Maximus LED

UNI FAN SL-INFINITY - Software controlled fan speed/ LED lighting- Only one cable is required for a cluster of fans- Embedded magnetic Fluid Dynamic Bearing to provide stability, durability, and longevity- 40 LEDs in each fan- Quick PIN connection to provide ease of installation- Low noise level at high RPM- Infinity mirror look all around UNI FAN SL - INFINITY - Infinity Mirror ARGB Fan Introducing a new look to PC fans and a new level of installation simplicity and light effect customizability. AVAILABLE IN TWO COLORS INFINITY MIRROR FAN A combination of the original UNI FAN SL and AL with a touch of infinity mirror, the SL-Infinity fans glow clear with multi-layer effects from any visible angle. CENTERED INFINITY MIRROR ARGBThe circular-shaped infinity mirror at the center of the fan is tuned to have multiple layers spaced 0.5mm apart. SIDE FRAME ARGBFollowing the iconic angular lighting style of SL fans, the SL-Infinity fans have 2 thin LED strips on both sides of the fan blade. ALUMINUM TRIM SURROUNDED INFINITY MIRRORSurrounding aluminum trims are located on both sides of the frame. The geometric shape of the infinity mirror follows the front ARGB lighting strip in a top and bottom pattern that creates a 3D indented look.   REAR RIM OF LED AROUND THE ALUMINUM LOGO Inspired by AL fans, there is a bright ARGB rim of light around the LIAN LI logo at the rear. UNPRECEDENTED MODULARITY The 2nd generation of UNI FAN SL revisits the interlocking style that can connect up to 4 fans in a cluster and makes cable management simpler and improves compatibility with radiators fittings.   DAISY CHAIN FAN A pin-to-pad contact point passes the signal and power through the fan cluster.   REMOVABLE KEYLOCK The interlocking key on each fan is now removable to improve compatibility with radiators fittings. REVERSIBLE CABLE MODULE The cable module is now placed at the center of the fan and can switch orientation to reduce clearance issues with the radiator inlet and outlet. IMPROVED PERFORMANCE The SL-Infinity 120 features a 10% performance optimization compared to the SL120 which results in better airflow (61.3 CFM), higher static pressure (2.66 mmH2O), and a larger range of fan speed (0, 200 ~ 2100RPM) at lower noise levels (29 dB(A)). L-CONNECT 3 SOFTWARE TO CONTROL SL-INF FANS Control and preview with precision the lighting effect of the SL-Infinity fans with the new L-Connect interface. 1 - Select lighting effect of blades / fan frame / both LED2 - Set personalized color / brightness / speed / direction ENDLESS LIGHTING EFFECTS Similar to the AL fans, L-Connect 3 can set the lighting effects of the SL-Infinity fans for both the fan blades and the fan frame inner edges separately, or go with pre-set combined lighting effects. Option 1. Set the fan blade and inner fan frame lighting modes individually to achieve a custom look. Option 2. Select the combining lighting mode INTELLIGENT START/ STOP FAN Unique to the SL-Infinity fans, L-Connect 3 features a Start/ Stop mode to completely stop the fan when the CPU or GPU is running below your set temperature (the maximum 50°C), achieving minimal acoustic levels when the system is at low temperature. SYNC FAN SPEED TO MOTHERBOARD L-Connect 3 now offers an option to sync fan speed to the motherboard, also known as the PWM mode in the earlier L-Connect version. Click to pass fan speed control to motherboard QUICK SYNC LIGHTING WITH UNI FAN SL/ AL AND STRIMER PLUS V1/V2 The quick sync function saves time to synchronize all LIAN LI device lighting effects with one click. Moreover, synchronize all devices to the motherboard software with one click. Click to pass lighting control to motherboard DAZZLING AT ALL ANGLE SIMPLE CONNECTION WITH CONTROLLER The all-new cable module and controller simplify cable management and provide efficient power to the fans. ONLY ONE CABLE   Combining both the power cable and the lighting cable into a single cable, the cable module uses a 7-pin connector to connect to the c

