Maximus LED

X-Sense XC04-WX Carbon Monoxide DetectorThe X-Sense XC04-WX carbon monoxide sensor is your reliable watchdog to keep your home safe around the clock. Equipped with a sensitive electrochemical sensor, it instantly alerts you when elevated levels of carbon monoxide are detected. The ability to connect to the X-Sense Home Security app via Wi-Fi (2.4 GHz) allows you to monitor CO levels in real time, and with the option to share the alarm with loved ones, everyone in the family can have access to home security information no matter where they are.Effective carbon monoxide detectionThe X-Sense XC04-WX monitors CO levels from 30 to 999 ppm and reacts accordingly depending on its concentration. At a concentration of 30 ppm, the alarm will sound after 120 minutes, while at a level of 300 ppm the response time is just 3 minutes. The high sensitivity provides quick warning of danger, and the loud alarm (≥ 85 dB) ensures that the signal will be heard even in large spaces.Intuitive operation and versatile mounting optionsThe sensor can be mounted on a wall or placed on a flat surface, giving it the flexibility to fit into any interior. A bright LCD display along with LEDs (green, yellow and red) informs you of the device's status, allowing you to easily control CO levels, battery status and alarm mode.Up to 10 years of operationWith long-term protection in mind, the XC04-WX sensor features a sensor with a life span of up to 10 years. Powered by a replaceable CR123A battery that lasts up to a year, it provides minimal maintenance. Whether you're at home or away for an extended period of time, you can count on reliable alarm performance for years to come.Full control over securityNo matter where you are, you have full visibility of the situation in your home! With push notifications, the X-Sense XC04-WX will immediately send an alert when carbon monoxide levels exceed safe standards - even before the audible alarm sounds. In addition, the sensor records the highest CO concentration detected, allowing you to analyze potential hazards upon your return.Included: CO sensor (with battery installed) Screws x2 Expansion bolts x2 User manual Manufacturer X-Sense Model XC04-WX Sensor type Electrochemical Safety standard EN 50291-1:2018 Sensor lifetime 10 years Power supply CR123A battery (replaceable) Battery life 1 year Alarm volume ≥ 85 dB at 3 m at a frequency of 3.2 ± 0.3 kHz Operating temperature range From 4 to 38°C Operating humidity 10%-85% (non-condensing) Wi-Fi connectivity 2.4 GHz (IEEE 802.11b/g/n, incompatible with 5 GHz networks) Application features Push notifications (CO alarm, low battery, fault, CO alarm prevention), sharing the device with family members Display LCD with memory for maximum CO level. Response times for CO levels. 30 ppm - more than 120 minutes; 50 ppm - 60-90 minutes; 100 ppm - 10-40 minutes; 300 ppm - 0-3 minutes Dimensions 135 x 63 x 24 mm Weight 88 g

Zalman S3 ATX mid tower case, luxurious hairline front panel design with dual intake with metal finish. Full acrylic side panel. Design Form factor: Midi Tower Type: PC Supported motherboard form factors: ATX, micro ATX, Mini-ITX Number of 3.5" bays: 2 Material: Acrylic, Plastic, Steel Colour of product: Black Side window: Y Number of expansion slots: 7 Number of 2.5" bays: 2 Reset button: Y On/off button: Y Anti-dust filter: Y LED indicators: HDD, Power Maximum CPU cooler height: 15.6 cm Maximum graphics card length: 33 cm Maximum PSU length: 18 cm Power supply Power supply included: N Ports & interfaces USB 3.0 (3.1 Gen 1) Type-A ports quantity: 1 Audio input: Y USB 2.0 ports quantity: 2 Audio output: Y Cooling Front fans diameters supported: 120 mm Rear fans installed: 1x 120 mm Maximum rear fans: 1 Maximum front fans: 3 Rear fans diameters supported: 120 mm Maximum top fans: 2 Top fans diameters supported: 120 mm Rear radiator fan sizes supported: 120 mm Front radiator fan sizes supported: 120 mm Number of bottom fans supported (max): 2 Bottom fans diameters supported: 120 mm Storage Supported hard disk drive sizes: 2.5,3.5" Weight & dimensions Width: 189 mm Depth: 412 mm Height: 451 mm Weight: 3.7 kg Other features PCI Express power connectors (6-pin): 7

