Magnetic Door

SmallRig Dedicated L Bracket for FUJIFILM GFX100 II with VG-GFX100ll Battery Grip 4203 facilitates quick switch between horizontal and vertical shooting. It locks the camera via one 1/4"-20 screw at the bottom and one side lock adapter on the left and comes with two side lock adapters (standard setup / extended setup). In vertical shooting, the side plate does not deform, hence more stability. Its baseplate and side plate feature silicone pads to protect FUJIFILM GFX100 II from scratches. Both have open access to the camera's ports, functions, or buttons, like a battery door, flip screen, cables, FAN-001 cooling FAN, etc. The side plate, in particular, can stretch 18mm to allow cables through when shooting vertically. There are multiple attachment points such as 1/4"-20 threaded hole, 3/8"-16 threaded hole, QD mount, cold shoe, shoulder/hand strap hole that support Shoulder Strap 4118, Microphone 3468, Tripod 3989 / 4307. Besides, a magnetic slotted screwdriver is available for easy accessory mounting.

Magnetic opening detector with tilt and shock sensor. Ajax DoorProtect Plus helps to protect doors and unclosed windows across several floors of a house or office. Detects opening, tilt, and impacts.Maximum performanceWorks up to 1,000 meters from Ajax Hub in open space or across several floors of a business center. Detects inclination angle relative to the ground. Built-in accelerometer reacts to vibration and impacts. Allows for connection to a third-party detector.Protection from intruders and failureUses authentication to protect against fraud. Tamper-resistant body. Response from detectors can be checked every 12-300 seconds (adjustable). Jamming detection, frequency-hopping. Uses an encrypted connection.Smooth operationUses British-made reed switches that can be toggled more than 1,000,000 times without failure. Two-way communication with Ajax Hub allows for periodic testing and customization. Saves energy by regulating power consumption based on the distance from Ajax Hub. Has a battery life of up to 5 years when pinging once per minute.Simple professional-level installationNo need to disassemble the body when installing using SmartBracket mounts. Uses powerful magnets that can be installed up to 2 cm from the main unit. The quality of the connection and detection area can be tested remotely. Connects to Ajax Hub with a single click.Engineering masterpieceIts compact size and powerful magnet make Ajax DoorProtect Plus the ideal detector to protect all types of doors and windows.Technical specificationDetector type: WirelessMounting: Surface-mountedDetecting elements: Reed switch, accelerometerDistance to magnet: Up to 1 cm (0.4 in) (small magnet), up to 2 cm (0.8 in) (big magnet)Use: IndoorCompatibility: Works only with Ajax HubAdditional input to plug in the wire detectors: AvailableTamper protection: AvailableRadio signal power: 20 mWCommunication protocol: Jeweller (868.0-868.6 MHz)Maximum distance between detector and central unit: Up to 1,000 m (6562 ft) (in open area)Power supply: CR123A batteryPower supply voltage: 3 VBattery life: Up to 5 yearsOperating temperature range: From 0°C (+32°F) to +50°C (+122°F)Operating humidity: Up to 80%Dimensions: 20x90 mm (0.78x3.54 in)ComponentsDoor opening/shock/tilt detector2 magnetsCR123A battery (pre-installed)External contactInstallation setManual

Neewer FL-GP15 Magnetic Action Camera Mount. Dual Magnetic Suction Cups: stronger than a single magnet, NEEWER FL-GP15 Magnet Action Camera Mount with dual magnetic suction cups has a maximum payload of 2 kg, and it can firmly adhesive to a car's hood, roof, and door-or any other metallic surface. The included safety tether can attach them to a car's door handle, roof rack, and mirror to prevent falling while on the road.

