Computer Power Supply

USB 3.2 Gen 2x2 Dual M.2 NVMe SSD Enclosure with Clone Feature. The Lindy USB 3.2 Dual M.2 NVMe SSD Enclosure allows the user to install two PCIe/NVMe based M.2 SSDs as an external drive to USB hosts like laptops or PCs. The additional Clone feature enables duplicating M.2 NVMe SSDs - even without connection to a computer ("offline cloning"). Support for the USB 3.2 Gen 2x2 standard guarantees SuperSpeed 20Gbps data transfer rates. UASP support also ensures faster speeds for UASP enabled computers. This Lindy enclosure is compatible with PCIe/NVMe based M.2 SSDs with M key in 42, 60 and 80mm lengths. The tool-free design makes installation very easy. An included external power adapter guarantees safe power supply.

MPG GUNGNIR 300P AIRFLOW housing One-piece front panel with 1 mm perforation, possibility of mounting two 360 mm AIO water cooling system radiators, one at the front, the other at the top, working in a push-pull configuration. Optimized airflow in the case and improved airflow around M.2 SSDs. Full support for high-end graphics cards, the ability to mount them both vertically and horizontally, and enough space for good cooling air circulation and cable management. Omni-directional graphics card bracket that allows for the installation of various types and models of graphics cards and their mounting in many ways. Patented housing design that facilitates the installation of components for people who assemble their own computer. Pre-installed PWM fans, 4 x 120 mm, 1 x 80 mm, 2 x 60 mm, and included PCIe 4.0 riser cable. Possibility of mounting E-ATX (280 x 305 mm), ATX, Micro-ATX and Mini-ITX motherboards and graphics cards up to 360 mm long in the case. Connectors: 1 x USB 3.2 Gen 2x2 Type-C (20 Gbit/s) and 2 x USB 3.2 Gen 1 Type-A ports (5 Gbit/s).

Uni-T UT612 LCR MeterThe Uni-T UT612 LCR Meter is an advanced measurement tool designed for accurate testing of inductance, capacitance, and resistance over a wide range—from 20 µH to 2000 H, 200 pF to 20 mF, and 20 Ω to 200 MΩ. The device operates at five test frequencies (100 Hz, 120 Hz, 1 kHz, 10 kHz, and 100 kHz), offering series and parallel measurement modes and support for parameters such as L, C, R, DCR, Q, D, θ, and ESR. Thanks to its high accuracy, automatic LCR component recognition, and a USB interface capable of storing up to 60,000 results, the UT612 is ideal for use on production lines, in component inspection, and in electronics repair.Extensive measurement functionsThe meter offers not only basic LCR measurements but also more advanced options, such as measuring the quality factor, loss, or phase angle. The comparison function and deviation measurement help quickly assess whether a given component falls within the specified tolerances, which speeds up quality control and diagnostics. Thanks to the USB interface, the meter can be connected to a computer and up to 60,000 measurement results can be saved. This solution is particularly useful where long-term data documentation and analysis are important. The automatic shut-off feature helps conserve battery life, and the low-battery indicator (≤6.8 V) prevents unexpected interruptions. The device can be powered by either a 9V battery or via USB, offering greater flexibility. The kit includes, among other things, an SMD probe, a USB cable, and software, so the meter is ready to use right out of the box.Included Battery SMD probe USB cable Multifunction socket User manual Manufacturer Uni-T Model UT612 Inductance 20 µH ~ 2000 H (±0.5% + 5) Capacitance 200 pF ~ 20 mF (±0.5% + 5) Resistance 20 Ω ~ 200 MΩ (±0.3% + 5) Supported parameters L, C, R, DCR, Q, D, θ, ESR Test frequencies 100 Hz, 120 Hz, 1 kHz, 10 kHz, 100 kHz Test voltage 0.6 Vrms Display LCD (40 × 63 mm) Counts 20,000 D/Q counts 2,000 D/Q resolution 0.001 Power supply 9V battery (6F22) or USB power Dimensions 96 × 193 × 47 mm Weight 374 g

