Canon R7

Patogus fotografavimas ir filmavimas„Mantis RC M1“ pultelio mygtukai leidžia valdyti įrangą iki 10 m atstumu. Jis suderinamas su „Sony“, „Canon“, „GoPro“ įrenginiais ir „MantisPod 2.0“ trikojais. Vienu įkrovimu veikia iki 11 valandų.Įrangos valdymas per atstumąGalima artinti ir tolinti vaizdą, fotografuoti bei pradėti vaizdo įrašymą. Indikatoriai rodo ryšio su įranga būseną ir akumuliatoriaus įkrovą. Darbinė įtampa – 3,7 V.Patvari konstrukcija ir ilgas veikimas60 mAh akumuliatorius užtikrina iki 11 val. veikimą, o įkrovimas trunka mažiau nei 80 min. Pultelis įkraunamas per USB-C jungtį. PC ir ABS medžiagos užtikrina patvarumą; darbinės temperatūros intervalas – nuo –10 iki 45 °C.Platus suderinamumasPultelis skirtas įvairiems populiariems „Sony“, „Canon“ ir „GoPro“ fotoaparatams bei kameroms, taip pat „MantisPod 2.0“ trikojams. Belaidis valdymas padeda patogiai kurti nuotraukas ir vaizdo įrašus.Specifikacijos Gamintojas PGYTECH Modelis P-CG-082 Sony suderinamumas Alpha 1, Alpha 7C, Alpha 7R IV, Alpha 7R III, Alpha 7S III, Alpha 9, Alpha 6600, Alpha 6100, Alpha 7 III (A7M3), Alpha 7 IV (A7M4), Alpha 6400, ZV-1, DSC-RX0M2, DSC-RX100M7, FX3, ZV-E10 Canon suderinamumas EOS M6 Mark II, EOS M50, EOS M50 Mark II, EOS M200, PowerShot G5 X Mark II, PowerShot G7 X Mark III, EOS R, EOS R5, EOS R6, EOS R7, EOS RP Kitas suderinamumas GoPro 5 / 6 / 7 / 8 / 9 / 10 / 11; MantisPod 2.0 trikojai Veikimo nuotolis Iki 10 m Akumuliatorius 60 mAh Įtampa 3,7 V Jungtis USB-C Įkrovimo trukmė Mažiau nei 80 min. Veikimo trukmė Iki 11 val. Darbinė temperatūra –10–45 °C Medžiagos PC, ABS Svoris 10 g

Kiwi Long Camera Eyecup For Canon EOS R7 KE R7

Replacement Battery LP-E6P, 2400mAh.  Features:  No "memory effect". Low self-discharge rate. Longest battery life.  Compatible camera models:  Canon EOS R5 Mark II. Canon EOS R6 Mark II. Canon EOS 5D Mark III. Canon EOS 5D Mark IV. Canon EOS 6D Mark II. Canon EOS 7D Mark II. Canon EOS R5. Canon EOS R6. Canon EOS R7. Canon EOS R. Canon EOS Ra. Canon EOS 70D. Canon EOS 80D. Canon EOS 90D. Canon EOS 5D R. Canon EOS 6D. Canon EOS 60Da. Canon EOS 60D.  Compatible part numbers:  LP-E6P.  Notes: the list of compatible models may not be complete. In case of doubt, always ask a consultant for advice.  Specifications:  Capacity: 2400mAh, 17.8Wh. Element type: Li-ion. Voltage: 7.4V.  Important information! Waste batteries and accumulators must be discard to special containers marked with a battery and/or accumulator collection mark.  Warranty: 12 months.

SmallRig 5407 Camera Battery for Canon LP-E6P OrangeIt adopts a high current solution with a charging voltage of 5V and a maximum charging current of 2A, enabling a fast full charge in just 2.5 hours. With a real capacity of 2520mAh, it provides lasting battery life. The use of a fully decoded chip ensures compatibility with Canon LP-E6P, no pop-up alerts during usage, full compatibility with original devices like EOS R5 II, supports camera power display, and also supports charging with the original charger. The exterior features a unique new color scheme for a distinctive look. The shell is made of high-quality ABS+PC fire-resistant material, which is heat-resistant, safe, reliable, and durable. The size of the battery is the same as the original camera battery, fitting tightly in the camera battery compartment, ensuring no jamming during installation.Certifications: FCC /CE /RoHS /ISED /KC/RCMCompatibility:Canon EOS 5D Mark II / 5D Mark III / 5D Mark IV / 6D / 6DMark II / 7D / 7DMark II / 60D / 60Da / 70D / 80D / 90D / XC10 / XC15 / 5DS / 5DSR / R / R5 / R6 / R5C / R7 / R6 Mark II / R5 Mark II*There are too many compatible models to be listed. Please refer to their battery typePackaging includes:LP-E6P Camera BatteryBattery Cover0.6m USB-A to USB-C Charging CableUser Manual