SmallRig 4231 L-Shape Mount Plate for Fujifilm X-S20 Locking FUJIFILM X-S20 via one 1/4"-20 screw at the bottom, the mounting plate comes with rubber pads that prevent scratches, and a hinge arm at the battery door that fits the camera curve for comfortable grip. This L-Shap grip have a Arca Swiss bottom plate and side plate. The bottom plate, which are Arca Swiss quick-release plate, fits for Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals and have 1/4"-20 threaded holes to support SmallRig Side Handle 2093 & 3847 in vertical shooting, and Quick Release Plate 1280 Strap holes for SmallRig Hand Strap 3848 & 2456 , and built-in QD mounts on the bottom for QD strap buckle. On the side plate, there are 1/4"-20 threaded holes for SmallRig Cold Shoe Mount 2736 for the microphone. The side plate supports SmallRig HDMI Cable Clamp 1693 for stable data transmission and also can be stretched 22mm to allow cables during vertical shooting. It can also adjust back and forth by 7.8mm to enable a 180-degree opening and 120-degree rotation of the LCD flip screen. Besides, a magnetic Allen wrench is included for easy disassembly and assembly. Compability: FUJIFILM X-S20 Package includes: 1x L-Shape Mount Plate

NEEWER TL98C DMX LED Light StickCompact, lightweight, and versatile—the NEEWER TL98C DMX LED Light Stick is designed for creators who want full control over lighting without having to carry heavy equipment. Its compact design houses powerful RGB LEDs and extensive operating modes, allowing you to easily create atmospheric shots for photography, videos, live streams, or content for TikTok and YouTube. App control, the ability to manage groups of lights, special effects, and magnetic mounting make this handy LED light stick suitable for almost any situation.Compact size, huge possibilitiesThe light measures just 108 × 40 × 44 mm and weighs 134 g, so it easily fits in a bag, backpack, or even a pocket. Despite its compact size, it offers impressive lighting capabilities thanks to a set of 36 cool white LEDs, 33 warm white LEDs, and 24 RGB LEDs. With 4.5 W of power and a brightness of up to 360 lux at a distance of 0.5 m, it effectively illuminates the scene, while a CRI of 97 ensures natural color reproduction. The light can operate independently or in combination with multiple units, opening the door to even more impressive lighting setups.Professional control via the appThe NEEWER app allows you to remotely control the light from a distance of up to 15 meters. From the app, you can conveniently adjust brightness, color temperature, and color saturation, as well as select preset lighting effects. The manufacturer has also included more professional features related to DMX control. You can create your own lighting programs, save settings, and control multiple lights simultaneously. The system supports up to 8 groups, and each group can include up to 128 devices, which significantly simplifies the organization of more complex photo shoots and stage lighting setups.Extensive operating modes and special effectsThe lamp offers three main operating modes that allow you to precisely adjust the light to the nature of the scene. In CCT mode, you can adjust the color temperature within a range of 2500K to 10000K. The built-in GM control allows you to further calibrate the light color and match it even more precisely to other lighting sources. HSI mode provides complete creative freedom thanks to 360° color adjustment, brightness control from 0 to 100%, and color saturation settings. Users also have access to 17 scene effects, such as lightning, fireworks, and police car lights, which allow you to instantly set the mood without the need for additional accessories. Operation is made easy by a clear OLED screen and physical buttons located directly on the housing. The lamp also supports OTA updates via the app, allowing its capabilities to be expanded with future software versions.Long runtime and convenient chargingThe built-in 3.7V lithium battery with a capacity of 2600 mAh provides up to 150 minutes of continuous operation at maximum brightness. That’s enough to complete a photo shoot, video recording, or live stream without stress and without having to reach for the charger frequently. A full charge takes about 130 minutes and is done via a 5V 2A USB-C port. Importantly, the device can also operate while charging, allowing for uninterrupted operation even during hours-long recordings or live events.Magnetic Mounting and Full Positioning FreedomThe TL98C DMX is equipped with magnetic sides that allow you to quickly attach the light to metal surfaces. This makes it easy to position the light at an unusual angle, set up overhead lighting, or create creative shots without using additional mounts. There are also 1/4” mounting threads on both ends of the housing, allowing you to mount the light on a tripod, arm, or desk stand. This solution offers great flexibility for both professional photo shoots and everyday content creation.Included TL97C light wand USB Type-C cable User manual Manufacturer Neewer Model TL98C Product type RGB light wand Number of LEDs 36 cool, 33 warm, 24 RGB Maximum power 4.5 W Maximum illuminance 360 lux at a distance

