ITX Case

Darkflash C285MP computer case (black)The Darkflash C285MP case is distinguished by its double-sided 0.7 mm thick tempered glass panels, which provide a full view of the installed components while guaranteeing the strength of the design. It is compatible with mATX and ITX motherboards and allows for the installation of up to 9 120mm fans or a combination with 140mm fans, providing ample cooling performance. It also supports water cooling up to 360 mm and offers space for a graphics card up to 410 mm in length and CPU cooling with a maximum height of 160 mm, making it suitable for demanding gaming and professional configurations.Double-sided tempered glassThe Darkflash C285MP features 0.7mm thick tempered glass panels on both sides for component protection and aesthetic appeal. The transparent sides allow a full view of the interior and expose components - you can, for example, mount fans with RGB backlighting. Note: the chassis itself does not have pre-installed backlighting.Advanced cooling optionsThe Darkflash C285MP supports the installation of up to 9 120mm fans or a combination with 140mm fans, allowing you to effectively dissipate the heat generated by your components. Coolers of up to 360 mm can be mounted on the top and bottom walls, increasing water cooling options. The case is compatible with a variety of heatsink configurations, so you can personalize your cooling system.Thoughtful internal designSpace for graphics cards up to 410 mm in length and CPU cooling with a maximum height of 160 mm allows you to install advanced components. The case is designed for convenient access to all components, and numerous mounting points make cable management easy. This allows you to keep its interior tidy, which translates into better air circulation and cooling efficiency.Support for various drive configurationsThere will be hard drive and SSD slots at your disposal, allowing you the flexibility to customize your storage. Up to two 3.5" HDDs and three 2.5" SSDs can be mounted at a maximum. - Such a layout is optimal for both gamers and those working with large amounts of data.Convenience of useThe top panel of the chassis features two USB 2.0 ports and one USB 3.0 port for quick and convenient access to peripherals such as portable drives and controllers. The I/O panel also includes HD audio ports, as well as power, reset and LED backlight control buttons for convenient system control without having to open the case. Manufacturer Darkflash Model C285MP Enclosure type Midi Tower Side panel Tempered glass Motherboard standard M-ATX, ITX Power supply standard ATX at the bottom Slots for internal drives 3.5'' HDD x1/x2; 2.5'' SSD x3; Expansion card slots 5 Max PSU length 240 mm Max length of graphics card 410 mm Max height of CPU cooler 160 mm Max number of fans 9 Fan mounting options Top: 120 mm x3 / 140 mm x2; Side: 120 mm x2 / 140 mm x2; Bottom: 120 mm x3; Rear: 120 mm x1; Water cooling mounting options Side: 120 mm / 240 mm / 280 mm; Top: 120 mm / 240 mm / 280 mm / 360 mm; Bottom: 120 mm / 240 mm / 280 mm / 360 mm; Number of fans installed NO FANS INSTALLED Type of fans No fans installed Buttons and controls LED, Power, Reset Connectors USB 2.0 x2, USB 3.0 x1, HD Audio Material 0.7 mm SPCC Color Black Height 370 mm Width 285 mm Depth 440 mm Weight 8.42 kg

Model: Z3 Iceberg White Case Form Factor: ATX Mid- Tower Dimensions: 410(D) x 210(W) x 480(H)mm Weight: 6.4kg Materials: Plastic, Steel, Tempered Glass Motherboard Support: E-ATX (~280mm)/ATX/ M-ATX / Mini-ITX PCI Expansion Slots: 7 Drive Bays: 2 x 3.5" (2 x Combo, 1 x Toolless), 4 x 2.5" Fan Support: Top : 2 x 120mm / 2 x 140mm Front : 3 x 120mm / 3 x 140mm Rear :1 x 120mm Fan(s) Included: Front : 1 x 120mm (Addressable RGB) Rear : 1 x 120mm (Addressable RGB) I/O Ports 1 x Headphone, 1 x Mic, 1 x USB 2.0, 2 x USB 3.0, Power Button, Reset Button, LED Button

