Monitor 12V

Shelly Plus RGBW PM LED Strip ControllerThe Shelly Plus RGBW PM LED Strip Controller is your key to creating a unique atmosphere in your home or office. It supports 12V and 24V LED strips in White, RGB and RGBW modes, allowing you complete freedom of personalization. Subtle light for evening relaxation, dynamic lighting effects at a party or practical kitchen backlighting - you have it all at your fingertips. With no need to install additional hubs, you can start your smart lighting adventure as soon as you plug it in.Lighting effects that delightWith Shelly Plus RGBW PM, you can give your interior a unique touch. Create the right mood by dimming the light or choosing from 16 million colors. The device also offers unique lighting effects that bring any room to life - from subtle tonal transitions to dynamic color changes.Smart schedules and scenesCustomize lighting to fit your lifestyle with smart schedules and scenes. The Shelly Plus RGBW PM controller allows you to create personalized schedules that automatically adjust the light to your daily rhythm. Combine it with other Shelly devices to create a comprehensive automation system that fully meets your needs!Control at your fingertipsWith Wi-Fi and Bluetooth support, controlling your lights becomes a breeze. All you need is the Shelly Smart Control app to monitor energy consumption, set night mode or make real-time changes. The device works with the most popular platforms and protocols, as well as voice assistants such as Alexa and Home Assistant. You can also integrate it with your favorite automation system to enjoy full control over your lighting - no matter where you are.Safety and reliability in oneThe device monitors power consumption and has overload protection, which increases safety and helps control costs. The built-in ESP32 processor provides lightning-fast response to every change, so you'll see every setting change right away. The Shelly Plus RGBW PM also acts as a Wi-Fi repeater and BLE gateway, improving the range of your home network. Manufacturer Shelly Model PlusRGBWPM Dimensions 42 x 37 x 12 ±0.5 mm Weight 17 g Maximum tightening torque of screw terminals 0.2 Nm Cross section of wires from 0.1 to 1 mm² Length of stripped wire 6 mm Mounting In a wall box Housing material Plastic Housing color Yellow Connector color Green Ambient temperature -20 °C to 40 °C Humidity 30% - 70% Power supply 12/24 VDC Power consumption < 1,2 W Maximum control voltage 24 VDC Maximum control current 4 A per channel (10 A total) PWM frequency 22 kHz Voltmeter 0-24 V Voltmeter accuracy ± 5% Ammeter 0-10 A Accuracy of the ammeter ± 10% Power and energy measurement Yes No-load detection threshold 0.5 VA per channel Built-in temperature sensor Yes Wi-Fi range Up to 30 m indoors, up to 50 m outdoors (depending on local conditions) Bluetooth version 4.2 Bluetooth range Up to 10 m indoors, up to 30 m outdoors (depending on local conditions) Processor ESP-Shelly C38F Clock frequency 160 MHz RAM 400 KB Flash memory 4 MB Schedules 20 Webhooks (URL shares) 20 (5 URLs per webhook) Scripts Yes MQTT Yes

SWIT ADPV16 ir kompakts 36W barošanas adapteris ar 12V / 3A izeju, ideāls SWIT S-49xx sērijas monitoriem.