VEXILAR V10 Pro Cordless Upright Vacuum CleanerThe VEXILAR V10 Pro Cordless Upright Vacuum Cleaner is a modern appliance that combines high suction power of up to 45,000 Pa, a cordless design, a runtime of up to 45 minutes, a lightweight body weighing approximately 2.2 kg, and a practical set of accessories for cleaning various surfaces. The adjustable telescopic tube, removable battery, LED display, green brush backlight, and five-stage CycloneFlow filtration system™ make this vacuum cleaner ideal for both everyday floor cleaning and cleaning hard-to-reach areas. It’s a solution that lets you conveniently keep your home tidy without the limitations of a power cord.Suction power up to 45,000 PaThe motor, which generates suction power of up to 45,000 Pa, effectively removes dust, crumbs, sand, pet hair, and other everyday debris from hard floors and carpets. The vacuum cleaner handles both fine and larger debris, making cleaning faster and requiring fewer passes. Its high performance keeps both small apartments and larger homes clean.Up to 45 minutes of cordless runtimeThe battery provides up to 45 minutes of runtime in Eco mode, allowing you to clean an area of up to approximately 120 m² on a single charge. The cordless design gives you greater freedom to move between rooms and makes it easier to clean stairs and your car. The removable battery can be charged either inside the device or separately, and if needed, you can use an additional battery available separately.Advanced CycloneFlow™ FiltrationThe five-stage CycloneFlow™ filtration system uses multi-stage particle separation and a HEPA filter to effectively separate dust from the airflow. The system captures up to 99.9% of fine particles and allergens as small as 0.1 µm, helping to prevent them from being released back into the environment. This design ensures high vacuuming efficiency and cleaner air expelled from the unit.Lightweight design and adjustable telescopic tubeThe vacuum weighs approximately 2.2 kg, so moving it between rooms requires little effort. The adjustable telescopic tube, which extends from approximately 50 to 70 cm, allows you to adjust the vacuum’s length to suit your height and the type of cleaning task at hand. This makes it more convenient to vacuum both floors and higher surfaces, such as curtains, shelves, or corners near the ceiling.Agile electric brush with green LED backlightThe electric brush rotates 180° sideways and 90° vertically, making it easy to navigate around obstacles and clean under furniture without having to move it. The green LED light with a wide 120° beam angle effectively highlights fine dust, hair, and pet hair that often remain invisible under standard lighting. This allows you to clean even dimly lit areas more thoroughly.Intuitive LED DisplayThe easy-to-read LED screen lets you monitor the device’s key operating parameters in real time. The display shows the battery charge level, the selected operating mode, and the vacuum cleaner’s current settings. All information is available in one place, which simplifies operation and enhances the comfort of everyday use.Easy Emptying and Convenient StorageThe dust bin can be emptied with the push of a button, making debris removal quick and convenient. The dustbin, HEPA filter, and filtration system components can be easily removed and cleaned, making it simple to keep the vacuum cleaner in good condition. The included wall mount allows you to store the vacuum cleaner and its accessories neatly, saving space.Included VEXILAR V10 Pro vacuum cleaner Electric floor brush Telescopic tube Battery HEPA filter Crevice tool 2-in-1 brush Wall mount Charger Brush cleaning tool User manual Manufacturer VEXILAR Model V10 Pro Type Cordless upright vacuum cleaner Suction power up to 45,000 Pa Run time up to 45 minutes (Eco mode) Maximum cleaning area up to approx. 120 m² Weight approx. 2.2 kg Tube length adjustment approx. 50–70 cm Filtration 5-stage CycloneFlow™ system Filter HEPA Filtration ef

Long runtime of up to 35 minutes in eco mode thanks to the powerful 18.5 V lithium-ion battery 2-in-1 function with two power levels, detachable handheld vacuum cleaner for universal use Quick cleaning, easy removal of dust container and filter Efficient dust collection thanks to motorized brush roller with LED Foldable handle makes it easier to reach deep places and saves space Technical data Lithium-ion battery: 18.5V lithium-ion / 2000mAh Charging time: 4-5 hours Maximum power: 120W Dust container capacity: 650 ml Eco mode operating time: 35 minutes Color: white/black Noise level: 79 dB Weight: 2.60 kg Manufacturer Severin Cleaning type Dry Purpose Floor, car Dust collection method Container Dust container capacity 0.65L Power, W 120 Noise level (dB) 79 Adjustable power Yes Battery type Lithium-ion Battery voltage 18.5V Charging time 4-5 hours Operating time 35 minutes Weight 2.60 kg Color white, black

