Maximus LED

# Mitas Maxima ## Augstas līmeņa sniega un ziemas riepas, kas nodrošina izcilu saķeri un drošību Mitas Maxima ir izstrādāta, lai nodrošinātu maksimālu veiktspēju ziemas apstākļos, tostarp uz sniega, ledu un mitrām virsmām. Tās attīstītā protektora struktūra efektīvi novada ūdeni un sniegu, samazinot slīdēšanas risku un palielinot stabilitāti braukšanas laikā. Riepas sastāvs nodrošina labu elastību zemās temperatūrās, kas pozitīvi ietekmē bremzēšanas attālumu un vadāmību. Šīs riepas ir piemērotas braucējiem, kuri vēlas uzticamu un izturīgu risinājumu ziemas sezonai. Tās ir paredzētas gan ikdienas, gan ilgākām braucienām, nodrošinot komfortu un zemu trokšņa līmeni. Mitas Maxima ir izvēle tiem, kas vēlas droši justies uz ceļa, neatkarīgi no laikapstākļiem..

# Mitas Maxima ## Augstas līmeņa sniega un ziemas riepas, kas nodrošina izcilu saķeri un drošību Mitas Maxima ir izstrādāta, lai nodrošinātu maksimālu veiktspēju ziemas apstākļos, tostarp uz sniega, ledu un mitrām virsmām. Tās attīstītā protektora struktūra efektīvi novada ūdeni un sniegu, samazinot slīdēšanas risku un palielinot stabilitāti braukšanas laikā. Riepas sastāvs nodrošina labu elastību zemās temperatūrās, kas pozitīvi ietekmē bremzēšanas attālumu un vadāmību. Šīs riepas ir piemērotas braucējiem, kuri vēlas uzticamu un izturīgu risinājumu ziemas sezonai. Tās ir paredzētas gan ikdienas, gan ilgākām braucienām, nodrošinot komfortu un zemu trokšņa līmeni. Mitas Maxima ir izvēle tiem, kas vēlas droši justies uz ceļa, neatkarīgi no laikapstākļiem..

functions Wireless - powerful and reinforced Clear sound Sound modes with LED indicator Detachable microphone Premium fabric with memory foam ear cushions Technical specifications Model: ZM-HPS700W Weight: 290g Dimensions: 197 x 91 x 188 mm Color: white Headphone driver diameter: 50 mm Headphone impedance: 32ohm±15% Headphone frequency response: 20Hz-20KHz Headphone sensitivity (SPL): 100dB±3dB Wireless version: 2.4 GHz ISM Wireless transmission power: 7dBm Wireless reception sensitivity: -82dbm Wireless transmission distance: 10 m Microphone directionality: omnidirectional Microphone impedance: 2.2K ohms Microphone sensitivity: -42±3dBV Microphone connector type: ø 3.5 mm Virtual 7.1 Chipset: Included Headphone usage time: Max.12H Headphone charging time: 2.5H (5V 500mA) Battery capacity: 1000 mAH Maximum output power: 20mW

ZALMAN’s original LED design provides a wider and brighter LED effect in all directions. ZALMAN’s patent “Vibration Noise Dampener Technology” applied to minimize noise and vibration. The world’s first “Ultrasonic Welding” technology applied to minimize the thickness of the housing and efficient impeller design for maximum cooling performance with low noise levels. Addressable RGB SYNC through Z-SYNC bringing various RGB modes and upgraded effects. EBR Bearing and Dead Zone Zero Technology applied for guaranteed long lifespan PWM supported. For Chroma, use Chroma-supported motherboard or Z-SYNC. Performance Suitable for: Computer case Type: Fan Fan diameter: 12 cm Rotational speed (min): 800 RPM Noise level (high speed): 25 dB Rotational speed (max): 1300 RPM Pulse-width modulation (PWM) support: Y Maximum air pressure: 1 mmH2O Maximum airflow: 43 cfm Mean time between failures (MTBF): 50000 h Bearing type: Fluid bearing Design Number of fans: 3 fan(s) Illumination LED: Y Number of fan blades: 9 Illumination colour: Red/Green/Blue Colour of product: Black, White Fan connector: 3-pin + 4-pin Power Rated current: 0.12 A Voltage: 5-12 V Maximum current: 0.65 A Weight & dimensions Width: 120 mm Weight: 110 g Depth: 120 mm Package width: 147 mm Height: 26 mm Package depth: 142 mm Package height: 184 mm Fan dimensions (W x D x H): 120 x 120 x 26 mm Package weight: 855 g Technical details Sustainability certificates: RoHS Packaging content Number of screws: 4 Screws included: Y Package type: Box