Darkflash Gauss G24 3-in-1 computer fans (white)The Darkflash Gauss G24 fan is an excellent choice for those who want to keep their computer efficiently cooled, while appreciating a stylish design. It provides impressive airflow (52.96 CFM) while reducing noise, so it maintains optimal temperature without generating loud, annoying noise. It is also distinguished by addressable ARGB backlighting for fantastic visual effects. The kit includes 3 fans, which can be connected using built-in magnets.High performanceThe Gauss G24 fan allows precise speed adjustment from 800 to 2000 RPM. As a result, it can provide cooling that is optimally matched to system load and temperature changes. Play dynamic games or use demanding software without worry - with Darkflash you don't have to worry about your computer overheating!Quiet operationThanks to the special design of nine aerodynamic blades, the fan ensures quiet operation even at high speeds. Its maximum noise level is only 33.55 dB - forget about annoying loud noise and enjoy quiet work or gaming!It will serve you for a long timeThe fan is equipped with a durable hydraulic bearing, which increases its durability, ensures low friction and reduces noise levels. Thanks to this, the service life of the device reaches up to 40,000 hours - an excellent choice for years!Easy connection thanks to built-in magnetsThe included fans are equipped with practical magnets, so you can connect them conveniently. This will allow you to better organize the space inside the case and keep the wiring in order. Such a solution improves the aesthetics and improves the airflow in the computer! Note: due to the power limitations of the ARGB interface, it is recommended to combine a maximum of four fans.ARGB backlightingThe fan supports addressable ARGB backlighting, allowing you to fully personalize the look of your computer. Combine it with a transparent case, for example, and create a configuration that will impress you not only with its performance, but also with its unique design! The Gauss G24 is compatible with a number of RGB systems, such as ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion 2.0 and ASRock Polychrome RGB. Manufacturer Darkflash Model Gauss G24 3IN1 Color White Dimensions 120 x 120 x 25 mm Speed Approx. 800-2000 rpm Noise level 33.55 dBA (max.) Airflow 52.96 CFM (max.) Static pressure 1.96 mm H2O (max.) Current 0.16 A (LED 5 V) Bearing type Hydraulic MTTF 40 000 h

PWM Fan P14 Pro Reverse A-RGB, 4-pin, 140mm, white with A-RGB, 3-Pack.  Features:  Reversed Airflow . The P14 Pro Reverse is specifically designed for air intake from the back side. It's particularly suitable when conventional fans would compromise the aesthetics. Efficient Performance at High Air Resistance . Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters. PST - PWM-Based Synchronized Fan Control . An additional PWM connector allows multiple fans to be synchronized in series using a single header. Maximum Performance . Revised fan blade design for an optimal balance of performance and smooth operation Optimized Bearing-Shaft Design (FDB) . A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations. SOTA Microcontroller . Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity. More Power - Less Noise . An automated measuring and balancing process ensures smooth performance by applying the balancing compound with pinpoint accuracy. Minimum Gap Dimensions for Maximum Efficiency . Enables higher static pressure and maximum airflow efficiency.  Specifications: Fan speed: 400-2650 RPM PWM controlled, 0 rpm below 5 % PWM.Air flow: 98 CFM / 166.5 m³/h.Static pressure: 5.1 (mm / H2O).Fan bearing: Fluid Dynamic Bearing.Current / voltage: 0.4A / 12V DC.Connection: 4-Pin Fan Plug + 4-Pin Socket.Cable length: 400 mm + 80 mm Daisy-Chain Cable.LED: 12x A-RGB Gen2.RGB voltage/ current: 5V DC/ 0.40A.LED connector: 3-Pin A-RGB Plug + 3-Pin Socket.Size: 140x140x30 mm.Color: white body, optional lighting.Weight: 253 g (x3).Set includes 3 pcs.  Warranty: 6 years.

Performance Suitable for: Computer case Type: Fan Rotational speed (min): 800 RPM Fan diameter: 14 cm Rotational speed (max): 1500 RPM Noise level (high speed): 29 dB Maximum airflow: 61 cfm Quantity per pack: 3 pc(s) Bearing type: Fluid Dynamic Bearing (FDB) Mean time between failures (MTBF): 100000 h Design Colour of product: Black Number of fans: 1 fan(s) Illumination LED: Y Number of fan blades: 9 Illumination colour: Red/Green/Blue Fan connector: 3-pin + 4-pin Certification: CE Power Rated current: 0.3 A Voltage: 5-12 V Weight & dimensions Width: 140 mm Depth: 140 mm Weight: 130 g Fan dimensions (W x D x H): 140 x 140 x 26 mm Cable length: 0.7 m Height: 26 mm Technical details Sustainability certificates: RoHS

