingertips, exactly when you need it.Precise, premium-class sensor—Sensirion SHT40At the heart of the device is the professional Sensirion SHT40 sensor, known for its use in industrial and measurement applications. It provides exceptionally stable and reliable readings, which translate into real benefits: better sleep conditions, healthier air for children, and protection for plants, food, and wine against excessive moisture. This is a device that measures accurately—because when it comes to comfort, there’s no room for chance.ZigBee 3.0 – Smart, Wireless AutomationThanks to ZigBee 3.0 connectivity, the sensor operates reliably, responds quickly, and consumes minimal energy. Once paired with the gateway, you can monitor data in the app, set alerts, and create automations—such as turning on a humidifier when the air is too dry or activating ventilation when humidity is too high. It’s a smart home that takes care of your comfort on its own before you even notice a problem.Data History and AnalyticsAirGuard TH records measurements and displays them as easy-to-read graphs, allowing you to track changes over time—with accuracy down to the minute. Daily, weekly, and multi-month statistics are available, as well as information on dew point and VPD. It’s a practical tool that helps you better plan ventilation, heating, and plant watering, and effectively prevent mold and excessive moisture.Works with your smart home systemThe sensor integrates seamlessly with popular platforms and hubs: Sonoff, Home Assistant, Zigbee2MQTT, SmartThings, as well as voice assistants like Alexa and Google Home, and the Matter Bridge ecosystem. You can check the temperature using voice commands, view data remotely, and turn devices on from anywhere. This gives you complete freedom and flexibility, regardless of your chosen ecosystem.Proximity Mode—use it even without a gatewayDon’t have a ZigBee hub? No problem. In Proximity Mode, you can connect directly to your smartphone via Bluetooth to check current parameters, calibrate the sensor, switch between °C and °F, or export data. It’s the perfect solution for those who want to start with simple monitoring and expand the system with automation later.Compact design and versatile useA slim housing made of durable PC+ABS, powered by two AAA batteries, and the option to stand it upright or hang it mean that the AirGuard TH fits literally anywhere—in a bedroom, a child’s room, a greenhouse, a pantry, a basement, a storage room, or an office. A wide operating range (-20°C to 60°C, 5–95% RH) ensures reliability in various conditions. This small device gives you great control over the comfort and safety of your environment every day.Included in the set ZigBee LCD Temperature and Humidity Sensor Sonoff AirGuard TH SNZB-02DR2 x2 User manual Manufacturer Sonoff Model SNZB-02DR2 (AirGuard TH) Device Type Smart Temperature and Humidity Sensor (ZigBee + Bluetooth) Wireless Connectivity ZigBee 3.0 (IEEE 802.15.4) + Bluetooth (Proximity Mode) Display 3.6" high-contrast LCD Data displayed on screen Current temperatureCurrent

Sakaru metode: Bluetooth 4.0 Galvenā vadības mikroshēma: MM32L073 Programmatūras platforma: Atbalsta Android /Windows/IOS Darba spriegums: 12V, darba strāva 32mA Darba temperatūra: 40℃~80℃ Darba mitrums: mazāk par 60% Iespējas: 1. Mazs izmērs, augstākā mikroshēmu integrācija, neatkarīgs izskata patents, derīguma modeļa patents un programmatūras autortiesības 2. Programmatūra var veikt šādas darbības: Nolasīt kļūdu diagnostikas kodus – vispārīgos un ražotāja specifiskos, un parādīt to nozīmi (datubāzē ir vairāk nekā 3000 bieži sastopamu kodu definīciju) Notīrīt kļūdas kodu un izslēgt MIL ("Check Engine" indikatoru) Parādīt pašreizējos sensoru datus, tostarp: motora apgriezienus minūtē (RPM), aprēķināto slodzes vērtību, dzesēšanas šķidruma temperatūru, degvielas sistēmas statusu, transportlīdzekļa ātrumu, īstermiņa degvielas stāvokli, ilgtermiņa degvielas stāvokli, ieplūdes kolektora spiedienu, degvielas iesmidzināšanas sākuma laiku, ieplūdes gaisa temperatūru, gaisa plūsmas ātrumu, absolūto droseles pozīciju, skābekļa noteikšanas spriegumu, kas saistīts ar īstermiņa degvielas statusu, degvielas sistēmas statusu, degvielas spiedienu, degvielas patēriņa uzraudzību un daudzus citus datus OBDII atbalstītie protokoli: 1. SAE J1850 PWM (41.6Kbaud) 2. SAE J1850 VPW (10.4Kbaud) 3. ISO9141-2(5 baud init, 10.4Kbaud) 4. ISO14230-4 KWP (5 baud init, 10.4 Kbaud) 5. ISO14230-4 KWP (fast init, 10.4 Kbaud) 6. ISO15765-4 CAN (11bit ID, 500 Kbaud) 7. ISO15765-4 CAN (29bit ID, 500 Kbaud) 8. ISO15765-4 CAN (11bit ID, 250 Kbaud) 9. ISO15765-4 CAN (29bit ID, 250 Kbaud) Programmatūras platforma: 1. Saderīga programmatūra Windows versija: ScanMaster-ELM, ScanTool.net, PCMSCAN, utt.; Android versija: Torque, DashCommand, OBD Car Doctor, Auto Doctor, Mini OBDII, EOBD, utt.; Symbian versija: OBDScope iOS: Torque 2. Saderīgas platformas Programmatūras atbalsta platforma: Windows XP, Windows 7/8/10, Android, Symbian un citas sistēmas Produkta izmērs: 57x46.2x24.2mm Iepakojuma izmērs: 100x63x25.5mm Svars: 38g