Technical data Case form factor: ATX Mid-Tower Materials: Steel, plastic, tempered glass Weight: 5.8kg Dimensions: 415(D) x 219(W) x 484(H)mm Motherboard support: ATX / mATX / Mini-ITX Fan support: Front: 3 x 120mm / 3 x 140mm Top: 2 x 120mm / 2 x 140mm Rear: 1 x 120mm Bottom: 2 x 120mm Fan(s) included: Front: 3 x 120mm (with aRGB Effect) Rear: 1 x 120mm (with aRGB Effect) Radiator support: Front: 120mm / 240mm / 280mm/ 360mm Top: 120mm / 240mm Rear: 120mm Max. PSU length: 210mm (Without HDD bay 355mm) Max. VGA length: 355mm Max. CPU cooler height: 162mm Drive bays: 2 x Combo (3.5" or 2.5", 1xToolless) 3 x SSD (2.5“) PCI expansion slots: 7 pcs I/O ports: Power button Reset button 1xHeadphones 1xMIC 1xUSB2.0 2xUSB3.0

Model N5 TF Case Form Factor ATX Mid Tower Dimensions 432 x 200 x 450 (H) mm Weight 3.8 kg Materials: steel, plastic, tempered glass Motherboard support ATX/ mATX/ Mini-ITX Maximum VGA length 365 mm The maximum height of the CPU cooler is 158 mm The maximum length of the power supply unit is 160 mm PCI expansion slots 7 Drive cages 2 x combo (3.5" or 2.5"), 4 x 2.5" Fan support Front: 3 x 120mm Top: 3 x 120mm Rear: 1 x 120mm Bottom: 2 x 120 mm Fan included Front: 3 x 120mm (with Spectrum RGB LED effect) Rear: 1 x 120mm (with Spectrum RGB LED effect) Radiator support Front: 120mm / 240mm / 360mm Rear: 120 mm I/O ports: USB 3.0 x 1, USB 2.0 x 2, Power button, Reset button, Headphone jack, Microphone jack, Fan control (change fan speed and LED brightness), LED control (change LED pattern)

OPTIMIZED AIR FLOW Two 120mm fans aligned vertically on the front to draw in air evenly across the entire face of the enclosure. That will contribute to positive air pressure within the case, the rising warm air will always be exhausted with the rear and top airflow from the MAG Forge 100 Series. READY FOR OPTIMIZED MOTHERBOARD Designed with multiple easy installation mechanisms and accommodated an up to ATX motherboard to provide an unhindered building experience. Support: ATX / Micro ATX / Mini-ITX BUILT FOR A PRIME FAN AND RADIATOR CAPACITY COOLING LAYOUT Front: Up to 3 x 120 mm or 2 x 140 mm Top: Up to 2 x 120 mm or 2 x 140 mm Rear: 1 x 120 mm PRE-INSTALL FAN Front: 2 x 120 mm RGB LED Fan included Rear: 1 x 120mm System Fan included TOOL-LESS TEMPERED GLASSThe light gray tone of 4mm tempered glass side panel is ideal for displaying RGB lighting effects and provides clear internal component construction.   The Forge 100 Series thoughtful case design allows users to install/remove the tempered glass easily. Simply place the tempered glass on the stump of the case before installing it for a safe and simple process.

Construction Form: Midi Tower Type: PC Supported motherboard form factor: ATX, micro ATX, Mini-ITX Number of 3.5" sockets: 2 Material: Plastic, Steel Product color: Black Side window: Yes Number of 2.5" slots: 3 Illumination: Yes Lighting color: White Lighting location: Case fans Reset button: Yes On/Off Button: Yes LED indicators: HDD, Energy Maximum CPU cooler height: 17.5 cm Maximum graphics card length: 36 cm Maximum PSU length: 18 cm Power source Added power supply: No Connection Number of USB 3.0 (3.1 x 1) Type A ports: 1 Audio input: Yes Number of USB 2.0 ports: 2 Audio output: Yes Cooling Supported front fan diameters: 120 mm Equipped with rear fans: 1x 120 mm Front fans installed: 3x 120 mm Maximum number of rear fans: 1 Most front fans: 3 Supported rear fan diameter: 120 mm Maximum number of overhead fans: 2 Supported top fan diameters: 120 mm Liquid cooling capability: Yes Supported front fan sizes: 120.240 mm Weight and dimensions Width: 204 mm Length: 445 mm Height: 479 mm Weight: 4.7 kg