Shelly Plug M Gen3 Matter 13A Smart Plug, BlackShelly Plug M Gen3 is a modern smart plug that combines functionality with security and ease of use. With support for the Matter standard and dual Wi-Fi and Bluetooth connectivity, the device works perfectly with various smart home ecosystems. It allows you to remotely control connected devices, monitor energy consumption in real time, and automate everyday tasks—all without the need for an additional hub. Built-in overheating protection and support for devices up to 3000 W make Shelly Plug M Gen3 a safe and reliable choice for any home.Remote control and automation of daily activitiesWith the Shelly Smart Control app, you can control your connected devices no matter where you are. The schedule and timer feature allows you to automatically turn devices on and off, which is useful for forgotten chargers or heaters, for example. Schedules are stored locally, so they work even without an internet connection. For advanced users, there is also a feature for creating custom scripts to automate the operation of the outlet when Matter is turned off.Intuitive operation and clear signalingThe integrated, multi-color LED button allows you to quickly assess the operating status of the device – on, off, or in a specific mode. This means that a single glance is enough to make sure that everything is working as planned. Shelly Plug M Gen3 can also act as a Wi-Fi signal booster, improving the range and stability of the connection within other devices in the Shelly ecosystem.Expanded capabilities with Bluetooth BLE GatewayThe built-in Bluetooth gateway function allows integration with nearby BLE sensors, enabling you to expand your smart home with additional elements such as temperature or motion sensors. This solution increases configuration flexibility and allows you to better tailor your home's operation to your individual needs.Included Shelly Plug M Gen3 13A smart plug Documentation Manufacturer Shelly Model PlugPMGen3B Connectivity Wi-Fi 802.11 b/g/n (2.4 GHz), Bluetooth Supported standards Matter Bluetooth gateway function (BLE Gateway) Yes – supports connection of BLE sensors Remote control Via the Shelly Smart Control app Maximum load up to 13 A (3000 W) Compatibility with smart home systems Shelly Smart Control, Matter-compatible platforms

Shelly Plug M Gen3 Matter 13A Smart Plug, WhiteShelly Plug M Gen3 is a modern smart plug that combines functionality with security and ease of use. With support for the Matter standard and dual Wi-Fi and Bluetooth connectivity, the device works perfectly with various smart home ecosystems. It allows you to remotely control connected devices, monitor energy consumption in real time, and automate everyday tasks—all without the need for an additional hub. Built-in overheating protection and support for devices up to 3000 W make Shelly Plug M Gen3 a safe and reliable choice for any home.Remote control and automation of daily activitiesWith the Shelly Smart Control app, you can control your connected devices no matter where you are. The schedule and timer feature allows you to automatically turn devices on and off, which is useful for forgotten chargers or heaters, for example. Schedules are stored locally, so they work even without an internet connection. For advanced users, there is also a feature for creating custom scripts to automate the operation of the outlet when Matter is turned off.Intuitive operation and clear signalingThe integrated, multi-color LED button allows you to quickly assess the operating status of the device – on, off, or in a specific mode. This means that a single glance is enough to make sure that everything is working as planned. Shelly Plug M Gen3 can also act as a Wi-Fi signal booster, improving the range and stability of the connection within other devices in the Shelly ecosystem.Expand your capabilities with Bluetooth BLE GatewayThe built-in Bluetooth gateway function allows integration with nearby BLE sensors, enabling you to expand your smart home with additional elements such as temperature or motion sensors. This solution increases configuration flexibility and allows you to better tailor your home's operation to your individual needs.Included Shelly Plug M Gen3 13A smart socket Documentation Manufacturer Shelly Model PlugPMGen3W Connectivity Wi-Fi 802.11 b/g/n (2.4 GHz), Bluetooth Supported standards Matter Bluetooth gateway function (BLE Gateway) Yes – supports connection of BLE sensors Remote control Via the Shelly Smart Control app Maximum load up to 13 A (3000 W) Compatibility with smart home systems Shelly Smart Control, Matter-compatible platforms

Performance characteristics Suitable for: Processor Type: Cooler Fan diameter: 12 cm Supported CPU sockets: LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 1200 (Socket H5), LGA 1366 (Socket B), LGA 2011 (Socket R), LGA 2011-v3 (Socket R), LGA 2066, Socket AM3, Socket AM3+, Socket AM4, Socket FM2, Socket FM2+ Rotation speed (min): 800 RPM Rotation speed (max): 1200 RPM Noise level (high speed): 27 dB Maximum air flow: 61.52 cfm Pulse Width Modulation (PWM) support: Yes Amount in the package: 1 pc Fan Bracket Type: Hydraulic Construction Radiator material: Aluminum Number of fans: 1 fan(s) Material: Aluminum, Copper, Plastic Product color: White Lighting LED: Yes Number of heat pipes: 4 Base plate material: Copper Lighting color: Red/Green/Blue Energy management Nominal voltage: 12 V Thermal Power Output Size (TDP): 180 W Weight and dimensions Width: 132 mm Length: 85 mm Height: 158 mm Weight: 740 g