TV mount Hama LCD/LED, VESA 800 x 600, Fix XL (90")Extra flat TV mount with a load capacity of up to 75 kgFunctionality: Easy installation Mounting kit included Suitable for TVs of various sizes High durability: holds TVs up to 75 kg Stable and safe mounting confirmed by tests Mounting very close to the wall Vibration damper Eco-friendly packaging: no plastic, FSC certified materials Long warranty period Quick and easy installationWith the Hama Fix XL TV mount you receive a mounting kit, including dowels from the renowned Fischer brand, a spirit level, drilling diagram, pencil, cable ties and assembly instructions. This will allow you to efficiently mount the TV mount on the wall.CompatibilityThe TV mount is designed for devices with a screen diagonal of 46" to 100" (117 - 254 cm). It complies with the VESA standard from 100 x 100 to 800 x 600. The maximum load capacity of the mount is up to 75 kg.Safety of useThe Hama Fix XL TV mount is completely safe, which has been confirmed by demanding load, stability and functionality tests. The product has a 10-year warranty period. You can safely install it in your home.Mounting close to the wallThe slim profile of this TV mount allows you to mount the TV very close to the wall - at a distance of just 2.1 cm. This allows for a modern interior design, the TV almost blends into the wall.Vibration damperThis TV mount uses a solution that dampens vibrations. This has a positive effect on the reception of sound. Your movie sessions will be even more enjoyable.Environmentally friendly packagingOur packaging is 100% plastic-free, in this way we reduce the amount of plastic waste and facilitate recycling. The paper, cardboard and cardboard in our packaging come from sustainable forestry (FSC certificate) in this way we save wood resources.

SJCAM SJ4000 Full HD 1080P Waterproof Action Camera Sport DVR - A water-resistant casing that allows you to film fascinating water sports; water-resistant up to 30 meters under water; - High definition screen that displays and replays fascinating videos recorded; - Detachable battery that is easy to replace and prolongs your camera’s service life; - Video recording while charging; - Web camera; - Multiple video recording formats: 1080P, 720P, WVGA. Main features: - NTK96650 + AR0330 DSP, better image quality than Hero 2; - High definition screen that displays and replays fascinating videos recorded; - A water-resistant housing allows you to film fascinating water sports; - Multiple photo shooting modes: Single shot, Snapper, Time-lapse; - Multiple video recording formats: 1080P, 720P, WVGA; - Support HDMI HD output function; - Support AV out while Recording with specific USB-to-AV cable (optional); - Car mode makes it working perfectly as a dash cam; - Support web camera function; - Detachable battery that is easy to replace and prolongs your cameras service life; - Support storage cards up to 32GB maximum (Micro SD Card Class4 Above); - Compatible with Most Mounts and Accessories; - Water-resistant up to 30 meters under water; - New Design Beautiful UI. Video HD type: Full HD Maximum video resolution: 1920 x 1080 pixels Maximum frame rate: 60 fps Supported video modes: 480p,720p,1080p Video resolutions: 640 x 480,848 x 480,1280 x 720,1920 x 1080 Video formats supported: H.264,MOV Aspect ratio: 16:9 Analog signal format system: NTSC,PAL Picture quality Photo mode: Y Sensor type: CMOS Total megapixels: 12 MP Effective megapixels (movie): 1 MP Optical sensor size: 25.4 / 3 mm (1 / 3") Maximum image resolution: 4000 x 3000 pixels Image formats supported: JPG Continuous shooting mode: Y Still image resolution(s): 264 x 2448 2560 x 1920 2048 x 1536 1920 x 1080 1280 x 960 640 x 480 Display Built-in display: Y Display: LCD Display diagonal: 3.81 cm (1.5") Audio Built-in microphone: Y Built-in speaker(s): Y Audio recording formats: PCM Lens system Field of view (FOV) angle: 170° Lens type: Wide-angle Focal length range (f-f): 2.99 - 2.99 mm Aperture range (F-F): 2.8 - 2.8 Ports & interfaces USB 2.0 ports quantity: 1 HDMI ports quantity: 1 Storage Maximum memory card size: 32 GB Compatible memory cards: MicroSD (TransFlash) System requirements Windows operating systems supported: Windows 7 Enterprise,Windows 7 Enterprise x64,Windows 7 Home Basic,Windows 7 Home Basic x64,Windows 7 Home Premium,Windows 7 Home Premium x64,Windows 7 Professional,Windows 7 Professional x64,Windows 7 Starter,Windows 7 Starter x64,Windows 7 Ultimate,Wind Mac operating systems supported: Mac OS X 10.10 Yosemite,Mac OS X 10.4 Tiger,Mac OS X 10.5 Leopard,Mac OS X 10.6 Snow Leopard,Mac OS X 10.7 Lion,Mac OS X 10.8 Mountain Lion,Mac OS X 10.9 Mavericks Weight & dimensions Height: 41 mm Weight: 58 g Width: 59.2 mm Depth: 29.2 mm Packaging content Cables included: USB Manual: Y Underwater case: Y AC adapter included: Y Universal mount: Y Design Colour of product: White Protection features: Water resistant,Waterproof Waterproof up to: 30 m LED indicators: Y Features White balance: Auto,Cloudy,Daylight,Incandescent Languages support: Simplified Chinese, Traditional Chinese, German, English, Spanish, French, Italian, Japanese, Portuguese, Russian Power Battery technology: Lithium-Ion (Li-Ion) Battery capacity: 900 mAh Video recording time: 1.17 h Networking Wi-Fi: N GPS (satellite): N