Technical data Installation type: Floor, mobile for LCD/LED TV Maximum load (kg): 10 kg per shelf (total 20 kg) Vertical tilt: - 35° / +35° For curved screens: No Cable management: No Detachable VESA plate: No Height adjustment: 772-872 mm Shelf dimensions (mm): 1 shelf: MDF 450x450 with edging 2nd shelf: MDF 300x450 Color: black/silver Material: MDF/PVC/Steel Surface finish: Powder coating Dimensions (mm): 772x572x(772-872)

Uni-T True RMS UT18B MAX Digital MultimeterThe Uni-T UT18B MAX is the most advanced model in this series, designed for users who need not only standard electrical measurements but also an additional LED testing function. The device measures DC and AC voltage up to 1000 V, DC and AC current up to 10 A, as well as temperature in the range from -55°C to 500°C. It maintains high precision and practicality, making it ideal for everyday use.Practical features for service workThe model features a display with a maximum reading of 6000, as well as continuity test, Data Hold, relative mode, and adjustable backlight functions. Compared to other models in the series, it stands out with a dedicated LED diode test function, though it does not include a MAX/MIN mode. Automatic and manual range switching, auto-off, and intuitive operation ensure ease of use across various applications.Expanded capabilities and full safetyThe multimeter comes with a Type K thermocouple, allowing the user to immediately utilize the temperature measurement function. Safety is ensured by a wrong-wire connection alarm and CAT III 600V overvoltage protection. This model is designed for users who expect greater functionality and want a tool that is also useful for testing LED lighting.Included Digital multimeter User manual Standard gold-plated test leads x2 Test leads with fine tips x2 Batteries x2 Type K thermocouple x1 Specifications Manufacturer Uni-T Model UT18B MAX Type True RMS digital multimeter DC voltage 600.0 mV / 6.000 V / 60.00 V / 600.0 V / 1000 V ±(0.4%+3) AC Voltage 600.0 mV / 6.000 V / 60.00 V / 600.0 V / 1000 V ±(0.5%+5) VFD 600.0 V ±(8%) AC current 600.0 µA / 6000 µA / 60.00 mA / 600.0 mA / 6.000 A / 10.00 A ±(1.2%+3) DC current 600.0 µA / 6000 µA / 60.00 mA / 600.0 mA / 6.000 A / 10.00 A ±(1.2%+3) Resistance 600.0Ω to 60.00MΩ ±(0.5%+2) Capacitance 6.000nF to 6000µF ±(2.0%+5) Frequency 10Hz ~ 10MHz ±(0.1%+3) Duty Cycle 1% ~ 99.9% ±(1.0%+4) Temperature -55°C to 500°C ±2°C / ±4°F Display 6000 Continuity Test Yes Diode Test Yes LED Diode Test Yes Data Hold Yes MAX/MIN Mode No Relative Mode Yes Backlight Adjustable Range switching Automatic and manual Auto power off Yes Wake-up with any button Yes Visual and audible alarm Yes Warped wire connection alarm Yes Voltage category CAT III 600V Power Supply 2x 1.5V AA batteries Weight 455 g Dimensions 182 mm × 91 mm × 45 mm Color Red and gray

The KUPO 023 Midi Pro Stand is a lightweight yet sturdy aluminium light stand designed for photo and video lighting equipment. It is suitable for LED lights, flash heads, small studio accessories and other gear weighing up to 5 kg. The stand features a 3-section design and reaches a maximum height of 250 cm, while folding down to a compact length for transport. The top mount is a standard 5/8" / 16 mm baby stud with a 3/8"-16 male thread, making it compatible with a wide range of photo and video lighting accessories.