The ZGCINE ZG-X222 is a high-capacity 222Wh V-mount battery featuring bi-directional USB-C PD3.1 140W fast charging, capable of reaching an 80% charge in just 1.5 hours. It offers a wide range of output ports, including an industry-first three D-Tap ports (one with a 22V boost), and a 1.4-inch smart digital display for real-time power monitoring. The ZGCINE ZG-X222 is a professional-grade V-mount battery designed to meet the high-power demands of modern cinema cameras and production equipment. It stands out with its bi-directional USB-C PD3.1 140W capability, allowing it to be fully charged in just 2 hours and reach 80% in a remarkable 1.5 hours. A key innovation is the inclusion of three D-Tap ports, with the third port capable of a 22V high-voltage output, perfect for powering high-wattage fill lights. The battery's versatility is further enhanced by multiple interfaces, including two USB-C ports, three D-Tap ports, a DC 8V port, and a DC 12V port, making it compatible with a wide range of devices from Sony, Canon, and Nikon cameras to monitors, laptops, and LED video lights. For complete peace of mind, a 1.4-inch smart digital display provides instant, real-time feedback on port status, voltage, power output, and remaining battery life. Powered by high-quality LG cells, the battery has a large capacity of 222Wh (15000mAh) for long-lasting power. The ZG-X222 is built for durability and safety with multiple protection features and can operate reliably in extreme cold conditions as low as -20℃, ensuring safety and performance throughout its life cycle. Bi-directional PD3.1 140W Fast Charging: Charges to 80% in 1.5 hours and fully in 2 hours. High-Capacity: 222Wh / 15000mAh using high-quality LG power cells. Multiple Output Ports: Includes two USB-C, three D-Tap, DC 8V, DC 12V, and BP ports. D-Tap 22V Boost: D-Tap3 port can be boosted to 22V to power high-wattage devices. Real-Time Power Monitoring: 1.4-inch OLED display shows battery status and port info. Wide Compatibility: Powers a variety of professional cameras, monitors, lights, and other devices. Extreme Temperature Durability: Can operate in temperatures as low as -20℃. Comprehensive Safety Features: Includes protection against overvoltage, overcurrent, and more. Dimensions: 130 x 82 x 87 mm, Weight: 2.95 lbs.

TRACER HALO 360D Dashcam Complete Protection for Your Vehicle Ensure full protection on the road and while parked with the TRACER HALO 360D dashcam. Equipped with two cameras, parking mode, and a range of advanced features, this modern recorder offers comprehensive monitoring of both the interior and surroundings of your vehicle. Its compact design, high-quality recordings, and ease of use make the TRACER HALO 360D an ideal solution for every driver. 2 cameras: External Full HD 1920×1080 and internal VGA 640×480 3.0" IPS screen Parking mode Camera viewing angle: 120 degrees G-sensor 150mAh battery Built-in microphone and speaker Power supply: 12V; Type-C, 3.5 m cable Memory card support: microSD 832 GB (Class 10 or higher) Two cameras - Double protection The TRACER HALO 360D features two cameras that record both the exterior and interior of your vehicle. The external Full HD camera (1920×1080) captures clear, detailed footage of the road. The internal VGA camera (640×480) records events inside the cabin, which can be invaluable in case of incidents or the need to monitor passengers. Clear 3.0" IPS screen The 3-inch IPS display makes browsing recordings and adjusting settings extremely easy and intuitive. It provides excellent image quality regardless of the viewing angle, ensuring convenient visibility in all conditions. Parking mode - 24/7 protection No need to worry about your vehicle even when its parked. Parking mode automatically starts recording when the motion sensor detects activity around the car. This is an ideal solution for peace of mind, ensuring your vehicle is monitored even when youre away. Wide 120° viewing angle The external camera with a 120-degree viewing angle captures a broad perspective of the road, increasing the likelihood of recording important events both in front of and beside the vehicle. This provides a comprehensive view of the traffic situation. G-sensor - Secure critical recordings The built-in G-sensor automatically saves and protects footage in the event of sudden shocks or collisions. This ensures that key evidence is not overwritten or lost, which can be crucial during accident-related disputes. Built-in microphone and speaker The TRACER HALO 360D includes a microphone and speaker, allowing sound to be recorded along with video. This important feature provides more complete evidence, capturing conversations and ambient sounds when needed. Practical power supply and battery The dashcam is powered via a Type-C connector and a 3.5-meter cable, ensuring convenient installation and stable operation. The built-in 150mAh battery keeps the device running briefly after disconnecting power-useful, for example, in parking mode. microSD card support up to 32 GB The TRACER HALO 360D supports microSD cards from 8 to 32 GB (Class 10 or higher), allowing you to store a large amount of high-quality video material. This is ideal for frequent travelers who need reliable storage for their recordings. The TRACER HALO 360D is a modern dashcam that provides complete protection for your vehicle thanks to dual cameras, parking mode, and numerous advanced features. Its robust construction, convenient power system, and ability to record high-quality footage make it the perfect device for any driver looking to increase safety on the road and during parking. Full HD recording quality Get ready for top-quality video! Full HD technology means the device captures high-resolution 1920×1080 footage in widescreen format. Record your journeys in crisp Full HD / 1080p quality. Loop recording function Loop recording enables uninterrupted video capture regardless of the current memory card capacity. When the card is full, the camera continues recording by overwriting the oldest footage with new material.