ANMITE A185W03 18.5" Portable MonitorThe ANMITE A185W03 portable monitor, featuring an 18.5-inch IPS screen, delivers Full HD 1920 × 1080 resolution, a 120 Hz refresh rate, and 100% sRGB color coverage, ensuring that displayed content is smooth, detailed, and accurately reproduces colors. Its slim design, just 1.3 cm thick and weighing 1.2 kg, makes it easy to transport, and its broad compatibility with laptops, smartphones, game consoles, and computers makes it ideal for both work and entertainment.Smooth Image and Wide Viewing AnglesThe 18.5-inch IPS LED-backlit screen offers a resolution of 1920 × 1080, a refresh rate of 120 Hz, and a brightness of 300 cd/m². Thanks to 100% sRGB color space coverage, the image stands out with natural colors, and the wide 178° viewing angles allow you to comfortably view content from various positions. The narrow bezels further increase the viewing area and enhance the comfort of using the monitor.One Monitor for Multiple DevicesThe ANMITE A185W03 works with laptops, desktop computers, smartphones equipped with a USB-C port, Nintendo Switch, PS4, PS5, and Xbox One consoles, as well as Android TV Box devices. It also supports Huawei EMUI PC and Samsung DeX modes, allowing your smartphone to function as a computer when connected to an external keyboard and mouse. The monitor also enables reverse charging for compatible devices.Greater convenience for work and entertainmentThe monitor can serve as a secondary screen for a laptop, making it easier to work on two displays simultaneously. It’s also great for watching movies, live streams, and playing console games. Nintendo Switch users can enter TV mode without using a dock, and the monitor also supports reverse power delivery to the console.Slim design and a wide range of portsThe ABS plastic housing measures 42.3 × 25 × 1.3 cm and is just 0.6 cm thick at its thinnest point. The monitor is equipped with two USB-C ports, a Mini HDMI connector, and a 3.5 mm audio jack, making it easy to connect multiple devices. The built-in stereo speakers deliver clear, balanced sound, and a Power Delivery adapter with at least 30 W of power is recommended for powering the monitor.Included in the box Monitor x1 USB-A to USB-C power cable x1 HDMI to Mini HDMI cable x1 USB-C to USB-C cable x1 User manual x1 Manufacturer ANMITE Model A185W03 Screen diagonal 18.5" Panel Type IPS LED Backlit Resolution 1920 × 1080 Refresh Rate 120 Hz Brightness 300 cd/m² Color Gamut Coverage 100% sRGB Viewing Angle 178° Dimensions 42.3 × 25 × 1.3 cm Viewing Area Dimensions 41 × 23 cm Thickness 0.6–1.3 cm Weight 1.2 kg Housing Material ABS plastic Speakers Stereo Ports 2 × USB-C Ports 1 × Mini HDMI Ports 1 × 3.5 mm audio jack Recommended Power Supply Power Delivery 30 W or higher Compatibility USB-C smartphones, laptops, desktop computers, Nintendo Switch, PS4, PS5, Xbox One, Android TV Box

Peladn S-1 Thunderbolt 3 Docking StationThe Peladn S-1 Thunderbolt 3 is an external eGPU docking station that significantly boosts the graphics capabilities of a compatible laptop or desktop computer equipped with a Thunderbolt 3 port. With a bandwidth of up to 40 Gb/s, support for external graphics cards, and the option to use your own ATX or SFX power supply, you can create a setup tailored to your needs and budget. The compact design, measuring 253 × 162 × 41 mm, ensures the dock takes up minimal space while offering extensive expansion options.Turn your laptop into a powerful gaming platformConnecting the dock to your computer via Thunderbolt 3 lets you instantly harness the power of a dedicated graphics card. This is the solution for those who want to significantly improve their laptop’s graphics performance without having to buy a large and heavy gaming PC. Thanks to this, even lightweight and portable devices can handle demanding AAA games and tasks that require high GPU computing power.Freedom to choose componentsOne of the biggest advantages of the Peladn S-1 is the ability to select both the graphics card and the power supply yourself. The dock is compatible with ATX and SFX power supplies, allowing you to easily tailor the configuration to your own requirements. It supports most graphics cards available on the market, including the NVIDIA RTX 40 and AMD RX 7000 series. For RTX 40 cards, it is recommended to use a power supply compliant with the ATX 3.0 standard.Open design for effective coolingThe Peladn S-1 features an open design that facilitates component installation and ensures efficient heat dissipation. This design promotes better ventilation compared to many traditional eGPU stations, resulting in stable operation under heavy load. Open access to components also makes it easier to upgrade and replace parts.Memory and connectivity expansionThe station offers additional expansion options thanks to an M.2 2280 NVMe slot supporting drives with capacities up to 2 TB. A 1000M Gigabit Ethernet port is also available, providing a stable wired network connection. This solution enhances the workstation’s functionality and allows for convenient use of both high-speed storage and wired internet.Included Peladn S-1 eGPU docking station USB 4.0 cable Screwdriver Installation manual Manufacturer Peladn Model S1 Interface Thunderbolt 3 x2 (60 W + 15 W) Bandwidth 40 Gb/s Network port Gigabit Ethernet 1000M x1 Drive slot M.2 2280 NVMe (up to 2 TB) x1 Supported power supplies ATX / SFX Supported graphics cards Most available graphics card models Recommended AMD cards RX570 or newer Recommended NVIDIA cards GTX1060 or newer Support for NVIDIA RTX 40 series cards Yes (with ATX 3.0 power supply) AMD RX 7000 series support Yes Dimensions 253 × 162 × 41 mm System requirements Windows 10 64-bit, macOS 10.13.4 or newer (AMD card support) Computer requirements Thunderbolt 3 port with external graphics card (eGPU) support

