Computer Power Supply

DarkFlash DS950 computer case (black) + 6 fansDarkFlash DS950 is an ATX computer case that allows you to build a powerful configuration for gaming and more. The design offers a 270° panoramic view, making the interior of the computer fully visible from two sides – so you can showcase selected components in an interesting way, such as those with RGB lighting. You also have a rich set of ports at your disposal, including USB-C 3.2 Gen 2. The case supports ATX, Micro-ATX, and ITX motherboards and measures 450 × 222 × 465 mm. It is made of 0.5 mm thick SPCC sheet metal, which provides a stable and solid base for advanced configurations. The set also includes 6 fans.270° panoramic designThe case is equipped with two transparent panels without a vertical profile, providing a wide view of the components. This design allows for interesting visual effects – for example, you can showcase RGB fans or water cooling with a display. Give your computer a unique character!Effective heat dissipation and dust protectionThe DS950 model uses a system of dense meshes that provide effective heat dissipation while protecting against dust. The ventilation openings are located at the rear, side, and bottom of the structure, allowing air to flow freely throughout the interior. In addition, dust filters help keep components clean for longer.Create an efficient cooling systemThe case allows for the installation of 240, 280, or 360 mm water cooling on the top panel. You can also install 9 fans in it. This makes it easy to create an efficient cooling system tailored to the needs of modern processors and graphics cards. Play the latest games and use demanding software without worrying about your computer overheating!Well-thought-out space for componentsThe interior of the case has been designed to allow for convenient expansion and easy component management. The design allows you to install a graphics card up to 400 mm long and a CPU cooler up to 180 mm high. There is also space for one SSD or two HDDs, so you can flexibly configure your data storage space. The DS950 is also compatible with ITX, M-ATX, and ATX motherboards.Useful ports and buttonsThe control panel located at the bottom of the case provides convenient access to the most important ports and buttons. You have a USB-A 2.0, USB-A 3.0, and USB-C 3.2 Gen 2 connector at your disposal, providing transfer speeds of up to 10 Gbit/s. So you can transfer the files you need in the blink of an eye! There is also an HD audio jack, as well as a reset button and a power button.Quick access to the interiorThe DS950 is designed for maximum convenience during installation and component upgrades. The side panels use a Snap-Fit quick-release mechanism that allows you to open the case efficiently without the use of tools. In addition, additional hand-tightened screws increase the stability of the structure and facilitate any upgrades. Manufacturer DarkFlash Model DS950 Case type Midi tower Side panel Tempered glass Motherboard standard ATX / M-ATX / ITX Power supply standard ATX Internal drive bays SSD x1 / HDD x2 Expansion card slots 7 Max power supply length 200 mm Max graphics card length 400 mm Max CPU cooler height 180 mm Max number of fans 9 Fan mounting options Top: 120 mm x3 / 140 mm x2Side: 120 mm x2Rear: 120 mm x1Bottom: 120 mm x3 Water cooling mounting options Top: 360 mm / 280 mm / 240 mmRear 120 mm Number of installed fans 6 Fan type 120 mm Buttons and controls Power, Reset Connectors USB-C 3.2 Gen 2 x1, USB-A 3.0 x1, USB-A 2.0 x1, HD Audio Material 0.5 mm SPCC Color Black Height 465 mm Width 222 mm Depth 450 mm Weight Approx. 6.35 kg

DarkFlash DS950 computer case (white) + 6 fansDarkFlash DS950 is an ATX computer case that allows you to build a powerful configuration for gaming and more. The design offers a 270° panoramic view, making the interior of the computer fully visible from two sides – so you can showcase selected components in an interesting way, such as those with RGB lighting. You also have a rich set of ports at your disposal, including USB-C 3.2 Gen 2. The case supports ATX, Micro-ATX, and ITX motherboards and measures 450 × 222 × 465 mm. It is made of 0.5 mm thick SPCC sheet metal, which provides a stable and solid base for advanced configurations. The set also includes 6 fans.270° panoramic designThe case is equipped with two transparent panels without a vertical profile, providing a wide view of the components. This design allows for interesting visual effects – for example, you can showcase RGB fans or water cooling with a display. Give your computer a unique character!Effective heat dissipation and dust protectionThe DS950 model uses a system of dense meshes that provide effective heat dissipation while protecting against dust. The ventilation openings are located at the rear, side, and bottom of the structure, allowing air to flow freely throughout the interior. In addition, dust filters help keep components clean for longer.Create an efficient cooling systemThe case allows for the installation of 240, 280, or 360 mm water cooling on the top panel. You can also install 9 fans in it. This makes it easy to create an efficient cooling system tailored to the needs of modern processors and graphics cards. Play the latest games and use demanding software without worrying about your computer overheating!Well-thought-out space for componentsThe interior of the case has been designed to allow for convenient expansion and easy component management. The design allows you to install a graphics card up to 400 mm long and a CPU cooler up to 180 mm high. There is