The Ermenrich LN20 is a portable self-leveling laser level that generates four lines of green color in the horizontal plane. Horizontal sweep – full 360°. The tool is ideal for use in construction and renovation work as well as for the installation of equipment and lighting. The large working distance allows you to cover a large perimeter without having to move the device around – it can reach even a distant wall. A compensator reduces vibrations and automatically aligns the laser plane. The built-in lithium rechargeable battery of the Ermenrich LN20 laser level provides a long battery run time, which depends on the selected brightness level (four options available). Even at maximum brightness, the LEDs will last up to 8 hours, which means you don’t have to recharge the laser level during the entire work shift. The laser level is shock-, dust-, and splashproof. Conveniently, it can be mounted on a tripod with a standard 1/4" thread. Key features: 4 green lines, horizontal sweep – full 360° Working distance – up to 30m (100ft), brightness adjustment Built-in rechargeable battery is charged from the AC power supply via USB Rugged body is dust- and shock-proof Tripod mountable Compact and ergonomic design The kit includes: Laser level Case L-shape bracket AC adapter (USB Type-C) User manual and warranty card BrandErmenrichWarranty5 летEAN5905555021751Package size (LxWxH)9x14x11 cmShipping Weight0.485 kgLaser level type4 linesNumber of horizontal planes1Horizontal sweep, °360Accuracy±1.5mm/5mWorking distanceup to 30mLaser beam colorgreenSelf-leveling systemyesCompensator operating range, °4±1Pulse modeyesAdaptable to a tripodstandard 1/4" threadPower supply2000mAh built-in lithium rechargeable battery, charging from the power supply via USB Type-C (adapter included)Brightness adjustmentyesBattery life, h8 - 16Laser class2Wavelength, nm505–550IP water and dustproof ratingIP54, partially dustproof, splashproofOperating temperature range, °C-10 - 50Shock-proofyes

Expand your TV/monitor with additional HDMI ports conveniently switch between signal sources without having to reconnect them.The DIGITUS 8K HDMI Switch, 4x1 offers additional HDMI ports for display output 4 signal sources can be connected to a screen via a single HDMI port. Audio signals can also be separated using Toslink or 3.5mm stereo and played separately. Conveniently switch between signal sources using the remote control, the device itself, or via auto-detection. Convenient switching between 4 signal sources using the remote control, the device itself, or auto-detection. Audio extractor: Toslink/stereo (3.5mm) - decoupling and separate audio playback. EDID switch/management. Maximum resolution: 8K/60Hz (4:4:4) Video bandwidth: 48 Gbps Maximum HDTV resolution: 7680 × 4320 pixels, 60Hz. HDTV standard: Ultra HD 8K. Connections: 4x HDMI inputs (8K/60Hz) 1x HDMI output (8K/60Hz) 1x Toslink 1x 3.5mm audio 1x Micro USB input - Service 1x DC jack (power) - power supply connection 8x status LEDs 1x switch 1x IR receiver 1x EDID switch

Flytec V050 12000mah bait boat (moro)The V050 boat is designed for maximum efficiency. It has a capacious tank that holds up to 2 kg of bait, so you can bait the fishery at several points without having to return to shore. The remote-controlled opening mechanism allows you to accurately drop the groundbait at the desired spot, which significantly increases the effectiveness of fishing.Impressive control range - up to 500 mThanks to 2.4 GHz technology, you can control your boat at a distance of up to 500 meters without worrying about signal loss or interference. Stable transmission gives you full control over every maneuver even on large bodies of water.Stable and fast on the waterDual high-performance motors provide high power and smooth handling. The V050 can reach speeds of up to 250 m/min, while handling waves and winds of 7-8. This means you can use her even in adverse weather conditions.One Key Cruise functionYou don't need to control the throttle all the time - just activate the constant cruise speed mode to make the boat sail steadily and steadily. You, meanwhile, can focus on controlling the direction or preparing your gear.Ready for night fishingThe boat is equipped with powerful LED lights - two white reflectors at the bow and blue lights at the stern. This makes it easy to determine the direction of your boat, and the craft remains visible even in the dark, making night fishing safer and more comfortable.Dual power supply and long runtimeThe 12.1 × 6.1 × 8 cm battery compartment accommodates two batteries simultaneously - both 5200 mAh and 12000 mAh. The boat can operate for up to 6 hours on a single charge, making it a reliable tool for long fishing sessions.Smart safety featuresThe V050 is equipped with a low battery alarm system - when the battery is close to draining, the controller will beep, giving you time to return to shore.Convenient controlThe 2.4GHz remote control is simple and intuitive. It offers functions such as direction control, opening the bait tank, lighting control, constant speed mode or precise trim adjustment. This ensures that full control is always at your fingertips.Included Bait boat Remote control Rechargeable battery USB cable Spare propellers (2 pieces) User manual Manufacturer Flytec Model V050 Color Moro Material ABS Payload 2kg Dimensions 49 x 26.4, 28.1 cm Range 500 m Frequency 2.4 GHz Speed 250 m/min Operating time 2-6 h (depending on battery) Battery 7.4 V 12000 mAh Remote control power supply 2 x AA 1.5 V (sold separately)