Uni-T UT512 High-Voltage Insulation Resistance TesterThe Uni-T UT512 High-Voltage Insulation Resistance Tester is an advanced measuring device designed for diagnosing electrical installations and large machinery, such as transformers, generators, and high-voltage motors. It offers a wide range of test voltages up to 2500 V, insulation resistance measurement up to 100 GΩ, as well as PI and DAR functions that help assess the condition of insulation over time. Thanks to the built-in memory, it is possible to save up to 18 sets of results, which can then be transferred to a computer via USB. The included software enables data analysis, which is particularly useful for regular inspections and documenting the condition of the installation. A large, high-resolution screen with a 30-segment bar graph allows you to quickly assess the result without having to analyze the numbers in detail. The backlight facilitates work in low-light conditions, and the intuitive operation makes the device suitable for use both in the field and in the workshop.Included in the set Uni-T UT512 Insulation Resistance Tester Red test lead (two-pin) with alligator clip Test leads (single-pin) with alligator clips (2 pieces) AC adapter USB cable CD with PC software Battery set (8 × 1.5V LR14) Manufacturer Uni-T Model UT512 Test voltages 500 V, 1000 V, 2500 V Insulation resistance measurement range up to 100 GΩ Measurement accuracy up to ±(3%+5) (depending on range) Data memory 18 sets Display 9999 with analog bar graph (30 segments) Features Continuous measurement mode, auto power off, LCD backlight, automatic current discharge Power supply 8 × 1.5V battery (LR14) Dimensions 202 × 155 × 94 mm Weight approx. 1.8 kg Certifications CE, UKCA