also space for one SSD or two HDDs, so you can flexibly configure your data storage space. The DS950 is also compatible with ITX, M-ATX, and ATX motherboards.Useful ports and buttonsThe control panel located at the bottom of the case provides convenient access to the most important ports and buttons. You have a USB-A 2.0, USB-A 3.0, and USB-C 3.2 Gen 2 connector at your disposal, providing transfer speeds of up to 10 Gbit/s. So you can transfer the files you need in the blink of an eye! There is also an HD audio jack, as well as a reset button and a power button.Quick access to the interiorThe DS950 is designed for maximum convenience during installation and component upgrades. The side panels use a Snap-Fit quick-release mechanism that allows you to open the case efficiently without the use of tools. In addition, additional hand-tightened screws increase the stability of the structure and facilitate any upgrades. Manufacturer DarkFlash Model DS950 Case type Midi tower Side panel Tempered glass Motherboard standard ATX / M-ATX / ITX Power supply standard ATX Internal drive bays SSD x1 / HDD x2 Expansion card slots 7 Max power supply length 200 mm Max graphics card length 400 mm Max CPU cooler height 180 mm Max number of fans 9 Fan mounting options Top: 120 mm x3 / 140 mm x2Side: 120 mm x2Rear: 120 mm x1Bottom: 120 mm x3 Water cooling mounting options Top: 360 mm / 280 mm / 240 mmRear 120 mm Number of installed fans 6 Fan type 120 mm Buttons and controls Power, Reset Connectors USB-C 3.2 Gen 2 x1, USB-A 3.0 x1, USB-A 2.0 x1, HD Audio Material 0.5 mm SPCC Color White Height 465 mm Width 222 mm Depth 450 mm Weight Approx. 6.35 kg

Darkflash DS900WD ATX computer case (White) + 4 fansDarkflash DS900WD is an enclosure designed for users who want practical solutions. The tempered glass side panel and wooden front panel provide good visibility of components and give the whole case a distinct look. It allows the installation of motherboards in ATX (Advanced Technology eXtended, a standard motherboard format), M-ATX (Micro Advanced Technology eXtended, a smaller motherboard format) and ITX (Information Technology eXtended, a compact motherboard format) formats, giving you great flexibility when building your computer. With a spacious design and multiple mounting options, it provides convenience in assembling the kit and good air circulation. The kit comes with 4 fans.Various cooling optionsThe DS900WD offers space to install 12 120 mm fans or 2 140 mm fans and water cooling at the top 360 mm or 240 mm, and at the front 240 mm. This allows you to build an effective cooling system for powerful configurations. In addition, the rear panel of the case features a large steel ventilation mesh for effective heat dissipation. As standard, the chassis is equipped with 4 fans to promote air circulation right from installation.Thoughtful layout and ample spaceThe chassis will accommodate a graphics card up to 425 mm in length and CPU cooling up to 170 mm in height. There are seven PCI-E (Peripheral Component Interconnect Express, an interface for expansion cards) slots, allowing the kit to be expanded with additional expansion cards. For storage media, space is provided for two HDDs (Hard Disk Drive, hard drive) or one SSD (Solid State Drive, solid state drive) and one HDD, so you won't run out of space for games and files.Built-in portsThe Darkflash DS900WD chassis is equipped with a set of the most commonly used ports that make everyday use of the computer easier. On the top panel you'll find one USB 3.0 (Universal Serial Bus 3.0, a high-speed data transfer connector), while 2 additional USB 2.0 ports are ideal for connecting a mouse, keyboard, headphones or other accessories. There is also an HD Audio (High Definition Audio, a high-quality audio connector) for convenient connection of headphones and a microphone.Refined detailsOn the right side of the case is a metal mesh that not only provides adequate ventilation, but also blocks larger dust particles from entering the case. What's more, the top and bottom mesh panels also protect your equipment from debris, and their magnetic design makes them easy to install and remove.Durable construction and stylish designThe body of the case is made of 0.5 mm SPCC (Steel, Plate, Cold Rolled, Commercial Quality - structural steel), which ensures high durability. The whole thing measures 470 x 218 x 454 mm and fits into standard under-desk spaces. The stylish design and the ability to illuminate the fans make the set look modern.Included computer case fan x4 user manual Manufacturer Darkflash Model DS900WD ATX Housing type Midi Tower Side panel Tempered glass Motherboard standard ATX / M-ATX / ITX Power supply standard Bottom side, ATX Slots for internal drives 3.5" HDD x2 / 2.5" SSD x2 Expansion card slots 7 Max graphics card length Horizontal mounting: 425 mm Max CPU cooling height 170 mm Max number of fans 12 Fan mounting options Rear: 1x 120 mm; Top: 3x 120 mm / 2x 140 mm; Side: 2x 120 mm; Bottom: 3x 120 mm; Front: x3 120 mm Water cooling mounting options Top: 360 mm / 240 mm; Front: 240 mm Number of fans installed 4 Type of fans INF24T ARGB Buttons and controls Power, Reset Connectors USB 3.0 x1, USB 2.0 x2, HD Audio Material 0.5 mm SPCC Color White Height 454 mm Width 218 mm Depth 470 mm