SmallRig L-Bracket for Nikon Z 8 3942 is designed to facilitate a switch between horizontal and vertical modes and to improve grip experience. It locks the camera via one 1/4 "-20 screw at the bottom and one locating pin, with rub pads preventing scratches, and has a hinge arm at the battery door that fits the camera curve to enhance grip. There are multiple accessory mounts: an Arca Swiss quick-release plate for Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals, 1/4"-20 & 3/8"-16 threaded holes at the bottom that support Side Handle 2093 & 3847, Quick Release Plate 1280, and strap holes for Hand Strap 3848 & 2456. The L-Bracket also features a QD mount to attach the QD strap buckle, 1/4"-20 threaded holes, suitable for Cold Shoe Mount BUC2736 for the microphone, as well as a 23mm stretchable side plate that allows cables through in vertical shooting. Besides, a magnetic wrench is included for easy disassembly and assembly. 1. Arca-Swiss quick-release bottom plate and side plate for quick switch between horizontal and vertical modes on a tripod. 2. Hinged arm at the battery door fits the camera curve and enhances the grip experience. 3. Arca-Swiss quick-release plate supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals. 4. Multiple mounting points: 1/4"-20 threaded hole, 3/8"-16 threaded hole, QD mount, for brilliant expandability. 5. A stretchable side plate allows cables through in vertical shooting. Compatible with Nikon Z 8 L-Shape Mount Plate x 1 Allen Wrench x 1 Product Dimensions: 153.2 x 100.2 x 63.5mm Package Dimensions: 180.0 x 129.5 x 75.0mm Product Weight: 132.0 ± 5.0g Package Weight: 212.5 ± 5.0g Material(s): Aluminum Alloy

SmallRig 4336 Cage Kit for Sony A6700 The cage secures the camera firm via one 1/4"-20 screw on the bottom and one M2.5 screw on the right side, with built-in cushions preventing scratches. Its hinge arm at the battery door better fits the camera curve and leaves room for the pinkie for more comfort. The HDMI cable clamp quickly attaches to the left side of the cage by using a thumb screw, protecting the HDMI port and ensuring stable transmission. Comes with multiple mounting points for attaching accessories including 1/4"-20 threaded holes and ARRI 3/8"-16 locating holes for SmallRig Top Handle 3765 , Side Handle 2913 one top ARRI 3/8"-16 locating hole for SmallRig Monitor Mount 2903 cold shoes for microphone, LED video light a NATO rail for SmallRig Rotating NATO Handle (Left Side) 3260 and a bottom QD socket for mounting shoulder straps. The Arca Swiss quick-release plate on the bottom supports DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals as well as DJI RS 2 / RSC 2 gimbals’ quick-release plate and SmallRig Arca-Type Quick Release Plate 3154 . The cage also reserves holes on both sides and the bottom for attaching accessories like SmallRig Hand Strap 3848 , Shoulder Strap 2428 , etc. Besides, a magnetic Allen wrench is included for easy disassembly and assembly. Compatibility: Sony Alpha 6700 Packaging including: 1x Cage 1x HDMI Cable Clamp 1x User Manual

SmallRig 4183 Cage For Sony FX30 / FX3 (New Version) The NATO rail is secured on the top via two 1/4"-20 screws and removed to allow installing the original XLR top handle. The U-shaped cage is fixed via 1/4"-20 screws on both sides and at the bottom to prevent twisting. It have a cushion to save the camera against scratches. At the battery door, there is a hinge arm that fits the camera curve for an improved grip experience for a little finger. A dedicated HDMI cable clamp protects interfaces to ensure stable signal transmission. Among its varied accessory mounts 1/4"-20 holes support SmallRig Magic Arm 2070 ARRI 3/8"-16 locating holes connect SmallRig Top Handle 2165 or Monitor Mount 2903 The top NATO rail supports SmallRig Top Handle 3322 , and the left one, Side Handle 2187 1/4"-20 locating holes at the top-left quarter and on the left side attach SmallRig Rod Clamp 3598 for follow focus Two 1/4"-20 holes on the right side allow being securely mounted onto a quick release plate for vertical shooting The cold shoe mount supports microphone & LED light and the QD port at the bottom fits QD strap. An Arca-Swiss quick-release plate at the bottom can attach DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro directly or a quick-release plate (height increase pad) for DJI RS 2 / RSC 2 gimbal and SmallRig Arca-Type Quick Release Plate 3154 . Both sides and the bottom have holes for SmallRig Hand Strap 3848 and Shoulder Strap 2428 . A magnetic spanner is also included for easy assembly and disassembly. Combability: Sony FX30 Sony FX3 Package includes: 1 x Cage 1 x NATO rail 1 x HDMI Cable Clamp 2 x 1/4”-20 Screw