Construction Form: Midi Tower Type: PC Supported motherboard form factor: ATX, micro ATX, Mini-ITX Number of 3.5" sockets: 2 Material: Plastic, Steel Product color: Black Number of 2.5" slots: 3 Side window: Yes Illumination: Yes Lighting color: White Better cable management: Yes Lighting location: Case fans On/Off Button: Yes Reset button: Yes LED indicators: HDD, Energy Transport wheels: No Maximum CPU cooler height: 17.5 cm Maximum graphics card length: 36 cm Maximum PSU length: 18 cm Power source Added power supply: No Power source location: Bottom Connection Number of USB 3.0 (3.1 x 1) Type A ports: 1 Audio input: Yes Number of USB 2.0 ports: 2 Audio output: Yes Cooling Supported front fan diameters: 120 mm Equipped with rear fans: 1x 120 mm Front fans installed: 3x 120 mm Maximum number of rear fans: 1 Most front fans: 3 Supported rear fan diameter: 120 mm Maximum number of overhead fans: 2 Supported top fan diameters: 120 mm Liquid cooling capability: Yes Supported front fan sizes: 120.240 mm Media Supported hard disk size: 2.5,3.5" SSD form factor: 2.5" Weight and dimensions Width: 204 mm Length: 445 mm Height: 479 mm Weight: 4.7 kg

Design Form factor: Midi Tower Type: PC Supported motherboard form factors: ATX, micro ATX, Mini-ITX Number of 3.5" bays: 2 Material: Plastic, Steel, Tempered glass Colour of product: Black Number of 2.5" bays: 6 Side window: Y Number of expansion slots: 7 Illumination: Y Tempered glass panel(s): Y Illumination colour: Red/Green/Blue Cable management: Y On/off button: Y Illumination location: Case fans, Front Reset button: Y Maximum CPU cooler height: 16.3 cm Maximum graphics card length: 34 cm Maximum PSU length: 19 cm Power supply Power supply included: N Ports & interfaces USB 3.0 (3.1 Gen 1) Type-A ports quantity: 1 Audio input: Y USB 2.0 ports quantity: 2 Audio output: Y Cooling Front fans diameters supported: 120,140 mm Rear fans installed: 1x 120 mm Top fans diameters supported: 120,140 mm Maximum rear fans: 1 Maximum front fans: 3 Rear fans diameters supported: 120 mm Maximum top fans: 2 Front fans installed: 1x 120 mm Liquid cooling capability: Y Number of bottom fans supported (max): 2 Front radiator fan sizes supported: 240 mm Bottom fans diameters supported: 120 mm Top radiator fan sizes supported: 240 mm Weight & dimensions Width: 212 mm Depth: 398 mm Height: 465 mm Weight: 5.8 kg

Meet the Genesis Irid 505F the first Genesis case with five Genesis Oxal 120 fans which will provide good ventilation and extensive installation options for water cooling systems (AIO 280/360).  Low temperatures? From now on, they will become a norm.Temperatures as low as never beforeChoose Genesis Irid 505F and take advantage of the possibility of choosing your dream components and ventilation that will allow you to cool components even with a ~ 500 W of power. This is thanks to five Genesis Oxal 120 fans, a large amount of space around the graphics card, ability to mount standard air coolers with a maximum height of up to 165 mm, as well as the option to install efficient AIO water cooling systems.New Genesis Oxal 120 fansHigh cooling performance? It will be taken care of by five pre-installed Genesis Oxal 120 fans with a maximum speed of 1300 rpm. Three of them (pumping air inside) can be found on the front of the Genesis Irid 505F, while the other two (extracting) in its rear part.  Thanks to this configuration, you can count ideal pressure inside the case which in combination with full filtering protects it even better against dust inside the case.  Do you want a balance between performance and silence? With the Genesis Oxal 120 mm you can achieve it by setting them to up to 80% of their rotational speed.Compatible with AIO water coolingWide possibilities of mounting ready-made water cooling sets are one of the biggest advantages of Genesis Irid 505F. The front of the housing will allow you to mount AIO 240/280 and 360 kits, also with a thicker radiator.  On the top, you can install AIO 240/280 with a standard cooler (~27 mm) or "thicker" AIO 240 (with a cooler ~ 38 mm) without colliding with the motherboard or RAM. Bet on qualityChoose a robust chassis that fits your components with ease. Enjoy a unique look, tempered glass window and thoughtful two-chamber design. Take care of the appearance of your computer with numerous rubber bushings and screws, which you can safely disassemble with just a few movements.Build your dream PCChoose powerful components and build your dream computer. The Genesis Irid 505F case guarantees you several solutions that will allow you to mount your components in a logical way.  Compatibility with ATX, Micro-ATX, Mini-ITX motherboards, five slots for 2.5" SSDs, and two 2.5/3.5" hybrid slots is not everything. A big advantage of Genesis Irid 505F is also a larger space for the graphics card (up to 380 mm long and ~167 mm wide), facilitating its proper ventilation.Even less dustAre you constantly fighting a tiresome battle with dust getting inside? Genesis Irid 505F is a housing in which the meshes of the front mesh are smaller (