Lithium NG Service Tool USB-A, ASS032300010, Victron Energy - The Lithium SuperPack NG is a drop-in replacement for lead-acid batteries, ideal for new builds or retrofits, and works with the VictronConnect app. Available in 12V, 24V and 48V models, it features a built-in Battery Management System, integrated heating for subzero charging, and an on/off switch for safe off-season storage without removing the battery. With the VictronConnect app, users can monitor State of Charge and configure settings. Capable of continuously delivering peak power, the Lithium SuperPack NG eliminates the need for bulky battery banks. It fits under a passenger seat or in other tight spaces, making a lithium upgrade even easier. With its bi-directional e-switch to avoid unnecessary shutdowns and multiple pro

Lithium NG Service Tool USB-C, ASS032300030, Victron Energy - The Lithium SuperPack NG is a drop-in replacement for lead-acid batteries, ideal for new builds or retrofits, and works with the VictronConnect app. Available in 12V, 24V and 48V models, it features a built-in Battery Management System, integrated heating for subzero charging, and an on/off switch for safe off-season storage without removing the battery. With the VictronConnect app, users can monitor State of Charge and configure settings. Capable of continuously delivering peak power, the Lithium SuperPack NG eliminates the need for bulky battery banks. It fits under a passenger seat or in other tight spaces, making a lithium upgrade even easier. With its bi-directional e-switch to avoid unnecessary shutdowns and multiple pro

LiPo external battery (Powerbank) 30000mAh 30W with 2xUSB + USB C Star-Lord black Charge your devices with the large capacity 30000 mAh Baseus Star-Lord Power Bank. This battery has a very large capacity, so you can charge your portable devices several times. Thanks to the fast charging feature, you can not only charge your devices quickly from this battery, but also charge them quickly. This power bank has two input and three output ports. You can charge the power bank using a USB-C or micro USB cable, depending on what is more convenient for you. In addition, the three output ports allow you to charge multiple devices at the same time, making it perfect for sharing power with friends or keeping multiple devices charged at the same time. Whether you are an Apple, Android or other USB-powered user, the Baseus Star-Lord Fast Charging Power Bank 30000 mAh 30W is compatible with a variety of devices, such as phones, tablets, Bluetooth headphones, etc. With the built-in digital display, you can easily monitor the power bank's battery level. Rest assured knowing that the Baseus Star-Lord's advanced safety features will protect your devices from overcharging, overheating and short-circuiting. Model No.: PPXJ3030Weight: about 658.8g30000mAh/111Wh capacityBuilt-in lithium-ion polymer batteryMicro-USB input: 5V/2AUSB-C type input: 5V/3A; 9V/3A; 12V/2.5A; 15V/2A; 20V/1.5AUSB-C type output: 5V/3A; 9V/3A; 12V/2.5A; 15V/2A; 20V/1.5AUSB-1/USB-2 output: 5V/3A; 9V/2A; 12V/1.5A; 10V/2.25A (SCP)Total output: TOTAL: 5V/3A