Apraksts: Ražotājs: MULTIFUNCTION PIPER 3IN1 530LM, RANGE 500M, IP54 Product description Daudzfunkcionālais Yato prožektors, pateicoties tā konstrukcijai un pat 11 darbības režīmiem, būs ideāli piemērots kempingiem, ceļojumiem, mājas darbiem vai kā automašīnas brīdinājuma lampa. CREE XPG LED galvenais lukturis nodrošina 500m diapazonu un 530 lūmenu apgaismojumu. Aprīkots ar jaudīgu 3.7V 4400mAh litija jonu akumulatoru, tas nodrošinās no 3 līdz 150 stundām darbības un ļauj uzlādēt citas ierīces - powerbank funkcija. SOURCE OF LIGHT: Headlight: CREE XPG LED Lumens: 530lm Maximum range: 500m 11 darbības režīmi (3 lukturīši, 5 kempinga lampas, 3 sarkanās lampas) Flashlight - augstais režīms: 530lm Flashlight - zemais režīms: 170lm Flashlight - mirgojošs (zibsnis) Camping lamp - augstais režīms, visa lampa: 140lm Camping lamp - zemais režīms, visa lampa: 45lm Camping lamp - augstais režīms, puse lampas: 80lm Camping lamp - zemais režīms, puse lampas: 28lm Camping lamp - mirgojoša (zibsnis) Red lamp - pastāvīga gaisma Red lamp - mirgojoša (zibsnis) Red lamp - rotējošs apgaismojums SOURCE OF ENERGY: Battery: LI-ION 3.7V 4400mAh (2 x 18650) Working time: 3h - 150h Charging time: 5h Charging: USB kabelis POWERBANK funkcija - iespēja uzlādēt daudzas ikdienas ierīces CONSTRUCTION AND FEATURES: Materiāls: ABS + TPR IP54 - ūdensizturīgs 2 roktura pozīcijas pēc izvēles - iespēja turēt prožektoru no apakšas vai no priekšpuses (pistoles tipa prožektors) Āķis (stīpa) ļauj piekārt lampu Plecu siksna ļauj brīvi apgaismot zonu, neizmantojot rokas Akumulatora uzlādes indikators (4 līmeņi) Iespēja paslēpt USB kabeli rokturī Ideāli piemērots pārgājieniem, kempingiem, patrulēšanai, darbam, mājas darbiem, automašīnas bākugunīm utt. Size: 102 x 155 x 175mm Svars: 489g ABS - tam raksturīga ļoti augsta cietība, kas padara to ļoti izturīgu pret skrāpējumiem, triecieniem un iespiedumiem. Turklāt tas ir izturīgs pret dažādiem ķīmiskiem faktoriem. TPR - raksturo nodilumizturība, lieliska pretslīdes īpašība un triecienu absorbcija. Tas ir mīksts un ērts IP54 - aizsardzība pret piekļuvi bīstamām daļām ar vadu un aizsardzība pret putekļiem, kā arī aizsardzība pret ūdens šļakatām no jebkura virziena

Superfire L22 FlashlightThe Superfire LT01 2-in-1 Camping Flashlight combines a powerful 5000 lumens floodlight with a comfortable and ergonomic design. With a wide angle of illumination and multiple lighting modes, it is perfect for camping, climbing, maintenance work or everyday use. The compact size and robust design ensure reliability in all conditions.Powerful brightness and wide rangeEquipped with three high-performance SH-S09 LEDs, the lamp generates a maximum light output of 5,000 lumens. The high power and wide illumination range guarantee excellent visibility at distances of up to 300 meters. With the help of lighting modes (Low, Medium, Strong, Strobe, SOS and Turbo), you can easily adjust the light intensity to the situation.Compact and ergonomic designWith a length of 133 mm and a weight of just 190 g, the LT01 light fits perfectly in your hand. Made of durable aluminum alloy, it is resistant to mechanical damage. Its non-slip housing provides a secure grip, and a centrally located button makes it easy to quickly control the light modes even with one hand.Intelligent temperature controlThe lamp is equipped with an intelligent temperature control system that prevents overheating. When the temperature rises, the device automatically reduces the brightness, protecting the user from burns and extending the life of the LEDs.Efficient power supply and fast chargingThe lamp is powered by a 26650 or 18650 rechargeable battery, providing about 6 hours of continuous operation. Thanks to the USB-C port, charging takes only 4.5 hours. Additional features, such as a charge level indicator and the ability to replace the battery, make the lamp extremely practical and convenient to use.Weather resistanceThe LT01 lamp has an IP44 waterproof rating, making it resistant to rain and moisture. Whatever the weather, you can rely on its bright light and durable construction, making it an ideal choice for any outdoor activity.Included Headband x1 USB-C charging cable x1 AB11 x1 L22 x1 Manufacturer Superfire Model L22 Power 60W Brightness 5000LM Battery 26650/18650 Operating time 6h Charging time 4,5h Weight 190g Material Aluminum alloy Water resistance IP44 Distance 300m Dimensions 133*43*36mm Light modes Low light - Medium light - Strong light - Stoboscope - SOS/Turbo.