K&F Concept Canon LP-E6NH Camera Battery Kit with 2 × 2600mAh batteries and dual-slot LCD charger featuring Type-C & Micro-USB inputs for fast, safe charging. The K&F Concept Canon LP-E6NH battery kit includes two high-capacity 2600mAh (18.72Wh) batteries, providing extended power for uninterrupted shooting during long sessions. Designed for Canon EOS R5, R6, R7, 5D Mark IV, 6D Mark II, 7D Mark II, 90D, 80D, and other LP-E6NH/LP-E6N/LP-E6 compatible cameras, these batteries ensure reliable performance for professional photography and videography. The kit comes with a dual-slot smart LCD charger capable of charging two batteries simultaneously. The LCD display clearly shows the real-time charging status of each battery, allowing you to monitor your power at a glance. Compact and lightweight (9 × 5.6 × 2.2 cm, 46.1 g), the charger is easy to carry for travel or field work. For versatile charging, the charger supports dual input via Type-C and Micro-USB, compatible with USB wall adapters, car chargers, laptops, mobile power banks, and more. Multiple safety protections ensure overcharge, over-current, and short-circuit safety for your batteries. Package Includes: 2 × LP-E6NH Batteries (2600mAh, 7.2V, 18.72Wh) 1 × Dual-Slot LCD Battery Charger 1 × USB-C Charging Cable Key Features: 2 × high-capacity Canon LP-E6NH batteries, 2600mAh Compatible with Canon EOS R5, R6, R7, 5D IV, 6D II, 7D II, 90D, 80D Dual-slot LCD charger for simultaneous charging Real-time battery status display on LCD screen Dual input: Type-C & Micro-USB for versatile charging Compact and lightweight for portability Multiple safety protections

The SmallRig Cooling Fan for Mirrorless Cameras is a compact, high-speed cooling solution designed to prevent overheating during extended video recording. Featuring a 7000rpm fan, dual cooling modes, and a built-in 1100mAh battery with up to 180 minutes runtime, it attaches securely via a snap-in spring-loaded mount. Compatible with popular Sony and Canon mirrorless cameras, it helps maintain stable performance during demanding shoots. The SmallRig Cooling Fan for Mirrorless Cameras is engineered for creators who shoot long-form video and need reliable thermal management. Designed to attach directly to compatible camera bodies via a spring-loaded snap-in mounting system, it activates when the rear LCD is flipped out, ensuring a secure and ergonomic fit without interfering with operation. At its core, the unit uses a high-speed 7000rpm fan to rapidly dissipate heat, reducing the risk of overheating during 4K recording, live streaming, or extended shooting sessions. It features two adjustable cooling modes, allowing users to balance noise, performance, and environmental conditions depending on shooting requirements. A built-in 1100mAh rechargeable battery powers the fan for up to 180 minutes on a single charge, while a 4-stage LED indicator provides real-time battery status. The fan is powered via a USB-C input (5V/2A), making it easy to recharge with standard modern chargers or power banks. Key Features High-speed 7000rpm cooling fan for rapid heat dissipation Dual adjustable cooling modes for different shooting environments Up to 180 minutes battery life (1100mAh built-in battery) Spring-loaded snap-in mounting system for secure attachment 4-stage LED battery indicator USB-C charging input (5V/2A) Lightweight and compact design for portable use Compatibility Sony FX3, FX30 Sony a7 IV, a7S III, a7C, a7C II, a7CR, a6700 Sony ZV-E1, ZV-E10, ZV-E10 II, ZV-1, ZV-1F Canon EOS R5, R5 Mark II, R6 Mark II, R7 1 × SmallRig Cooling Fan for Mirrorless Cameras Fan speed: 7000rpm Battery capacity: 1100mAh Runtime: up to 180 minutes Power input: USB-C, 5V/2A Power consumption: 2W Operating current: 0.2A / 0.4A Material: PC, aluminum alloy Dimensions: 85 × 50.8 × 25 mm Weight: 85 g Operating temperature: 0–45°C