Flytec V050 12000mah bait boat (black)The V050 boat is designed for maximum efficiency. It has a capacious tank that holds up to 2 kg of bait, so you can bait the fishery at several points without having to return to shore. The remote-controlled opening mechanism allows you to accurately drop the groundbait at the desired spot, which significantly increases the effectiveness of fishing.Impressive control range - up to 500 mThanks to 2.4 GHz technology, you can control your boat at a distance of up to 500 meters without worrying about signal loss or interference. Stable transmission gives you full control over every maneuver even on large bodies of water.Stable and fast on the waterDual high-performance motors provide high power and smooth handling. The V050 can reach speeds of up to 250 m/min, while handling waves and winds of 7-8. This means you can use her even in adverse weather conditions.One Key Cruise functionYou don't need to control the throttle all the time - just activate the constant cruise speed mode to make the boat sail steadily and steadily. You, meanwhile, can focus on controlling the direction or preparing your gear.Ready for night fishingThe boat is equipped with powerful LED lights - two white reflectors at the bow and blue lights at the stern. This makes it easy to determine the direction of your boat, and the craft remains visible even in the dark, making night fishing safer and more comfortable.Dual power supply and long runtimeThe 12.1 × 6.1 × 8 cm battery compartment accommodates two batteries simultaneously - both 5200 mAh and 12000 mAh. The boat can operate for up to 6 hours on a single charge, making it a reliable tool for long fishing sessions.Smart safety featuresThe V050 is equipped with a low battery alarm system - when the battery is close to draining, the controller will beep, giving you time to return to shore.Convenient controlThe 2.4GHz remote control is simple and intuitive. It offers functions such as direction control, opening the bait tank, lighting control, constant speed mode or precise trim adjustment. This ensures that full control is always at your fingertips.Included Bait boat Remote control Rechargeable battery USB cable Spare propellers (2 pieces) User manual Manufacturer Flytec Model V050 Color Black Material ABS Payload 2kg Dimensions 49 x 26.4, 28.1 cm Range 500 m Frequency 2.4 GHz Speed 250 m/min Operating time 2-6 h (depending on battery) Battery 7.4 V 12000 mAh Remote control power supply 2 x AA 1.5 V (sold separately)

PXN WDS R2 gaming steering wheelThe PXN WDS R2 is a modular racing wheel designed for professional simulators and gamers who want maximum control. It is compatible with PXN VD4, VD6 and VD10 bases. It features a 300mm diameter rim, trimmed with high-quality microfiber. Personalization features are also available. With 13 programmable buttons, a 20-degree rotary encoder and RGB backlighting, the device can be customized to suit any track and riding style.Faster and more reliable gear shiftsThe precision Hall-Effect paddle system offers two modes of operation - the upper magnetic paddles provide clear and quick gear shifts, while the lower paddles guarantee smooth, linear movement for precise control.Instant assembly and disassemblyThe Quick Release system allows you to mount and dismount the handlebars without tools, allowing you to change the configuration in seconds. The sturdy mounting ensures stability and security even under heavy loads.Comfort for long racesThe rim of the steering wheel is upholstered with premium microfiber, which guarantees a firm grip, abrasion resistance and comfort during long races. Red stitching and a sporty design emphasize its racing character.Personalization without limitsThe steering wheel offers 11 customizable RGB LEDs that can act as an engine rev indicator or light effect for greater immersion. A 20-position push-button encoder allows quick adjustment of brake balance, ABS, or traction control. On top of that, there are 13 programmable buttons that, in conjunction with PXN SimRacing software, can be freely assigned - from camera control to pit strategy.Compatibility with the best gamesThe PXN WDS R2 works with Windows 7-11 PCs and is compatible with the most popular racing titles, including, Assetto Corsa, Forza Horizon 5, DiRT Rally 2.0, F1 Series, EA WRC, Project CARS 2, Euro Truck Simulator 2, American Truck Simulator, Le Mans Ultimate and many more. This gives you maximum freedom of choice and a realistic experience no matter what you play. Manufacturer PXN Model WDS R2 Connection method Quick release Rim material Microfiber leather Handlebar diameter 300 mm Blade material Aluminum alloy, Hall Effect technology Steering wheel illumination RGB PC software Supported Compatible platform PC (Windows) PC mode D-input Pedal technology Hall linear induction pedal Weight of the steering wheel Approximately 1500 g Programmable buttons 12 Aluminum magnetic paddles 4 pcs. Backlighting 11 LEDs Rotary knob 20-stage Color Black Connection type Wired Connectivity technology USB

