Fit Lite

SONOFF MINI-ZB2GS-E ZigBee two-channel wall switchSONOFF MINI-ZB2GS-E is a state-of-the-art ZigBee 3.0 two-channel wall switch designed for stable, fast and safe control of lighting and other electrical circuits. It allows independent control of two loads, acts as a ZigBee router to amplify a mesh network, offers Detach Relay mode, support for scenes, schedules, voice control and integration with popular smart home platforms - all in a sleek, minimalist flush-mount form.Stable ZigBee 3.0 communication and dual channel supportThe switch uses the ZigBee 3.0 protocol (IEEE 802.15.4), ensuring low latency and high reliability of operation. Importantly, the device acts as a ZigBee Router, thus strengthening and extending the range of the mesh network in the home. The ceramic antenna used and the Enhanced / Turbo Mode further improve the stability of the connection, which translates into more reliable operation of the entire smart home system - especially in larger apartments and houses. In addition, the dual-channel design allows you to control two circuits from a single point, such as a ceiling lamp and a table light, or two light zones in one room. Such a solution means fewer switches on the wall, a consistent look and more convenience on a daily basis - both for manual control and from the app. Each channel can be configured independently - including automation and scenes.Detach Relay mode - ideal for smart bulbsThe detach relay function ensures that the physical button does not cut off power, but only sends a control command. As a result, smart bulbs do not lose their connection to the network and do not go offline after using a wall switch. In addition, it is possible to use ZigBee Binding, i.e. to directly bind a button to another ZigBee device - without the involvement of the cloud, which ensures immediate response even if the Internet is temporarily absent.Scenes, schedules and automationsThe MINI-ZB2GS-E allows you to create smart scenes - such as automatically turning on lights when motion is detected, or delaying switching on when power is applied. The user can specify the device's behavior when power is restored (Power-On State), including setting a delay to turn on the light, which prevents it from accidentally turning on after a power outage. Schedules and timers allow the lighting operation to be matched to the rhythm of the household members' day, increasing comfort and a sense of security.Broad compatibility with smart home platformsThe device works with the eWeLink app and Home Assistant (ZHA and Zigbee2MQTT), offering extensive configuration options for more advanced users. It can be used with a number of ZigBee hubs, including ZBBridge-P, ZBBridge-U, NSPanel Pro, iHost and ZigBee donglers (ZBDongle-P/E, Dongle Plus MG24, Dongle Lite MG21). It also supports voice control via Amazon Alexa and Google Home. Integration with Apple Home is only possible via Matter Bridge - requires a compatible Matter gateway and a suitable environment (e.g. eWeLink CUBE).Safety, durability and easy operationA housing made of fire-resistant PC plastic, overvoltage and overheat protection, and a long-life relay (up to 100,000 cycles) make the switch suitable for heavy daily use. CE and RoHS certifications confirm the high quality of manufacture. The switch fits standard type 86 mounting boxes and European round boxes (Ø60 mm). Configuration is done in a few steps in the eWeLink app - a compatible ZigBee hub is required for operation, which allows the device to communicate with the smart home system. The SONOFF MINI-ZB2GS-E also supports remote OTA software updates, allowing you to develop its features without disassembly.Included: SONOFF MINI-ZB2GS-E ZigBee two-channel wall switch Mounting screws User manual Manufacturer SONOFF Model MINI-ZB2GS-E Communication protocol ZigBee (IEEE 802.15.4) Housing material PC Operating temperature from -10°C to 40°C Power supply / electrical parameters 110-240 V~50/60 Hz10 A / channelmax. 16 A total