Lime filter: Enjoy clean, fresh-tasting water with the lime filter. Easily removable for cleaning and maintenance. Water Viewing Window: Never boil more than you need with the transparent viewing window with convenient water level indicator markings. 360° base: The swivel base ensures that the kettle is easily accessible from any position on the countertop and is suitable for both right and left-handed people. With indicator lights when boiling, it gives a modern look. Manufacturer Salter Housing material - LED bulbs Yes Teapot rotation 360° Temperature maintenance No Heating temperature - Power 3000W Maximum capacity (l) 1.7 Color Coal Heating element - Cable storage Yes On (heating) indicator Yes Water level indicator Yes Automatic safety shut-off No Automatic shut-off if there is no water - Temperature controller No

The touch switch with an exclusive minimalist design will catch the eye with its aesthetics and elegance. The touch switch will turn on the light as soon as you touch it. The switch ensures simple and reliable operation. The tempered glass panel, fireproof inner casing and steel frame ensure the highest quality. The switch has a built-in LED indicator that shows when the light is on/off and helps you focus in the dark. The switch is suitable for European standard boxes, so old switches can be easily upgraded without additional installation work. Technical data Installation: standard EU (Germany) boxes Connection: standard electrical installation Dimensions: 86mm x 86mm x 35mm Nominal working voltage: 110V - 240V AC Maximum current: 5A Maximum load: 1000W Working environment: from -20 to 70 C Relative humidity up to 10% - 93%

The touch switch with an exclusive minimalist design will catch the eye with its aesthetics and elegance. The touch switch will turn on the light as soon as you touch it. The switch ensures simple and reliable operation. The tempered glass panel, fireproof inner casing and steel frame ensure the highest quality. The switch has a built-in LED indicator that shows when the light is on/off and helps you focus in the dark. The switch is suitable for European standard boxes, so old switches can be easily upgraded without additional installation work. Technical data Installation: standard EU (Germany) boxes Connection: standard electrical installation Dimensions: 86mm x 86mm x 35mm Nominal working voltage: 110V - 240V AC Maximum current: 5A Maximum load: 1000W Working environment: from -20 to 70 C Relative humidity up to 10% - 93%

This SP-XC08 Extension Cable of Falcon Eyes is 8 meter long and made for the LED lights from the RX-T and LPL series. It gives you the possibility to control your lamp on a distance of 8 meters at its maximum with the controller. The cable is placed between the lamp and the controller of the lamp. This extension cable is compatible with the: LPL S1602T LPL 3602TD LPL 2802T-K2 LPL S3602TD LPL S6002TD LPL 1602T RX-9T RX-12T RX-12TD RX-18T RX-18TD