Niimbot K3 portable label printer (blue)The Niimbot K3 label printer is a powerful device that is great for both home and office use. With its compact dimensions of 232 x 145 x 148 mm and a weight of just 1.2 kg, the printer is easy to carry and doesn't take up much space on your desk. With the Niimbot K3, organizing and marking items becomes simple and efficient, saving time.Unmatched print qualityWith a resolution of 203 dpi, each label is clear and legible, significantly improving the aesthetics of the printouts. Thermal printing eliminates the need for ink or toners, further reducing utility costs. As a result, you can count on durable prints that are resistant to fading and smudging, making the Niimbot K3 ideal for printing a variety of labels.Fast printingA print speed of 180 mm/s allows you to quickly prepare a large number of labels in a short period of time. This is ideal for companies that need to label products or documents quickly. The high print speed does not compromise quality, making the Niimbot K3 ideal for applications that require both productivity and precision. This allows the printer to meet the needs of a variety of industries, from logistics to retail, where fast and accurate labeling is crucial.Wide compatibilityThe Niimbot K3 printer is compatible with a wide range of devices and operating systems, including Android, iOS and Windows 7/10, and you can pair it simultaneously with 10 smartphones (x3 iOS and x7 Android). Connectivity via Bluetooth and USB makes it easy and fast to connect to various devices for added convenience. This allows you to print labels directly from your smartphones, tablets or computers, greatly improving your work process.User-friendlyThe Niimbot K3 supports labels from 20mm to 80mm wide and from 15mm to 300mm long. In addition, it supports the RFID function for Niimbot label rolls, which enables automatic recognition of the type of label and makes your work even easier. With this function, you can quickly and easily change label types without having to manually set printing parameters, which greatly speeds up the labeling process.Dedicated appThe Niimbot app, available on the App Store and Google Play, allows you to easily design and print labels directly from your phone or tablet. You can use a variety of pre-made templates or create your own designs, giving you full control over the appearance of your labels. With the ability to sync with the cloud, label designs can be stored online and accessed from a variety of devices, making it even more convenient to use.Included thermal printer 50 x 30 mm label roll USB cable power cable power adapter user's manual Manufacturer Niimbot Model K3 Color blue Dimensions 232 x 145 x 148 mm Weight 1.2 kg Type thermal Resolution 203 DPI Printing speed 180 mm/s Max. Label width 80 mm Label length 15-300 mm Connection Bluetooth, USB Power supply voltage 24 V / 2.5 A , [iai:allegro_description_section_text-end][iai:allegro_description_section_text_and_photo-begin] [iai:product_name_auction][iai:photo_url(/data/include/cms/logo_retail/NIIMBOT.png)] [iai:allegro_description_section_text_and_photo-end][iai:allegro_description_section_text_and_photo-begin] Producent: [iai:product_producer_name] Kod Produktu: [iai:product_code_producer] Specyfikacja: Producent: Niimbot Model: K3 Kolor: niebieski Wymiary: 232 x 145 x 148 mm Waga: 1.2 kg Rodzaj: termiczna Rozdzielczość: 203 DPI Prędkość drukowania: 180 mm/s Max. Szerokość etykiety: 80 mm Długość etykiety: 15-300 mm Połączenie: Bluetooth, USB Napięcie zasilania: 24 V / 2.5 A W zestawie: drukarka termiczna rolka z etykietami 50 x 30 mm kabel USB kabel zasilania zasilacz instrukcja obsługi ➡️Materiał wideo prezentujący produkt: [iai:product_photos_large_1] [iai:allegro_description_section_text_and_photo-end] [iai:allegro_description_section_text-begin] Drukarka etykiet Niimbot K3 przenośna (niebieska)Drukarka etykiet Niimbot K3 to wydajne urządzenie, które świetnie sprawdzi się zarówno w domu, jak i w bi

Niimbot K3W portable label printer (blue)The Niimbot K3W label printer is a powerful device that is great for both home and office use. It supports various ways to connect to a compatible device, including via 2.4G bandwidth for convenient operation. With its compact dimensions of 232 x 145 x 148 mm and weighing just 1.2 kg, the printer is easy to carry and doesn't take up much space on your desk. With the Niimbot K3W, organizing and marking items becomes simple and efficient, saving time.Unmatched print qualityWith a resolution of 203 dpi, each label is clear and legible, significantly improving the aesthetics of the printouts. Thermal printing eliminates the need for ink or toners, further reducing utility costs. As a result, you can count on durable prints that are resistant to fading and smudging, making the Niimbot K3W ideal for printing a variety of labels.Fast printingA print speed of 180 mm/s allows you to quickly prepare a large number of labels in a short period of time. This is ideal for companies that need to label products or documents quickly. The high print speed does not compromise quality, making the Niimbot K3W ideal for applications that require both productivity and precision. This allows the printer to meet the needs of a variety of industries, from logistics to retail, where fast and accurate labeling is crucial.Wide compatibilityThe Niimbot K3W printer is compatible with a wide range of devices and operating systems, including Android, iOS and Windows 7/10, and you can pair it simultaneously with 10 smartphones (x3 iOS and x7 Android). Connectivity via Wi-Fi, Bluetooth and USB makes it easy and fast to connect to various devices for added convenience. This allows you to print labels directly from your smartphones, tablets or computers, greatly improving your work process.User-friendlyThe Niimbot K3W supports labels from 20mm to 80mm wide and from 15mm to 300mm long. In