The Falcon Eyes Battery Holder SP-DBSY-2 for V-Mount Battery is suitable for all V-Mount batteries with a Sony mount. The holder contains a cable to connect LED lamps through a 2-pin plug and also contains an input for a V-Mount battery charger so that the battery can be charged on the holder. The included tube clamp enables the battery holder to be mounted on every light stand with a maximum diameter of 35mm. Among others suitable for the FD-BP160L.

Apraksts: Ražotājs: Produkta apraksts Liels, stabils un īpaši jaudīgs (600W) blenderis ar stikla kausu tiks galā gan ar cietākām sastāvdaļām, gan ledus smalcināšanu. Biezas sienas kauss ar izvirzījumiem uz sānu sienām atvieglo sastāvdaļu sajaukšanas procesu un tādējādi blendēšanas kvalitāti. Papildu priekšrocība ir 6 staru asmens un maksimālais apgriezienu skaits minūtē (līdz 22 000 apgr./min) INFORMĀCIJA: jauda: 600W maksimālā jauda (maximum): 800W spriegums: 220-240V 50Hz ātruma regulēšana - 5 pārnesumi un pulsa funkcija korpuss: ABS kauss: stikls ar biezumu līdz 0.6 cm kabeļa garums: 80cm līdz 22 000 apgr./min ledus smalcināšanas iespēja neslīdošas kājiņas viegla kausa fiksācijas sistēma drošības fiksators vākā novērš nejaušu blendera iedarbināšanu Blendera izmēri ar kausu: 16 x 18 x 40.5 cm (garums x platums x augstums) PIEDERUMI: sešstaru asmens, kas izgatavots no ļoti labas kvalitātes nerūsējošā tērauda (SUS301). Divas augšējās daļas ar zobiem cietāku sastāvdaļu griešanai. Iespējams noskrūvēt asmeni un mazgāt kauss izgatavots no bieza stikla ar vāku - 1.5l. Vāks ar 50mm diametra atveri. 0.6cm biezs stikls vāks PRIEKŠROCĪBAS Kauss - izstrādāts vēl labākai blendēšanai, sastāvdaļu sajaukšanai un izturības palielināšanai. Biezs stikla kauss ar izvirzījumiem uz sānu sienām atvieglo sajaukšanas procesu un tādējādi uzlabo blendēšanas kvalitāti. Darba kvalitāte - garantēta, pateicoties lielas jaudas 600W motoram Ātruma regulēšana - līdz 5 pārnesumiem un pulsa funkcija atvieglos ātruma pielāgošanu blendējamām sastāvdaļām parametri Frekvence : 50 Spriegums : 220-240V Jauda : 600W Papildu dokumentācija:

The DIGITUS HDMI Splitter distributes/duplicates audio and video signals from an HDMI device to two TVs, monitors, or projectors in UHD 4K/60 Hz quality. Using the EDID management function, you can choose from three modes (Copy, Auto, Downscaler). The integrated downscaling function supports 4K display on Full HD displays. Both 4K and Full HD displays can also be operated simultaneously. Thanks to the Auto-EDID function, the splitter automatically detects connected displays, eliminating the need for manual adjustments. The video splitter is powered via a micro USB cable, e.g., from the source device or a USB power adapter. Splits HDMI signal to 2 TVs/monitors/projectors EDID management: Auto/Copy/Downscaler Power via micro USB cable (included) Maximum resolution: 4K/60 Hz (4:4:4) Maximum HDTV resolution: 3840 x 2160 pixels, 60 Hz Connectors: 1 x HDMI input (4K/60 Hz) 2 x HDMI output (4K/60 Hz) 1 x micro USB input (DC 5 V) power 6 x LED status indicators 1 x EDID switch

