MIDI USB

Darkflash DB330M Mesh computer case (black)Darkflash DB330M Mesh is a computer case designed for M-ATX and ITX standard motherboards. Its dimensions (368 × 218 × 400 mm) allow the construction of a compact set-up with a graphics card up to 305 mm long and CPU cooling up to 180 mm high. The design is based on a 0.5 mm SPCC steel frame and features a tempered glass panel and mesh front for efficient air or liquid cooling.Efficient air coolingThe Darkflash DB330M Mesh case supports up to 7 fans: 2 at the front, 2 at the bottom, 2 at the top and one at the rear. The top part of the design allows for the installation of fans in 120 or 140 mm sizes, while the remaining locations are provided for 120 mm fans only. This arrangement allows for the creation of a vertical cooling channel that promotes natural air circulation and efficiently dissipates heat from components.240 mm liquid coolingThe Darkflash DB330M Mesh allows you to mount a water cooler of up to 240 mm in the top. This allows you to install a high-performance AIO system without sacrificing other components. The maximum height of the air cooler is 180 mm.Mesh panel with filterThe front panel of the case is made of mesh, which improves airflow and also acts as a dust filter. Additional vents are also located on the top and bottom of the design.Space for longer GPUsA graphics card up to 305 mm in length can be mounted inside. The chassis offers 4 PCI slots, making it possible to mount two- and three-slot cards. The power supply compartment and cable space do not limit the length of the GPU.Glass side panelThe left panel is made of tempered glass to expose the computer's interior and components with RGB backlighting. The panel can be easily removed without tools.Separate space for cables and multiple portsThe back of the case features a contoured space and pass-through holes for orderly cable routing. This layout makes it easier to install components and improves airflow in the main compartment. The front panel features a USB 3.0 port, 2 USB 2.0 ports, one HD Audio port and a power button. This allows you to enjoy quick access to basic functions without having to reach the back of the case.ATX power supply compatibility and board supportThe bottom of the case has room for a standard ATX power supply. This makes it possible to mount full-power units without the space constraints typical of smaller enclosures. In addition, the Darkflash DB330M Mesh supports M-ATX and ITX motherboards, offering optimal conditions for building a home, office or gaming PC. The lack of pre-installed fans allows for individual selection of cooling components. Manufacturer Darkflash Model DB330M Mesh Black Housing type Midi Tower Side panel Tempered glass Motherboard standard M-ATX, ITX Power supply standard At the bottom Slots for internal drives 3.5" HDD x2, 2.5" SSD x1 Expansion card slots 4 Max PSU length 210 mm Max length of graphics card 305 mm Max height of CPU cooler 180 mm Max number of fans 7 Fan mounting options Top: 120 mm x2 / 140 mm x2; Bottom: 120 mm x2; Front: 120 mm x2; Rear: 120 mm x1 Water cooling mounting options Top: 240 mm Number of fans installed No fans installed Type of fans No fans installed Buttons and controls Power Connectors USB 3.0 x1, USB 2.0 x2, HD Audio Material 0.5 mm SPCC Color Black Height 400 mm Width 218 mm Depth 368 mm Weight 3.8 kg

Darkflash DB330M Mesh computer case (white)Darkflash DB330M Mesh is a computer case designed for M-ATX and ITX standard motherboards. Its dimensions (368 × 218 × 400 mm) allow the construction of a compact set-up with a graphics card up to 305 mm long and CPU cooling up to 180 mm high. The design is based on a 0.5 mm SPCC steel frame and features a tempered glass panel and mesh front for efficient air or liquid cooling.Efficient air coolingThe Darkflash DB330M Mesh case supports up to 7 fans: 2 at the front, 2 at the bottom, 2 at the top and one at the rear. The top part of the design allows for the installation of fans in 120 or 140 mm sizes, while the remaining locations are provided for 120 mm fans only. This arrangement allows for the creation of a vertical cooling channel that promotes natural air circulation and efficiently dissipates heat from components.240 mm liquid coolingThe Darkflash DB330M Mesh allows you to mount a water cooler of up to 240 mm in the top. This allows you to install a high-performance AIO system without sacrificing other components. The maximum height of the air cooler is 180 mm.Mesh panel with filterThe front panel of the case is made of mesh, which improves airflow and also acts as a dust filter. Additional vents are also located on the top and bottom of the design.Space for longer GPUsA graphics card up to 305 mm in length can be mounted inside. The chassis offers 4 PCI slots, making it possible to mount two- and three-slot cards. The power supply compartment and cable space do not limit the length of the GPU.Glass side panelThe left panel is made of tempered glass to expose the computer's interior and components with RGB backlighting. The panel can be easily removed without tools.Separate space for cables and multiple portsThe back of the case features a contoured space and pass-through holes for orderly cable routing. This layout makes it easier to install components and improves airflow in the main compartment. The front panel features a USB 3.0 port, 2 USB 2.0 ports, one HD Audio port and a power button. This allows you to enjoy quick access to basic functions without having to reach the back of the case.ATX power supply compatibility and board supportThe bottom of the case has room for a standard ATX power supply. This makes it possible to mount full-power units without the space constraints typical of smaller enclosures. In addition, the Darkflash DB330M Mesh supports M-ATX and ITX motherboards, offering optimal conditions for building a home, office or gaming PC. The lack of pre-installed fans allows for individual selection of cooling components. Manufacturer Darkflash Model DB330M Mesh White Housing type Midi Tower Side panel Tempered glass Motherboard standard M-ATX, ITX Power supply standard At the bottom Slots for internal drives 3.5" HDD x2, 2.5" SSD x1 Expansion card slots 4 Max PSU length 210 mm Max length of graphics card 305 mm Max height of CPU cooler 180 mm Max number of fans 7 Fan mounting options Top: 120 mm x2 / 140 mm x2; Bottom: 120 mm x2; Front: 120 mm x2; Rear: 120 mm x1 Water cooling mounting options Top: 240 mm Number of fans installed No fans installed Type of fans No fans installed Buttons and controls Power Connectors USB 3.0 x1, USB 2.0 x2, HD Audio Material 0.5 mm SPCC Color White Height 400 mm Width 218 mm Depth 368 mm Weight 3.8 kg