GameSir-T4n Lite Wireless Controller (white)GameSir-T4n Lite is the ideal choice for those looking for a controller that combines durability, precision and advanced features. With Hall effect sticks, analog triggers, three connectivity options and wide compatibility, this controller will meet the needs of any gamer, regardless of the platform they use. Add to this the stylish design and comfort of use, and you have a controller that will become your indispensable companion in every game. Enjoy gaming at the highest level with GameSir-T4n Lite!Exceptional durability and precisionEquipped with Hall effect sticks, the controller offers unparalleled durability and precise control. Thanks to this innovative technology, you can say goodbye to the problem of drifting sticks, a common affliction in other controllers. The GameSir-T4n Lite also features analog triggers that provide accurate and smooth control for complete dominance in any game.Versatility and gaming comfortGameSir-T4n Lite offers gamers flexibility with three connectivity options: Bluetooth, wireless dongle and USB-C. This versatility allows you to easily switch between devices for seamless gameplay across platforms. Compatible with desktops, Steam, Nintendo Switch platforms, as well as iOS and Android devices, the GameSir-T4n Lite enables true cross-platform gameplay, minimizing lag and ensuring that every game runs smoothly.Advanced features for better gamingThe T4n Lite controller is equipped with a 20 Hz Turbo function with customizable buttons, including A/B/X/Y/LB/LT/RB/RT, allowing gamers to enjoy even more dynamic gameplay. The ability to turn the Turbo function on or off with a single button (M) provides convenience and responsiveness during intense gaming moments. In addition, the M button allows easy adjustment of various settings, such as vibration intensity, ABXY key layout and stick dead zone, giving gamers full control over their preferences.Style and functionalityGameSir-T4n Lite not only impresses with its functionality, but also with its style. This controller is a great tool for gaming and a fashionable accessory that will easily fit into any interior. Compact dimensions and high-quality materials ensure comfortable use and long life of the equipment, which is crucial for any gamer. Thanks to 2 motors in the handles, the controller provides realistic vibrations that increase immersion and the feeling of participation in the game.Included controller pc receiver user manual Manufacturer GameSir Model T4n Lite Color white Compatible platforms Steam, Android, iOS, Switch, desktops Connectivity Bluetooth, wireless dongle, USB-C Battery capacity 600 mAh ABXY keys membrane Vibration actuators 2 Dimensions 155 x 104 x 61 mm Weight 205g

Song in the Smoke is a single-player survival adventure game set in a vast,  beautiful, and deadly world outside of time. Your skill is the key to survival as you stalk and hunt prey with hand-crafted primitive weapons and tools. Forage for food, medicine, and supplies by day and remember to keep your campfire lit throughout the dark, dangerous nights. Establish camps wherever you deem fit as you explore and survive this immersive world created from the ground up exclusively for VR. Song in the Smoke: Rekindled has been completely remastered to take full advantage of all new PlayStation 5 features, including high-fidelity graphics, 4K HDR with 120fps performance mode, headset rumble, haptic feedback and adaptive triggers, gaze tracking, and a new free-jump locomotion mode.  Contains physics-based melee and range combat with intelligent creatures that behave realistically in a virtual world. Hunting: String bows to hunt your own prey, tracking their footprints and scents on the wind. Then hide among the ferns and bushes to line up the perfect shot, aiming naturally with your controllers before letting your handcrafted arrow fly. Foraging: Find food, water, and the raw materials needed to build shelter and fire, as well as craft weapons and other items is essential for survival. Exploring: The wide open world of Song in the Smoke begs exploration, and moving through it requires curiosity and wit to unravel nature’s many mysteries. Maximizing Resources: If you make the kill, make sure nothing is wasted. Stock up on meat, bones, and skins that you can use to keep yourself warm as you move through the world of Song in the Smoke, travelling from lush forests, through ancient valleys, to frozen glaciers.