Durable, elegant, efficient. In short? GENESIS Diaxid 605F. Discover the case we created with fans of low temperatures and high performance in mind. Compatibility with AIO 420 coolers, up to 5 GENESIS Oxal 120 fans and full dust filtration. In addition, wide possibilities of mounting components. Take the challenge and see how easy it is to build a dream computer with GENESIS Diaxid 605F. AS MANY 5 GENESIS OXAL 120 fans Discover GENESIS Oxal 120 our most efficient fans, which will provide the efficiency of a standard fan (1400 RPM) even at much lower speeds. What does this mean for you? Silence and optimal temperatures even on the hottest days. Up to 3 of them (push air in) can be found at the front, while the remaining 2 (exhaust) in the rear. Thanks to this configuration, you can count on positive pressure inside the case, which, combined with full filtration, provides even better protection against dust. Not enough? Additional space at the top and 2 spaces at the bottom of the case will allow you to easily expand the unit according to your own preferences (including mounting up to 3 140 mm fans on the front). Compatibility with AIO 420 Are you looking for a case that will give you complete freedom in mounting one-piece water cooling? With GENESIS Diaxid 605F you will see how easy it is. The front of the case will allow you to mount AIO 420/360/280/240/120 sets (including with a radiator thickness of up to ~27 mm on the front in the case of AIO 420). On the top, in turn, you can count on mounting AIO 280 with a standard radiator (~27 mm) or thicker AIO 240/140/120 (with a radiator ~38 mm). The back will also allow you to mount a classic AIO 120. Easy and fast. With possibilities in mind GENESIS Diaxid 605F is a model that we created with the possibilities of building efficient units in mind. This means not only excellent cooling properties, but also the possibility of mounting components in a fully thought-out way. Compatibility with ATX, microATX, mini-ITX boards, 2 slots for 2.5 SSDs, 1 slot for 3.5 HDDs and 1 hybrid 2.5"/3.5 slot. In addition, graphics cards with a maximum length of ~351 mm and tower coolers with a height of ~168 mm. Choose a case that will meet your expectations. Get rid of dust With the GENESIS Diaxid 605F you don't have to worry about dust. Magnetic filters placed on the top and bottom of the case will protect your components from its action. If necessary, you can easily wipe them with a damp cloth, getting rid of dirt in just a few seconds. The whole is complemented by a front mesh panel, the mesh of which is smaller (~0.8 mm) than in standard filters. Greater density means benefits in the form of better filtering properties and less dust inside. Functionality is its second name You benefit from USB ports and functionality is important to you? Great. At the top of the GENESIS Diaxid 605F you will find not only a modern USB-C port (Gen 2 up to 10 Gbit/s), but also 2 × USB Type A (3.2 Gen 1). You can also easily plug in an audio set with a separate input for audio and microphone (2 × 3.5 mm). Numerous grommets, a basement and rubber covers are the elements that make the GENESIS Diaxid 605F functional inside. Thoughtful and aesthetic assembly of components has never been so easy.