Mini Printeris

Sunlu PLA+ Silk Filament (Pink)Sunlu PLA+ Silk is a filament designed for prints that impress with their precision while also making a stunning visual impact. It stands out with its striking, glossy, silky finish, making the finished models look incredibly elegant and eliminating the need for additional polishing after printing. It’s the perfect choice for artistic, decorative, and creative projects where you want to achieve a more luxurious, refined look.Smooth printing without unnecessary problemsThe filament is designed to ensure the most comfortable and stable operation possible. It feeds smoothly into the printer, reducing the risk of jams and nozzle clogging, which translates to smoother printing and fewer unnecessary interruptions. Low warping and minimal shrinkage help achieve aesthetically pleasing, even prints, even with more demanding models, making the entire process easier and more predictable.A convenient choice for beginners and advanced usersSunlu SILK PLA+ was developed with user-friendly and simple operation in mind, making it ideal for both those just starting their 3D printing journey and more experienced users. The filament offers excellent printability, and an added benefit is that it does not require a heated bed, which simplifies setup and enhances the printing experience. It’s a practical solution for anyone seeking impressive print results without sacrificing ease of use.High precision and broad compatibilityA major advantage of the filament is its dimensional accuracy of ±0.02 mm, which, combined with a uniform diameter, ensures stable material feeding and repeatable results. Low shrinkage and minimal diameter deviations support operational reliability, which is of great importance for more detailed projects. Sunlu PLA+ Silk is compatible with most FDM 3D printers, including devices from Bambu Lab, Creality, Prusa, and Anycubic, so you can easily adapt it to your equipment and start creating impressive models right away. Manufacturer Sunlu Model PLA+ Silk P Color Pink Density 1.25 g/cm³ Vicat softening temperature 54 °C Heat deflection temperature 53 °C Melting temperature 164 °C Melt flow rate 9 g/10 min Tensile strength 60.6 MPa Elongation at break 6.3% Flexural strength 65 MPa Flexural modulus 2760 MPa Impact strength 4.2 kJ/m²

Sunlu PLA+ Silk Filament (Red)Sunlu PLA+ Silk is a filament designed for prints that impress with their precision while also making a stunning visual impact. It stands out with its striking, glossy, silky finish, making the finished models look incredibly elegant and eliminating the need for additional polishing after printing. It’s the perfect choice for artistic, decorative, and creative projects where you want to achieve a more luxurious, refined look.Smooth printing without unnecessary problemsThe filament is designed to ensure the most comfortable and stable operation possible. It feeds smoothly into the printer, reducing the risk of jams and nozzle clogging, which translates to smoother printing and fewer unnecessary interruptions. Low warping and minimal shrinkage help achieve aesthetically pleasing, even prints, even with more demanding models, making the entire process easier and more predictable.A convenient choice for beginners and advanced usersSunlu SILK PLA+ was developed with user-friendly and simple operation in mind, making it ideal for both those just starting their 3D printing journey and more experienced users. The filament offers excellent printability, and an added benefit is that it does not require a heated bed, which simplifies setup and enhances the printing experience. It’s a practical solution for anyone seeking impressive print results without sacrificing ease of use.High precision and broad compatibilityA major advantage of the filament is its dimensional accuracy of ±0.02 mm, which, combined with a uniform diameter, ensures stable material feeding and repeatable results. Low shrinkage and minimal diameter deviations support operational reliability, which is of great importance for more detailed projects. Sunlu PLA+ Silk is compatible with most FDM 3D printers, including devices from Bambu Lab, Creality, Prusa, and Anycubic, so you can easily adapt it to your equipment and start creating impressive models right away. Manufacturer Sunlu Model PLA+ Silk R Color Red Density 1.25 g/cm³ Vicat softening temperature 54 °C Heat deflection temperature 53 °C Melting temperature 164 °C Melt flow rate 9 g/10 min Tensile strength 60.6 MPa Elongation at break 6.3% Flexural strength 65 MPa Flexural modulus 2760 MPa Impact resistance 4.2 kJ/m²