The K&F LP-E6NH 2600mAh Battery Pack with Type-C Fast Charging for Canon cameras is designed to keep your photography sessions uninterrupted. With a powerful 2600mAh capacity, these batteries ensure you can capture beautiful sceneries without worry. The convenience of Type-C fast charging allows you to connect the battery directly to a power adapter using the included cable, fully charging in about 2 hours without needing an extra charger. These fully decoded replacement batteries are compatible with a wide range of Canon cameras, including EOS 90D, 80D, 70D, 5D Mark II, III, IV, 5DS, SR, 6D, 6D Mark II, R5, R6, R6 II, and R7, with no pop-up warnings. Multiple charging options include USB wall chargers, car chargers, and power banks, offering flexibility and reliability with six types of protection: temperature, over-voltage, over-discharge, over-current, over-charge, and short-circuit. The premium design features a charging indicator that shows red when charging and green when fully charged. Powerful Capacity: 2600mAh battery for extended use. Type-C Fast Charging: Direct charging with included cable, fully charges in about 2 hours. Fully Decoded: No pop-up warnings on compatible Canon cameras. Multiple Charging Options: Compatible with USB wall chargers, car chargers, power banks, and LP-E6NH chargers. Comprehensive Protection: Includes temperature, over-voltage, over-discharge, over-current, over-charge, and short-circuit protections. Premium Design: Exquisite exterior with a charging indicator for easy status monitoring. PreviousNext

Komplekts ar diviem 2600mAh akumulatoriem un divu slotu LCD lādētāju, saderīgs ar Canon EOS R5, R6, R7 un citiem modeļiem.

K&F Concept 2400mAh LP-E6P 2-Pack Battery and Dual Slot USB Charger Compatible with EOS R5 Mark II, R5, R62, R6, R7. * 【2400mAh LP-E6P Batteries】2 pack LP-E6P batteries with 2400mAh capacity, give more power to support extended shooting when you're on the go. The Battery and charger set are compact and lightweight for easy portability. Ship to GR, LT, LU, DE, EL, HU, LV, IE, IT, CN, UK, US, NL, PL, PT, RO, SI, SK, SE, ES, FR, FI, EE, DK, CZ, BE, AT, AU, HK, BY, BR, BG, CA, MX, NZ, RS, CH, UA, GB, IL. * 【Compatible】Upgraded LP-E6P replacement battery compatible with Canon EOS R5 Mark II, EOS R6 Mark II, EOS R8, EOS R7, EOS R6, EOS R5, EOS 90D, EOS RF, EOS 5D Mark IV, 5D Mark III, 5DS, 5DS R, 5D Mark II, 6D, 6D Mark II, 7D, 7D Mark II,90D, 80D, 70D, 60D. * 【LCD Display USB Charger】The Dual Slot USB charger can charge two LP-E6P batteries at the same time, the LCD screen shows the charging status of each battery. * 【Various Ways of Charging Battery】With Micro USB and Type-C dual input port, can be charged directly using mobile power, wall charger, car charger, portable charger or other. * 【Full decode】Fully decode the battery, suitable for original battery and charger. PreviousNext PreviousNext

The SmallRig Hybrid Cooling Fan for Mirrorless Cameras is an advanced thermal management accessory designed for extended video recording sessions. Featuring a 7000rpm high-speed fan combined with a TEC cooling module, three adjustable cooling modes, and a built-in 2200mAh battery, it helps prevent overheating while maintaining stable camera performance during demanding shoots.  The SmallRig Hybrid Cooling Fan for Mirrorless Cameras is built for professional creators who require reliable heat control during long recording, streaming, or high-resolution video capture sessions. Unlike standard cooling fans, this hybrid version integrates both a 7000rpm high-speed fan and a TEC (thermoelectric cooling) module, delivering enhanced and more efficient heat dissipation to keep compatible cameras operating at optimal temperatures. It features three adjustable cooling modes, allowing users to fine-tune performance based on environmental conditions, noise tolerance, and workload intensity. This flexibility makes it suitable for both indoor studio setups and outdoor shooting environments. Powered by a built-in 2200mAh rechargeable battery, the unit provides up to 70 minutes of continuous operation. A 4-stage LED indicator clearly displays remaining battery life, ensuring users can manage power effectively during production. The fan recharges via a USB-C input (5V/2A), making it compatible with modern charging systems and power banks. The snap-in spring-loaded mounting design allows for quick, tool-free attachment to supported mirrorless cameras when the LCD screen is flipped out, ensuring a secure fit without obstructing camera operation. Key Features Hybrid cooling system with 7000rpm fan + TEC module Three adjustable cooling modes for different shooting conditions Built-in 2200mAh battery with up to 70 minutes runtime Spring-loaded snap-in mounting system 4-stage LED battery level indicator USB-C charging input (5V/2A) Designed for extended video recording and overheating prevention Compatibility Sony FX3, FX30 Sony a7 IV, a7S III, a7C, a7C II, a7CR, a6700 Sony ZV-E1, ZV-E10, ZV-E10 II, ZV-1, ZV-1F Canon EOS R5, R5 Mark II, R6 Mark II, R7 1 × SmallRig Hybrid Cooling Fan for Mirrorless Cameras Fan speed: 7000rpm Cooling system: Fan + TEC module Battery capacity: 2200mAh Runtime: up to 70 minutes Power input: USB-C, 5V/2A Power consumption: 7W Operating current: 0.2A–1.4A Material: PC, aluminum alloy Dimensions: 85 × 50.8 × 32.8 mm Weight: 130 g