BlitzWolf BW-P23 100W 14000 mAh Power BankThe BlitzWolf BW-P23 100W 14000 mAh power bank is a compact power source that combines high charging power with a portable design. It offers a maximum power output of 100W, making it suitable not only for smartphones but also for laptops, including MacBooks. The 14,000 mAh capacity allows for multiple device charges, and the smart display provides full control over operating parameters in real time.Fast charging up to 100WThe BW-P23 supports fast charging up to 100W, which significantly reduces charging time. In practice, this means a MacBook Air can reach about 57% in 30 minutes, and a smartphone up to 65% in the same time. This makes the power bank ideal for situations where time is of the essence and quick access to power is crucial. High power translates to greater versatility and the ability to charge more demanding devices.14,000 mAh capacity and real-world performanceThe 14,000 mAh capacity allows for multiple smartphone charges and a single laptop charge. For example, an iPhone can be charged about 2.5 times, and a Samsung Galaxy S24 Ultra about 2 times. This performance makes the power bank ideal for travel or during a busy day away from home. Users gain greater independence from electrical outlets.Smart display and parameter controlThe device features a color screen that displays key information in real time. Users can check the battery level, current charging power, and voltage and current for each port. Additionally, the estimated runtime and the time required to fully charge the power bank are displayed. This makes it easier to monitor energy consumption and plan device charging.Wide compatibility and various portsThe power bank features a USB-C port (input/output) and a USB-A port, allowing you to charge two devices simultaneously. Support for PD, QC, AFC, and SCP protocols ensures compatibility with a wide range of devices, from smartphones to laptops. This means a single power bank can replace several chargers. This solution is convenient for both everyday use and travel.Compact design and portabilityThe vertical column-shaped casing makes the device handy and easy to carry. Weighing approximately 330 g and with compact dimensions, the power bank fits easily into a backpack or bag. The metallic finish enhances durability and gives the device a modern look. As a result, this model works well as a mobile power source for everyday use.Safety and device protectionThe BlitzWolf BW-P23 is equipped with a set of safety features that protect both the power bank and connected devices. These systems guard against overcharging, overvoltage, short circuits, overheating, and over-discharging. Additionally, safeguards against signal interference and excessively low temperatures enhance operational stability. As a result, users can use the device without worrying about the safety of their equipment.Included power bank user manual Manufacturer BlitzWolf Model BW-P23 Battery capacity 14000 mAh Battery type Lithium-ion (Li-Ion) Display TFT USB-C input 5V⎓3A, 9V⎓3A, 12V⎓3A, 15V⎓3A, 20V⎓2.25A (max. 45 W) USB-C output 5V⎓3A, 9V⎓3A, 12V⎓3A, 15V⎓3A, 20V⎓5A (max. 100 W) USB-A Output 5V⎓3A, 9V⎓2A, 10V⎓2.25A, 12V⎓1.5A (max. 22.5 W) Total Output 5V⎓3A (max. 15 W) Dimensions 140 × 44 × 34 mm Weight 330 g

OBD2 scanner and battery tester 2-in-1 Ancel AD410 PROAncel AD410 PRO is an advanced diagnostic tool, combining the functions of OBD2 scanner and battery tester in one device. Thanks to its wide range of functions, this device enables comprehensive vehicle diagnostics, both for the condition of the battery and the engine system. The ideal solution for mechanics and vehicle owners who want to have full control over the technical condition of their cars.Full functionalityThe Ancel AD410 PRO offers a full range of OBD2 functions, including reading and clearing fault codes, checking check engine light status, monitoring live data, and testing O2 sensors and the EVAP system. In addition, the device allows for I/M readiness testing, which is essential for emissions inspections. This allows the AD410 PRO to quickly identify problems and solve them effectively.Advanced battery testingThe Ancel AD410 PRO is equipped with advanced battery testing functions, including battery test, start test and charge test. These functions allow you to assess the battery's state of charge, starting capacity and charging system performance. This makes it easy for you to monitor your battery's condition and prevent failures.Intuitive interface and displayThe Ancel AD410 PRO has a 2.4-inch color LCD display and an intuitive interface, making it easy to navigate and read test results. Clear menus and easy-to-read icons make using the device simple and convenient, even for those without advanced technical knowledge.Included: OBD2 scanner/battery tester USB cable User manual Manufacturer Ancel Model AD410 Pro OBD2 diagnostic functions Error code reading and clearing, I/M Readiness, data monitoring, O2 sensor tests, EVAP tests, Freeze Frame Battery test modes Battery test, start test, charge test Supported measurement standards CCA, IEC, EN, DIN, CA, BCI, MCA, SAE, GB, JIS Display 2.4-inch color TFT display Operating voltage 12V DC Operating temperature 0 to 60°C Storage temperature -20 to 70°C External power supply From 8.0 to 18.0 V from the vehicle battery Supported languages English / French / Spanish / German / Russian / Italian / Portuguese / Finnish / Dutch / Polish Weight 0,285 kg Dimensions 127 x 82,4 x2 9,4 mm