Technical specifications Model: N4 Rev.1 Case form factor: ATX Mid Tower Dimension: 396(D) x 204(W) x 446(H)mm Weight: 4.7kg Materials: Steel, plastic, tempered glass Motherboard support: ATX; mATX; Mini-ITX Maximum VGA length: 315mm Maximum CPU cooler height: 163mm Maximum PSU length: 180mm PCI Expansion slots: 7 Drive bays: 2 x 3.5” Combo (bracket, chassis) 2 x 2.5” (chassis) Fan support: Top : 2 x 120mm Front : 3 x 120mm / 3 x 140mm / 2 x 180mm Rear : 1 x 120mm Bottom : 2 x 120mm Fan(s) included: Top : 2 x 120mm (RGB LED) Front : 3 x 140mm (RGB LED) Rear : 1 x 120mm (RGB LED) Radiator support: Front : 120mm / 240mm I/O Ports: 1 x Headphone, 1 x Mic, 2 x USB 2.0, 1 x USB 3.0, Power Button, Reset / LED Button

Fanttik E1 Max 3.7V electric screwdriver set (gray)Fanttik E1 Max 3.7V is a high-precision electric screwdriver designed for working with delicate parts such as phones, watches, cameras, etc. It combines a compact design with high torque accuracy, providing secure and controlled tightening of small screws. Not designed for desktop computer assembly.Precise torque adjustmentThe device offers three operating modes: high torque of 0.2 Nm, low torque of 0.05 Nm and manual of 3 Nm. Such parameters allow you to adjust the force according to the type of work to be done, which protects components from damage and enables accurate tightening.Set of 50 bitsThe set includes 50 bits in 9 types, made of hardened S2 steel (S2 type alloy steel), which increases their durability and resistance to wear. The rich selection of bits makes it possible to complete a wide range of repairs in one set.Magnetic caseA built-in magnetic holder keeps bits organized and prevents bits from getting lost, and the case's slide-out mechanism provides quick access to tools. The magnetic holder and bits provide a stable hold while working.Powerful battery and fast chargingThe long-life battery allows you to drive up to 400 screws on a single charge. The USB-C (Universal Serial Bus Type-C, a universal connector for data and power) port provides fast and convenient charging, and the up to 200 RPM motor allows you to efficiently complete more intensive tasks.Built-in lightingFour built-in LEDs (Light Emitting Diode) illuminate the work area, eliminating shadows and making it easier to work in poorly lit areas. Intuitive controls - a button on the front for screwdriving and on the back for unscrewing - allow for convenient one-handed operation.Included tweezers USB-A to USB-C cable instruction manual undermining tool electric precision screwdriver magnetic case for storing bits x50 bits aluminum alloy case Manufacturer Fanttik Model E1 Max Color grey Torque 2 levels 0.05 / 0.2 N.m Purpose minor repairs, e.g. of a camera or a watch Magnetic bits S2 50 pieces Rotational speed 200 rpm Battery capacity 350 mAh LED lighting Yes Weight 421 g Dimensions of screwdriver 159 x 16.4 mm Charging time 160-200 min Maximum torque - low level (L) 0.05 Nm Maximum torque - high level (H) 0.2 Nm Maximum torque in manual mode 3 Nm Charging power 5 V ⎓ 0.14 A Rated voltage 3,7 V Rechargeable battery Lithium, 350 mAh Speed (no load) 200 rpm

High-performance CPU cooler with 4D patented corrugated fin design. Application of RDTH (Reverse Direct Touch Heatpipe) for excellent performance with minimum heat resistance. The fan makes use of Zalman's patented Dual Blade impeller for increased CFM and reduced noise. Supports motherboard Addressable RGB sync (3pin). Performance Suitable for: Processor Type: Cooler Supported processor sockets: LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 2011 (Socket R), LGA 2011-v3 (Socket R), LGA 2066, Socket AM3, Socket AM3+, Socket AM4, Socket FM2, Socket FM2+ Compatible processor series: AMD A, AMD Ryzen, Intel® Celeron®, Intel® Core™ i3, Intel Core i5, Intel Core i7, Intel Core i7 Extreme Edition, Intel Core i9, Intel Core i9 Extreme Edition, Intel® Pentium® Fan diameter: 14 cm Rotational speed (min): 800 RPM Rotational speed (max): 1500 RPM Noise level (high speed): 29 dB Maximum airflow: 61 cfm Pulse-width modulation (PWM) support: Y Maximum air pressure: 1.1 mmH2O Bearing type: Fluid Dynamic Bearing (FDB) Design Radiator material: Aluminum Number of fans: 1 fan(s) Colour of product: Black, Grey Illumination LED: Y Material: Aluminium, Copper Illumination colour: Red/Green/Blue Fan connector: 3-pin + 4-pin Number of heat pipes: 5 Power Rated voltage: 12 V Thermal Design Power (TDP): 200 W Weight & dimensions Width: 100 mm Depth: 140 mm Fan dimensions (W x D x H): 140 x 140 x 26 mm Weight: 700 g Height: 160 mm Packaging content Number of screws: 4 Mounting kit: Y Screws included: Y Other features Thermal grease: Y Fan rated voltage: 5 - 12 V

