Mini monitors

Shelly PM Mini Gen3 Set of 2 ControllersThe Shelly PM Mini Gen3 is the most compact energy meter on the market, designed to accurately monitor electricity consumption. Its miniature size allows for easy installation anywhere - behind a wall switch, electrical outlet or even inside home appliances. With a new processor and increased flash memory, the device offers high performance, faster operation and reliability. The Shelly PM Mini Gen3 does not require an additional hub, making it easy to integrate into an existing smart home system.Precise monitoring and enhanced functionalityShelly PM Mini Gen3 allows precise and real-time monitoring of energy consumption, which enables optimization of consumption and reduction of equipment operating costs. With free cloud storage, you can analyze energy consumption over time and make decisions to improve energy efficiency. The device supports up to 16 amps at 240 volts, making it powerful enough to monitor most home electrical appliances.Wide compatibility and easy installationThe Shelly PM Mini Gen3 is compatible with a number of automation platforms, such as Home Assistant, MQTT, and WebSocket. With support for scripts and webhooks, users can customize the operation of the device to their specific needs. Installation is simple and quick - it can be done in less than 10 minutes. In addition, the device can act as a Wi-Fi signal booster and Bluetooth gateway, which increases the range and stability of the network at home.IncludedShelly PM Mini Gen3 controller x 2User manual Manufacturer Shelly Model PMMiniGen3x2 Size: 29x34x16 mm Weight: 13 g Mounting: installation box Power supply: 110-240 VAC Maximum current: 16 A Maximum power: 3840 W Power consumption:

Mini PIR Alert Sensor Wireless Infrared GSM Alarm Monitor Motion Detector Detection Home Anti-theft System EU Plug

UNI-T UT118B digital multimeterUNI-T UT118B is a small but very practical digital multimeter that is ideal for quick measurements in electrical installations. Its slim design and intuitive operation make it a convenient tool for both professionals and those doing minor repairs at home.Comprehensive measurementsThe UT118B multimeter can measure direct current (DC) and alternating current (AC) voltages up to 300 V, which is sufficient for most basic service and installation tasks. With the ability to measure resistance up to 30 MΩ, you can easily check the condition of wires, fuses or soldered connections. Capacitance measurement up to 3 mF also allows quick verification of capacitors, which is sometimes useful for diagnosing power supplies or electronic circuits.Automatic parameter recognitionOne of the main advantages of the UT118B is its Auto function, which automatically recognizes the parameter being measured without having to manually switch ranges. This makes the device very easy to use and ideal for quick measurements in restricted areas or when working with one hand. In addition, the multimeter is equipped with a non-contact voltage detection (EF) function, which increases work safety.Easy-to-read display and practical measurement functionsThe UT118B offers an easy-to-read 28 × 14 mm LCD screen that makes it easy to read results even in low-light conditions. The "data hold" function allows you to hold the reading on the screen, and MAX/MIN modes allow you to monitor values in real time. In addition, the device automatically shuts off after about 10 minutes of inactivity to prevent unnecessary battery drain. A built-in low battery indicator reminds you when the battery needs to be replaced.Design ready to work in any conditionsWith its small size (20 mm × 27 mm × 182 mm) and weight of just 90 g, the UT118B will fit in a shirt pocket, tool bag or even a desk organizer. It is powered by a CR2032 battery, which lasts for many hours of use. It comes with basic accessories: a battery and a measuring cable - everything you need to get started right away.Included multimeter battery measuring cable Manufacturer UNI-T Model UT118B DC voltage measurement range Scan/Auto mode: 300 V ±1%+3 AC voltage measurement range Scan/Auto mode: 300 V ±1%+3 Resistance Scan mode: 3MΩ; Auto mode: 30MΩ ±(1%+3) Capacitance Scan mode: 300μF; Auto mode: 3mF ±(3%+5) Auto range Yes EF function Yes Diode Yes Automatic switch off after approx. 10 min Sound signal of continuity Yes Low battery indicator Yes Data storage Yes Max/Min Yes LCD backlighting Yes DCV input impedance ≥10MΩ Power supply 3V battery (CR2032) Display size 28 x 14 mm Weight 90 g Dimensions 20 x 27 x 182 mm

