Maximus LED

Flytec V900 12000mah bait boatThe Flytec V900 is an advanced bait boat that combines high capacity, precise control and long run time to make fishing as easy and enjoyable as possible. With two independent bait chambers, a range of up to 500 meters and support for as many as 40 location points, it allows effective baiting even in difficult conditions and on large bodies of water. The waterproof design guarantees reliability for a long time. The navigation system uses GPS and Beidou at the same time, and the 2.4 GHz band communication ensures a stable control signal. The kit includes a remote control.Nailing with maximum precisionDual silos with a total payload capacity of about 1.8 kg make it possible to transport a considerable amount of bait. With independent control of each chamber, you can freely decide when and where to dump the mixture. The electromagnetic opening system works quietly without scaring the fish, which increases the effectiveness of fishing. As an added convenience, hook holders in each tray allow you to conveniently transport your set to the desired location. You can operate the whole thing with one button, which saves time and ensures precise baiting.Efficient drive and stabilityThe boat is equipped with two powerful motors with anti-tangle protection and improved three-bladed propellers for more power and longer life. The built-in gyroscope automatically corrects the trajectory, making the Flytec V900 sail stably even against the wind, in waves or with a full load. With the one-button auto-drive function, the boat can sail in a straight line at a constant speed - without the need for constant maneuvering.GPS and automatic returnThe dual GPS + Beidou satellite navigation system allows the boat to record as many as 40 location points. The automatic return function makes the boat return to the starting point on its own in case of low charge, loss of signal or exceeding the maximum range of 500m. In addition, an electronic fence protects the boat - in low power mode it will not sail further than 150 meters from the starting point.Long operating timeThe boat is powered by a 12,000 mAh 7.4V lithium battery, which provides up to 4-6 hours of operation on a single charge - long enough to handle multi-hour fishing sessions without interrupting fishing. The capacious compartment also allows you to use an additional battery (not included) to further extend the operating time. A built-in alarm system will let you know when the charge is low - the boat's lights will start flashing and the remote will beep.Comfort in all conditionsThanks to two-color LED lights and a front reflector, the boat is perfectly visible from a distance - even after dark, in fog or rain. The unique LED directional lights allow you to distinguish the turning side of the boat, which increases steering precision and safety. Special Highlighted Atmosphere Light makes the craft visible even at a great distance at night. The ergonomic handle makes it easy to carry, and the impact-resistant ABS hull ensures durability even under heavy use. A double-layer sealing ring and closed, seamless construction further protect the electronics from water. As a result, the boat operates safely even on rough water.Full control in your handsThe remote control with LCD display offers clear information about stored GPS points and simple operation of all functions. The control range of up to 500 meters guarantees freedom and reliability, and the auto cruise mode with constant speed allows you to comfortably drive the boat without the need for constant maneuvering. The controller's screen displays key information, including the boat's charge level, GPS signal strength, distance, direction and active navigation points - everything you need while fishing.Included: Bait boat Remote control Lithium rechargeable battery Power charger Set of drive and mounting parts (screws, covers, nuts) Mounting bracket x2 Antenna for the remote control Connection cable User manual Manufa

Technical details: -10 inch / 25cm diameter Ring Light -Adjustable color balance 3500K - 5500K (White, Natural, Warm) -Adjustable Brightness (10%-100%) -Durable pearl silver coated aluminum alloy core -120 High quality individual LEDs -Easy setup and operation -Tripod included (adjustable height 55cm - 73cm) -USB Plug 5v/2a (works with a Power Bank or USB-AC Plug) -Compatible with all smartphones and Action cams -Compatible with DSLR cameras (maximum recommended total weight 2kg/4lb) -Bluetooth shutter included -Carry case included Package includes: 10 inch Ring Light, Tripod, Bluetooth shutter, Universal smartphone clamp, DSLR & Action cam attachment adapter with ¼ inch thread, User manual, Carry case, Light controller, USB Plug Package weight : 2,2 kg Package dimensions : 85 x 314 x 322 mm

The NimbleTech Cast Go is a wireless presentation system designed for seamless screen sharing. It includes a QuattroPod Lite Receiver (LR10) and Transmitter (LT10) for high-quality 4K casting with low latency over a 5GHz Wi-Fi network. Ideal for meetings and presentations, it supports multiple resolutions and features HDCP protection for secure content streaming. The NimbleTech Cast Go is a powerful wireless screen-sharing solution that enhances collaboration in meetings, classrooms, and professional settings. The package includes the QuattroPod Lite Receiver (LR10) and Transmitter (LT10), along with essential accessories for a hassle-free setup. The LR10 receiver features a dual-core RISC CPU and supports output resolutions up to 4K UHD (2160p@30Hz), ensuring crisp and clear visuals. It operates on a 5GHz Wi-Fi network with a maximum bandwidth of 866Mbps for a stable and responsive casting experience. The compact design includes an HDMI output, a reset button, and LED indicators for power and status. The LT10 transmitter is equipped with a high-performance RISC CPU and supports various input resolutions, including Full HD (1920x1080@60Hz) and 4K UHD (3840x2160@30Hz). It features HDMI and USB-C inputs (through an adapter) for versatile connectivity with different devices. The 5GHz Wi-Fi module ensures smooth and lag-free transmission, while HDCP protection maintains secure content streaming. With intuitive plug-and-play functionality, one-button screen mirroring, and robust wireless performance, the NimbleTech Cast Go is the perfect tool for effortless presentations and collaborations. Key Features: Wireless 4K UHD screen sharing over a 5GHz Wi-Fi network Includes QuattroPod Lite Receiver (LR10) and Transmitter (LT10) HDMI and USB-C input compatibility (LT10) HDCP 1.4 and 2.x support for secure content transmission Low-latency streaming with stable connectivity (Wi-Fi 802.11ac/n) LED indicators for power and status monitoring Compact and lightweight design for easy portability Plug-and-play functionality with no software installation required Specifications: Receiver (LR10): CPU: Dual Core RISC Output Resolution: 720p@50/60Hz, 1080p@50/60Hz, 2160p@24/30Hz I/O: HDMI Out (HDMI 1.4), Reset Button, DC 5V Wi-Fi: 802.11ac 2T2R, max. bandwidth 866Mbps Wi-Fi Frequency: 5.150GHz - 5.825GHz Power Supply: DC 5V, 1.5A max. Power Consumption: Standby ~5W, Casting ~7.5W Operating Temperature: 0°C to 40°C Transmitter (LT10): CPU: High Performance RISC Input Resolution: Supports VESA and CEA resolutions up to 4K UHD (3840x2160@30Hz) I/O: HDMI In, USB-C In (via adapter), DC-in, Mirror Control Button, Reset Button Wi-Fi: 802.11n 1T1R, max. bandwidth 433Mbps Wi-Fi Frequency: 5.150GHz - 5.825GHz Power Supply: DC 5V, 0.9A Power Consumption: Standby ~2W, Casting ~2.5W Operating Temperature: 0°C to 40°C

