Lithium rechargeable battery

K&F CONCEPT SONY NP-FW50 Replacement Battery Charger Set. Charging kit includes two 7.4V 1100mAh Sony NP-FW50 replacement batteries and Micro USB/Type C dual interface charger, supports wall charger, car charger or mobile power charging. Easy to carry when you go out and record exciting moments at any time without worrying about power failure. * 【Compatibility】K&F CONCEPT's NP-FW50 battery is compatible with Sony cameras that use NP-FW50 battery, such as Sony Alpha 7, A7, Alpha 7R, A7R, A7R II, A7 II, A7S, A7S II, A7M2, A7SM2, A7RM2, A5000 A6000 A6300 A6500, a3000 , NEX-3, NEX-3N, NEX-5, NEX-5C, NEX-5N, NEX-5R, NEX-5T, NEX-6, NEX-7, NEX-C3, NEX-F3, SLT-A33, SLT -A35, SLT-A37, SLT-A55V, Cyber -shot DSC-RX10, etc. (Note: The above are only some of the models listed) * 【Safety】 Using high-quality batteries, strict inspection standards, safe and reliable, rest assured that charging and use, with multiple circuit protection to prevent battery overcharge, over-current protection, over-discharge protection, over-voltage protection, short-circuit protection, over-power protection, high-temperature protection, recovery protection. - Two batteries fully charged at the same time time time: about 2.5h - Operating temperature: less than 60°C. * 【High capacity Long lasting life】2pcs 7.4V 1100mAh high capacity batteries. High-quality cells, CE/RoHS/FCC certified; no memory effect, long-lasting battery life. * 【Convenient and quick】Charging kit includes two 7.4V 1100mAh Sony NP-FW50 replacement batteries and Micro USB/Type C dual interface charger, supports wall charger, car charger or mobile power charging. Easy to carry when you go out and record exciting moments at any time without worrying about power failure. * 【Intelligent charging】LCD dual charger accurately displays the battery charging status, the charging process uses an intelligent chip to better protect the battery; dual-slot charging port can quickly charge two batteries at the same time, greatly saving your time and is the best choice for traveling. K&F CONCEPT SONY NP-FW50 Replacement Battery Charger Set Note: 1. Cameras are not included • The charging set includes two 7.4V 1100mAh SONY NP-FW50 replacement batteries and Micro USB/Type C dual interface charger, which is easy to carry when traveling and record any wonderful moment. • Original standard: It is manufactured according to Canon SONY NP-FW50 battery standard, with a slightly larger capacity than the original battery, and can be charged using the original charger. • High quality cell with CE/RoHS/FCC certification; No memory effect, long endurance. • Packaging: SONY NP-FW50 replacement battery *2, double charger *1 for NP-FW50 battery, Micro USB cable *1. Safe and reliable, assured charging and use With multiple circuit protection, prevent battery overcharge, overcurrent protection, overdischarge protection, overvoltage protection, short circuit protection, over power protection, high temperature protection, recovery protection. Compatibility K&F CONCEPT's NP-FW50 battery is compatible with SONY cameras that use NP-FW50 batteries, For example, Sony Alpha 7, A7, Alpha 7R, A7R, A7R II, A7 II, A7S, A7S II, A7M2, A7SM2, A7RM2, A5000 A6000 A6300 A6500, a3000, NEX-3, NEX-3N, NEX-5, NEX-5C, NEX-5N, NEX-5R, NEX-5T, NEX-6, NEX-7, NEX-C3, NEX-F3, SLT-A33, SLT-A35, SLT-A37, SLT-A55V, Cyber-shot DSC-RX10, etc. (Note: Only some models are listed above) With Micro USB and Type C dual interface charger, support a variety of charging methods It can be charged by mobile phone charger, portable power supply, notebook, power bank and so on • Product type: double-slot electrical appliance; Current input: 5V/2.1A; • Output (1 battery) : 8.4v/700mA; Output (2 batteries) : 8.4v/500mA • Ports: Micro-USB and Type-C ports (excluding Type-C charging cable) NP-FW50 rechargeable lithium-ion battery SONY NP-FW50 battery is the best replacement. • 7.4v 1100mAh rechargeable lithium-ion battery for longer power and durability. • High quality cell

High-quality lithium-ion battery For Ricoh GR III camera High capacity of 1800 mAh Lasts long on a full charge Recharges quickly