NEEWER SR004 Universal Shoulder MountThe NEEWER SR004 is a compact and versatile shoulder mount that provides enhanced stability while filming and ensures comfort even during long filming sessions. The design features detachable and adjustable components—including 15mm rails, handles, a mounting base, and a shoulder pad—allowing the entire rig to be easily customized to your needs and conveniently transported. This model is ideal for DSLR cameras, mirrorless cameras, compact camcorders, or telephoto lenses, offering a maximum load capacity of up to 5 kg.Universal Base and Extensive Expansion OptionsThe mount is equipped with a universal base plate featuring numerous 1/4" and 3/8" threads, ensuring compatibility with most camera rigs and photography accessories. The design allows for direct mounting of a camera or camcorder, as well as easy expansion with additional equipment such as a monitor, LED lighting, a magic arm, or a follow focus system. The 15mm rails offer additional mounting space at the front and rear, making it easier to configure the equipment for advanced filmmaking applications.Comfortable Grips and Ergonomic Shoulder SupportTwo rotating handles with a soft silicone finish ensure a secure grip and comfort during handheld recording. The adjustable distance between the grips and 360° rotation allow you to easily adapt the setup to your working style and filming conditions. User comfort is further enhanced by an ergonomic shoulder pad made of flexible foam, which helps reduce fatigue and allows for better balancing of the rig by adjusting the center of gravity.In the Box Shoulder mount body Crossbar Handle x2 1/4" screw x2 L-shaped Allen wrench User manual Specifications Manufacturer NEEWER Model SR004 Material Aluminum alloy, foam, silicone Crossbar length 30 cm Rail length 40 cm Rail diameter 15 mm Maximum load capacity 5 kg Dimensions 574 × 306 × 206 mm Weight 1250 g

The CORSAIR NAUTILUS RS ARGB Liquid CPU Cooler showcases CORSAIR's excellence in engineering and design, offering efficient, quiet cooling with simple connectivity no controller required, just plug directly into the motherboard. Its slightly convex cooling plate with pre-applied thermal paste ensures excellent heat transfer, while the RS120 ARGB fans keep temperatures low for maximum CPU performance. Eight RGB LEDs on the pump head and each fan illuminate the system with easy control of the motherboard. Simplify your design with easy serial connections and precise cooling control via the 4-pin PWM fan connector. For more advanced control, you can use the optional iCUE controller (sold separately). Supporting a wide range of Intel and AMD processor sockets, including LGA 1851, NAUTILUS RS offers broad system compatibility.

Technical data Product color: Black, Stainless Steel, Transparent On/off button: Yes Adjustable thermostat: Yes Body material: Stainless steel Built-in screen: Yes Screen type: LEDs Built-in timer: Yes Timer duration (maximum): 72 h Bisphenol A (BPA) free: Yes Tray dimensions (width x depth): 310 x 242 mm Number of pallets: 6 Energy management Energy: 250 W AC input voltage: 220 - 240 V AC input frequency: 50 - 60 Hz Weight and dimensions Width: 430 mm Length: 345 mm Height: 185 mm Weight: 3 kg

Technical details Colour of product: Black,Stainless steel,Transparent On/off switch: Y Adjustable thermostat: Y Housing material: Stainless steel Built-in display: Y Display type: LED Integrated timer: Y Timer duration (maximum): 72 h Bisphenol A (BPA) free: Y Tray dimensions (W x D): 310 x 242 mm Number of trays: 6 Weight & dimensions Width: 430 mm Depth: 345 mm Height: 185 mm Weight: 3 kg Power Power: 250 W AC input voltage: 220 - 240 V AC input frequency: 50 - 60 Hz

Technical specifications Case form factor: ATX Mid Tower Dimensions: 481(D) x 220 (W) x 488 (H) mm Weight: 9kg Materials: Plastic, steel, tempered glass Motherboard support: ATX / mATX / Mini-ITX Maximum VGA length: 395mm Maximum CPU cooler height: 173mm Maximum PSU length: 200mm PCI expansion slots: 7 pcs Drive bays: 3.5" : 2 ( 1x Cage combo, 1 x Guide toolless) 2 .5" : 2 Fan Support: Front : 3 x 120mm / 3 x 140mm Top : 3 x 120mm / 2 x 140mm Rear : 1 x 120mm Bottom : 2 x 120mm Side : 2 x 120mm Fan(s) included: Front : 3 x 120mm (ARGB/ZM-IF120) Rear : 1 x 120mm (ARGB/ ZM-IF120) Radiator support: Front : 120mm/ 140mm/ 240mm/ 280mm / 360mm Top : 120mm / 140mm/ 240mm/ 280mm/ 360mm Rear : 120mm I/O Ports: 1 x Headphones, 1 x MIC, 2 x USB 3.0, 1 x USB Type-C, Reset Button, LED Button, Power Button