SmallRig 3513 Universāls ātrās noņemšanas komplekts Talon MiniĀtrās atbrīvošanas plate atbalsta ierīces ar 1/4"-20 vītni, piemēram, kameras, monitorus, būrus, montāžas plāksnes utt.Tās 1/4"-20 vītņu caurumi apakšā ļauj piestiprināt ierīces ar 1/4"-20 skrūvēm, piemēram, galda statīvus, lodveida galvas utt.To var vertikāli un stabili iestiprināt pamatplātnē, neradot deformācijas.Visu komplektu, kura maksimālā dinamiskā slodze ir 5 kg, ir viegli bloķēt un atbloķēt, lai uzņemtu vairākas fotografēšanas ainas.Iebūvēti gumijas spilventiņi, kas novērš izlieces un skrāpējumus.

Shelly 1 Mini Gen3 Set of 2 ControllersDiscover a new dimension of control in your home with the Shelly 1 Mini Gen3! This small, smart controller offers the ability to remotely control devices right from your smartphone, tablet, computer or home automation system. It is so small that it will fit into standard electrical boxes, outlets, light switches and other space-constrained areas. It is equipped with a more powerful processor and larger memory, resulting in more efficient operation.Maximum performance in a compact form factorThe Shelly 1 Mini Gen3 is an upgraded version of the popular Shelly Plus 1 Mini, equipped with an advanced processor and increased memory. This makes the device perform even faster and more reliably. Its compact size allows for easy installation in standard wall boxes, behind electrical outlets or light switches, even where space is limited.Full control over appliancesControlling appliances is now easier than ever! Turn your appliances on and off remotely, automate their operation and enjoy the convenience that Shelly 1 Mini Gen3 provides, no matter where you are - all you need is an Internet connection. The controller is also compatible with popular home automation platforms, including Amazon Alexa, Google Smart Home and Samsung SmartThings, so you can manage your appliances by voice!Expand the scope of your networkWith the Shelly 1 Mini Gen3, you can also extend the range of your Wi-Fi network for IoT devices. This device acts as a signal booster, picking up Wi-Fi signals and amplifying them to cover a larger area. This ensures that your IoT devices will always stay connected.Your remote control centerThe device supports both Wi-Fi and Bluetooth 4.2, which means it can easily integrate into your existing ecosystem. It also acts as a BLE gateway, allowing communication between Shelly BLU devices and the Shelly ecosystem. What's more, with the ability to monitor humidity and temperature with the Shelly 1 Mini Gen3, you have full control over the environment in your home. You can adjust the parameters to your preferences for maximum comfort.Integrated solutionsWith the ability to create advanced schedules, you can program your electrical appliances to operate exactly as you need them to. Let the lights turn on at a specific time of day and the heating adjust to your schedule - Shelly 1 Mini Gen3 is ready to meet your expectations.IncludedShelly 1 Mini Gen3 x2 Manufacturer Shelly Model 1 Mini Gen3 Power supply 110 - 240 VAC Relay Dry, NO (normally open) contact, 1-pole, micro contact Power consumption < 1.2 W External protection Circuit breaker characteristics B or C, max. 10 A rated current, min. 6 kA short-circuit current circuit breaker, energy limitation class 3 Max. switching voltage 240 VAC, 30 VDC Max. switching current 8 A/240 VAC, 5 A/30 VDC Max. output power 2000 W/240 VAC, 150 W/30 VDC Internal temperature sensor Yes Wi-Fi communication protocol 802.11 b/g/n Wi-Fi range Up to 30 m indoors and 50 m outdoors Bluetooth wireless communication protocol 4.2 Bluetooth range Up to 10 m indoors and 30 m outdoors CPU ESP-Shelly-C38F Flash 8 MB Schedules 20 Webhooks (URL Actions) 20 with 5 URLs per action Scripts Yes MQTT Yes UDP Yes Advanced scheduling Yes KVS Yes Dimensions 29x34x16 ±0.5 mm Weight 19 ±1 g Conductor cross section 0.2 to 2.5 mm² / 24 to 14 AWG (solid, stranded and bootlace type insulation terminations) Length of exposed conductor 6 to 7 mm Mounting In a wall box Housing material Plastic Ambient operating temperature -20 °C to 40 °C Humidity 30 % to 70 % RH Maximum altitude. 2000 m