Darkflash C285MP computer case (black)The Darkflash C285MP case is distinguished by its double-sided 0.7 mm thick tempered glass panels, which provide a full view of the installed components while guaranteeing the strength of the design. It is compatible with mATX and ITX motherboards and allows for the installation of up to 9 120mm fans or a combination with 140mm fans, providing ample cooling performance. It also supports water cooling up to 360 mm and offers space for a graphics card up to 410 mm in length and CPU cooling with a maximum height of 160 mm, making it suitable for demanding gaming and professional configurations.Double-sided tempered glassThe Darkflash C285MP features 0.7mm thick tempered glass panels on both sides for component protection and aesthetic appeal. The transparent sides allow a full view of the interior and expose components - you can, for example, mount fans with RGB backlighting. Note: the chassis itself does not have pre-installed backlighting.Advanced cooling optionsThe Darkflash C285MP supports the installation of up to 9 120mm fans or a combination with 140mm fans, allowing you to effectively dissipate the heat generated by your components. Coolers of up to 360 mm can be mounted on the top and bottom walls, increasing water cooling options. The case is compatible with a variety of heatsink configurations, so you can personalize your cooling system.Thoughtful internal designSpace for graphics cards up to 410 mm in length and CPU cooling with a maximum height of 160 mm allows you to install advanced components. The case is designed for convenient access to all components, and numerous mounting points make cable management easy. This allows you to keep its interior tidy, which translates into better air circulation and cooling efficiency.Support for various drive configurationsThere will be hard drive and SSD slots at your disposal, allowing you the flexibility to customize your storage. Up to two 3.5" HDDs and three 2.5" SSDs can be mounted at a maximum. - Such a layout is optimal for both gamers and those working with large amounts of data.Convenience of useThe top panel of the chassis features two USB 2.0 ports and one USB 3.0 port for quick and convenient access to peripherals such as portable drives and controllers. The I/O panel also includes HD audio ports, as well as power, reset and LED backlight control buttons for convenient system control without having to open the case. Manufacturer Darkflash Model C285MP Enclosure type Midi Tower Side panel Tempered glass Motherboard standard M-ATX, ITX Power supply standard ATX at the bottom Slots for internal drives 3.5'' HDD x1/x2; 2.5'' SSD x3; Expansion card slots 5 Max PSU length 240 mm Max length of graphics card 410 mm Max height of CPU cooler 160 mm Max number of fans 9 Fan mounting options Top: 120 mm x3 / 140 mm x2; Side: 120 mm x2 / 140 mm x2; Bottom: 120 mm x3; Rear: 120 mm x1; Water cooling mounting options Side: 120 mm / 240 mm / 280 mm; Top: 120 mm / 240 mm / 280 mm / 360 mm; Bottom: 120 mm / 240 mm / 280 mm / 360 mm; Number of fans installed NO FANS INSTALLED Type of fans No fans installed Buttons and controls LED, Power, Reset Connectors USB 2.0 x2, USB 3.0 x1, HD Audio Material 0.7 mm SPCC Color Black Height 370 mm Width 285 mm Depth 440 mm Weight 8.42 kg

