Digital Clamp Meter

FNIRSI DMC-100 digital clamp meterFNIRSI DMC-100 is a digital clamp meter for universal measurements in electrical installations. The device integrates the functions of measuring current, voltage, resistance and many other parameters, while allowing non-contact voltage testing. Thanks to its clamp design and 25mm diameter bore, the DMC-100 is suitable for both home work and professional service use.Extensive measurement functionsThe meter supports measurement of AC/DC current, AC/DC voltage, resistance, capacitance, circuit continuity, diodes, frequency, temperature, and neutral and phase wire test. Thanks to the NCV (non-contact voltage detection) function, it is possible to quickly check the presence of voltage without the risk of contact with wires.Dual measuring system designThe use of two independent measuring circuits allows simultaneous measurement of voltage and current, with automatic power calculation. This feature speeds up diagnostics and eliminates the need for additional instruments.Measurement accuracy and data recordingThe device offers measurement accuracy based on True RMS technology and a resolution of up to 10000 counts, which guarantees precise readings even for nonlinear signals. The graph and data recording function allows analysis of up to 30 sets of results, with the ability to view the last 8 measurements.Efficient power supplyA built-in 1500 mAh lithium battery ensures long operation without recharging. Protected by a silicone cap, the USB-C connector is protected from dust and damage. The 2" color LCD display and built-in flashlight allow you to work in low visibility conditions.Included clamp meter USB-A to USB-C charging cable probe for measuring temperature measuring cable user manual Manufacturer Fnirsi Model DMC-100 Display TFT 2.0" color screen Power supply Lithium battery 3.7V Charging USB Type-C, 5V/1A Maximum clamp diameter 25mm Dimensions 193 × 74 × 32 mm Weight 194 g DC voltage range 9.999V / 99.99V / 999.9V DC voltage accuracy ±(0.5% + 3) AC voltage range 9.999V / 99.99V / 750.0V Accuracy of AC voltage ±(1% + 3) DC current range 99.99A / 600.0A Accuracy of DC current ±(2.5% + 10) AC current range 99.99A / 600.0A Accuracy of AC current ±(2.5% + 10) Resistance range 9.999MΩ / 999.9kΩ / 99.99kΩ / 9.999kΩ / 999.9Ω Resistance accuracy ±(1.5% + 3) Additional resistance range 99.99MΩ Resistance accuracy ±(1.5% + 3) Capacitance range 999.9μF / 99.99μF / 9.999μF / 999.9nF / 99.99nF / 9.999nF Accuracy of capacitance ±(2.0% + 5) Additional capacitance range 9.999mF / 99.99mF Accuracy of capacitance ±(5.0% + 20) Frequency range 9.999MHz / 999.9kHz / 99.99kHz / 9.999kHz / 999.99Hz / 99.99Hz / 9.999Hz Frequency accuracy ±(0.1% + 2) Temperature range (-55 ~ 1300°C) / (-67 ~ 2372°F) Temperature accuracy ±(2.5% + 5) Diode / continuity / NCV / phase wire test (LIVE) yes

Uni-T UT213B 3rd Generation 400A Digital Clamp MeterThe Uni-T UT213B is a 400A digital clamp meter designed for users who, in addition to standard electrical measurements, also need to monitor temperature. The device complies with the CAT III 600V safety standard and is well-suited for electricians and HVAC/R technicians. The built-in flashlight and easy-to-read display facilitate work in low-light conditions, while the compact housing enhances the convenience of daily use.More measurement capabilities for everyday useThe UT213B model allows for the measurement of AC current up to 400A, AC/DC voltage up to 600V, resistance up to 40MΩ, capacitance up to 40mF, frequency from 10Hz to 1MHz, and temperature from -40°C to 1000°C and from -40°F to 1832°F. A maximum reading of 4000 and a 30 mm jaw opening ensure convenient operation during daily use. An additional advantage is True RMS, which improves measurement accuracy in more demanding applications.Extensive features and operational readinessThe device is equipped with a diode test, NCV function, Data Hold, Relative mode, MAX/MIN, LCD backlight, flashlight, auto-off, continuity buzzer, and input protection. Thanks to the included test leads and spot temperature probe, the model is ready for comprehensive diagnostics right out of the box. Powered by three R03 batteries and weighing 280 g, the meter remains handy and convenient for everyday use.Included Clamp meter Batteries x3 Test leads Temperature probe User manual Specifications Manufacturer Uni-T Model UT213B Type True RMS clamp meter AC current 400A ±(1.8%+9) AC voltage 600V ±(1.2%+5) DC voltage 600V ±(0.8%+1) Resistance 40MΩ ±(1%+2) Capacitance 40mF ±(4%+5) Frequency 10Hz ~ 1MHz ±(0.1%+4) Temperature -40°C ~ 1000°C ±(1%+3) Maximum reading 4000 Functions True RMS, NCV, diode test, continuity test, Data Hold, Relative mode, Max/Min, LCD backlight, flashlight, automatic range switching, auto power off Jaw opening 30 mm Power supply 3x 1.5V battery (R03) Dimensions 220 x 75 x 40 mm Weight 280 g Safety CAT III 600V Certifications CE, UKCA, cETLus