addition, it supports the RFID function for Niimbot label rolls, which enables automatic recognition of the type of label and makes your work even easier. With this function, you can quickly and easily change label types without having to manually set printing parameters, which greatly speeds up the labeling process.Dedicated appThe Niimbot app, available on the App Store and Google Play, allows you to easily design and print labels directly from your phone or tablet. You can use a variety of pre-made templates or create your own designs, giving you full control over the appearance of your labels. With the ability to sync with the cloud, label designs can be stored online and accessed from a variety of devices, making it even more convenient to use.Included thermal printer 50 x 30 mm label roll USB cable power cable power adapter user's manual Manufacturer Niimbot Model K3W Color blue Dimensions 232 x 145 x 148 mm Weight 1.2 kg Type thermal Resolution 203 DPI Printing speed 180 mm/s Max. Label width 80 mm Label length 15-300 mm Connection Wi-Fi 2.4 G, Bluetooth, USB Power supply voltage 24 V / 2.5 A , [iai:allegro_description_section_text-end][iai:allegro_description_section_text_and_photo-begin] [iai:product_name_auction][iai:photo_url(/data/include/cms/logo_retail/NIIMBOT.png)] [iai:allegro_description_section_text_and_photo-end][iai:allegro_description_section_text_and_photo-begin] Producent: [iai:product_producer_name] Kod Produktu: [iai:product_code_producer] Specyfikacja: Producent: Niimbot Model: K3W Kolor: niebieski Wymiary: 232 x 145 x 148 mm Waga: 1.2 kg Rodzaj: termiczna Rozdzielczość: 203 DPI Prędkość drukowania: 180 mm/s Max. Szerokość etykiety: 80 mm Długość etykiety: 15-300 mm Połączenie: Wi-Fi 2.4 G, Bluetooth, USB Napięcie zasilania: 24 V / 2.5 A W zestawie: drukarka termiczna rolka z etykietami 50 x 30 mm kabel USB kabel zasilania zasilacz instrukcja obsługi ➡️Materiał wideo prezentujący produkt: [iai:product_photos_large_1] [iai:allegro_description_section_text_and_photo-end] [iai:allegro_description_section_text-begin]

DarkFlash C280 computer case (black) + 7 fansThe DarkFlash C280 is a spacious computer case designed for complex configurations and impressive component display. It supports E-ATX, ATX, Micro-ATX, and ITX motherboards, as well as graphics cards up to 420 mm in length and CPU coolers up to 155 mm in height. This gives you a lot of freedom in choosing components. The 443 × 277 × 426 mm design is made of SPCC sheet metal and complemented by tempered glass panels for durability and a modern look. The set also includes 7 fans, so you can take care of the right cooling system right from the start.270° panoramic design – an eye-catching configurationThe C280 model uses a 270° panoramic design with no vertical corner profile, so the interior of the case remains fully visible from both sides. Glass side panels allow you to showcase, for example, water cooling with a screen or RGB backlit fans. This solution makes the case ideal for showcase and gaming setups. Create a unique configuration and highlight the character of your workstation!Efficient heat dissipation systemThe modular ventilation system design supports effective heat dissipation inside the case. In addition, the C280 model allows for the installation of up to ten 120 mm fans or 240/280/360 mm water cooling. This allows you to play demanding games or use advanced video editing or graphics editing software without worrying about your computer overheating.Space for large components and vertical GPU mountingThe C280 is designed to accommodate graphics cards up to 420 mm in length – you can also mount your GPU horizontally or vertically. This allows you to easily organize the space inside the case according to your vision! The spacious interior also allows you to install CPU cooling up to 155 mm in height and E-ATX, ATX, M-ATX, and ITX motherboards. For ATX and M-ATX standards, back-connect designs are also supported, which facilitates cable management and improves aesthetics. You also have 7 expansion card slots and a multifunctional bracket for mounting 3 SSDs or 2 HDDs.Refined in every detailThe case has been designed to allow quick and easy removal of panels, which facilitates expansion and maintenance of the set. The whole thing is complemented by dust filters located at the top and bottom of the structure, which limit the ingress of contaminants into the interior.Convenient access to portsAt the top of the case, you will find a set of useful ports. You have a USB 3.0 connector, two USB 2.0 connectors, an HD audio jack, as well as power and reset buttons at your disposal. So you can conveniently connect a mouse and keyboard to your computer, transfer files, use headphones, and much more. Manufacturer DarkFlash Model C280 Case type Midi tower Side panel Tempered glass Motherboard standard E-ATX / ATX (back-connect) / M-ATX (back-connect) / ITX Power supply standard ATX Internal drive bays SSD x3 / HDD x2 Expansion card slots 7 Max power supply length 240 mm Max graphics card length 420 mm Max CPU cooler height 155 mm Max number of fans 10 Fan mounting options Top: 120 mm x3 / 140 mm x2Side: 120 mm x3Rear: 120 mm x1Bottom: 120 mm x3 / 140 mm x2 Water cooling mounting options Top: 240 mm / 280 mm / 360 mmSide: 240 mm / 360 mmRear: 120 mm; Number of installed fans 7 Fan type 120 mm Buttons and controls Power, Reset Connectors USB-A 3.0 x1, USB-A 2.0 x2, HD Audio Material 0.7 mm SPCC Color Black Height 426 mm Width 277 mm Depth 443 mm Weight Approx. 6.8 kg