Technical data Type: ATX Mid Tower Color black Material: Metal (0.5mm SPCC) / ABS Plastic (Front Panel) Power Supply: Above (not included in the package) MBO Compatibility: ATX Micro-ATX/ITX Extensions: 2 x external 5.25", 2 x internal 3.5", 2 x internal 2.5", 7 horizontal + 2 vertical Front panel: USB 2.0 x 2 + HD audio Fan mounting points: 2 x front 120mm (optional), 1 x rear 80/90mm (optional), 2 x side 120mm (optional) GPU Max length (mm): 310 CPU Max Height (mm): 148 Dimensions (mm): 358x191x417.5 Weight (g): 3100

Take your game to new levels with the officially licensed PowerA Advantage Plus Wired Controller for Xbox Series X|S. Featuring our patent pending Quick-Twist thumbsticks, you can easily adjust the height of the thumbsticks to 3 different positions with a simple twist. The Hall Effect Modules in the thumbsticks provide a more pro-level feel to help with precision and longevity. Plus, all the features you’d expect from an exceptional Xbox controller like, Mappable Advanced Gaming Buttons, Dual Rumble Motors, and more. Sit back in comfort with the included extra-long 3-meter. USB-C cable. With a wired connection, enjoy minimal input-lag and eliminate the need to charge batteries.This controller also works great on Windows 10/11. Key Features Quick-Twist Thumbsticks – Easily adjust the height for each thumbstick in the middle of a game with a simple twist: no need to swap out parts. 3 Height settings: Standard, Medium, Tall. Hall Effect Modules – Contact-free magnetic sensors in the thumbsticks provide a more fluid pro-level feel to help with precision and longevity Advanced Gaming Buttons – Get an edge over the competition with two mappable buttons you can program on-the-fly, mid-game—no system settings to configure Dual Rumble Motors - Take your gaming experience to the next level, providing tactile feedback and sensations that bring your virtual worlds to life Immersive Impulse Triggers – Provides reactive rumble sensations using built-in motors so you can feel the action of the game Extra-Long USB-C® Cable - Provides you with 3-meters (10ft). of distance for more comfort and flexibility than shorter cables Ergonomic Design – Lightweight and comfortable with a textured grip for long gaming sessions Smooth Controls – Precision-tuned analogue sticks and embedded anti-friction rings for superior controls Headset Compatible – Plug in your favourite 3.5 mm headset through the stereo headset jack Officially Licensed - for Xbox Series X|S and works on Xbox One and Windows 10/11 PowerA Gamer HQ App – Adjust audio, triggers, rumble, dead zones, and more on your controller with the free official Xbox and Windows 10/11 app

Type: ATX Mid Tower Meals: upstairs - not included MBO compatibility: ATX / Micro-ATX / ITX Extensions: 2 x external 5.25", 2 x internal 3.5", 4 x internal 2.5", 7 horizontal Front panel: 1x USB 3.0, 2x USB 2.0 + HD sound Fan mounting points: 1 x back 120mm (optional) GPU Max length (mm): 310 CPU Max Height (mm): 160 Material: metal Dimensions (mm): 330x185x410 Weight (g): 3000