Sunlu PLA+ Silk Silver FilamentSunlu PLA+ Silk is a filament designed for prints that impress with their precision while also making a stunning visual impact. It stands out with its striking, glossy, silky finish, making finished models look exceptionally elegant and eliminating the need for additional polishing after printing. It’s the perfect choice for artistic, decorative, and creative projects where you want to achieve a more luxurious, refined look.Smooth printing without unnecessary problemsThe filament is designed to ensure the most comfortable and stable operation possible. It feeds smoothly into the printer, reducing the risk of jams and nozzle clogging, which translates to smoother printing and fewer unnecessary interruptions. Low warping and minimal shrinkage help achieve aesthetically pleasing, even prints, even with more demanding models, making the entire process easier and more predictable.A convenient choice for beginners and advanced usersSunlu SILK PLA+ was developed with user-friendly and simple operation in mind, making it ideal for both those just starting their 3D printing journey and more experienced users. The filament offers excellent printability, and an added benefit is that it does not require a heated bed, which simplifies setup and enhances the printing experience. It’s a practical solution for anyone seeking impressive print results without sacrificing ease of use.High precision and broad compatibilityA major advantage of the filament is its dimensional accuracy of ±0.02 mm, which, combined with a uniform diameter, ensures stable material feeding and repeatable results. Low shrinkage and minimal diameter deviations support operational reliability, which is of great importance for more detailed projects. Sunlu PLA+ Silk is compatible with most FDM 3D printers, including devices from Bambu Lab, Creality, Prusa, and Anycubic, so you can easily adapt it to your equipment and start creating impressive models right away. Manufacturer Sunlu Model PLA+ Silk S Color Silver Density 1.25 g/cm³ Vicat softening temperature 54 °C Heat deflection temperature 53 °C Melting temperature 164 °C Melt flow rate 9 g/10 min Tensile strength 60.6 MPa Elongation at break 6.3% Flexural strength 65 MPa Flexural modulus 2760 MPa Impact resistance 4.2 kJ/m²

Sunlu PLA High-Speed Olive FilamentDiscover a filament that significantly speeds up 3D printing without compromising quality. Sunlu PLA High-Speed is designed for dynamic printing and maximum workflow efficiency. Even at standard speeds of 0–100 mm/s, it offers noticeably better quality than classic PLA—model surfaces are smoother, and details are more refined. It’s the perfect choice for those who want professional results in less time.Better overhangs, fewer supports, greater savingsThanks to its improved material structure, the filament handles overhangs exceptionally well. At angles below 70°, there is no need for supports, which means both material savings and shorter preparation and post-processing times for models. Better control over print geometry makes even the most demanding projects simpler and faster to complete.Instant curing and efficient coolingSunlu PLA High-Speed stands out for its high crystallization temperature and rapid curing, which translates to print stability even at higher speeds. With heat dissipation efficiency increased by as much as 180%, the material cools faster and does not accumulate on the nozzle. In practice, this means smoother printing, a lower risk of warping, and better final quality, especially during intensive use and with dynamic settings.Wide compatibility and ease of useThe filament was designed for maximum versatility and, as a result, works seamlessly with most FDM 3D printers. The low-temperature printing process saves energy while reducing project completion times. It is the ideal solution for both hobbyists and professionals who expect reliability, speed, and high quality in a single material. Manufacturer Sunlu Model PLA H-S OG Color Olive Density 1.26 g/cm³ Vicat softening temperature 54 °C Deformation temperature 57.3 °C Melting temperature 165.3 °C Melt flow index 5.5 g/10 min Tensile strength 54 MPa Elongation at break 13% Flexural strength 75 MPa Flexural modulus 2357 MPa Impact resistance 5.9 kJ/m²

Sunlu High-Speed PLA Filament - YellowDiscover a filament that significantly speeds up 3D printing without compromising quality. Sunlu PLA High-Speed is designed for dynamic printing and maximum efficiency. Even at standard speeds of 0–100 mm/s, it offers noticeably better quality than classic PLA—model surfaces are smoother, and details are more refined. It’s the perfect choice for those who want professional results in less time.Better overhangs, fewer supports, greater savingsThanks to its improved material structure, the filament handles overhangs exceptionally well. At angles below 70°, there is no need for supports, which means both material savings and shorter preparation and post-processing times for models. Better control over print geometry makes even the most demanding projects simpler and faster to complete.Instant curing and efficient coolingSunlu PLA High-Speed stands out for its high crystallization temperature and rapid curing, which translates to print stability even at higher speeds. With heat dissipation efficiency increased by as much as 180%, the material cools faster and does not accumulate on the nozzle. In practice, this means smoother printing, a lower risk of warping, and better final quality, especially during intensive use and with dynamic settings.Wide compatibility and ease of useThe filament was designed for maximum versatility and, as a result, works seamlessly with most FDM 3D printers. The low-temperature printing process saves energy while reducing project completion times. It is the ideal solution for both hobbyists and professionals who expect reliability, speed, and high quality in a single material. Manufacturer Sunlu Model PLA H-S Y Color Yellow Density 1.26 g/cm³ Vicat softening temperature 54 °C Deformation temperature 57.3 °C Melting temperature 165.3 °C Melt flow rate 5.5 g/10 min Tensile strength 54 MPa Elongation at break 13% Flexural strength 75 MPa Flexural modulus 2357 MPa Impact resistance 5.9 kJ/m²

