Power Supply Charger

PULUZ charger + memory card case for Insta360 Ace Pro / AcePULUZ charger for Insta360 Ace Pro and Ace cameras is not only a charging tool, but also a functional case for memory cards. Perfectly matched to the batteries of these cameras, it provides convenience and safety during storage and charging.Dual charging for maximum efficiencyThe device has two charging slots so that two batteries can be charged simultaneously. Each slot has an independent power supply, allowing precise management of the charging process. Such technology prevents overcharging of the batteries, increasing battery life and ensuring safe use.Full charging controlThanks to easy-to-read LED indicators, you always know what stage of charging your batteries are in. A red LED indicates charging, and a green LED indicates full charge, allowing you to be more organized.Memory card protectionPULUZ is not only a charger, but also a safe place to store memory cards. It protects them from mechanical damage and loss, so all the data recorded during your adventures is always safe and ready for use.Included Charger USB-C charging cable Manufacturer Puluz Model PU968B Compatibility Insta360 Ace Pro / Ace Input current 5V/3A Output current 4.4V/3A Charging time 90 minutes Dimensions 5.1 cm x 5.45 cm x 4.7 cm

Convenient USB power supply – allows you to connect the lamp to a computer, power bank or standard phone charger Colored LED wires are used – which makes the colors more intense, and the neon has a decorative function even when it is not turned on Convenient on/off switch and brightness control 2 meter power cord Neon on a plexiglass base LED technology for energy efficiency Type Neon lamps Power (W) 5 Voltage (V) 5 Color Multicolor Dimensions (cm) 28x34x2 Weight (kg) 0.4

Convenient USB power supply – allows you to connect the lamp to a computer, power bank or standard phone charger Using colorful LED wires – thanks to them, the colors are more intense, and the neon performs a decorative function even when it is not turned on Convenient switch and brightness control 2-meter power cord Neon is mounted on a plexiglass base LED technology for energy efficiency Type Neon lamps Light strip length (m) - Smart function No Remote control No Power (W) 5 Voltage (V) 5 Mounting type Freestanding, hanging IP class - Material Base made of organic glass Color Multicolor Dimensions (cm) 35.4x28.2x2 Weight (kg) 0.4

Uni-T UT658LOAD USB TesterThe Uni-T UT658LOAD is a USB tester designed to test chargers, power banks, USB Type-A cables, and other power supply devices. The device measures voltage, current, energy, capacitance, equivalent circuit resistance, and the voltages of the D+ and D- lines, allowing for a more accurate assessment of the operating parameters of the tested equipment. An additional advantage of this model is its built-in electrical load, which expands its range of applications during service, production, and hobbyist testing.Wide measurement range and built-in loadThe UT658LOAD model supports USB Type-A ports and 2.0 and 3.0 protocols, measuring voltage in the range of 4–24 V DC and current from 0.05 to 3 A DC. The device also allows monitoring of capacity up to 99,999 mAh, energy up to 1,000 Wh, equivalent circuit resistance from 1 to 480 Ω, and D+ and D- data line voltage in the range of 0–3.3 V. Built-in loads of 0.5 A, 1 A, 2 A, and 3 A with a maximum power of 60 W allow for more convenient testing of the behavior of power supplies and chargers under load.Clear display and convenient data loggingThe UT658LOAD displays the most important parameters simultaneously on a single screen, facilitating quick evaluation of results. The device supports 10 sets of data memory, a maximum recording time of 99 h 59 min 59 s, and the QC 3.0 fast charging protocol. With dimensions of 122 × 53 × 27 mm and a weight of 114.4 g, the model remains handy and convenient for everyday use.Included in the set USB tester User manual Specifications Manufacturer Uni-T Model UT658LOAD Type USB tester Input and output ports USB Type A Data and charging protocol 2.0 / 3.0 Voltage range 4~24V DC Voltage resolution 0.01V Current range 0.05~3A DC Current resolution 0.01A Capacity 0~99999mAh Capacity resolution 1mAh Energy 0~1000Wh Circuit Equivalent Resistance Measurement 1~480Ω USB Data Cable D+ Voltage 0~3.3V USB Data Cable D- Voltage 0~3.3V Data Storage 10 sets Electrical Load 0.5A / 1A / 2A / 3A Maximum power 60W Maximum recording time 99h 59min 59sec Time resolution 1s Fast charging protocol QC 3.0 Color White Weight 114.4g Dimensions 122mm x 53mm x 27mm Certifications CE, UKCA

SkyRC ChargerThe SkyRC e3S charger is a compact and easy-to-use device designed for charging lithium batteries used, among others, in RC models. It supports popular LiPo, LiHV, and LiFe battery types in 2S and 3S configurations. Thanks to the automatic charging process and built-in balancer, it allows you to conveniently and safely prepare batteries for use. Its small size and mains power supply make the charger suitable for use both at home and in a model workshop.Simple operation and automatic charging processThe SkyRC e3S has been designed for ease of use. The device has a single mode button that allows you to select the appropriate battery type. When the battery is connected, the charger automatically starts the charging process, maintaining the appropriate current and voltage parameters. This means that the user does not have to manually configure the settings, which greatly facilitates everyday use.Built-in cell balancerThe charger is equipped with a balancing function that controls the voltage of individual cells in the pack. As a result, all cells are charged evenly, which helps to maintain stable battery performance and can extend its life. The maximum balancing current is 300 mA, which ensures effective control of the charging process.Compatibility with popular batteriesThe e3S model supports three popular types of lithium batteries: LiPo, LiHV, and LiFe. This allows it to be used with many batteries used in RC modeling. The charger supports 2S and 3S packs, and the charging current is automatically selected depending on the number of cells.Compact designThe device is small and weighs about 104 g, so it does not take up much space on your workstation. The housing is equipped with ventilation holes that help dissipate heat during charging, which contributes to the stable operation of the device.Battery storage modeThe charger also offers a Storage mode for LiPo and LiHV batteries. This function brings the battery voltage to a level suitable for long-term storage. In practice, this means less cell wear and greater safety when storing batteries. Manufacturer SkyRC Model e3S Power supply Input: AC 100–240 V; Frequency: 50/60 Hz Supported batteries LiPo / LiHV / LiFe Number of cells 2S, 3S 2S charging current 2.20 A ±10% (constant) 3S charging current 1.60 A ±10% (constant) Charging power 20 W ±2 W Supported batteries in Storage mode LiPo / LiHV Maximum discharge current 150 mA Discharge power 2 W Maximum balancing current 300 mA Operating temperature 0°C – 40°C Operating humidity 5–75% RH (non-condensing) Storage temperature -10°C – 70°C Storage humidity 5–75% RH (non-condensing) Housing dimensions 92 × 58 × 36 mm Weight 104 g