C27G4Z2 The C27G4Z2 delivers performance built for competition on a 27-inch curved Full HD VA panel, providing smooth and detailed visuals. An overclocked 260 Hz refresh rate and 1 ms GtG response time ensure minimal blur and exceptional motion clarity. Low input lag translates into precise and immediate responsiveness. HDR10 support enhances colors and contrast for a more realistic visual experience, while the height-adjustable stand provides greater comfort during long gaming sessions. 1500R CurvatureThe curved design surrounds the user, placing them right at the center of the action and providing an immersive gaming experience. 260Hz (OC, 240Hz Native)260Hz (OC, 240Hz native) fully unleashes the potential of high-end graphics cards, delivering unprecedented smoothness. Every detail is clearly defined, and every movement is displayed with crystal clarity -- allowing your reactions to become part of the action and taking your gaming experience to the next level. FHD ResolutionWant to watch Blu-ray movies in excellent quality, play games in high resolution, or read sharp text for office applications? With Full HD resolution of 1920 x 1080 pixels, this monitor makes it possible. Whatever you are viewing, Full HD displays it with rich detail without requiring a high-end graphics card or consuming significant system resources. Fast VAImmerse yourself in deeper blacks and vivid contrast. Bright, lifelike visuals make your games look better than ever before. 1ms GTG Response Time - Grey-to-GreyGtG stands for Grey-to-Grey and measures how long it takes a pixel to transition from one shade of grey to another. In gaming, every millisecond counts and can determine whether you land a successful shot or miss. A fast response time also eliminates ghosting and motion blur. Experience Gaming to the Fullest with HDR10HDR10 takes image quality to the next level by improving synchronization between your graphics card or console and the monitor. This creates a more realistic, immersive, and smooth gaming experience: you'll feel like you are stepping into the game, frame by frame. Low Input LagUnleash your reflexes by switching to AOC Low Input Lag Mode. Forget about visual extras: this mode switches the monitor to settings that prioritize pure response time, giving you a decisive advantage in close encounters where fractions of a second make all the difference. 0.3ms MPRT Response TimeExperience truly immersive gaming. Whether you are playing a fast-paced racing game or taking part in a high-stakes battle, every millisecond counts! A 0.3ms MPRT monitor can be your ticket to gaming excellence, with an ultra-fast response time and smooth gameplay. Adaptive SyncAdaptive Sync technology synchronizes the monitor's vertical refresh rate with the frame rate delivered by the graphics card, providing smoother gameplay by eliminating screen tearing, frame drops, and loss of fluidity. This feature is also useful when watching movies and other moving images, ensuring smoother display performance. G-MENUAOC G-Menu is a free tool that can be installed on your computer, providing full customization combined with maximum convenience.