Darkflash TH285 computer case (black) + 4 fansDarkflash TH285 is an ATX-type case with 4 fans that offers a solid base for building high-performance computers. Its dimensions are 426 mm x 285 mm x 403 mm, which allows even large components to be placed freely. It is made of durable 0.7 mm thick SPCC steel, ensuring resistance to damage.Effective coolingThe Darkflash TH285 is equipped with 4 pre-installed fans that effectively promote airflow and take care of proper temperatures. It is possible to mount up to 7 fans. The side panel provides space for 3 120 mm or 2x 140 mm fans, while a single 120 mm fan can be mounted on the rear panel. The bottom part of the case will accommodate 3 120 mm fans, which ensures free airflow from the bottom to the top. In addition, the chassis allows the installation of a radiator of up to 360 mm on the bottom and up to 280 mm on the side, guaranteeing flexibility in the selection of a water cooling system.Transparent tempered glass panelThe side panel is made of tempered glass, which allows a full view of the case's interior. This allows you to admire the carefully arranged components.Supported board and power supply standardsThe TH285 is compatible with ATX, M-ATX and ITX standard motherboards. With a bottom-mounted PSU with a maximum length of 240mm, the case allows for optimal cable placement and better airflow. The solution used also helps to separate warmer air from the CPU and graphics card, resulting in more stable temperatures for the entire system.Maximum compatibilityThe TH285 case allows the installation of a graphics card with a maximum length of 415 mm - so it is compatible with the latest and most powerful models available on the market. In addition, the maximum height of the CPU is 160 mm, which allows the installation of powerful cooling.I/O panel functionalityThe top I/O panel features a USB 3.0 port for high-speed data transfer, 2 USB 2.0 ports, as well as an HD audio jack. Such a layout allows easy access to the most important connectors and allows connecting a variety of peripherals. In addition, the case offers power and reset buttons.Expansion optionsThe Darkflash TH285 offers support for up to 2 HDDs and 3 SSDs, giving you plenty of storage flexibility. The 2.5" and 3.5" drive bays allow you to customize your storage space accordingly, allowing you to store games, applications and large files simultaneously. Manufacturer Darkflash Model TH285 Housing type Midi Tower Side panel Tempered glass Motherboard standard ATX, M-ATX, ITX Power supply standard ATX at the bottom Slots for internal drives 3.5'' HDD x2, 2.5'' SSD x3 Expansion card slots 7 Max PSU length 240 mm Max length of graphics card 415 mm Max height of CPU cooler 160 mm Max number of fans 7 Fan mounting options Side: 120 mm x3 / 140 mm x2; Rear: 120 mm x1; Bottom: 120 mm x3; Water cooling mounting options Bottom: 240 mm / 360 mm; Side: 240 mm / 280 mm; Number of fans installed 4 (3 at the bottom, 1 at the back) Type of fans Air12S, 5V 3-pin, 4-pin, ARGB Buttons and controls Power, Reset Connectors USB 3.0 x1, USB 2.0 x2, HD Audio Material 0.7 mm SPCC Color Black Height 403 mm Width 285 mm Depth 426 mm Weight 8.42 kg

Niimbot K3 portable label printer (cream)The Niimbot K3 label printer is a powerful device that is great for both home and office use. With its compact dimensions of 232 x 145 x 148 mm and a weight of just 1.2 kg, the printer is easy to carry and does not take up much space on your desk. With the Niimbot K3, organizing and marking items becomes simple and efficient, saving time.Unmatched print qualityWith a resolution of 203 dpi, each label is clear and legible, significantly improving the aesthetics of the printouts. Thermal printing eliminates the need for ink or toners, further reducing utility costs. As a result, you can count on durable prints that are resistant to fading and smudging, making the Niimbot K3 ideal for printing a variety of labels.Fast printingA print speed of 180 mm/s allows you to quickly prepare a large number of labels in a short period of time. This is ideal for companies that need to label products or documents quickly. The high print speed does not compromise quality, making the Niimbot K3 ideal for applications that require both productivity and precision. This allows the printer to meet the needs of a variety of industries, from logistics to retail, where fast and accurate labeling is crucial.Wide compatibilityThe Niimbot K3 printer is compatible with a wide range of devices and operating systems, including Android, iOS and Windows 7/10, and you can pair it simultaneously with 10 smartphones (x3 iOS and x7 Android). Connectivity via Bluetooth and USB makes it easy and fast to connect to various devices for added convenience. This allows you to print labels directly from your smartphones, tablets or computers, greatly improving your work process.User-friendlyThe Niimbot K3 supports labels from 20mm to 80mm wide and from 15mm to 300mm long. In addition, it supports the RFID function for Niimbot label rolls, which enables automatic recognition of the type of label and makes your work even easier. With this function, you can quickly and easily change label types without having to manually set printing parameters, which greatly speeds up the labeling process.Dedicated appThe Niimbot app, available on the App Store and Google Play, allows you to easily design and print labels directly from your phone or tablet. You can use a variety of pre-made templates or create your own designs, giving you full control over the appearance of your labels. With the ability to sync with the cloud, label designs can be stored online and accessed from a variety of