FNIRSI LCR-ST2 LCR TesterWorking with electronic components requires a tool that combines accuracy, speed, and ease of use. The FNIRSI LCR-ST2 offers a wide range of measurement capabilities, support for multiple frequencies and test voltage levels, intelligent analysis functions, and two methods for connecting the components under test. A clear color display with automatic image rotation, a compact tweezers-like design, and a rechargeable battery providing up to approximately 3 hours of operation make this device ideal for both service stations and field work. This versatile tester facilitates the diagnosis of individual components and the batch testing of electronic components.Wide measurement range and comprehensive parameter analysisThe tester enables precise measurements of resistance in the range from 10 mΩ to 10 MΩ, capacitance from 1 pF to 22 mF, inductance from 1 μH to 10 H, voltage up to ±30 V, and diodes with a forward voltage up to 0.7 V. In addition to basic values, the device also displays key electrical parameters such as D, Q, Z, X, θ, and ESR, enabling a comprehensive analysis of the tested component’s properties. Automatic recognition of resistors, capacitors, and inductors further speeds up the process by eliminating the need to manually select the measurement type.Flexible settings for various applicationsThe FNIRSI LCR-ST2 allows you to adjust the measurement conditions to the type of component being tested. Five test frequencies (100 Hz, 120 Hz, 1 kHz, 10 kHz, and 100 kHz) are available, enabling professional analysis of many types of electronic components. Additionally, you can select one of four RMS test voltage levels (0.1 V, 0.3 V, 0.6 V, or 1.0 V) to increase measurement stability and accuracy depending on the characteristics of the component under test.Intelligent Features to Speed Up DiagnosticsThe device is equipped with a full-band scanning mode ranging from 100 Hz to 100 kHz, which enables rapid analysis of a component’s frequency response with a single measurement. The tester also offers an intelligent function for sorting components according to specified nominal values and tolerances, automatically classifying them as compliant or non-compliant with requirements during mass production testing. An additional advantage is the simultaneous display of equivalent values in series and parallel configurations, which helps minimize the impact of parasitic parameters and increases the accuracy of the results. The practical HOLD, Max, and Min functions allow you to conveniently record and analyze measurement results. The device also enables the simultaneous display of two measurement parameters, which facilitates the analysis of results.Two Measurement Methods and Ease of UseThe LCR-ST2 model combines a tweezers design with the option to use a Kelvin probe. Straight and curved probe tips make it easy to grip small surface-mounted components, while the Kelvin clamp enables precise four-wire measurements of larger components and through-hole components. User comfort is enhanced by a 1.47-inch HD color display with an auto-rotate feature that adjusts the orientation to match how the device is held, ensuring comfortable operation for both right- and left-handed users. The magnetic mount makes it easy to store the tester and keeps it within easy reach at all times.Mobile, ready-to-use designThe lightweight, tweezers-style housing makes the tester ideal for use in the lab, in service, and in the field. The built-in 300 mAh lithium battery provides up to approximately 3 hours of continuous operation, and the modern USB-C port allows for convenient charging of the device. Additionally, the tester supports voltage measurements up to ±30 V, making it suitable for both everyday diagnostics and more advanced electronic applications.Included LCR tester storage case curved probe shorting plate data cable user manual Manufacturer FNIRSI Model LCR-ST2 Standby time approximately 3 hours Display 1.47" HD Weight approxim

Oneisall RFC-676 PRO pet shearing machineThe Oneisall RFC-676 PRO is a reliable tool for pet owners and professional groomers that provides even and precise clippings. Thanks to its powerful motor, metal attachments and ergonomic design, the device can handle even dense hair, offering maximum convenience of use.Metal attachments - durability and precisionUnlike plastic counterparts, metal comb attachments are much more resistant to wear and deformation. They provide stable and professional control over the length of the cut, which translates into evenly trimmed hair. Durable design minimizes the need for frequent cap replacement, saving you time and money.Safe and gentle on the skinThanks to its carefully designed blade edges and metal caps, the razor protects your pet's skin from irritation and scratches. It is an ideal choice for dogs and cats with sensitive skin and for breeds with dense, high-maintenance coats.Cordless designThe razor is equipped with a 2000 mAh rechargeable lithium-ion battery, which provides up to 3 hours of continuous use when fully charged. The cordless design allows for convenient use both indoors and outdoors, without being limited by the length of the cord.Powerful motorThe 6,800 RPM motor ensures smooth and efficient operation, allowing easy clipping of even the most demanding hair. The razor can handle any hair texture, whether it's fine cat fur, short dog hair or coarse hair that requires more power.Quiet and safe for your petThe razor works extremely quietly - its noise level is only 55 dB, which means it won't stress noise-sensitive pets. Thanks to its low vibration and optimal blade temperature, the device does not overheat, protecting your pet's delicate skin and keeping it comfortable during shearing.Waterproof and easy to cleanThanks to its IPX7 waterproof rating, the entire razor can be safely rinsed under running water. This makes cleaning and maintenance of the device much easier, making it ready to use at any time. It only takes a few moments to remove hair and other dirt, without having to disassemble complicated components.Included clippers charging station USB charging cable comb attachments x4 (3/10/16/25 mm) cleaning brush blade oil Manufacturer Oneisall Model RFC-676 PRO Weight approx. 322 g Dimensions approx. 18 x 6 x 5 cm Charging time 3 h Charging USB cable/docking station