SONOFF MINI-ZB2GSL-E ZigBee two-channel wall switch (without neutral wire)SONOFF MINI-ZB2GSL-E is a state-of-the-art ZigBee 3.0 two-channel wall switch designed specifically for installations without a neutral wire (No Neutral). It allows independent control of two lighting circuits, offers support for scenes, schedules and voice control, while maintaining a minimalist, aesthetically pleasing flush-mount design. It is an ideal solution for upgrading older electrical installations without the need for additional wiring.Installation without a neutral wire - maximum possibilitiesThe switch is designed to operate without connecting an N wire, which significantly simplifies installation in older buildings and apartments. It does not require an additional capacitor, making installation faster and simpler. The minimum load per channel is 3 watts, which ensures stable operation with most standard light sources. Note: the switch is designed to control classic lighting only - it is not compatible with smart bulbs, dimmable bulbs or inductive loads.Two channels, scenes, schedules and moreThe dual-channel design allows you to control two independent circuits, such as a ceiling lamp and a wall lamp, or two light zones in one room. This solution guarantees fewer switches on the wall, greater visual consistency and convenience of use - both manually and from the app. The MINI-ZB2GSL-E also supports smart scenes, schedules and timers, enabling full lighting automation. There is also a Power-On State function, which allows you to specify the behavior of the light after a power outage and return - such as leaving it off or turning it on with a delay. This is a practical solution for increased comfort and safety of use.ZigBee Binding - fast and reliable local controlThe device supports ZigBee Binding, which is the direct linking of a switch to another ZigBee device (e.g. a relay or lighting) in systems such as Home Assistant (ZHA, Zigbee2MQTT). This makes control local without the cloud, ensuring immediate response and reliability even in the absence of internet.Broad compatibility with smart home platformsThe switch works with the eWeLink app and Home Assistant (ZHA and Zigbee2MQTT). It is compatible with a wide range of ZigBee hubs, including Zigbee Bridge Pro, Zigbee Bridge Ultra, iHost, NSPanel Pro and popular ZigBee dongles (ZBDongle-P/E, Dongle Plus MG24, Dongle Lite MG21). It supports voice control via Amazon Alexa and Google Home, and integration with Apple Home is possible via Matter Bridge (a compatible Matter gateway is required, such as in the eWeLink CUBE ecosystem). The MINI-ZB2GSL-E operates as a ZigBee end device (end device) and does not act as a network router.Safety, durability and ease of installationA housing made of fireproof PC plastic, overload protection and a long-life relay (up to 100,000 cycles) ensure safe and stable use for years. The device complies with CE and RoHS standards and fits standard type 86 mounting boxes and European round boxes (Ø60 mm). Configuration is done in a few steps in the eWeLink app - a compatible ZigBee hub is required for operation. The device also supports remote OTA software updates, which enable feature development without disassembly.Included: SONOFF MINI-ZB2GSL-E ZigBee two-channel wall switch (without neutral wire) Mounting screws Operating instructions Manufacturer SONOFF Model MINI-ZB2GSL-E Communication protocol ZigBee (IEEE 802.15.4) Housing material PC Operating temperature from -10°C to 40°C Power supply / electrical parameters 110-240 V~50/60 Hz8 A / channelmax. 12 A total (resistive load) Dimensions 86 × 86 × 33.7 mm