SONOFF MINI-ZBDIM-E ZigBee smart wall switch/dimmerSONOFF MINI-ZBDIM-E is a smart switch operating in the ZigBee 3.0 standard, designed for smooth lighting control in the range of 0–100%. It allows you to create scenes, schedules, and monitor energy consumption. Thanks to the ZigBee router function, it not only controls the light, but also amplifies the signal throughout the smart home network, improving its stability.Stable ZigBee 3.0 communication and router roleThe device operates in the IEEE 802.15.4 (ZigBee 3.0) standard and acts as a router in the network. This means that it transmits the signal further, increasing the range and reliability of communication between devices. This is especially important in larger apartments and houses, where the signal has to pass through several rooms. The switch works with eWeLink gateways such as ZBBridge-P, ZBBridge-U, NSPanel Pro, and iHost. It can also be integrated with Home Assistant via ZHA or Zigbee2MQTT using SONOFF series dongles.Smooth dimming and comfort of useMINI-ZBDIM-E allows you to adjust the brightness in the full range from 0 to 100%, allowing you to precisely adjust the light to the situation. In addition, the trailing-edge dimming increases compatibility with modern light sources and reduces flickering. The device also supports automatic calibration, making it easier to adjust to a specific load.Wide lighting compatibilityThe dimmer works with various types of light sources. It supports dimmable LEDs up to 200 VA, traditional and halogen bulbs up to 400 W, and dimmable electronic transformers up to 200 W. This makes it suitable for use in most home lighting installations. Note: the product is not intended for fluorescent lamps, LED strips, or inductive loads such as fans.Energy consumption monitoringThe built-in power measurement function allows you to control the current energy consumption of the connected lighting. In the app, you can check the current operating parameters, which facilitates conscious energy management and adjustment of the brightness level to real needs.Scenes, schedules, and voice controlThe device allows you to create smart scenes and schedules that automatically adjust lighting to the time of day or other events in the system. You can set the lights to dim automatically in the evening or turn on at a specific time. Voice control is also possible using Amazon Alexa or Google Assistant, as well as remote management from the eWeLink app.Safety and durabilityThe device is equipped with protection against overheating, overload, and overcurrent. The housing is made of flame-retardant PC material, and the entire device complies with CE and RoHS standards. The relay used is designed for long and stable operation, which translates into greater reliability in everyday use.Standard installation and compact dimensionsThe dimmer is designed for use in 220-240 V ~ 50 Hz installations and requires a neutral wire. It fits 86-type boxes and European round boxes with a diameter of 60 mm. The compact design facilitates installation in both new installations and when upgrading existing equipment.Included in the set smart switch 4 screws user manual Manufacturer Sonoff Product name Orb-ZBDIM Model MINI-ZBDIM-E Housing material PC Wi-Fi Wi-Fi IEEE 802.15.4 Operating temperature -10°C~40°C Rated voltage 220–240 V ~ 50 Hz Rated power max. 400 W MCU EFR32MG21 LED 200VA Dimensions 86 x 86 mm ,