Sunlu PLA High-Speed White FilamentDiscover a filament that significantly speeds up 3D printing without compromising quality. Sunlu PLA High-Speed is designed for dynamic printing and maximum efficiency. Even at standard speeds of 0–100 mm/s, it offers noticeably better quality than classic PLA—model surfaces are smoother, and details are more refined. It’s the perfect choice for those who want professional results in less time.Better overhangs, fewer supports, greater savingsThanks to its improved material structure, the filament handles overhangs exceptionally well. At angles below 70°, there is no need for supports, which means both material savings and shorter preparation and post-processing times for models. Better control over print geometry makes even the most demanding projects simpler and faster to complete.Instant curing and efficient coolingSunlu PLA High-Speed stands out for its high crystallization temperature and rapid curing, which translates to print stability even at higher speeds. With heat dissipation efficiency increased by as much as 180%, the material cools faster and does not accumulate on the nozzle. In practice, this means smoother printing, a lower risk of warping, and better final quality, especially during intensive use and with dynamic settings.Wide compatibility and ease of useThe filament was designed for maximum versatility and, as a result, works seamlessly with most FDM 3D printers. The low-temperature printing process saves energy while reducing project completion times. It is the ideal solution for both hobbyists and professionals who expect reliability, speed, and high quality in a single material. Manufacturer Sunlu Model PLA H-S W Density 1.26 g/cm³ Vicat softening temperature 54 °C Heat deflection temperature 57.3 °C Melting temperature 165.3 °C Melt flow index 5.5 g/10 min Tensile strength 54 MPa Elongation at break 13% Flexural strength 75 MPa Flexural modulus 2357 MPa Impact resistance 5.9 kJ/m²

Sunlu PLA High-Speed Green FilamentDiscover a filament that significantly speeds up 3D printing without compromising quality. Sunlu PLA High-Speed is designed for dynamic printing and maximum efficiency. Even at standard speeds of 0–100 mm/s, it offers noticeably better quality than classic PLA—model surfaces are smoother, and details are more refined. It’s the perfect choice for those who want professional results in less time.Better overhangs, fewer supports, greater savingsThanks to its improved material structure, the filament handles overhangs exceptionally well. At angles below 70°, there is no need for supports, which means both material savings and shorter preparation and post-processing times for models. Better control over print geometry makes even the most demanding projects simpler and faster to complete.Instant curing and efficient coolingSunlu PLA High-Speed stands out for its high crystallization temperature and rapid curing, which translates to print stability even at higher speeds. With heat dissipation efficiency increased by as much as 180%, the material cools faster and does not accumulate on the nozzle. In practice, this means smoother printing, a lower risk of warping, and better final quality, especially during intensive use and with dynamic settings.Wide compatibility and ease of useThe filament was designed for maximum versatility and, as a result, works seamlessly with most FDM 3D printers. The low-temperature printing process saves energy while reducing project completion times. It is the ideal solution for both hobbyists and professionals who expect reliability, speed, and high quality in a single material. Manufacturer Sunlu Model PLA H-S G Color Green Density 1.26 g/cm³ Vicat softening temperature 54 °C Deformation temperature 57.3 °C Melting temperature 165.3 °C Melt flow rate 5.5 g/10 min Tensile strength 54 MPa Elongation at break 13% Flexural strength 75 MPa Flexural modulus 2357 MPa Impact resistance 5.9 kJ/m²

AGFA PHOTO - 30 Photo Cartridge 5.3 x 8.6 cm AMC30 - Compatible AGFA PHOTO Realipix Mini S, Realipix Mini P, Kodak Mini Printer 2, Kodak Mini Shot Glossy paper