devices, making it even more convenient to use.Included thermal printer 50 x 30 mm label roll USB cable power cable power adapter user's manual Manufacturer Niimbot Model K3 Color cream Dimensions 232 x 145 x 148 mm Weight 1.2 kg Type thermal Resolution 203 DPI Printing speed 180 mm/s Max. Label width 80 mm Label length 15-300 mm Connection Bluetooth, USB Power supply voltage 24 V / 2.5 A , [iai:allegro_description_section_text-end][iai:allegro_description_section_text_and_photo-begin] [iai:product_name_auction][iai:photo_url(/data/include/cms/logo_retail/NIIMBOT.png)] [iai:allegro_description_section_text_and_photo-end][iai:allegro_description_section_text_and_photo-begin] Producent: [iai:product_producer_name] Kod Produktu: [iai:product_code_producer] Specyfikacja: Producent: Niimbot Model: K3 Kolor: kremowy Wymiary: 232 x 145 x 148 mm Waga: 1.2 kg Rodzaj: termiczna Rozdzielczość: 203 DPI Prędkość drukowania: 180 mm/s Max. Szerokość etykiety: 80 mm Długość etykiety: 15-300 mm Połączenie: Bluetooth, USB Napięcie zasilania: 24 V / 2.5 A W zestawie: drukarka termiczna rolka z etykietami 50 x 30 mm kabel USB kabel zasilania zasilacz instrukcja obsługi ➡️Materiał wideo prezentujący produkt: [iai:product_photos_large_1] [iai:allegro_description_section_text_and_photo-end] [iai:allegro_description_section_text-begin] Drukarka etykiet Niimbot K3 przenośna (kremowa)Drukarka etykiet Niimbot K3 to wydajne urządzenie, które świetnie sprawdzi się zarówno w domu, jak i w biu

Darkflash DS900 AIR computer case (black) + 6 ARGB fansDiscover a new quality among computer cases with the Darkflash DS900 AIR model. The elegant black model stands out not only for its modern design, but also for its advanced features that will meet the expectations of the most demanding users. With DS900 AIR your computer will become more efficient, stable and impressive. In the set you will find 6 DM12F 120 mm fans.Stability and designThe unique design of the case with trapezoidal feet and shock absorbing pads provides exceptional stability, eliminating vibrations. This is especially important for powerful computers that can generate vibrations during intensive work.ExpandableThe DS900 AIR is a model that provides users with ease of expansion. The spacious and easy-to-clean interior gives freedom of expansion. The chassis offers maximum compatibility with a flexible mount that accommodates up to 2 SSDs and 2 HDDs. This gives you excellent options for configuring your storage according to your individual needs.Protection and coolingThe DS900 Air allows you to build a powerful cooling system with the ability to mount multiple fans and heat sinks, ensuring optimal working conditions for all components. What's more, the back of the case is equipped with a protective steel mesh that allows for even more efficient ventilation. This is crucial for maintaining optimal temperatures and efficient cooling especially during intensive work.Compatibility and additional slotsThe Darkflash DS900 AIR is compatible with ATX, M-ATX and ITX motherboards, providing a wide range of configuration options. It also features 7 additional slots, a maximum VGA length of 425 mm and a maximum CPU height of 170 mm. The power supply located at the bottom of the case allows for better organization and cable management. Manufacturer Darkflash Model DS900 Air Housing type Midi Tower Side panel Tempered glass Motherboard standard ATX, M-ATX, ITX Power supply standard ATX at the bottom Slots for internal drives 3.5 "HDD x2; 2.5 "SSD x2 Expansion card slots 7 Max graphics card length 425 mm Max CPU cooling height 170 mm Max number of fans 9 Fan mounting options Side: 120 mm x 2; Rear: 120 mm x 1; Top: 120 mm x3/140 mm x 2; PSU: 120 mm x 3; Water cooling mounting options Side: 240 mm; Top: 240/360 mm Number of fans installed 6 Type of fans DM12F 120 mm 6-pin, ARGB + controller Buttons and controllers Power, Reset, LED Connectors USB-C x 1, USB 3.0 x1, USB 2.0 x1, HD audio Material 0.5 mm SPCC Color Black Height 454 mm Width 218 mm Depth 434 mm Weight 8.7 kg , Obudowa komputerowa Darkflash DS900 AIR (czarna) + 6 wentylatorów ARGBOdkryj nową jakość wśród obudów komputerowych z modelem Darkflash DS900 AIR. Elegancki, czarny model wyróżnia się nie tylko nowoczesnym designem, ale także zaawansowanymi funkcjami, które spełnią oczekiwania najbardziej wymagających użytkowników. Z DS900 AIR Twój komputer stanie się wydajniejszy, stabilniejszy i bardziej efektowny. W zestawie znajdziesz 6 wentylatorów DM12F 120 mm.Stabilność i designUnikalny design obudowy z trapezowymi stopkami i podkładkami amortyzującymi zapewnia wyjątkową stabilność, eliminując drgania. Jest to szczególnie istotne w przypadku potężnych komputerów, które mogą generować wibracje podczas intensywnej pracy.Możliwość rozbudowyDS900 AIR to model, który zapewnia użytkownikom łatwość rozbudowy. Przestronne i łatwe w utrzymaniu w czystości wnętrze daje swobodę rozbudowy. Obudowa oferuje maksymalną kompatybilność dzięki elastycznemu uchwytowi, który pomieści do 2 dysków SSD i 2 dysków HDD. To daje znakomite możliwości konfiguracji pamięci masowej zgodnie z indywidualnymi potrzebami.Ochrona i chłodzenieModel DS900 Air pozwala zbudować wydajny system chłodzenia z możliwością montażu wielu wentylatorów i radiatorów, zapewniając optymalne warunki pracy dla wszystkich komponentów. Co więcej, tylna część obudowy została wyposażona w ochronną siatkę ze stali, która pozwala na jeszcze skuteczniejszą wentylację. Jest t