SONOFF MINI-DIM-E smart WiFi wall switch/dimmerSONOFF MINI-DIM-E smart switch with Matter over WiFi support. It allows you to smoothly adjust the brightness of your lighting, create scenes, and monitor energy consumption. It supports schedules, smart scenes, and voice control, so you can easily adjust your lighting to the time of day and your habits. Automatic calibration makes it easy to adjust to the connected load, and built-in protections against overheating and power surges increase operational safety.Smooth brightness adjustmentOrb-DIM allows you to adjust the brightness in the full range from 0 to 100%. You can precisely adjust the light to suit the situation – from soft night lighting to full power for working or reading. The preset function allows you to quickly set the desired level, speeding up everyday use. The use of trailing-edge dimming increases compatibility with modern light sources and reduces flickering.Wide compatibility with lightingThe switch works with various types of light sources. It supports dimmable LED bulbs up to 200 VA, traditional and halogen bulbs up to 400 W, and dimmable electronic transformers up to 200 W. This gives you freedom in choosing lamps without having to replace the entire installation. Note: the device is not intended for fluorescent lamps, LED strips, or inductive loads such as fans.Matter – one standard, many possibilitiesMINI-DIM-E operates on the Matter standard, allowing it to be integrated with popular systems such as Apple Home, Google Home, Amazon Alexa, SmartThings, and Home Assistant. This allows you to control your lighting from various apps and voice assistants in a single home. A compatible Matter hub is required to operate in the Matter ecosystem. Once connected, the device can be part of larger automations and scenes throughout the system.Perfect for the Apple ecosystemOrb-DIM is designed to work seamlessly with Apple Home. Brightness control, scene creation, and voice control via Siri are all done directly in the app, making setup and everyday use easy.Energy consumption monitoringThe built-in power measurement function allows you to check the current energy consumption of connected lighting. This allows you to consciously manage brightness and control energy costs, especially for heavily used light points.Schedules, scenes, and voice controlThe switch allows you to set schedules for turning lights on and off, create scenes tailored to the time of day, and use voice control. You can program the switch to turn on soft lighting in the living room in the evening, stronger lighting in the morning, or automatic dimming at a specific time. The eWeLink app allows for quick pairing, and with Matter, you can simply scan the configuration code to add the device to the system.Advanced security and universal installationThe device is equipped with overheating protection and surge protection. The housing is made of flame-retardant material and the whole device complies with CE and RoHS standards. The relay is designed for long and stable operation, which translates into greater reliability in everyday use. In addition, the MINI-DIM-E fits 86-type boxes and European 60 mm round boxes. This makes it suitable for both new installations and the modernization of existing equipment.Included in the set smart switch 4 screws user manual Manufacturer Sonoff Product name Orb-DIM Model MINI-DIM-E Housing material PC Wi-Fi Wi-Fi IEEE 802.11b/g/n 2.4 GHz Operating temperature -10°C~40°C Rated voltage 220–240 V ~ 50 Hz Rated power max. 400 W Dimensions 86 x 86 mm

Maono BA37 microphone holderThe Maono BA37 is a sturdy microphone holder that can withstand a load of up to 2.5 kg - up to 25% more than many similar models on the market. The steel construction with internal springs ensures stability and vibration dampening, which translates into greater recording comfort. The accessory is ideal for use with dynamic and condenser microphones, even those with heavier weights.Full freedom of adjustmentThe arm swivels 360° with additional adjustment points at 120°, 225° and 270°, allowing you to precisely position the microphone in a convenient position. The length of each arm is 35 cm. Internal springs ensure quiet and smooth operation when repositioning. Thanks to its refined design, the Maono BA37 can be placed very close to a wall or monitor, and you will save valuable desk space.Universal mounting and wide compatibilityThe improved C-clamp fits countertops up to 6 cm thick and provides a larger contact area (6.6 × 6.6 cm) for more stable mounting. A 3/8" to 5/8" metal adapter is included, making the mount compatible with many popular microphones. Manufacturer Maono Model BA37 Compatibility Maono PD400X, Maono PM450, Maono PD200X, Maono PD100X, Audio-Technica AT2020, Shure SM7B, Shure MV7, HyperX QuadCast, HyperX SoloCast, Razer Seiren Mini Maximum load capacity 2.5 kg Arm movement range 360° / 120° / 225° / 270° Arm length 2 × 35 cm Mounting type C-clamp (max. tabletop thickness: 6 cm)