UTRAI JS Mini Car Jump StarterAn unexpected battery problem can throw a wrench in your plans, so it’s worth having a solution on hand that lets you get back on the road stress-free. The compact UTRAI JS Mini car jump starter combines powerful starting power with a power bank function, offering reliable support on the road. It starts various types of vehicles in just a few minutes, ensures safety with smart safety features, and makes working after dark easier with a built-in LED flashlight. All of this is packed into a lightweight, portable design that you can easily take anywhere.Quick Engine StartWhen the battery fails, efficiency is what counts. The UTRAI JS Mini offers impressive performance at 13,000 mAh and a starting current of up to 1,000 A, allowing it to start vehicles with gasoline engines up to 6.0 L and diesel engines up to 4.5 L. What’s more, a single charge allows for up to 30 starts, making the device ideal not only for emergency use but also as a permanent part of your car’s equipment.Versatile use in many vehiclesThe JS Mini jump starter isn’t limited to passenger cars. It successfully powers 12V vehicles—from cars and SUVs, to pickups and trucks, all the way to motorcycles, boats, snowmobiles, and even lawn mowers. It’s a solution that gives you freedom and peace of mind no matter what you drive or where you are.More than just a starterIn addition to its starting function, the device also serves as a mobile power source. Two USB ports allow you to charge smartphones, tablets, or cameras anywhere and anytime, while the Type-C input enables convenient and fast recharging of the device itself. As a result, a single device replaces several accessories, enhancing the functionality of every trip.Light that helps in a crisisThe integrated LED flashlight is designed for emergency situations and use after dark. It offers three lighting modes (standard light, strobe, and SOS), making it easy to illuminate your workspace and signal for help. It’s a practical tool when visibility and quick action matter most.Smart safety features and full controlAdvanced clamps equipped with a smart protection system ensure safety during use. Protection against overload, overvoltage, short circuits, overheating, and reverse polarity makes using the device simple and safe even for less experienced users. Improved smart clamps also allow you to monitor operating status and check the vehicle’s battery voltage.Compact design, ready for any conditionsThe minimalist design has been refined to offer both compact dimensions and high durability for everyday use. The device operates in a wide temperature range from -20°C to 75°C, ensuring it won’t let you down in winter or summer. Its small size and lightweight casing mean the device fits easily in a glove compartment, bag, or backpack. This solution is designed with mobility, convenience, and the assurance that you always have the power you need at your fingertips.Included jumper cables smart clamps USB to USB-C cable user manual Manufacturer UTRAI Model JS Mini Peak current 1000 A Voltage 12 V Conversion efficiency 85%–90% Battery capacity 29.6 Wh Starting current 500 A Gasoline engine 6 L Diesel engine 4.5 L LED Flashlight Constant, SOS, strobe DC Output 12 V / -16 V / 10 A USB Output 5 V/3 A, 9 V/2 A, 12 V/1.5 A

Shelly Plus RGBW PM LED Strip ControllerThe Shelly Plus RGBW PM LED Strip Controller is your key to creating a unique atmosphere in your home or office. It supports 12V and 24V LED strips in White, RGB, and RGBW modes, giving you complete freedom to customize your lighting. Subtle lighting for evening relaxation, dynamic lighting effects at a party, or practical kitchen under-cabinet lighting—it’s all at your fingertips. No need to install additional hubs means you can start your smart lighting adventure right after connecting. The set includes two Shelly LED strip controllers.Lighting effects that delightWith the Shelly Plus RGBW PM, you can give your interior a unique character. Set the right mood by dimming the lights or choosing from 16 million colors. The device also offers unique lighting effects that will bring any room to life—from subtle color transitions to dynamic color changes.Smart schedules and scenesAdapt your lighting to your lifestyle with smart schedules and scenes. The Shelly Plus RGBW PM controller lets you create personalized schedules that automatically adjust the lighting to your daily routine. Connect it with other Shelly devices to build a comprehensive automation system that fully meets your needs!Control at your fingertipsWith Wi-Fi and Bluetooth support, controlling your lighting is a breeze. All you need is the Shelly Smart Control app to monitor energy usage, set night mode, or make changes in real time. The device works with the most popular platforms and protocols, as well as voice assistants like Alexa and Home Assistant. You can also integrate it with your favorite automation system to enjoy full control over your lighting—no matter where you are.Safety and reliability in oneThe device monitors energy consumption and features overload protection, which enhances safety and helps control costs. The built-in ESP32 processor ensures instant responses to every change, so every setting adjustment is immediately visible. The Shelly Plus RGBW PM also functions as a Wi-Fi repeater and BLE gateway, improving the range of your home network.IncludedShelly LED strip controller x 2 Manufacturer Shelly Model PlusRGBWPM Dimensions 42 x 37 x 12 ±0.5 mm Weight 17 g Maximum tightening torque for screw terminals 0.2 Nm Wire cross-section 0.1 to 1 mm² Stripped wire length 6 mm Installation In a wall box Housing material Plastic Housing color Yellow Connector color Green Ambient temperature from -20 °C to 40 °C Humidity 30% - 70% Power supply 12/24 VDC Power consumption < 1.2 W Maximum control voltage 24 VDC Maximum control current 4 A per channel (10 A total) PWM frequency 22 kHz Voltmeter 0–24 V Voltmeter accuracy ± 5% Ammeter 0-10 A Ammeter accuracy ± 10% Power and energy measurement Yes No-load detection threshold 0.5 VA per channel Built-in temperature sensor Yes Wi-Fi range Up to 30 m indoors, up to 50 m outdoors (depending on local conditions) Bluetooth version 4.2 Bluetooth range Up to 10 m indoors, up to 30 m outdoors (depending on local conditions) Processor ESP-Shelly C38F Clock speed 160 MHz RAM 400 KB Flash memory 4 MB Schedules 20 Webhooks (URL actions) 20 (5 URLs per webhook) Scripts Yes MQTT Yes