Šis objektyvo adapteris suderinamas su "Canon" EF/EF-S objektyvu, pritaikytu RF fotoaparatui, suderinamas su Canon EOS R Ra RP R3 R5 R5C R6 R6 Mark II R7 R8 R10 ir R50. Išlaikomos visos funkcijos - elektriniai kontaktai išlaiko greitą automatinį fokusavimą, automatinį diafragmos valdymą, vaizdo stabilizavimą ir kitas objektyvo funkcijas, o EXIF duomenys perduodami į fotoaparatą. Patvari metalinė konstrukcija - priekinėje ir galinėje dalyje esantys metaliniai laikikliai yra patvarūs ir nelūžta, todėl puikiai išlaiko svorį: 4,4 lb/2 kg. Lygūs sriegiai puikiai pritvirtina objektyvą ir fotoaparato korpusą, tarsi jie būtų natūraliai prigludę. Oro sąlygoms atspari konstrukcija - šis adapteris pagamintas pagal tokius pat griežtus standartus kaip ir fotoaparatas, todėl gali atlaikyti lietų, dulkes ir kitas atšiaurias oro sąlygas. SPECIFIKACIJOSModelis: NW-EF-EOSR Suderinami objektyvai: EF/EF-S serijos objektyvai Suderinami fotoaparatai: EOS RF tvirtinimo kameros Priekinis montavimas: EF/EF-S objektyvai Galinis montavimas: EOS RF tvirtinimo kameros Fotoaparato laikiklio išorinis skersmuo: 50 mm Objektyvo laikiklio išorinis skersmuo: 65 mm Gamintojas: Neewer Spalva: juoda Ilgis: 29 mm Svoris: 175 g

SmallRig 5409 Camera Battery and Charger Kit for Canon LP-E6PEach battery delivers a true-rated output of 2520mAh, providing extended shooting time for demanding workflows. The charger is equipped with two independent slots, allowing for the simultaneous charging of two batteries or a single battery, optimizing efficiency for multi-battery setups. An intelligent LCD display provides real-time monitoring of charging current, charging voltage, charge progression and accumulated power input. Additionally, the charger incorporates both USB-A and USB-C input ports, making it compatible with wall adapters, car chargers, and power banks for versatile charging options.Certifications: FCC, CE, RoHS, ISEDBattery Specifications:Cell Nominal Capacity: 2520mAhNominal Voltage: 7.2VRated Capacity: 2520mAhRated Energy: 18.144WhCharge Limit Voltage: 8.4VMaximum Discharge Current: 6ADischarge Cut-off Voltage: 5VCharger Specifications:USB-A Input: 5V⎓2.1AUSB-C Input: 5V⎓2.1AOutput Voltage: 8.4VOutput Current: 1AOperating Temperature: 0°C to 40°C Compatibility:Canon EOS 5D Mark II / 5D Mark III / 5D Mark IV / 6D / 6DMark II / 7D / 7D Mark II / 60D / 60Da / 70D / 80D / 90D / XC10 / XC15 / 5DS / 5DSR / R / R5 / R6 / R5C / R7 / R6 Mark II / R5 Mark IIPackaging includes:2x LP-E6P Camera Battery2x Battery CoverE6P-BR26 Camera Battery ChargerUser Manual