DarkFlash C280 computer case (white) + 7 fansThe DarkFlash C280 is a spacious computer case designed for complex configurations and impressive component display. It supports E-ATX, ATX, Micro-ATX, and ITX motherboards, as well as graphics cards up to 420 mm in length and CPU coolers up to 155 mm in height. This gives you a lot of freedom in choosing components. The 443 × 277 × 426 mm design is made of SPCC sheet metal and complemented by tempered glass panels, ensuring durability and a modern look. The set also includes 7 fans, so you can take care of the right cooling system right from the start.270° panoramic design – an eye-catching configurationThe C280 model uses a 270° panoramic design with no vertical corner profile, so the interior of the case remains fully visible from both sides. Glass side panels allow you to showcase, for example, water cooling with a screen or RGB backlit fans. This solution makes the case ideal for showcase and gaming setups. Create a unique configuration and highlight the character of your workstation!Efficient heat dissipation systemThe modular ventilation system design supports effective heat dissipation inside the case. In addition, the C280 model allows for the installation of up to ten 120 mm fans or 240/280/360 mm water cooling. This allows you to play demanding games or use advanced video editing or graphics editing software without worrying about your computer overheating.Space for large components and vertical GPU mountingThe C280 is designed to accommodate graphics cards up to 420 mm in length – you can also mount your GPU horizontally or vertically. This allows you to easily organize the space inside the case according to your vision! The spacious interior also allows you to install CPU cooling up to 155 mm in height and E-ATX, ATX, M-ATX, and ITX motherboards. For ATX and M-ATX standards, back-connect designs are also supported, which facilitates cable management and improves aesthetics. You also have 7 expansion card slots and a multifunctional bracket for mounting 3 SSDs or 2 HDDs.Refined in every detailThe case has been designed to allow quick and convenient removal of panels, which facilitates expansion and maintenance of the set. The whole is complemented by dust filters located in the upper and lower parts of the structure, which limit the ingress of contaminants into the interior.Convenient access to portsIn the upper part of the case, you will find a set of useful ports. You have a USB 3.0 connector, two USB 2.0 connectors, an HD audio jack, as well as power and reset buttons. So you can conveniently connect a mouse and keyboard to your computer, transfer files, use headphones, and much more. Manufacturer DarkFlash Model C280 Case type Midi tower Side panel Tempered glass Motherboard standard E-ATX / ATX (back-connect) / M-ATX (back-connect) / ITX Power supply standard ATX Internal drive bays SSD x3 / HDD x2 Expansion card slots 7 Max power supply length 240 mm Max graphics card length 420 mm Max CPU cooler height 155 mm Max number of fans 10 Fan mounting options Top: 120 mm x3 / 140 mm x2Side: 120 mm x3Rear: 120 mm x1Bottom: 120 mm x3 / 140 mm x2 Water cooling mounting options Top: 240 mm / 280 mm / 360 mmSide: 240 mm / 360 mmRear: 120 mm; Number of installed fans 7 Fan type 120 mm Buttons and controls Power, Reset Connectors USB-A 3.0 x1, USB-A 2.0 x2, HD Audio Material 0.7 mm SPCC Color White Height 426 mm Width 277 mm Depth 443 mm Weight Approx. 6.8 kg

Darkflash DY460 computer case (White) + 4 ARGB fansThe Darkflash DY460 case will allow you to build not only a powerful, but also a great-looking computer. It combines tempered glass panels with a vertical dual-chamber layout, so you can install many different components in it and display them in an interesting way. The model allows rear mounting of selected motherboards, provides space for heatsinks up to 360 mm, and has a built-in USB-C 3.2 Gen 2 port. The compact dimensions (452 x 238 x 541 mm) hide a spacious compartment that can accommodate a graphics card up to 400 mm long and CPU cooling up to 185 mm high. In addition, you'll find four ARGB fans included.Unprecedented cooling performanceThe case allows the installation of up to 10 120 mm fans, providing excellent airflow for the most demanding components. It is also possible to install a 360 mm heatsink on the top or 120/240 mm on the rear. Also noteworthy are the numerous ventilation holes. All this means that you can play AAA games or use demanding software without worry - your computer will not overheat. The kit includes four ARGB fans.Wide expansion possibilitiesBuild a computer perfectly suited to your needs. The Darkflash DY460 case allows you to install a graphics card up to 400 mm horizontally or up to 385 mm vertically (using optional mounting accessories, which are not included). You can also accommodate one SSD and two HDDs. In addition, back-connect mounting of ATX and M-ATX motherboards is possible, which simplifies cable management and improves the aesthetics of the entire setup.Useful portsThe built-in USB-C 3.2 Gen 2 port with up to 10 Gbit/s enables lightning-fast data transfers - useful for graphic designers, video editors, photographers and more. In addition, you'll find USB-A 3.0 and HD Audio connectors on the case, as well as Power and Reset buttons. This makes using the computer convenient and hassle-free!Delightful designTempered glass on three sides of the case provides a 330° panoramic view of the computer's interior, perfectly displaying selected components - such as those with RGB backlighting. Such a solution makes each configuration a real desktop ornament. What's more, the case was created from durable 0.8 mm thick SPCC steel and is effectively protected against dust - it will serve you well for many years.Included Computer case Fan x4 Manufacturer Darkflash Model DY460 Housing type Big Tower Side panel Tempered glass Motherboard standard ATX, M-ATX, ITX Power supply standard ATX at the bottom Slots for internal drives 3.5'' HDD x2, 2.5'' SSD x1 Expansion card slots 7 Max graphics card length Horizontal mounting: 400 m; Vertical mounting: 385 mm; Max CPU cooling height 185 mm Max number of fans 10 Fan mounting options Side: 120 mm x3; Rear: 120 mm x1; Top: 120 mm x3; Bottom: 120 mm x3; Water cooling mounting options Top: 360 mm; Rear: 120 mm / 140 mm; Number of fans installed 4 Type of fans ARGB Buttons and controls Power, Reset Connectors USB-C 3.2 Gen 2 x1, USB-A 3.0 x1, HD audio Material 0.8 mm SPCC Color White Height 541 mm Width 238 mm Depth 452 mm