Habotest HT118C Universal MultimeterThe Habotest universal meter is an indispensable tool that provides precise measurement of parameters such as voltage, continuity or temperature, among others. The backlit display makes it easy to use. The built-in flashlight will allow you to work also in dark rooms, and with a special stand you can safely place the device on a flat surface. The product is also equipped with NCV sensors for non-contact voltage measurement. The meter supports manual range selection.Measures many different parametersThe HT118C has many useful functions. You can use it to measure AC and DC voltage, capacitance, and temperature from -40°C-1000°C, among other things. You can also check whether a cable is live and check for continuity. But this is not the end of the possibilities! The meter also allows for non-contact NCV voltage measurement.Clear display and practical backlightOperation of the device is very simple. The measurement results are displayed on a clear LCD screen, which has a double backlight. If the voltage value exceeds 80V or the current value exceeds 1A, its color will change to orange. Moreover, the meter has a jack input port LED indicator.Additional featuresHabotest HT118C also supports other useful functions, such as max/min and diode testing, for example. You can also check the true RMS value with it. It also allows you to store data. Moreover, it offers a battery testing function (1.5/9V).Long run timeThe device requires 2 AA batteries to power it. Moreover, you don't have to worry about the meter discharging prematurely. Even if you forget to turn it off, it will automatically stop working after a while of inactivity. The HT118C will take care of everything for you!Thoughtful designThe device is light and handy - it fits perfectly in your hand and provides comfort of use. Thanks to the built-in flashlight you can use it comfortably and safely even in poorly lit rooms. The meter is also equipped with a folding stand placed at the back, which allows you to place it on a table or shelf. Brand Habotest Model HT118A HT118C DC voltage (range + accuracy) 600 mV ±(0.5%+3);6/60/600/1000 V ±(0.5%+3) 600 mV/6 V/60 V/600 V/1000 V ±(0.5%+3) AC voltage (range + accuracy) 600 mV ±(1.0%+5);6/60/600/750 V ±(1.0%+5) 6/60/600/750 V ±(1.0%+5) DC current (range + accuracy) 600 uA/6000 uA/60 mA/600 mA ±(0.8%+3);6/10 A ±(1.2%+3) 60 uA/60 mA/600 mA ±(0.8%+3);10 A ±(1.2%+3) AC current (range + accuracy) 600 uA/6000 uA/60 mA/600 mA ±(1.0%+3);6 A/10 A ±(1.5%+3) 60/600 mA ±(1.0%+3);10 A ±(1.5%+3) Resistance (range + accuracy) 600 ꭥ/6 kꭥ/60 kꭥ/600 kꭥ/6 Mꭥ/60 Mꭥ ±(0.8%+3) 600 ꭥ/6 kꭥ/60 kꭥ/600 kꭥ/6 Mꭥ/60 Mꭥ ±(0.8%+3) Capacitance (range + accuracy) 10 nF/100 nF/1 μF/10 μF/100 μF/1 mF/10 mF ±(4.0%+3); 100 mF ±(5.0%+5) 10 nF/100 nF/1 μF/10 μF/100 μF/1 mF/10 mF ±(4.0%+3);100 mF ±(5.0%+5) Frequency (range + accuracy) 10 Hz/100 Hz/1 kHz/10 kHz/100 kHz/1 MHz/10 MHz ±(1.0%+3) 10 Hz/100 Hz/1 kHz/10 kHz/100 kHz/1 MHz/10 MHz ±(1.0%+23) Duty (range + accuracy) 1-99% ±(1.0%+2) 1-99% ±(1.0%+2) Temperature (range + accuracy) -40°C-1000°C ±(1.0%+3);-40°F-1832°F ±(1.0%+3) -40°C-1000° ±(1.0%+3);-40°F-1832°F ±(1.0%+3) Counts 6000 6000 Auto/manual range Automatic Manual Display LCD LCD Bargraph Yes No Live test Yes, audible and light alarm Yes, audible and light alarm NCV Yes, audible and light alarm Yes, audible and light alarm Diode test Yes Yes Continuity Yes, audible and light alarm Yes, audible and light alarm Max/min Yes Yes Data storage Yes Yes True RMS Yes Yes Bandwidth 1 kHz 1 kHz Battery testing (1.5V/9V) No Yes Low battery indicator Yes Yes Automatic power off Yes Yes Double color backlight Yes Yes Input jack LED indicate Yes Yes Flashlight Yes Yes Power supply 2x AA battery(included) 2x AA battery (uncluded) Weight Appx. 350 g About 350 g Dimensions 188x88x58 mm 188x88x58 mm Safety EN61010-1,-2-030;EN61010-2-033;EN61326-1 CAT III 1000 V, CATIV 600 V EN61010-1,-2-030;EN61010-2-033;EN61326-1 CAT III 1000 V, CATIV 600 V , Miernik