PWM Fans P12 Pro Reverse A-RGB, 4-pin, 120mm, white with A-RGB, 3-Pack.  Features:  Reversed Airflow . The P12 Pro Reverse is specifically designed for air intake from the back side. It's particularly suitable when conventional fans would compromise the aesthetics. Efficient Performance at High Air Resistance . Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters. PST - PWM-Based Synchronized Fan Control . An additional PWM connector allows multiple fans to be synchronized in series using a single header. Optimized Bearing-Shaft Design (FDB) . A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations. SOTA Microcontroller . Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity. More Power - Less Noise . An automated measuring and balancing process ensures smooth performance by applying the balancing compound with pinpoint accuracy. Optimized Airflow Design . The trumpet-shaped intake and teardrop-shaped spokes direct the airflow with reduced flow losses. This reduces air resistance, minimising turbulence and aerodynamic noise. Minimum Gap Dimensions for Maximum Efficiency . Enables higher static pressure and maximum airflow efficiency.  Specifications: Fan speed: 500-3000 RPM PWM controlled, 0 rpm below 5 % PWM.Air flow: 73 CFM / 124 m³/h.Static pressure: 4.5 (mm / H2O).Fan bearing: Fluid Dynamic Bearing.Current / voltage: 0.4A/ 12V DC.Connection: 4-Pin Fan Plug + 4-Pin Socket.Cable length: 400 mm + 80 mm Daisy-Chain Cable.LED: 12x A-RGB Gen2.RGB voltage/ current: 5V DC/ 0.40A.LED connector: 3-Pin A-RGB Plug + 3-Pin Socket.Size: 120x120x25 mm.Weight: 172 g (x3).Color: white body, optional lighting.Set includes 3 pcs.  Warranty: 6 years.

LEPRO 640005-DW-2 Solar Lamp, 2-PackThe LEPRO 640005-DW-2 solar lamp is a set of two outdoor LED lamps equipped with 74 LEDs, a PIR motion sensor, a twilight sensor, a remote control, and a solar panel. Each light produces a luminous flux of 1,000 lumens and emits cool light with a color temperature of 6,500 K, making it ideal for illuminating driveways, garages, patios, walkways, and gardens. The 2-in-1 design allows you to mount the solar panel together with the light or separate it using a 3-meter cable, making it easy to adapt the installation to the available space.Effective Lighting and Wide CoverageThe light is equipped with three adjustable heads that provide coverage of an area up to 270 degrees wide. The built-in motion sensor detects activity at a distance of up to 8 meters and covers a 120-degree field of view. As a result, the device effectively illuminates the selected area, making it easier to move around after dark.Three operating modes tailored to different needsThe LEPRO 640005-DW-2 model offers three operating modes that can be switched using a remote control with a range of 5 to 8 meters. Mode 1 automatically activates full brightness of 1,000 lumens after dark, while Mode 2 activates a soft light of 20 lumens and switches the lamp to full brightness upon detecting motion. Mode 3 provides continuous lighting at 200 lumens for 4 hours, after which the device automatically switches to Mode 1.Two Mounting Options and Efficient Power SupplyThe integrated design allows the lamp and solar panel to be mounted as a single unit, which speeds up installation and reduces the number of wires. In the second configuration, the panel can be placed in the spot with the best sunlight, while the lamp itself can be mounted exactly where an additional light source is needed. The 18650 battery with a capacity of 1,800 mAh takes approximately 8 hours to charge, and a full charge provides up to 60 minutes of cumulative light output, which translates to over 200 motion-activated cycles.Weather ResistanceThe housing, which meets the IP65 rating, effectively protects the light from dust, moisture, rain, and temperature fluctuations. As a result, the device can operate year-round without the need for additional protective measures. This is a practical solution for those who want to use efficient lighting without having to install a traditional electrical system.Included in the set LEPRO solar lamp with three LED heads x 2 Solar panel with 3-meter cables x 2 Remote control x 2 Mounting hardware User manual in Polish Manufacturer’s packaging Manufacturer LEPRO Model 640005-DW-2 Number of LEDs 74 Luminous flux 1000 lm Color temperature 6500 K Color rendering index CRI > 70 Power 10 W PIR motion sensor Yes Motion detection range 0–8 m Motion detection angle 120° Maximum illumination angle 270° Protection rating IP65 Battery capacity 1,800 mAh Charging time approximately 8 hours Average lifespan 25,000 hours Material plastic Color white Dimensions 14.4 × 12.3 × 11.4 cm Weight 540 g