Uni-T UT332+ Temperature and Humidity MeterThe Uni-T UT332+ Temperature and Humidity Meter is a precision instrument for measurements ranging from -20°C to 70°C and 0–99.9% RH, distinguished by its high accuracy (up to ±0.3°C) and fast response time of approximately 1 second. The device stores up to 999 data sets and allows them to be exported to a computer via USB, facilitating the analysis of results. Thanks to its dew point and wet-bulb temperature measurement functions, as well as the ability to calibrate via offset settings, the UT332+ performs well in industrial, laboratory, and environmental applications.Accurate measurements and condition monitoringThe UT332+ delivers reliable results thanks to its high-precision temperature and humidity measurements. Measuring dew point and wet-bulb temperature allows for a better assessment of actual environmental conditions, which is important, for example, in warehousing or manufacturing. The offset setting function allows for professional calibration of temperature, humidity, and dew point readings, which is essential for periodic calibrations and work requiring compliance with standards.User-friendly operation and data managementThe ability to store up to 999 measurements and export them to a computer via USB provides greater control over data analysis. Automatic logging and the MAX/MIN function help quickly detect changes in parameters without constant monitoring. The backlit LCD screen improves readability, and the auto-off feature reduces power consumption, enhancing user comfort both in the field and in stationary work.Included Uni-T UT332+ Temperature and Humidity Meter USB cable User manual Batteries x 4 Manufacturer Uni-T Model UT332+ Temperature range -20°C ~ 70°C Temperature accuracy ±0.3°C Dew point range -78.2°C ~ 70°C Dew point accuracy ±0.8°C Wet bulb temperature range -21.6°C ~ 70°C Accuracy ±0.3°C Humidity range 0 ~ 99.9% RH Humidity accuracy ±2% RH (10–80% RH), ±2.5% RH (remaining range) Resolution 0.1°C / 0.1% RH Data memory 999 measurements Units °C / °F Response time approx. 1 second Interface USB (data transfer and power supply) Functions MAX/MIN, Data Hold, alarm, automatic data logging Additional features LCD backlight, auto power off, PC analysis

DarkFlash AIRNOVA computer case (white) + 3 fansDarkFlash AIRNOVA is a spacious Big Tower case that supports E-ATX, ATX, M-ATX, and ITX motherboards, offering space for graphics cards up to 395 mm in length and CPU coolers up to 175 mm in height. It is equipped with ventilation panels with a large 5x5 mm mesh, 3 120 mm fans, and support for water cooling up to 420 mm. The top panel has all the necessary connectors: two USB 3.0 ports, HD Audio input, Power and Reset buttons, and a fast USB Type-C Gen2 (10 Gbps) connector, which significantly improves data transfer.Effective coolingAIRNOVA has been designed with an emphasis on free airflow. 5x5 mm ventilation grilles are located on six sides of the case, which supports effective heat dissipation. Inside, there is room for three 120 mm fans at the bottom, and a total of up to 10 fans can be installed. The case is also compatible with water cooling – a 420 mm radiator can be installed at the front and a 360 mm radiator at the top.Practical mounting solutionsAIRNOVA offers a modular design with a quick-release system. All panels – including the fan frame, dust cover, and motherboard tray – are removable. This facilitates installation, cleaning, and access to components. In addition, there is 33 mm of space for cable routing at the rear, ensuring an aesthetic and tidy installation.Dust protectionDarkFlash AIRNOVA is equipped with 4 dust filters that effectively protect the interior of the case from contaminants such as dust, hair, and fine pollen. The filters are made of densely woven nylon, which traps up to 98% of contaminants, significantly extending the life of the components and reducing the need for frequent cleaning. Each of the filters – located on the top, bottom, and side panels – is easy to remove thanks to magnetic clips and a slide-out system.Included computer case fan x3 Manufacturer DarkFlash Model AIRNOVA Case type Big Tower Motherboard standard E-ATX, ATX, M-ATX, ITX Power supply standard ATX (bottom mounting) Internal drive bays 2x SSD, 2x HDD / 1x SSD + 1x HDD Expansion slots 7 Max power supply length 200 mm Max graphics card length 395 mm Max CPU cooler height 175 mm Max number of fans 10 Fan mounting options Front: 3x 120 mm / 3x 140 mmTop: 3x 120 mm / 2x 140 mmRear: 1x 120 mm / 1x 140 mmBottom: 3x 120 mm Water cooling mounting options Front: 360 / 420 mmTop: 360 mm Number of installed fans 3 Buttons and controls Power, Reset Connectors 2x USB 3.0, 1x USB Type-C Gen2 (10 Gbps), HD Audio Color White Height 538 mm Width 238 mm Depth 464 mm