B850M Steel Legend WiFiThe Steel Legend represents the philosophical state of rock-solid strength and stunning aesthetics. Built with the most desirable technologies and features, the Steel Legend series is designed for everyday users and mainstream enthusiasts! The use of robust materials and components ensures complete stability and incredible performance.Exclusive 20K Capacitors with a Capacity of 1000uFThe improved 20K Black capacitors not only extend the lifespan to 20,000 hours but also increase the capacitance from 560uF to 1000uF, providing a number of benefits. Higher charge storage capacity ensures better handling under heavy loads. Less output power fluctuations improve performance. Stable power supply minimizes voltage fluctuations. Greater Reliability and Consistent Performance 12+2+1-PHASE POWER SUPPLYReliable components ensure seamless power delivery to the CPU. Furthermore, they offer unmatched overclocking capabilities and the highest performance at the lowest temperatures for professional gamers.Dr. MOSDr. MOS is an integrated power supply solution optimized for voltage synchronization in multiple applications! Compared to traditional MOSFETs, it intelligently delivers voltage to each phase, ensuring lower operating temperatures and higher performance.Hi-Density Power ConnectorCPU overclocking requires more power. ASRock's High-Density Power Connectors are designed to withstand higher currents compared to traditional CPU and ATX power connectors, ensuring more stable system operation and reducing the risk of fire during intense overclocking.2-Ounce Copper PCB Lamination2 oz of copper in the internal laminate layers ensure stable and reliable signal transmission! Copper PCBs ensure low operating temperatures and high power efficiency for overclocking.DDR5 XMP and EXPO SupportBased on a design philosophy of stability and reliability, ASRock makes no compromises on any detail. These motherboards are built with high-quality materials, and enthusiasts can enjoy increased DDR5 memory overclocking performance, including pre-tested profiles. Ensure your memory modules support Intel XMP/AMD EXPO technology for affordable, satisfying, and hassle-free overclocking.PCIe Gen5 Blazing M.2This motherboard is ready for a wide range of M.2 devices, including PCI Express 5.0 M.2 SSDs, which are ready to operate at twice the speed of the previous 4th generation, delivering lightning-fast data transfer rates.DIY-Friendly DesignEquipped with an enlarged latch for easy installation, simplifying both the installation and removal of graphics cards.Aluminum HeatsinkThe first thing that catches the eye is the optimized aluminum heatsink design. Heatsinks are crucial for efficient heat dissipation, especially during heavy loads like gaming or productivity tasks. A motherboard with heatsinks can effectively manage thermal performance, ensuring trouble-free system stability and durability. Enhanced M.2 CoolingThe bottom M.2 heatsink effectively dissipates heat from the M.2 SSD through the motherboard's PCB, maximizing performance while maintaining system stability.Dragon LAN 2.5 Gb/sThe intelligent 2.5 Gb/s LAN ensures maximum connection speeds to meet the needs of even the most demanding home network users, content creators, online gamers, and high-quality streamers. Speed up your network connection by 2.5 times over standard Gigabit Ethernet. Enjoy unparalleled speeds for gaming, file transfers, and backups.Beyond Fast USB TransferCreated for hardcore gamers and enthusiasts! The gaming Lightning ports connect to two dedicated controllers, allowing gamers to connect a high-speed keyboard/mouse and use them with the lowest possible latency, ensuring victory through top-tier performance!POLYCHROME RGBThis motherboard features built-in RGB headers and addressable RGB headers that allow you to connect the motherboard to compatible LED devices such as strips, CPU fans, coolers, cases, and more. Users can also synchronize RGB LED devices with

Uni-T UT663B BorescopeThe Uni-T UT663B is an industrial borescope designed for use in complex spaces that are beyond the reach of the human eye. The device was created for inspections in narrow, curved, and hard-to-reach areas where precise inspection is essential without the need to disassemble components. The model is equipped with a camera featuring 180° bidirectional rotation, a 5.0" screen, and a 1-meter cable, which facilitates inspections in more demanding conditions.Better visibility and greater image controlThe borescope features a 5.0" screen, supports 1920 x 1080 resolution photos, and records video in 1920 x 1080 AVI format, allowing you to conveniently document the inspection process. The 8 mm diameter camera with a CMOS sensor provides a 70° field of view and a depth of field of 20–100 mm, helping you closely observe the inspected components. Available features also include photo capture, video recording, playback, image rotation, audio recording, and high-temperature alerts.Rotating head and operation in hard-to-reach areasThe most important feature of the UT663B model is its rotating head with a 180° bidirectional range, which allows you to avoid blind spots and adjust the viewing angle more conveniently. A rigid 1-meter metal cable extends the operating range and makes it easier to reach deeper spaces. This solution is particularly effective where standard borescopes have limited maneuverability.Durable construction and documentation-readyThe camera meets the IP67 standard, and 8 LEDs with 4-step brightness adjustment improve visibility in dark interiors of devices and installations. The device uses a 3.7 V / 3000 mAh battery, which provides up to 4 hours of operation, and a standard 32 GB TF card allows you to save photos and videos immediately. It is a practical tool for technical, maintenance, and diagnostic inspections where ease of use and the ability to record results are essential.Included Industrial borescope with 360° rotating head Type-C cable Box Fabric case 32GB TF card User manual Specifications Manufacturer Uni-T Model UT663B Type Industrial borescope Screen size 5.0" System languages English, Simplified Chinese, Traditional Chinese, Japanese, German, Spanish, French, Italian, Korean Photo resolution JPG 1920 x 1080 Video resolution AVI 1920 x 1080 Basic functions Photo capture, video recording, playback, high-temperature protection, image rotation, audio recording Storage 32GB TF card Maximum storage capacity 64GB Rotation angle 180° bidirectional Cable material Metal, rigid Cable length 1m Lens diameter 8mm Light sensor CMOS Field of view 70° Depth of field 20 ~ 100mm LED light adjustment 4 settings Number of LEDs 8 Camera resolution 1000K Protection rating IP67 Battery 3.7V / 3000mAh Operating time 4h Lens temperature 0°C ~ 80°C Operating temperature 0°C ~ 45°C Operating humidity

Full Tower CTE C750 TG ARGB case The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, motherboard side and rear of the case. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for Centralized Thermal Efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE C750 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE C750 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. We provide cooling performance beyond your imagination! The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, rear and motherboard side. Its dual-chamber design allows users to showcase key components and provides plenty of space for excellent cooling solutions, with the ability to accommodate up to 14 fans inside the case thanks to front, bottom and rear fan brackets and a top and side M/B vent. It also has lots of little details like swivel PCI-E slots, removable filters, a pump and tank bracket, and Velcro straps for easy cable management. Whether you're looking for a case for custom liquid cooling or a dual AIO setup, the CTE C750 TG ARGB is a high-end presentation case that allows you to imagine something outside the box. Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE C750 TG ARGB's versatile interior includes two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Maximum radiator support - up to 360mm/420mm radiators in multiple locations Our CTE C750 TG ARGB offers excellent cooling support for custom liquid cooling enthusiasts, there are various support locations and enough space to arrange your own configurations. Up to 5 radiators (three 360mm and two 240mm) can be mounted simultaneously on our CTE C750, providing incredible radiator support. To ensure AIO compatibility, radiators up to 420 mm/360 mm in diameter can be installed on the front, rear and motherboard side, giving PC enthusiasts unlimited possibilities for the perfect configuration. All your dream cooling components will fit! The CTE C750 Full Tower case has a huge fan and cooler installation capacity: up to fourteen 140 mm fans and 360 mm/420 mm AIO coolers in various locations. Moreover, equipped fan brackets at the front, bottom and rear ensure easy installation of all desired cooling components. Amaze your world with three pre-installed 140 mm CT140 ARGB fans The CTE C750 TG ARGB Full Tower case is equipped with three 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be m

