Dc 48

UNI-T UT683KIT digital cable locatorThe UNI-T UT683KIT digital cable locator is a reliable diagnostic tool that combines the functionality of a transmitter and a receiver, enabling fast and precise tracing of cable runs in low-voltage installations. Designed for use in harsh environments, it offers high noise immunity and automatic detection of faults such as short circuits, breaks or incorrect polarity. It is a professional solution that significantly speeds up and facilitates the work of installers, service technicians and electricians.Precise wire and fault diagnosticsThe UT683KIT can quickly locate a wire in a bundle and pinpoint the location of a fault - even with cable lengths exceeding 3,000 meters (in the case of RJ11). It also allows checking cable continuity and testing for short or break (up to 10 kΩ), as well as identifying polarity. A port illumination function further facilitates verification of correct connections.Safe operation with low-voltage installationsThe UT683KIT is designed to work with installations up to 60V DC. In addition, the receiver is equipped with NCV (non-contact voltage detection) function, which increases the safety of use. A practical 3.5mm headphone jack allows convenient listening to the signal in difficult conditions, and a low power indicator lets you know when it needs to be recharged.Ergonomics and performance in a compact form factorThe kit consists of a lightweight transmitter (95 g) and a rugged receiver (127 g), both of which fit perfectly in the hand thanks to their compact dimensions. The built-in 1050 mAh lithium-ion batteries provide more than 8 hours of transmitter operation and more than 5 hours of receiver operation - enough for a full day of field measurements. The entire unit is packaged in a practical carrying case for easy storage.Included UT683KIT transmitter and receiver USB cable for charging RJ11 test cable with crocodiles RJ45 test cable RJ11 test cable User manual (English) Carrying bag Original packaging (gift box) Manufacturer Uni-T Manufacturer code UT683KIT Certifications CE, RoHS Power supply 1050 mAh lithium-ion rechargeable battery Flashing port (transmitter) Yes Cable tracking (transmitter) Yes Line alignment (transmitter) Yes Break/short-circuit test (transmitter) Up to 10 kΩ Polarity test (transmitter) Yes Transmitter operating time >8 hours Cable tracking (receiver) RJ11 >3000 m; RJ45 >100 m NCV function (receiver) Yes Headphone jack (receiver) 3.5 mm Low power indicator Yes Receiver operating time >5 hours Transmitter dimensions 130 × 51 × 28 mm Dimensions of receiver 197 × 48 × 34 mm Weight of the transmitter approx. 95 g Weight of the receiver approx. 127 g

Niimbot B21S portable label printer (mint)The Nimbot B21S portable label printer will work well in the store, at home or at work. It requires no ink and allows you to print several labels per second. It is equipped with a 1200 mAh battery, which translates into a long working time. Operation of the device is facilitated by an app, and Bluetooth is responsible for a fast and stable connection.Useful for everyday useNiimbot thermal printer will find its use in various situations. You will use it at home to label spices or food containers. The B21S will also prove useful in the store for labeling products with EAN codes, printing prices and expiration dates, or creating QR codes.Dedicated appTo start using the printer, download the dedicated Niimbot app - it is compatible with Android and iOS. From it you can design labels, customize the font, amount of content, etc. It allows you to print barcodes, QR codes, Excel table or time and date. It also supports serial printing, scan or emoticons and voice input. The possibilities are almost endless!Included thermal printer USB-A to USB-C cable label roll user manual Manufacturer Niimbot Model B21S Color mint Weight 299 g Dimensions 130 x 94 x 61 mm Roll width 20-48 mm Battery capacity 1200 mAh Charging time 3-4 h Power 4 dBm Max. Input voltage DC 5V/1A Charging port USB-C Operating temperature 5°C~40°C Resolution 203 dpi Type thermal Connection Bluetooth, USB-C

Charger B6AC NeoThe SkyRC B6AC Neo charger will surprise you with its vast capabilities. It can charge batteries with up to 200 watts (DC) or 60 watts (AC), as well as discharge them and monitor their condition. It stands out for its impressive performance and quiet operation, and thanks to the use of GaN technology it is extremely compact, making it much easier to transport. The device will also work well as a regular charger for a smartphone or laptop - it will provide power of up to 65 watts.Innovative GaN technology - high performance, small sizeThe charger uses innovative GaN technology, so it combines high performance, efficient heat dissipation and a compact design. The device is smaller than a standard credit card, allowing for convenient, hassle-free transportation. You can carry it with you at all times!Impressive powerForget about the long wait until your batteries are charged. When the charger is powered by direct current (DC), it provides up to 200 watts of power, allowing you to reduce charging time to about 10 minutes. On the other hand, if you use alternating current (AC), the device's power will be a maximum of 60 watts. This will allow you to charge the battery in about 20 minutes! What's more, the XT60 DC interface and compatibility with 100-240 V AC provides more flexibility and freedom. Note: measurements were taken while charging a 6S LiPo battery with a capacity of 1300 mAh.Discharge your battery in a few momentsNeed to discharge a battery quickly? No problem - the B6AC Neo charger is equipped with a special port for efficient, effective discharging. Combined with the main port, it provides up to 19 watts of power. What does this mean in practice? For example, it only takes about 1.5 hours to discharge a 1300 mAh LiPo 6S battery. Remember, however, that if you choose to use only the main port, the power will be limited to 5 watts.Check the condition of your batteriesMonitoring the condition of your batteries and taking proper care of them is the key to prolonging their life and ensuring your safety of use. The SkyRC B6AC Neo charger will help you do just that! With its help you can easily check the cell voltage and balance. This way you will always know if your battery needs charging, discharging or balancing! Note: the voltage and balance measurement function is available for LiPo, LiHV, LiFe and LiIon batteries.Universal charger and digital power supplyWith the SkyRC B6AC Neo charger you will charge not only your batteries, but also, for example, your smartphone, laptop or Nintendo Switch console. The device is equipped with an additional USB-C port, which supports PD 65 W fast charging. This allows your equipment to be up and running in no time! In addition, the B6AC Neo will prove itself as a digital power supply - it offers an optimal voltage of 2-27 V with 0.1 V increments and an adjustable current of 1-10 A.Performance and safetyThe charger uses a patented rectifier circuit to efficiently convert DC current for safe power supply. It also has a built-in MCU that precisely controls charging to minimize power loss. Its added advantage is an advanced protection system against short circuit, overheating and overvoltage, among others. So you can enjoy not only performance, but also safety!User-friendlyConvenient operation of the charger is made possible by the built-in display with the new ColorX interface, which features a clear, responsive menu and specially designed, easy-to-read icons. What's more, you can choose from up to 5 languages - English, Dutch, French, Chinese and Japanese. Also noteworthy is the quiet operation of the device - even at full load the volume level of its fans is only about 48 dB. Don't be afraid of annoying noise! There is also a dedicated Charger Master app, which, among other things, allows you to conveniently update the charger's software - just connect it to your computer via a USB-C port. Manufacturer SkyRC Name B6AC Neo Model SK-100200 Color Black Screen TN Screen diago