Darkflash C285MP computer case (white)The Darkflash C285MP case is distinguished by its double-sided 0.7 mm thick tempered glass panels, which provide a full view of the installed components while ensuring the durability of the design. It is compatible with mATX and ITX motherboards and allows for the installation of up to 9 120mm fans or a combination with 140mm fans, providing ample cooling performance. It also supports water cooling up to 360 mm and offers space for a graphics card up to 410 mm in length and CPU cooling with a maximum height of 160 mm, making it suitable for demanding gaming and professional configurations.Double-sided tempered glassThe Darkflash C285MP features 0.7mm thick tempered glass panels on both sides for component protection and aesthetic appeal. The transparent sides allow a full view of the interior and expose components - you can, for example, mount fans with RGB backlighting. Note: the chassis itself does not have pre-installed backlighting.Advanced cooling optionsThe Darkflash C285MP supports the installation of up to 9 120mm fans or a combination with 140mm fans, allowing you to effectively dissipate the heat generated by your components. Coolers of up to 360 mm can be mounted on the top and bottom walls, increasing water cooling options. The case is compatible with a variety of heatsink configurations, so you can personalize your cooling system.Thoughtful internal designSpace for graphics cards up to 410 mm in length and CPU cooling with a maximum height of 160 mm allows you to install advanced components. The case is designed for convenient access to all components, and numerous mounting points make cable management easy. This allows you to keep its interior tidy, which translates into better air circulation and cooling efficiency.Support for various drive configurationsThere will be hard drive and SSD slots at your disposal, allowing you the flexibility to customize your storage. Up to two 3.5" HDDs and three 2.5" SSDs can be mounted at a maximum. - Such a layout is optimal for both gamers and those working with large amounts of data.Convenience of useThe top panel of the chassis features two USB 2.0 ports and one USB 3.0 port, providing quick and convenient access to peripherals such as portable drives and controllers. The I/O panel also includes HD audio ports, as well as power, reset and LED backlight control buttons for convenient system control without having to open the case. Manufacturer Darkflash Model C285MP Enclosure type Midi Tower Side panel Tempered glass Motherboard standard M-ATX, ITX Power supply standard ATX at the bottom Slots for internal drives 3.5'' HDD x1/x2; 2.5'' SSD x3; Expansion card slots 5 Max PSU length 240 mm Max length of graphics card 410 mm Max height of CPU cooler 160 mm Max number of fans 9 Fan mounting options Top: 120 mm x3 / 140 mm x2; Side: 120 mm x2 / 140 mm x2; Bottom: 120 mm x3; Rear: 120 mm x1; Water cooling mounting options Side: 120 mm / 240 mm / 280 mm; Top: 120 mm / 240 mm / 280 mm / 360 mm; Bottom: 120 mm / 240 mm / 280 mm / 360 mm; Number of fans installed NO FANS INSTALLED Type of fans No fans installed Buttons and controls LED, Power, Reset Connectors USB 2.0 x2, USB 3.0 x1, HD Audio Material 0.7 mm SPCC Color White Height 370 mm Width 285 mm Depth 440 mm Weight 8.42 kg

IB-138SK-B-II Aluminum pocket for 3.5" SATA hard drivesFunctions:- SATA - SATA connector- Plug & Play and Hot Swap- Compact design (188 mm deep)- Anti-dust flap- 2x power connectors (4 pin and 15 pin)- Aluminum housing- Front-mounted fan- Power button lock- Blue LED- LED diodes indicating power supply and disk access- Available colors: black, silver and beigeThe perfect drive pocketICY BOX pocket was created for SATA hard drives. The connection is made via rear connectors directly on the SATA controller on the motherboard. Cooling the hard disk is ensured by a fan located at the front. Thanks to the built-in "Blue Eye" LED, the pocket stands out among other products.Innovative constructionThe fact that you can disconnect the media from your pocket is not new anymore. However, the carrier itself is perfectly closed, which makes it completely safe during transport. The fan provides excellent hard disk cooling.Not just a castleThe place where you will find the castle also has an additional function. It also serves as a power switch! The hard disk can only be powered if the hard disk is in the pocket. Thanks to this you will never forget to lock your pocket.All good things come in three waysThere are three SATA interfaces: SATA I, II and III (the latter supports a maximum speed of 6 Gbps). Three LEDs indicate power and access to the hard disk as well as the decoration of the front of the pocket. The most important function, of course, is to connect a 3.5 "hard disk.