AOCHUAN S3 Gimbal with Additional Screen (Black)The AOCHUAN S3 is an advanced 3-axis gimbal for smartphones ranging from 52 to 87 mm in width and up to 12 mm in thickness, equipped with an additional touchscreen, a dual AI system, and a built-in 150-lumen LED light. The stabilizer offers 360° automatic tracking, gesture control, focus and zoom adjustment, and five operating modes: PF, F, POV, DM, and GO. The built-in aluminum telescopic arm, extending up to 128 mm, makes it easy to take selfies and wider shots, while the 2550 mAh (7.2 V) battery provides up to 10 hours of standby time or up to 6.4 hours with the light in full use. When folded, the device measures 155 × 61 × 305 mm, allowing it to be conveniently stored in the included protective case.Smooth, shake-free footageProfessional 3-axis stabilization effectively reduces shake while walking, recording on the move, or capturing dynamic shots. This makes videos smoother and more natural-looking without the need for additional editing. The pan axis rotates a full 360°, the tilt axis offers 310°, and the roll axis 90°, providing great freedom in framing. The maximum load capacity of up to 500 g applies when the arm is not extended, allowing you to safely use most modern smartphones.Smart Tracking and Touchless ControlThe AOCHUAN S3 is equipped with an AI system featuring front and rear cameras that automatically recognizes and tracks a face or selected object. The 360° tracking feature is ideal for vlogs, live streams, recording workouts, and creating content for social media. Gesture control lets you start or stop tracking without having to approach the device. This feature is especially useful for solo creators.Touchscreen and precise controlAn additional touchscreen provides quick access to stabilizer settings and convenient switching between operating modes. This keeps the most important functions always at your fingertips, without needing to reach for your phone. The gimbal also offers smooth focus and zoom adjustment, giving you greater control over your shot composition. Intuitive operation makes the device convenient for both beginners and more advanced users.Built-in LED light and telescopic armThe integrated LED light, with a brightness of 150 lumens and a color temperature of 6000 K, improves the quality of recordings made after dark or indoors. The additional light helps illuminate the face better and maintain a clear image without the need for separate accessories.Long battery life and ready-to-use kitThe 2550 mAh battery charges in about 3 hours using a 5 V / 2 A power source. The device operates in a wide temperature range from -10°C to 55°C, making it suitable for both indoor and outdoor recording. Weighing 562.5 g without the tripod, it ensures a stable grip and comfortable handling. The kit includes a tripod, a hard case, and a set of cables, making it easy to transport and allowing you to start recording immediately after unboxing.Included AOCHUAN S3 Gimbal Tripod Protective case USB-C to USB-C cable USB-A to USB-C cable User manual Manufacturer AOCHUAN Model S3 Type 3-axis smartphone gimbal Color black Compatible phone width 52–87 mm Maximum phone thickness up to 12 mm Load capacity up to 500 g (without extension arm) Panoramic rotation range 360° Tilt range 310° Rotation range 90° Operating modes PF / F / POV / DM / GO AI tracking 360° Gesture control Yes Touchscreen Yes Focus and zoom adjustment Yes Built-in LED light 150 lm Light color temperature 6000 K Battery Li-ion 7.2 V / 2550 mAh Operating time Up to 10 hours in standby mode Operating time with light at maximum brightness up to 6.4 hours Charging time approximately 3 hours Weight 562.5 g (without tripod) Dimensions when unfolded 127 × 114 × 288 mm Dimensions when folded 155 × 61 × 305 mm

MERACH MR-2440G1 vibration platform (gray)The MERACH MR-2440G1 vibration platform (gray) is a modern home training center that combines 200 W of power, 13 mm vibration amplitude, a wide 72 cm platform, a load capacity of up to 200 kg, and smart Auto On/Off and Bluetooth functions. The stable construction with a non-slip surface, clear LED display, shock absorption, and built-in speaker allow you to train effectively, safely, and comfortably—exactly the way you like. This compact device activates deep muscle groups and helps you achieve visible results faster without leaving your home.Full control thanks to smart start and pauseThe MERACH MR-2440G1 is equipped with a built-in gravity sensor that automatically starts the device when you step on the platform and gently move side to side. When you step off the device, it goes into pause mode after 30 seconds and automatically turns off after 10 minutes. This is not only convenient, but also saves energy and ensures safe use.Customize your workout with three noticeable intensity levelsDifferent foot settings allow you to adjust the intensity of the vibrations. A narrower setting provides gentler vibrations ("Walking - Relax" mode), a wider setting increases their power ("Running - Strong" mode), and the intermediate position offers a comfortable "Jogging - Comfortable" workout. This allows you to move freely from a relaxing session after work to intense muscle activation - without changing equipment.Deep muscle activation with 200 W of power and 13 mm amplitudeAt the heart of the device is a powerful 200 W motor that generates vibrations with an amplitude of 13 mm. These parameters translate into deep muscle stimulation – even those that are difficult to reach during classic training. The result? Better muscle tone, improved circulation, support for body shaping, and greater effectiveness of every minute of exercise.Stability and safety – train confidently, without worryThe platform has been designed for maximum stability. Non-slip suction cups prevent the device from moving, and the shock-absorbing design reduces shocks and vibrations transmitted to the floor. The wide surface (72 × 38 cm) ensures comfort even for people with a larger body build, and the maximum load capacity of 200 kg allows you to train without restrictions.User-friendly surface and clear displayThe soft, skin-friendly silicone mat increases grip and comfort during exercise, even when barefoot. The centrally located LED display allows you to monitor the time and operating mode in real time. Everything is intuitive and clear, so you can focus solely on your workout.Training with music – built-in BluetoothThe built-in Bluetooth module (2.4 GHz) allows you to connect the platform to your smartphone and play your favorite music while exercising. Training becomes a pleasure, and the rhythm helps you stay motivated. It's a detail that really affects your regularity and commitment.Included: MERACH MR-2440G1 vibration platform x1 Remote control x1 AAA batteries for remote control x2 Rubber stopper x1 Power cord x1 User manual x1 Manufacturer MERACH Model MR-2440G1 Rated power 200 W Vibration amplitude 13 mm Maximum load 200 kg (440 lbs) Device dimensions 72 × 38 × 16 cm (720 × 380 × 160 mm) Net weight 10.5 kg (23 lbs) Platform width 72 cm Power supply 220–240 V ~ 50/60 Hz Display LED Wireless connectivity Bluetooth