Technical data Case form factor: ATX Mid- Tower Dimensions: 473(D) x 245(W) x 496(H)mm Weight: 9.6kg Materials: Plastic, steel, tempered glass Motherboard support: E-ATX / ATX / M-ATX / Mini-ITX Maximum VGA length: 390mm Maximum CPU cooler height: 185mm Maximum PSU length: 270mm PCI expansion slots: 7 pcs 3 pcs (Vertical 65mm) Drive bays: 3.5” : 2 x 2.5" SSD/HDD or 2 x 3.5" HDD 2.5” : 3 x 2.5” SSD/HDD or 2 x 3.5” HDD Fan support: Front: 3 x 120mm / 3 x 140mm / 2 x 200mm(H: 25mm) Top: 3 x 120mm / 2 x 140mm Rear: 1 x 120mm / 1 x 140mm Fan(s) included: Front: 3 x 140mm (ARGB) Rear: 1 x 140mm (ARGB) Radiator support: Front: 120mm / 140mm / 240mm / 280mm / 360mm Top: 120mm / 140mm / 240mm / 280mm / 360mm Rear: 120mm / 140mm I/O Ports: USB3.0 x 2, USB2.0 x 2, USB 3.1 Gen2 Type-C x 1, Mic, HD Audio, LED button, Reset button, Power button with HDD LED

Case form factor: ATX Mid- Tower Dimensions: 473 (D) x 245 (W) x 496 (H) mm Weight: 9.6kg Materials: Plastic, steel, tempered glass Motherboard support: E-ATX / ATX / M-ATX / Mini-ITX Maximum VGA length: 390mm Maximum CPU cooler height: 185mm Maximum PSU length: 270mm PCI expansion slots: 7 pcs, 3 pcs (Vertical 65mm) Drive bays: 3.5” : 2 x 2.5” SSD/HDD or 2 x 3.5” HDD 2.5” : 3 x 2.5” SSD/HDD or 2 x 3.5” HDD Fan support Front: 3 x 120mm / 3 x 140mm / 2 x 200mm (H: 25mm) Top: 3 x 120mm / 2 x 140mm Rear: 1 x 120mm / 1 x 140mm Fan(s) included Front: 3 x 140mm (ARGB) Rear: 1 x 140mm (ARGB) Radiator support Front: 120mm / 140mm / 240mm / 280mm / 360mm Top: 120mm / 140mm / 240mm / 280mm / 360mm Rear: 120mm / 140mm I/O ports USB3.0 x 2, USB2.0 x 2, USB 3.1 Gen2 Type-C x 1, Mic, HD AUDIO, LED button, Reset button, Power button with HDD LED

Design LED Desk Lamp with Inductive Charging Station/Qi Wireless Charger and USB Connections Unique design with energy-saving LED technology Side LED panel (120° adjustable) for softer and more even lighting The lamp head can be turned sideways 180 ° Touch sensor with adjustable brightness from 10% to 100% and adjustable light temperature from 2700K to 6500K for pleasant lighting Inductive charging station for wireless charging for all Qi-enabled smartphones or devices with Qi-compatible covers 2 Smart Quick USB ports for charging your smartphone or tablet and connecting mobile devices, for example. the speaker Power consumption: 120 W Dimensions: approx. 275mm x 60mm x 320mm (folded) Power consumption: Max: 60 W (power supply) Min: 0.5 W (LEDs off, devices not connected) Maximum power: USB connections, total: 5 V, max. 2 A, DC (DC) Qi wireless port: 5V, max. 2 A, DC (DC) Energy efficiency class: A Luminaire: 108 Osram / Philips high power LEDs, max. 5 W total power Illumination: 950 lux at a distance of 30 cm (adjustable) Color temperature: 2700K to 6500K, warm white / cool white (adjustable)