NP-F970-type battery with a 10500mAh/76.65wh capacity for extended usage, USB-C and USB-A connectivity for versatile charging, USB-C PD 36W fast charging support for a rapid 3.5-hour full charge, as well as touch buttons and display screen for easy battery level monitoring. Available from 21. 05. 2024. SmallRig NP-F970 USB-C Rechargeable Camera Battery is a high-capacity, high-performance, versatile, and intelligent direct charging battery with a capacity of 10500mAh (76.65Wh). Its large capacity ensures long-lasting power, meeting the power demand during shooting. The main port at the bottom of the battery can power a variety of devices such as cameras, LED video lights, monitors, motorized sliders, and others. It also comes equipped with one USB-C port and one USB-A port, allowing for charging of electronic devices like smartphones, tablets, and other electronic devices. The USB-C port functions both as an input and output, with a maximum power of 36W. Charging the battery using the USB-C port takes only 3.5 hours, empowering efficient creation. The USB-A port provides an output function with a maximum power of 27W, adding more functionality to the battery through its diverse interfaces. The USB-C and USB-A ports have parallel circuits, allowing for simultaneous fast charging of two devices. This battery also comes with touch buttons and a battery level display screen, providing precise battery level information for easy monitoring of the battery status at any time. These batteries have an innovative blend of cutting-edge technology and stylish design elements, featuring a colorful exterior design that enhances their visual appeal. In addition, this battery features high-quality battery cells, and intelligent management chips, and is equipped with multiple protection features for your creative endeavors. Parameters: 10500mAh / 7.3V / 76.65Wh Charging Voltage: 8.4V Nominal Voltage: 7.3V USB-C Input / Output: 5V/3A, 9V/3A, 12V/3A USB-C Protocol: PD 3.0 / QC 3.0 / QC 2.0 / FCP / AFC / PPS USB-A Output: 5V/3A, 9V/3A, 12V/2.25A USB-A Protocol: QC 3.0 / QC 2.0 / FCP / AFC USB-C Overcurrent Protection: >/=3.5A USB-A Overcurrent Protection: 5V/9V >/=3.5A, 12V >/=2.6A Main Port Max Discharge Current: 10A Main Port Over-Discharge Current Protection Threshold: 11A Discharge Cutoff Voltage: 5.2V Operating Temperature: 0-45°C (Charge), -10-45°C (Discharge) Weight: 362g +/-10g Dimensioms: 74.6x71.6x38.5mm Button Function: Single-clock to display the battery percentage when not charging OLED Screen: A lightning icon with the units digit of the battery percentage flashing is displayed while charging. When a device is connected to the USB-C or USB-A port, the battery level is shown for 3 seconds. If the battery lebel drops below 10%, the battery level digits flash for 3 seconds. In the Box: 1x NP-F970 USB-C Rechargeable Camera Battery 1x Battery Cover 1x USB-C to USB-C Charging Cable