UNLEASH YOUR POTENTIALDominate with the Q27G4XF 27" QHD monitor with crystal-clear 2560 x 1440 resolution, HDR10, and an incredibly smooth 180 Hz refresh rate.QHD ResolutionWith a resolution of 2560 x 1440 pixels, Quad HD (QHD) delivers the highest image quality, sharpness, and a high level of detail. The widescreen 16:9 aspect ratio provides ample space for both office applications and entertainment such as games and movies.1ms GTG Response Time - Gray-to-GrayGtG stands for Gray-to-Gray and measures how long it takes a pixel to transition from one level of gray to another. In games, every millisecond counts; it can make the difference between a successful shot and a missed shot. A fast response time also eliminates ghosting and blurring. Motion180Hz Refresh RateCompetitive and intense gaming requires the best technology to deliver smoother, lag-free gameplay. The AOC AGON monitor features a 180Hz refresh rate, making it 3x faster than a standard display. Lower frame rates can cause enemies to appear to jump from one place to another on the screen, making them very difficult targets to hit. The 180Hz frame rate restores critical missing images back to the screen, revealing enemy movements in incredibly smooth motion, making targeting easier. With this AOC AGON gaming monitor, you won't have to endure input lag and screen tearing.Experience the game to the fullest with HDR10HDR10 is here to further enhance image quality by improving the synchronization between your graphics card or console and the monitor. This creates a more realistic, immersive, and fluid gaming experience: You'll feel like you're entering the game, frame by frame. Frame RateLow Input LatencyUnleash your reflexes by switching to AOC Low Latency Mode. Forget about graphical frills: this mode switches your monitor to settings that prioritize pure response time, providing a decisive advantage in close battles where split-seconds are crucial.Adaptive SyncAdaptive Sync technology synchronizes the monitor's vertical refresh rate with the frame rate of your graphics card, delivering even smoother gameplay by eliminating screen tearing, dropped frames, and choppy motion. This feature is also useful when watching movies and other moving images, providing a smoother display.0.5ms MPRT - Moving Picture Response TimeMPRT stands for Moving Picture Response Time. MPRT technology turns the monitor's backlight on and off as the image changes. By reducing the time a frame is displayed on the monitor, ghosting and blur are reduced, providing a smoother, more fluid gaming experience.WIDE RANGE COLORSWhen viewing photos, videos, or playing games, we want the image on your screen to be as close to reality as possible. That's why this screen is equipped with wide color gamut technology, allowing it to display many more colors than conventional monitors. This is achieved through a dedicated hardware solution, rather than software-based adjustments. The result: realistic and detailed images thanks to a wider color palette.Height-Adjustable StandWe care about your well-being. That's why this monitor offers height adjustment options that allow you to achieve the perfect posture while working, playing, or watching movies. Adjusting your AOC monitor to your needs not only helps reduce fatigue and maintain health. Ultimately, it also allows you and your team to perform better, regardless of the type of work.Esports Monitor StandOur new stand. Co-designed with esports professionals, it allows you to maximize the available space for all your peripherals. The monitor stand is designed to reduce the monitor's desk space and even allows you to place it on your desk. The keyboard is on top. The stand includes cable management to keep your desk tidy. No matter what genre you compete in, we want you to feel like a pro.GMENUAOC's G Menu is a free tool that you can install on your computer to enjoy complete customization combined with maximum convenience.