Shelly Dimmer 0/1-10V PM Gen4The Shelly Dimmer 0/1–10V PM Gen4 is a smart dimmer designed for devices that use the 0–10 V and 1–10 V standards, such as LED lighting, motors, and valves. It enables smooth brightness control, energy consumption monitoring, and remote control via an app, a smart home system, or traditional wall switches. With support for Wi-Fi, Zigbee, Bluetooth, and Matter, it easily integrates with modern automation ecosystems, and installation behind an existing switch allows you to modernize your system without altering the room’s appearance. This versatile solution is ideal for homes, offices, hotels, and commercial spaces, providing convenience, energy savings, and full control over lighting.Smart control without replacing the wiringThe Shelly Dimmer 0/1–10V PM Gen4 is designed to modernize existing lighting systems. The module is mounted behind your existing wall switch, allowing you to keep your current hardware while gaining smart control features. It supports both single-button and dual-button control, allowing you to conveniently brighten and dim the lights without changing how you use the system.Full control over lighting and ambianceThe device is compatible with devices equipped with 0–10 V and 1–10 V control inputs, making it suitable not only for LED lighting but also for motor and valve control systems. You can precisely set the minimum and maximum brightness levels, adjust the speed of transitions between lighting levels, and decide how bright the light should be when turned on. Night Mode automatically reduces brightness during selected hours, providing soft lighting in the bedroom, children’s room, or hallway without causing glare.Smart automation tailored to your daily rhythmThe 0/1–10V PM Gen4 dimmer lets you create complex automation scenarios that eliminate the need for manual lighting control. You can schedule weekly and annual routines, synchronize lighting with sunrise and sunset, use automatic on/off timers, and create your own scripts tailored to your individual needs. The device also supports Webhooks, MQTT, HTTP, HTTPS, UDP, and KNXnet/IP communication, allowing it to seamlessly integrate with advanced building automation systems.Multi-protocol communication and broad compatibilityThe modern Shelly ESP32-C6 chip ensures high performance and stable operation. The module simultaneously supports Wi-Fi, Zigbee, Bluetooth, and Matter, allowing it to be integrated with the most popular smart home platforms, such as Google Home, Amazon Alexa, Samsung SmartThings, and Home Assistant. The built-in Wi-Fi and Zigbee signal booster helps extend network range, and the Bluetooth Low Energy (BLE) gateway feature enables communication between Bluetooth and Wi-Fi devices, facilitating the expansion of the entire smart home ecosystem.Energy Consumption Monitoring and Greater EfficiencyThe built-in measurement module continuously monitors the voltage, current, and power consumption of connected devices. This allows you to track energy consumption in real time, identify inefficient systems, and more easily optimize operating costs. Automatically dimming lights during the day or adjusting their brightness to suit ambient conditions helps reduce energy consumption.Safe Operation and Wide Range of ApplicationsThe Shelly Dimmer 0/1–10V PM Gen4 is equipped with protections against overheating, overload, overvoltage, and excessive current draw, which enhances the safety of the entire system. The device is suitable for use in homes and apartments, as well as in hotels, restaurants, cafes, offices, conference rooms, and cultural venues.Included in the set: Dimmer Matter QR code User manual General Manufacturer Shelly Model Dimmer 0/1-10V PM G4 Physical Specifications Dimensions (H × W × D) 38.5 × 43.5 × 17 mm Weight 28.5 g Maximum tightening torque for screw terminals 0.4 Nm Wire cross-section 0.2–2.5 mm² (single-strand, multi-strand, and ferrule-terminated wires) Stripped wire length 5–6 mm Installation In a j

3 SwitchBot smart LED stripLight controlled intelligentlyThe SwitchBot LED Strip Light 3 works with Matter technology so you can control your lights on Apple Home, Alexa, Google Home, Samsung SmartThings and Home Assistant. Turn on, dim and change colors by voice, through the app or in automatic scenes - just the way you're comfortable.Millions of colors and full personalizationThe strip uses 3-in-1 RGB + cool and warm white (CW+WW) LEDs, offering more than 16 million colors and infinitely adjustable light temperature from 2700 to 6500 K. It allows you to create the perfect mood - from bright light for work to a cozy, warm glow for relaxation.Smooth dimming and ready-made scenesSwitchBot LED Strip Light 3 allows you to adjust the brightness from 1-100%. In the app, you'll find predefined modes such as movie, night or relaxation, and you can also create your own - to match the rhythm of your day and your mood.Voice, motion and music controlYou can operate the tape by voice, remote control or smartphone. A built-in microphone allows you to synchronize the light to the rhythm of music, and when connected to a motion sensor, the LEDs light up automatically, such as when you enter a room at night.Brightness and safetyWith an output of 18 watts and a maximum brightness of 1,200 lumens, the tape is perfect for the living room, kitchen, bedroom or study. The IP44 rating ensures resistance to dust and moisture, and the 25,000-hour lifespan guarantees long-lasting use.Easy installation and durable constructionThe LED tape is flexible, bend-resistant and easy to fit - just peel off the protective layer and stick it to the desired location. The 5-meter length, cutting capability and strong 3M tape allow for quick installation without tools.Included LED SwitchBot LED Strip Light 3 (5m) Power supply with cord Wired controller Remote control (24 keys) 3M mounting tape User manual Manufacturer SwitchBot Model LED Strip Light 3 Power supply 100-240 V, 50-60 Hz Power consumption 18 W Light color RGB + CW + WW (adjustable cold and warm white) Color temperature 2700-6500 K (continuously adjustable) Luminous flux 1200 lm Brightness adjustment 1-100% Number of diodes 72 LED/m (24 × RGB, 24 × 2700-3000 K, 24 × 6500 K) Strip length 5 m Tape thickness 1.2 mm Lifetime 25 000 h Degree of protection IP44 Communication Wi-Fi 2.4 GHz, Matter Compatibility Apple Home, Alexa, Google Home, SmartThings, IFTTT, Home Assistant Control SwitchBot app, IR remote control, wired controller, voice commands Colors More than 16 million (RGB + warm and cold white)