SmallRig Cage Kit for Sony Alpha 7 III / Alpha 7R III 4198 is designed to facilitate a low-angle shot and protect the camera while offering a wide range of accessory mounts. It includes a cage, an HDMI cable clamp, and a top handle. The top handle feels comfortable and enables easy carrying at a low-angle shot. 1/4"-20 threaded holes, ARRI 3/8" -16 locating holes, cold shoes and NATO rails and QD socket support monitor mount 2294, microphones, LED lights, monitor mount 2903B, NATO accessories. The HDMI cable clamp, mounted onto the left side of the cage via two 1/4"-20 screws, prevents deflection and fixes cables with a thumbscrew to protect interfaces and ensure stable signal transmission. In addition, holes on both sides of the cage allow for attaching hand straps. The cage comes with a built-in magnetic flat-head screwdriver & hex spanner for easy disassembly and assembly. 1. Portable handheld kit for an easy low-angle shot. 2. Triple-point locking for enhanced stability and anti-twist. 3. HDMI cable clamp protects interfaces and ensures stable signal transmission. 4. A hinged arm at the battery door fits the camera curve and enhances the grip experience. 5. Multiple mounting points: 1/4"-20 threaded holes, ARRI 3/8" -16 locating holes, cold shoe mounts, NATO rails and QD socket support handles, microphones, LED lights, monitors, etc. Note: Please remove the split D-ring on both sides of the camera before installing the cage. Compatible With Sony Alpha 7 III Sony Alpha 7R III 1 x Cage 1 x HDMI Cable Clamp 3637 1 x ARRI Locating Handle 3765 2 x Allen Wrench 2 x 1/4''-20 Screw Product Dimensions: 150.2 x 135.0 x 175.0mm Package Dimensions: 180.0 x 129.5 x 75.0mm Product Weight: 315.0±5.0g Package Weight: 400.0±5.0g Material(s): Aluminum Alloy, Stainless Steel, Silicone

PV Combiner Box, DC 1in-1out, IP66   Features: 1 input 1 output 1000V DC.DC string box is designed for 1 string PV system.For surge protection and isolating at solar DC side.Flame retardant rating V0, UV resistance, IP66 waterproof enclosure, degree of resistance to impacts IK10.Set includes MC4 and glands. DC switch: 2P, 1000V, 25A (1pcs.).Door clutch easier operating and lockable handle.Patented DC arc extinguishing chamber.Magnetic steels inside ensure rapid and safe extinguishing.Certification: UI508i approval, IEC60947-3 Pv2. DC SPD: 3P, 1000V, 40kA. (1pcs.).Designed for solar PV protection.Higher capacity in 20KA (IEC, UL).Response time