The Dell Pro 24 Monitor P2426H is a 23.8” Full HD monitor designed to improve productivity, connectivity and visual comfort in modern work environments. The monitor features an IPS panel, a 120Hz refresh rate and enhanced ComfortView Plus technology, delivering smoother motion, reduced eye strain and consistent image quality throughout the workday. Certified with TÜV Rheinland 4-Star Eye Comfort, the monitor utilizes a hardware-based low blue light solution that reduces harmful blue light emissions to ?35% while maintaining accurate and vibrant colors with 99% sRGB coverage. The IPS panel provides wide 178° viewing angles and a 1500:1 contrast ratio for deeper blacks and improved image clarity. The monitor offers versatile connectivity with DisplayPort 1.4, HDMI and a USB hub. Two front-facing USB-C quick-access ports support up to 15W charging, making it easy to connect and power accessories. Dell Display and Peripheral Manager software further enhances productivity through advanced multitasking and device management features. The ergonomic stand supports height adjustment, tilt, swivel and pivot functions, allowing users to create an optimal working position. The ultra-thin bezel design also makes the monitor ideal for multi-display setups. The Dell Premium Panel Exchange allows a free monitor replacement during the warranty period, even if only a single bright pixel is detected. The monitor also includes a 3-Year Advanced Exchange Service, ensuring that a replacement unit is shipped the next business day if required. Panel: 23.8" IPS panel with LED backlight (anti-glare, 3H hard coating) Resolution: 1920 x 1080 (Full HD) at up to 120Hz Aspect Ratio: 16:9 Brightness: 300 cd/m² (typical) Contrast Ratio: 1500:1 (typical) Response Time: 5 ms (Fast), 8 ms (Normal) Viewing Angles: 178° / 178° Color Gamut: 99% sRGB, 99% BT.709 Color Depth: 16.7 million colors 8-bit (6-bit + FRC) TÜV Rheinland 4-Star Eye Comfort Certification ComfortView Plus hardware low blue light technology Flicker Free technology Connectivity: 1 x HDMI 1.4 (1920 x 1080 @ 120Hz) 1 x DisplayPort 1.4 (HDCP 1.4) 1 x USB Type-B 5Gbps upstream 2 x USB Type-A 5Gbps downstream 2 x USB-C 5Gbps downstream (up to 15W charging) Adjustments / Installation: Height adjustment: up to 150 mm Tilt: -5° to +21° Swivel: -45° to +45° Pivot: -90° to +90° Security lock slot (Kensington compatible) VESA mount compatible (100 x 100 mm) Environmental Standards: ENERGY STAR® 8.0 certified EPEAT Gold with Climate+ TCO Certified 10 TCO Certified Edge RoHS compliant BFR/PVC-free monitor (excluding external cables) Arsenic-free glass and mercury-free panel Made with recycled materials including up to 95% recycled plastic, 100% recycled aluminum, up to 80% recycled steel and up to 20% recycled glass Dimensions and Weight: Dimensions with stand (W x H x D): 538.64 x 496.53 x 181.75 mm (maximum height) Weight with stand: 4.87 kg Weight without stand: 2.96 kg Included Cables: 1 x Power cable 1 x DisplayPort to DisplayPort cable (1.8 m) 1 x USB Type-A to Type-B upstream cable (1.8 m) 1 x HDMI cable (1.8 m, selected countries only) Warranty: 3-Year Advanced Exchange Service with Premium Panel Exchange warranty.

Abus Taipan LED helmet: freedom, ventilation and visibility for your gravel adventures The Abus Taipan LED is a helmet designed to deliver maximum performance and comfort on gravel routes and demanding cycling. It combines advanced ventilation, precise fit and an integrated rear light to enhance visibility, all in a lightweight design created for long days in the saddle. Helmet type: Gravel / cycling Construction: In-Mold with polycarbonate (PC) shell and EPS core Ventilation: 18 vents with internal airflow system Fit: Zoom™ Spin system with rear dial Straps: Aerodynamic Flow Straps™ Lighting: Magnetic, rechargeable rear LED light (USB-C) Light modes: Steady, Power, Pulse and Flash Battery life: From 4.3 h (Power) up to 35 h (Flash) Charging time: Approximately 1.5 hours Protection: IP44 certification (resistant to splashes and particles) Special features: Glasses holder, compatible with long hairstyles, washable floating padding and reflective details

Bluetooth party speaker 400 W maximum output power (2 x 20 W RMS) 2 x 8" woofers + 1" tweeter Signal/noise ratio: >=70dB USB/MicroSD card slot for direct MP3 format Microphone input AUX input TWS function (pair two speakers) Built-in rechargeable battery (4500 mAh) LED light function in the front - 10 versions with 7 different colors Screen with red light 230V/9V AC/DC adapter included Size: 26.00 (W) x 28.00 (D) x 58.50 (H)

The SBOX MD-722 single-motor desk offers smooth electric height adjustment and can withstand up to 80 kg. Made of steel, aluminum and plastic, this sleek matte black table frame is durable and stylish. The dimensions of 106 x 57 x 71-116 cm fit desktops of various sizes, making it perfect for any workplace. Easy to install, it provides ergonomic flexibility and a modern design for a productive and comfortable environment. Type computer Desktop size (mm) 1200-1800 Workbench material Wood, MDF, laminate Height (mm) 710 - 1180 Material for legs Steel Height adjustment electric LED lighting No Maximum load (kg) 80 Color Black Weight (kg) 29 Warranty -