CPU air cooler Volcano 0C T102 LCD ARGB 120 blackCPU UNDER CONTROLWith a quick glance, you can keep your CPU temperature and fan speed under control. No additional software overlays just convenient and stylish monitoring. The built-in LED display shows exactly what you need, combining elegant design with precise information about your processors performance.VISUAL MASTERYThe ARGB LED strip and fan transform the interior of your case into a visual spectacle. It looks especially impressive in aquarium-style cases or those with a tempered glass side panel. Designed in elegant black, it provides a stylish and universal accent that enhances the character of any computer.ZERO ZONE COOLING FINSPrecisely designed aluminum cooling fins ensure optimal airflow. This increases the safety and lifespan of the processor, because the lower the temperatures, the lower the risk of overheating and the slower the wear.TITANIC WORK OF HEAT PIPESFour heat pipes perform a titanic job to cool the processor as efficiently as possible. Thanks to them, heat is effectively transferred away from the CPU so it can operate at peak efficiency.ADJUST THE FAN TO YOUR NEEDSThe 120 mm ARGB PWM fan operates within a speed range of 600 (+-100) to 2000 (+-10%) RPM. The speed can be configured using the fan curve, giving you full control over the cooling performance.PLAY WHILE OTHERS SLEEPThe fan delivers excellent performance. With 75 CFM airflow, it ensures efficient cooling even for heavily loaded processors while generating noise at only 28 dBA. Its a perfect solution for late-night gaming.ESSENTIAL PRECISIONThe smoothly and carefully polished base of the cooling block makes optimal contact with the thermal paste on the processor. This ensures maximum efficiency of the entire cooling system.THERMAL PASTE INCLUDEDThe set includes thermal paste with optimal consistency for precise application. Everything you need is included open the box, apply the paste, and install the cooler. Its that simple!WELL-THOUGHT-OUT DESIGNThe MODECOM Volcano 0C air coolers are designed to fit most ATX motherboard models. With a height of only 153 mm, the cooler can be installed in the majority of cases available on the market.

Connect USB 3.0 devices, such as printers or scanners, to your PC or notebook even over longer distances. Enjoy stable connections and avoid performance losses even over longer distances thanks to the built-in signal amplifier. A built-in LED function indicator shows the status of the signal amplifier. The built-in electronics ensure smooth data transmission without loss at all times. The DIGITUS USB 3.0 Active Extension Cable series offers solutions with lengths from 10 to 20m. Increases the maximum USB cable length by 10 m Stable signal transmission due to active signal amplifier No performance loss despite the cable length Data transfer rates up to 5 Gb/s (USB 3.0, Super Speed) LED function display Plug & Play connect and use

PWM Fans P12 Pro A-RGB, 4-pin, 120mm, black with A-RGB, 3-Pack.  Features:  Efficient Performance at High Air Resistance . Thanks to high static pressure, the Pro fans move air effectively through tight spaces. This makes them ideal for radiators, perforated panels, and mesh filters. PST - PWM-Based Synchronized Fan Control . An additional PWM connector allows multiple fans to be synchronized in series using a single header. Maximum Performance . Revised fan blade design for an optimal balance of performance and smooth operation Optimized Bearing-Shaft Design (FDB) . A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations. Automated Balancing . An automated measuring and balancing process ensures exceptional precision and smooth performance by applying the balancing compound with pinpoint accuracy. SOTA Microcontroller . Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity. More Power - Less Noise . The fan delivers more performance at low speeds with higher airflow and static pressure at just 25 dB(A) - ideal for quiet, powerful cooling. Minimum Gap Dimensions for Maximum Efficiency . Enables higher static pressure and maximum airflow efficiency.  Specifications:  Fan speed: 600-3000 RPM PWM controlled, 0 rpm below 5 % PWM. Air flow: 77 CFM / 131 m³/h. Static pressure: 6.9 (mm / H2O). Fan bearing: Fluid Dynamic Bearing. Current / voltage: 0.29A / 12V DC. Connection: 4-Pin Fan Plug + 4-Pin Socket. Cable length: 400 mm + 80 mm Daisy-Chain Cable. LED: 12x A-RGB Gen2. RGB voltage/ current: 5V DC/ 0.40A. LED connector: 3-Pin A-RGB Plug + 3-Pin Socket. Size: 120x120x25 mm. Weight: 185 g (x3). Color: black body, optional lighting. Set includes 3 pcs.  Warranty: 6 years.