A versatile and portable light Can be placed on a table, clamped or held in hand Even and natural light, four lighting modes The rechargeable lithium battery lasts up to 40 hours Minimalist and compact design

Features PS4, PS3 and PC (X-Input and Direct Input) compatible Bluetooth joystick Programmable RGB LEDs Smartphone-style vibration motors for weight saving 2 directional cross-hairs available Built-in rechargeable Lithium-Ion battery, charge cable included Colour: Black Bluetooth: Yes

Fanttik E1 Max 3.7V(silver) electric screwdriver setFanttik E1 Max 3.7V is a precision electric screwdriver designed to work on delicate parts such as phones, watches, cameras, etc. It combines a compact design with high torque accuracy, providing secure and controlled tightening of small screws. Not designed for desktop computer assembly.Precise torque adjustmentThe device offers three operating modes: high torque of 0.2 Nm, low torque of 0.05 Nm and manual of 3 Nm. Such parameters allow you to adjust the force according to the type of work to be done, which protects components from damage and enables accurate tightening.Set of 50 bitsThe set includes 50 bits in 9 types, made of hardened S2 steel (S2 type alloy steel), which increases their durability and resistance to wear. The rich selection of bits makes it possible to complete a wide range of repairs in one set.Magnetic caseA built-in magnetic holder keeps bits organized and prevents bits from getting lost, and the case's slide-out mechanism provides quick access to tools. The magnetic holder and bits provide a stable hold while working.Powerful battery and fast chargingThe long-life battery allows you to drive up to 400 screws on a single charge. The USB-C (Universal Serial Bus Type-C, a universal connector for data and power) port provides fast and convenient charging, and the up to 200 RPM motor allows you to efficiently complete more intensive tasks.Built-in lightingFour built-in LEDs (Light Emitting Diode) illuminate the work area, eliminating shadows and making it easier to work in poorly lit areas. Intuitive controls - a button on the front for screwdriving and on the back for unscrewing - allow for convenient one-handed operation.Included tweezers USB-A to USB-C cable instruction manual undermining tool electric precision screwdriver magnetic case for storing bits x50 bits aluminum alloy case Manufacturer Fanttik Model E1 Max Color silver Torque 2 levels 0.05 / 0.2 N.m Purpose minor repairs, e.g. of a camera or a watch Magnetic bits S2 50 pieces Rotational speed 200 rpm Battery capacity 350 mAh LED lighting Yes Weight 421 g Dimensions of screwdriver 159 x 16.4 mm Charging time 160-200 min Maximum torque - low level (L) 0.05 Nm Maximum torque - high level (H) 0.2 Nm Maximum torque in manual mode 3 Nm Charging power 5 V ⎓ 0.14 A Rated voltage 3,7 V Rechargeable battery Lithium, 350 mAh Speed (no load) 200 rpm

The Ricoh DB-120 1800mAh lithium-ion battery is made for the GR IV. From a full charge, it enables up to 250 still images or about 240 minutes of playback before you need to recharge.

functions Compact Bluetooth speaker Bluetooth 5.0 FM radio with automatic station search 87.8-108MHz MP3 player Support for Micro SD cards and USB memory devices Scope RGB/FLAME color lighting 5V charging via USB/micro USB cable Built-in rechargeable lithium-ion battery for up to 4 hours 3 inch speaker Power: RMS 14W, PMPO 600W Frequency response: 150~19000Hz Handle for comfortable carrying Dimensions: 180 x 430 x 170 mm Weight: 1.64 kg