Neewer MS150B Bi Color 130W 2700-6500K LED Lamp.The 130W Neewer MS150B LED lamp provides bi-color continuous illumination and allows you to adjust the color temperature from 2700K to 6500K. It also guarantees a maximum brightness of 200,000 lux at a distance of 0.5 meters. In doing so, it offers 12 special effects and high CRI97+ and TLCI98+ ratings for vivid colors and realistic scenes. The lighting is balanced - forget the flicker problem!Dimming technology and cooling systemThe MS150B uses PWM technology to adjust brightness from 0 to 100% with 1% accuracy. This makes it possible to precisely adjust the brightness level even in dimly lit conditions. The lamp features 4 smart heat dissipation modes - smart, high speed, low speed and OFF, ensuring cooling without affecting performance.Control via app and 2.4GThanks to NEEWER Infinity technology, the MS150B can be controlled via a mobile app, offering control over hundreds of lamps and the ability to update firmware via OTA. The 2.4G connection allows group control of lamps within a radius of up to 15m using 00-99 channels via remote control. There are also knobs and buttons to adjust the lights.Various power sourcesThe Neewer unit can be powered by 2 rechargeable batteries (NP-F750/NP-F970), a V-mount (14.4V), and a D-Tap cable for field use. The power adapter allows you to plug into a power outlet for maximum lighting performance. Note: batteries and D-Tap cable are not part of the kit.Bowens mount for light modificationWith the NEEWER mount with umbrella holder, you can connect softboxes, photo umbrellas and various light modifiers. The included Bowens mount adapter further expands compatibility with accessories.Additional amenitiesThe lamp is made of durable aluminum alloy, and with a removable handle that swivels 180°, you can easily store it. The unit weighs just 0.98 kg - you don't have to worry about it being an unnecessary burden. In addition, the LCD screen allows you to conveniently check the current settings.Included: NEEWER MS150B LED lamp NEEWER standard reflector Bowens mount adapter Umbrella holder Power adapter Manufacturer Neewer Model MS150B Power 130W Color temperature 2700K-6500K Brightness Maximum 200000 lux at 0.5 m CRI 97+ TLCI index 98+ Special effects 12 Weight 980 g Dimensions 19.5 x 9.5 x 8 cm Power supply NP-F750/NP-F970 batteries, V-mount battery, D-Tap cable Control Mobile app, 2.4G connection

AnyCubic Wash & Cure 3 Plus Print Cleaning and Drying DeviceWash & Cure 3 Plus is a reliable washing and drying device that will allow you to take care of the proper finishing and curing of your prints. It features a large design that will easily accommodate even larger models. It is also distinguished by surprisingly quiet operation. You can also choose from different operating modes and manually adjust the cleaning or curing time.Larger capacityThe product will allow you to easily clean even larger prints. The capacity of its basket is as much as 7.6 liters, and the total capacity of the cleaning module is as much as 12 liters. This is enough to accommodate models of different sizes! On the other hand, the dimensions of the curing area are ø220 x 260 mm.Reliable curingThanks to its carefully thought-out design and improved LED arrangement, the device guarantees excellent, even curing results. What's more, the set includes an innovative UV lamp with a bendable design, which provides an energy level of 30,000 μW/cm2 and a radiation range of 1-3 cm. With its help, you can, for example, cure the details of your models.Improved basket designThe device's basket is made of rust-resistant double-layer PP plastic, and it allows you to clean models placed on the platform. You can also choose from 2 available heights - 150 mm and 250 mm. This makes it easy to adjust the product to the size of your print and ensures maximum IPA efficiency - you only use as much as you actually need!Cure more models at the same timeYou'll also have a two-layer curing platform at your disposal so you can dry more models at the same time. This will save you time and avoid unnecessary use of the device!Easy operationThe device offers 3 modes to choose from - cleaning, curing, and FlexiCure enhanced curing using the included UV lamp. You can also manually adjust the cleaning or drying time between 1-30 minutes. Convenient operation of the Wash & Cure 3 Plus model is enabled by a built-in touch panel.Quiet operationDon't worry that the noise generated by the device will interfere with your work or rest. The sealed design and optimized software of the Wash & Cure 3 Plus makes its volume level only about 65 dB. So you can enjoy peace of mind!Included Device for washing and drying prints Cleaning module Cleaning basket Stick x4 Curing table UV lamp with bendable design Allen wrench set Power supply User manual Manufacturer AnyCubic Model WS3LA0WH-Y-O UV light source 14 diodes 405 nm + lamp with adjustable design Operation modes Cleaning, curing, FlexiCure Rated power 36 W Input voltage 100-240 V 50/60 Hz Cleaning / curing time adjustment 1-30 min Max. dimensions of the model to be cured ø220 x 260 mm Max. dimensions of the model to be cleaned With platform: 228 x 128 x 250 mm; Without platform: 228 x 128 x 260 mm; Control panel Touch buttons Material (cleaning basket, cleaning module, curing table) PP UV lamp height 380 mm Dimensions 312 x 267 x 434 mm Weight 5.7 kg