# Mitas Maxima ## Augstas līmeņa sniega un ziemas riepas, kas nodrošina izcilu saķeri un drošību Mitas Maxima ir izstrādāta, lai nodrošinātu maksimālu veiktspēju ziemas apstākļos, tostarp uz sniega, ledu un mitrām virsmām. Tās attīstītā protektora struktūra efektīvi novada ūdeni un sniegu, samazinot slīdēšanas risku un palielinot stabilitāti braukšanas laikā. Riepas sastāvs nodrošina labu elastību zemās temperatūrās, kas pozitīvi ietekmē bremzēšanas attālumu un vadāmību. Šīs riepas ir piemērotas braucējiem, kuri vēlas uzticamu un izturīgu risinājumu ziemas sezonai. Tās ir paredzētas gan ikdienas, gan ilgākām braucienām, nodrošinot komfortu un zemu trokšņa līmeni. Mitas Maxima ir izvēle tiem, kas vēlas droši justies uz ceļa, neatkarīgi no laikapstākļiem..

Performance characteristics Suitable for: Processor Type: Cooler Supported CPU sockets: LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H), LGA 2011 (Socket R), LGA 2011-v3 (Socket R), LGA 2066, Socket AM3, Socket AM3+, AM4 socket Rotation speed (min): 800 RPM Processor compatibility: AMD A, AMD Ryzen, Intel® Celeron®, Intel® Core™ i3, Intel Core i5, Intel Core i7, Intel Core i7 Extreme Edition, Intel Core i9, Intel Core i9 Extreme Edition, Intel® Pentium® Fan diameter: 14 cm Rotation speed (max): 1500 RPM Noise level (high speed): 29 dB Maximum air flow: 61 cfm Maximum air pressure: 1.1 mmH2O Pulse Width Modulation (PWM) support: Yes Fan Bracket Type: Fluid Dynamic Bearing (FDB) Operating temperature range (TT): -40 - 105 °C Construction Number of fans: 2 fan(s) Product color: Aluminum, Black Material: Aluminum, Copper Lighting LED: Yes Fan connection: 3-pin + 4-pin Number of heat pipes: 6 Certification: CE Energy management Nominal voltage: 12 V Rated current: 0.28 A Thermal Power Output Size (TDP): 300W Weight and dimensions Length: 140 mm Height: 165 mm Fan dimensions (width x depth x height): 140 x 140 x 26 mm Width: 170 mm Weight: 1.3 kg Technical data Sustainability certificates: RoHS Package contents Installation kit: Yes Added screws: Yes Number of screws: 8 Other features Thermal grease: Yes Voltage indicated by the fan: 5 - 12 V

The FL-3300R is a handy yet powerful handheld flashlight from the everActive brand. Its maximum light output of 3300 lumens provides excellent illumination even in complete darkness. The undeniable advantages of our flashlights include high-quality workmanship, versatility, and the use of the most modern solutions available on the market. The everActive FL-3300R flashlight is exceptionally comfortable to use handy and made of durable aluminum characterized by increased durability. Our flashlight is equipped with modern OSRAM P9 LEDs with a power output of up to 10W (each), making it exceptionally powerful for its size. Thanks to its high-quality components, the flashlight feels complete and is suitable for use at home, on a campsite, or during an evening walk in the forest. The device's housing is made of exceptionally durable aluminum and has an IPX4 rating. The device is powered by a high-capacity 4000mAh lithium-ion battery! The battery is replaceable and charges via the USB-C port integrated into the flashlight, with a charging time of approximately 7 hours. The set includes the flashlight, battery, lanyard, and user manual. Everything is beautifully packaged in an elegant gift box, perfect for a gift for a loved one.

Holder Desktop 3 LCD monitors double arms Maclean MC-691 13 "-27" 8kg, vesa 75x75 and 100x100Universal bracket for LCD or LED can be mounted to the top of a desk or table. Handle designed to monitor up to 27 "with a maximum weight of 8 kg on each handle. The handle is made of high quality metal (a combination of steel, aluminum molded pressure and plastic) in black, elements handle the monitor ideally suited to provide stable and safe support to the monitor .LCD Monitor Maclean MC-691 provides great comfort at work optimizes ergonomics and monitor view through the possibility of installing three monitors on one handle.The arm made of high quality steel - has been equipped with heavy-duty mounting bracket, which allows attachment to tabletop or other flat surfaces. Ideal for applications including in the office and at home - without drilling holes in walls or desks.The mount allows installation of up to 3 separate monitors27 inch in the specified standard VESA. Each monitor can weigh up to 8 kg, while the weight of all not exceed 24 kg.