SmallRig Standard Cage Kit for Sony Alpha 7S III 3180 locks the camera firmly via one 1/4”-20 screw on the bottom and one M2.5 screw on the side. The M2.5 screw needs to pass through the shoulder strap holes on the side of the camera. The cage 3065 features multiple standard mounting points and gives you full access to all the ports, bottoms, and the battery door of the camera. In addition to multiple 1/4"-20, 3/8"-16 threaded holes and shoulder strap holes, the cage also comes with standard NATO rails and cold shoe mounts. You can mount accessories on the cage such as SmallRig Monitor Mount 2904, microphones, SmallRig Side Handle 2187 and HSN2093, etc. In order to prevent the camera's HDMI cable from accidental disconnection, the cage is equipped with an HDMI cable clamp, which can be attached to the side of the cage via a 1/4"-20 thumbscrew, and the locking part is adjustable. The cage is made of magnesium-aluminum alloy material, which reduces 40% weight than a traditional cage. Moreover, there is a magnetic screwdriver on the bottom of the cage for your assembly. Package contains: 1 x cage 1 x HDMI cable clamp Product dimensions: 147 x 107 x 61 mm Package dimensions: 165 x 155 x 85 mm Net weight: 156 g ± 5 g Package weight: 226g±5g Material(s): Magnesium-aluminium alloy

Liene Amber M200 4x6" Portable Photo PrinterThe handy Liene Amber M200 printer lets you transfer your digital shots to paper in just 59 seconds, offering professional photo studio quality anywhere. Thanks to dye-sublimation technology and 300 DPI resolution, each print impresses with exceptional color depth and precise detail reproduction. The device supports popular file formats such as JPG and PNG, allowing you to conveniently print photos without unnecessary complications.Full mobility thanks to the built-in batteryWhat sets the M200 apart is its integrated 2300 mAh battery. It gives you complete independence from electrical outlets – a single full charge allows you to print up to 40 professional photos. It's the perfect solution for an outdoor wedding, a bonfire with friends, or a long trip where access to electricity is limited. Enjoy the freedom to create souvenirs where emotions are born.No ink, no messThe printer uses dye-sublimation technology, which does not require liquid ink. This eliminates the risk of ink drying out, smudging prints, or having to clean the print head. The cartridges are extremely easy to replace, which simplifies operation to a minimum and allows you to focus on enjoying photography.Memories resistant to time and waterIn the final stage of printing, the Liene Amber M200 applies a special protective layer. This automatic lamination makes the prints resistant to splashes, dust, and fingerprints, and the colors do not lose their intensity for decades. Your photos can safely pass from hand to hand, find their way into albums or wallets, and retain their original quality and brilliance for years to come.Compact form and thoughtful designThe white casing with a matte finish looks modern and is easy to keep clean. The design has been created with ease of use in mind – access to the interior is intuitive and the ventilation system ensures adequate air flow. Its compact dimensions and low weight mean that the printer can easily fit into a bag or backpack.Mobile design created for travelThanks to the magnetic paper tray, which can be conveniently attached to the top of the housing during transport, the device becomes extremely compact. Despite its built-in battery, the printer weighs only about 1.4 kg, which, combined with its small size (205×124.6×85.4 mm), makes it easy to fit in a backpack or carry-on luggage.Instant wireless connectivity in all conditionsThe printer has a built-in Wi-Fi hotspot that allows you to connect directly to your smartphone without the need for a router. This allows you to print photos anywhere—in the garden, on vacation, or during a family picnic—and share them with your loved ones right away.Invite your loved ones to print togetherThe printer works with iOS, Android, PC, and Mac computers. The universal USB-C port allows for a stable wired connection, and the ability to support up to five users simultaneously means that everyone at the party can send their favorite shot to print. Creating a shared gallery of memories has never been so easy and inclusive.Creativity at the touch of a buttonThe dedicated Liene Photo app opens the door to photo personalization. You can apply stylish filters, add frames, or use effects that will give your photos a unique character. What's more, ID Photo mode allows you to instantly prepare photos for documents (ID, visa) at home or in the field, combining fun with exceptional functionality.Performance tailored to your needsThe M200 comes with everything you need to get started. The large paper tray holds 20 sheets of photo paper at a time, ensuring smooth operation without frequent refilling. Stable operation in a wide temperature range (10–35°C) ensures that the printer will not let you down, whether at home or during summer outdoor events.Included in the set photo printer ink cartridge (1 piece) 4x6'' photo paper (20 sheets) power adapter user manual Manufacturer Liene Model DHP512 Printing technology D2T2 thermal sublimation (CMY + protective l