Neewer MS60C RGB LED LightThe NEEWER MS60C RGB combines high power (65W), advanced RGBWW color mixing, and a compact design, making it ideal for both studio and outdoor shoots. A wide color temperature range, extensive lighting modes, and as many as 17 special effects allow you to tailor the light to any scene. The lightweight aluminum housing, wireless control, and battery-powered operation give you great freedom to work regardless of the location.Precise light and natural color reproductionThe MS60C model uses RGBWW color mixing technology, which ensures highly accurate color reproduction and greater control over the character of the light. The color temperature, adjustable from 2700K to 6500K, allows for a smooth transition from warm, atmospheric lighting to cool daylight. A high CRI of 97+ and TLCI of 98+ ensure that colors appear natural in both photos and video recordings. The light offers a maximum light intensity of up to 41,000 lux at 0.5 m with a reflector (4400K), and thanks to PWM technology, it allows for smooth dimming from 0 to 100% with 1% precision.Designed for studio and on-location workIts compact form and light weight make the MS60C ideal for mobile shoots. The aluminum housing increases the durability of the construction, and the entire unit weighs only about 700 g with dimensions of 150 × 95 × 92 mm, so the light doesn’t take up much space in a camera bag. The detachable mount, adjustable within a 180° range, makes it easy to position the light at the right angle during recordings, live broadcasts, or photo shoots. A quiet fan effectively cools the device without disrupting work on set.Extensive RGB modes and creative lighting effectsThe NEEWER MS60C offers four operating modes (CCT, HSI, RGBCW, and FX). This allows you to quickly adjust the light’s character to a specific scene or create more creative visual effects. RGBCW mode lets you independently adjust the red, green, blue, and warm/cool white components, offering vast possibilities for setting the mood of your shot. A color angle range of 0–360°, saturation adjustment from 0 to 100%, and GM correction from -50 to +50 help you reproduce natural light even more accurately or create entirely original color compositions. Users also have access to 17 preset special effects useful for producing dynamic video content.Convenient control and synchronization of multiple lightsThe light can be operated directly via buttons on the housing or remotely using the NEEWER app. The Infinity system allows for simultaneous control of multiple lights and OTA software updates, making it easier to manage larger lighting setups. The built-in 2.4G system supports operation on channels 00–99 at a distance of up to 20 meters, allowing multiple devices set to the same channel to be synchronized simultaneously. This solution is particularly useful during extensive photo shoots, studio recordings, or live broadcasts.Flexible Power OptionsThe MS60C is designed for both stationary and mobile use. The included battery plate allows the light to be powered by one or two batteries, increasing convenience when working outside the studio. The model is compatible with NP-F750 and NP-F970 batteries and can also be powered by a 14.4V V-Mount battery using a D-Tap cable. The kit also includes an AC adapter for continuous operation when plugged into an electrical outlet. An additional advantage is the included Bowens mounting adapter, which allows you to use a wide range of light modifiers.Included MS60C LED light Reflector Handle Power cable Power adapter Battery plate Battery cable V-Mount battery adapter plate Bowens mounting adapter User manual Manufacturer Neewer Model MS60C Weight 700 g Battery type NP-F750/F970 Power source AC power adapter, AC power Input voltage 100–240 V DC output 19.6 V/4 A Dimming range 0–100% Color temperature 2700 K–6500 K Channels 00–99 CRI 97+ Power 65 W Illuminance 41,000 lx/0.5 m, 8,300 lx/m Frequency 1–10 Number of special effects 17 GM values -50/+50 Col

Hohem iSteady M6 Kit GimbalThe Hohem iSteady M6 Kit Gimbal is a versatile tool for anyone who wants to create professional videos with excellent stabilization and creative effects. With advanced technology, intuitive operation and long battery life, the iSteady M6 is an ideal choice for content creators, vloggers and streamers. Its rugged construction, ergonomic design and expandability with additional accessories make it an indispensable accessory in any creator's arsenal.Reliable 3-axis stabilization for content creatorsThe Hohem iSteady M6 Kit is an advanced 3-axis gimbal designed for vloggers, streamers, travelers and filmmakers. With the ability to move freely within 335 degrees and infinite 360-degree rotation, the gimbal offers full flexibility to record from different angles and perspectives. The improved 3-axis design with iSteady 7.0 anti-shake system ensures smooth and stable shots, even during intense physical activities such as running or walking.Smart tracking and creative capabilitiesThe Hohem iSteady M6 Kit is equipped with a magnetic fill light, integrated with a smart video sensor, which enables face tracking both day and night. This solution is ideal for live recording and creating content for social media, ensuring that you always remain in the center of the frame. The gimbal supports a variety of modes, such as sports mode, inception mode, dolly zoom, time-lapse mode and more, allowing you to realize creative ideas without the need for additional apps or Bluetooth.High performance and versatilityWith a maximum load capacity of up to 400g, the Hohem iSteady M6 gimbal easily holds larger smartphones, ensuring stability and reliability. The 0.91" OLED display makes it easy to monitor various parameters such as battery status, gimbal modes and Bluetooth functions. The built-in high-capacity battery provides up to 18 hours of continuous operation, and reverse charging support allows you to charge your smartphone while recording video, eliminating the problem of low power levels.Ergonomic design and versatile featuresThe iSteady M6 gimbal features an ergonomic grip with a non-slip texture that provides a secure grip and comfort during prolonged use. The roll axis arm is equipped with accurate balancing weights to help perfectly balance the smartphone. The gimbal can be turned on independently of the phone's position, making it easy to capture an unobstructed view when the screen is facing the roll motor.Multiple expansion optionsWith four 1/4"-20 UNC ports, the Hohem iSteady M6 Kit allows you to connect a variety of accessories such as microphones, LED lights or additional grips, unlocking the full creative potential of this device. Intuitive A-B motion buttons and a multi-function trigger allow you to take time-lapse shots on the move, and activate modes such as ultra-wide-angle and sports, making the gimbal the perfect tool for any film production.Included magnetic flash gimbal USB-C cable charging cable storage bag stand user manual Manufacturer Hohem Model iSteady M6 Kit Material high quality composite materials Stabilization algorithm iSteady 7.0 Display 0.91 inches Weight (including battery) 551g gimbal, 23.8 magnetic light Distance of intelligent gesture recognition 3.5m Color temperature 2700K, 3000K, 3500K, 4000K, 4500K, 5000K, 5500K, 6000K, 6500K RGB 360 kinds of color change Magnetic lamp power 1W Magnetic lamp voltage 5.0V Battery capacity 2600 mAh Input 5V-2A Charging time 3 hours Battery life 18 hours (6-8 hours, while smart tracking is enabled and with the light on maximum brightness) Angle range 360° in panorama mode, rotation 335°, tilt 335° Operating temperature range -10 to 45 °C Maximum load 400g Maximum width of phones 58-98mm Operating time 18h Ports 1/4"-20 UNC 4x

The Newell Air 1100 RGB BD APP LED lamp is a versatile light source measuring 38.4 cm x 27.4 cm. With a maximum power of 50 watts and a light output of up to 1800 lumens, it guarantees versatility in film and photography. The lamp offers up to 360 colors of light, giving you full control over saturation and brightness. Adjustable CCT (from 2500 to 8500 K) allows you to fine-tune the lighting conditions.