K&F CONCEPT Portable LED Video Light, 3000K-10000K Dual Color Temperature Rechargeable, Clip-on Video Light, Suitable for Mobile Phone, iPhone, Android, iPad, Laptop, Suitable for Selfie, Vlog, Video Conference * 【Trinity multi-scene compatibility】: The fill light can be clipped on the screen of a mobile phone, laptop, tablet, or computer, and is equipped with a 1/4 screw hole converter and a cold shoe adapter, and can also be fixed on a camera or a light stand . Meet your different scene needs, can add light to your shooting and lighting. * [Three-color highlight, five-level controllable]: Using 84 high-quality LED lamp beads, including 42 white lamp beads and 42 warm-color lamp beads, the color temperature range is 3000K-10000K, and can provide warm-color light, cool-color light and double-color light , a wider color temperature range. 5 levels of brightness are adjustable, the light is softer and not glaring, allowing you to adjust the brightness you want no matter day or night. * 【High battery life and high restoration】: Built-in 2000mAh high-quality lithium battery, the maximum brightness output can reach 2-2.5 hours, which can meet your normal use needs. CRI≥95, higher degree of lighting restoration, making your pictures more natural and real. It also comes with 4 color filters to provide you with more color choices and help you take photos and videos with different atmospheres. * 【Perfect fit】: The opening width of the clip is 3cm, it can be clipped on any object of suitable size, and it is guaranteed to be firm and not easy to loosen, which can help your fill light to be clipped more firmly on mobile phones, tablets and laptops. * 【Small size and control at will】: The size of the lamp body is 90*65*15mm, which is only the size of an adult woman's palm. It can be carried out in the pocket, so that you can use it in any scene.

Jata MOST3532 Insect killer / Lamp / Torch / Fan / Emergency light 5 in 1 Description The MOST3532 allows you to enjoy an environment without insects and, in addition, it is a lamp, flashlight, fan and emergency light. Features Environmentally friendly 10 ultraviolet LED bulbs to attract and eliminate all kinds of insects Effective range 60 m2 Independent pushbuttons for power on: Ultraviolet light / eliminates insects Lamp with 2 intensities and emergency light Lantern with 2 intensities max 300 lm 2-speed fan, maximum use time 4 h Lithium battery 18650 included Rechargeable: USB cable included / Works with 3 AA batteries (not incl) Charge indicator light and full charge warning Multi-current 110-230 V Power 5 W

High-quality lithium battery For Sony cameras High capacity of 1240 mAh Quick charge Small and lightweight

Digital Display Laser Inclinometer   Features:  High precision angle measuring tool. The inclinometer has become an indispensable and important measuring tool in the fields of bridge, railway paving, civil engineer, construction, decoration, industrial automation, intelligent platform, machining and so on. Bidirectional laser scanning. The bright (Class 2) laser point of the meter will be easily noticeable in both light and dark hours of the day, making it easy to measure the required data. Magnetic pressure seat: five sides of the device are magnetic. Clear illuminated display with battery level indicator. Rechargeable lithium-ion battery, convenient charging via USB Type-C interface. Charging cable is included. Compact shape, easy to use, durable body. Warning: laser radiation - avoid direct eye exposure.  Functions:  Zero point measurement based on horizontal plane. Angle locking function. Relative/absolute angle measurement. Battery level indicator. With data storage function.  Technical data:  Measurement range: 4x 90°. Measurement accuracy +/- 2°. Measurement resolution: 0.02. Sensor type: 6 axis sensor. Laser class: II, 630-670nm. Laser color: red. Power supply: rechargeable lithium-ion battery 3.7V 390mAh. Operating temperature: 0°C ~ +50°C. Automatic device switch-off: 30 min. Material: ABS, magnet. Size: 60x60x30mm. Weight: 118 g.  Warranty: 24 months.  The set includes: inclinometer, built-in battery, charging cable USB Type-A to USB Type-C, user manual.  

Electric toothbrush Solac "Shiny Smile CD7901" Solac Shiny Smile   an electric toothbrush removes significantly more plaque than a manual toothbrush. It also helps to reduce tooth decay and improve the condition of the gums. Ion technology guarantees extremely effective cleaning. The brush is wireless and convenient to charge, and the lithium-ion battery has an extremely high capacity and durability. Distinctive features of the toothbrush: • Revolutions: 31000 rpm. • 3 cleaning modes, including massage. • Timer. • Rechargeable lithium-ion battery. • One charge is enough for up to 30 days.

High-quality rechargeable lithium-ion battery For Panasonic cameras High capacity of 895 mAh