Longer Ray5 miniS laser engraver (3.5 W)Do you create small items, markings, decorations, or your first handmade products at home? The Longer Ray5 miniS laser engraver allows you to engrave materials without direct exposure to the laser beam. The 3.5 W device is pre-assembled and ready to use right out of the box, so instead of wasting time on assembly, you can start your project right away. The 130 × 140 mm working area and speed of up to 12,000 mm/min allow you to work comfortably on your desk, workbench, or in a small studio.Details that look like they came from a professional workshopA 0.04 × 0.04 mm laser spot and 0.04 mm engraving accuracy allow you to reproduce fine lines, small letters, and subtle patterns without blurring the edges. Thanks to the 2 mm spacer block, focusing is mechanical and repeatable – you lower the module to contact the block and you can be sure of the correct focus. In practice, this means a clean engraving contour on wood, leather, or acrylic without trial and error for each material. Even small jewelry items, key chains, or nameplates retain the sharpness of detail that is often lost with weaker lasers. This precision allows you to sell or give away the finished product without corrections.Projects you can finish in one sessionA speed of up to 12,000 mm/min combined with a 130 × 140 mm field allows you to complete most small DIY projects in a short time. You can engrave a series of key rings, coasters, or product labels in a single work session instead of spreading the work over several days. This scale is well suited to handmade creators and micro-sellers who operate in small quantities. The compact work area also promotes optimal use of material. With the Longer Ray5 miniS, the creation process remains fast and predictable.Personalization on hundreds of materials – from idea to productThe 3.5 W 450 nm diode laser allows you to engrave over 300 materials and, depending on their thickness, also cut them, from wood and leather to acrylic, metal, and ceramics. You can mark products, create decorations, personalize gifts, or prepare elements for further assembly. The Longer Ray5 miniS is suitable for a variety of applications, so you don't have to invest in multiple tools for different materials. This is especially important when you are creating at home and your workspace is limited.Freedom of engravingUSB and Wi-Fi connectivity and support for mobile apps and LaserGRBL or LightBurn software on Windows, macOS, Linux, Android, and iOS allow you to prepare your project on your computer or directly on your smartphone. Once the file is uploaded, the device can work offline, so you don't need to maintain a constant connection or occupy your computer while engraving. You can prepare your project at your desk and start the job later in your workshop or another room. Stable data transmission minimizes the risk of interrupting the task in progress.Stress-free workThe enclosure with a cover, door sensor, axis limit switches, and emergency stop button form a safety system characteristic of Class I devices. If the cover is opened, the work is interrupted and the mechanics stop in a controlled manner. An exhaust fan removes fumes from the working chamber, improving comfort when working in a closed room. This design allows you to engrave at home or in a small studio without direct exposure to the beam or moving parts.Quick start to creationThe aluminum alloy body, weighing 2.89 kg and measuring 307 × 320 × 197 mm, makes the device easy to place on a desk or move between workstations. Pre-assembly means that once you connect the power supply and data cable, you can get started on your first project right away. The kit includes safety glasses, a focus block, tools, and accessories needed to get started, so you don't have to buy equipment separately. This is especially convenient when you're just starting out with lasers.Included: Machine frame Laser module Power supply Data cable Safety glasses Focusing block Wre

SkyRC T1000 Maestro chargerSkyRC T1000 Maestro is a new, incredibly powerful RC model charger that stands out with up to 450W (AC) or even 1000W (DC). It uses an advanced Arm Cortex-M4 core and is equipped with a color display that will provide you with the most important information regarding its operation. It allows you to use 2 ports at the same time, and you will have no problem transporting it. Special Charger Master software is also available, which provides even more capabilities.Reliable performancePush the limits with the SkyRC T1000 charger and get more options for your next RC race. The product supports advanced DSP technology and has a state-of-the-art Arm Cortex-M4 core, which also uses a coprocessor (FPU). As a result, it can deliver incredible speed, performance and reliability! Bet on proven solutions and choose a charger that works in almost every situation.Even faster chargingEnjoy even faster charging. The charger is equipped with 2 ports that will allow you to charge 2 batteries simultaneously in a short time. You can also choose between AC and DC input. In AC mode, the charging power reaches 450W, and in DC mode it is up to 1000W! This will charge your batteries up to 9 times faster (in AC mode) or up to 20 times faster (in DC mode) than with standard chargers.Intelligent power distributionWhen you use only one port, the charger will direct all its power to that port and provide up to 20A. When you use both ports, the charging current parameters will be dynamically and intelligently divided between each of them. So you can enjoy optimal performance in most situations! What's more, when one port finishes working, the other will start charging at full capacity. When using 2 outlets simultaneously, the total current is up to 35A.Digital power supplyThe T1000 will not only perform well as a charger, but can also act as a digital power supply. All it takes is a few clicks on its menu! The product offers a voltage of 5-27V with 0.1V increments and an adjustable current of 1-15A. It is also equipped with short circuit, overload and reverse polarity protection. Thus, it provides unparalleled performance and safety!Additional capabilitiesDo you care about additional capabilities? Try the separately available devices that work with the charger! For example, the BD350 discharger provides a maximum of 40A. In combination with the T1000 Maestro, it also allows you to check the condition of the battery using Charger Master software. There is also a charging hub that can handle up to 150W and offers up to 4 ports (3x USB-C, 1x USB-A).User-friendly interfaceThe charger features an easy-to-read 2.8″ TN LCD screen with a clear ColorX interface. It provides a resolution of 240x320 and displays the image in 262,144 colors. Also noteworthy is the 250:1 contrast ratio. Responsive Web2.0 menus and specially designed icons make operating the device much simpler and more pleasant! What's more, the interface offers 4 languages to choose from - English, Dutch, Chinese and Japanese.Will prove itself while travelingTake the charger to your next RC event and don't sacrifice the ability to quickly charge your batteries while you're away. The T1000 Maestro is compatible with 100-240V, which means you can use it in many countries around the world without any problems. The product is also equipped with a special handle, which makes it much easier to carry.Try out the Charger Master softwareGet convenient access to the most important information - just use the Charger Master software. Simply connect the T1000 charger to your computer with a USB-C cable! Once you do, for example, you can download OTA updates and sync the latest software version to the cloud in real time. You can also view a graph of charging/discharging data.In the box T1000 charger AC power cable User manual Brand SkyRC Model T1000 Input voltage AC: 100-240V (50 / 60Hz);DC: 10-30V; Input current 35A max. Charging power AC: 450W max;DC: 1000W max; Discharge power Main port:

ZEUSLAP P16 16" 120Hz Portable Gaming MonitorThe ZEUSLAP P16 portable gaming monitor features a 16-inch IPS display with WUXGA resolution (1920×1200, 16:10 aspect ratio), a 120 Hz refresh rate, and a 3 ms response time, making it ideal for both gaming and mobile work. With 400 nits of brightness, a 1500:1 contrast ratio, and 100% sRGB coverage, it delivers a clear and natural image for most everyday uses. Its lightweight design (approx. 692 g) and slim profile (approx. 10 mm) make it easy to transport, so the monitor fits easily into a laptop bag. It features USB-C 3.1 and mini HDMI 1.4 ports, allowing you to easily connect various devices—from laptops and computers to consoles and smartphones.Smooth visuals and fast responseA 120 Hz refresh rate combined with a 3 ms response time results in noticeably smoother visuals and reduced motion blur. In practice, this means a more comfortable gaming experience, especially in fast-paced titles where reaction speed and the clarity of moving details matter. These specs also prove useful in everyday use, as scrolling through web pages or navigating the system interface is smoother. As a result, the monitor doesn’t strain your eyes during extended use and provides a more natural visual experience.More space thanks to WUXGAThe 1920×1200 WUXGA resolution offers more vertical workspace than standard 1920×1080 screens. As a result, you can work more comfortably on documents, spreadsheets, or web pages without having to constantly scroll. The 16:10 aspect ratio makes the screen better suited for office work and multitasking, which is particularly useful when traveling. This solution effectively boosts productivity on an additional monitor.Colors and User ComfortThe IPS panel with 100% sRGB coverage ensures natural color reproduction, which is important for both multimedia viewing and graphic design work. The 400-nit brightness allows for comfortable work in most well-lit rooms and in shaded outdoor areas. The matte finish reduces glare, improving readability and reducing eye strain during longer sessions. Wide viewing angles ensure the image remains clear regardless of your position.Wide Compatibility and ConnectorsThe monitor supports connections via USB-C 3.1 and mini HDMI 1.4, ensuring broad compatibility with various devices. It can be connected to a laptop, computer, console, or smartphone supporting desktop mode, making it a versatile tool for work and entertainment. It’s worth noting that power is supplied via 5V/3A, so in some cases an external charger may be required. Thanks to a simple plug-and-play system, setup is quick and doesn’t require installing additional software.Audio and Additional FeaturesThe monitor is equipped with two built-in stereo speakers (8Ω/1W), which are suitable for basic multimedia applications such as watching movies or video calls. For those seeking better sound quality, a 3.5 mm audio jack is available for connecting headphones or external speakers. The device also supports the VESA 75×75 mm standard, allowing it to be mounted on a stand or wall. This increases flexibility and allows the monitor to be adapted to various workstations.Included ZEUSLAP P16 Monitor Power adapter USB-C to USB-C cable USB to USB-C cable Mini HDMI cable Manufacturer ZEUSLAP Model P16 Screen 16 inches Panel type IPS Resolution 1920 × 1200 (WUXGA) Aspect ratio 16:10 Refresh rate 120 Hz Response time 3 ms Brightness 400 cd/m² Contrast ratio 1500:1 Color coverage 100% sRGB, 74% DCI-P3 Number of colors 16.7 million (8-bit) Viewing angles 178° (89/89/89/89) Connectors USB-C x 2, mini HDMI 1.4, Micro USB OTG, 3.5 mm jack Speakers 2 × 1W (8Ω) Power supply 5V / 3A Mounting VESA 75 × 75 mm Dimensions approx. 355 × 224 × 10 mm Weight approx. 692 g Supported OSD languages including Polish, English, German, French, Spanish, Italian