Powerbank adapteris

Hybrid 25W Wall Charger + Power Bank 5K + Travel Adapter Kit Our hybrid travel companion is both a powerbank and a fast-charging PD wall charger. It's a super-compact portable charger with USB-C and USB-A charging ports. Use it as a power bank on the go and a wall charger when you return to your hotel. The integrated PD3.0 PPS technology provides safe, fast charging for almost all USB and PD-enabled devices.

Slēdzis ar gaismas funkcijām: 100/75/50/25/10%. Integrēts litija jonu akumulators ar uzlādes indikatoru. Powerbank funkcija: USB uzlādes ports 1A, ierīcēm ar USB uzlādes kabeli. Korpuss izgatavots no lieta alumīnija, triecienaizsardzība izgatavota no augstas kvalitātes plastmasas. Triecienizturīgs un izturīgs pret kritieniem no 3 m augstuma. Stabils, daudzlīmeņu salokāms rāmis. Komplektā iekļauts USB uzlādes kabelis, var fiksēt un fiksēt. IP65, IK08. Gaismas ilgums līdz 25 stundām. 6500 tūkstoši Ātrās uzlādes adapteris nav saderīgs ar šo ierīci. Uzlādei varat izmantot jebkuru citu adapteri. adapteris 1172640083&BRE nav piemērots šai lampai.

Apraksts: Ražotājs: YT-829600 18V LED PROŽEKTORS, 6000 LM, 65W - BEZ AKUMULATORA Zīmols Yato Par šo produktu ES atbildīgā persona TOYA S.A. Vairāk Tips COB LED Jauda 65 W Gaismas plūsma 6000 (augstas intensitātes režīms, darbināms ar akumulatoru), 3200 (augstas intensitātes režīms, darbināms no tīkla), 1800 (zemas intensitātes režīms, darbināms ar akumulatoru), 1000 (zemas intensitātes režīms, darbināms no tīkla) lm Apgaismojuma režīmi 2: augsts, zems Funkcijas kā ārējais akumulators (power bank) Materiāls ABS, alumīnijs, PA-GF Lampas materiāls PC Lampas krāsa caurspīdīga Izmēri 250x140x300 mm Krāsas temperatūra 6500 K Krāsu atveides indekss CRI Ra 80 Magnēts jā, pamatnē Magnētu skaits 1 Pārnēsāšanas rokturis jā Akumulatora uzlādes indikators jā Akumulatora tips Li-Ion Akumulatora spriegums 18 V d.c. Akumulatoru skaits komplektā nav Elektroizolācijas klase III Mehāniskā izturība IK07 Aizsardzības klase IPX4 (izmantojot akumulatoru) Kalpošanas laiks 10000 h Svars 2,46 kg Simbols YT-829600 Jaudīgs prožektors, kas pielāgots darbam būvlaukumos, darbnīcās, kempinga apgaismojumam. Korpuss ir izturīgs pret bojājumiem, sarežģītiem laikapstākļiem, putekļiem, smiltīm utt. Tas darbojas gan ar YATO 18 V platformas akumulatoriem, gan no elektrotīkla. Caurums pamatnē ļauj to uzstādīt uz statīva. Prožektoru var izmantot kā ārējo akumulatoru (power bank). Adapteru izmantošana ļauj nodrošināt barošanu ar cita veida akumulatoriem. Gaismas avots: COB LED diodes ar gaismas plūsmu 6000 lm 2 darbības režīmi: augsts (6000 lm ar akumulatora barošanu, 3200 lm ar tīkla barošanu) zems (1800 lm ar akumulatora barošanu, 1000 lm ar tīkla barošanu) diodes kalpošanas laiks: 10000 h Barošanas avots: akumulators: Li-Ion 18 V (nav iekļauts komplektā) darbības laiks: atkarīgs no akumulatora ietilpības uzlādes laiks: atkarīgs no akumulatora ietilpības 5 pakāpju akumulatora uzlādes indikators 230 V barošanas avots, kas nodrošina darbību tīkla režīmā Uzbūve un funkcijas: powerbank funkcija - iespēja uzlādēt citas ierīces mehāniskā izturība: IK07 ūdensizturība: IPX4 (izmantojot YATO 18 V akumulatoru), nav ūdensizturības, ja tiek darbināts no tīkla gaismas krāsa: 6500 K Krāsu atveides indekss CRI: 80 Slīpuma leņķa regulēšana Ieslēgšanas/izslēgšanas poga - ieslēdz prožektoru un maina darbības režīmus Elektroizolācijas klase: III Pārnēsāšanas rokturis Cieši noslēgts akumulatora vāciņš Radiators liekā siltuma novadīšanai 4 magnēti pamatnē Caurums pamatnē, kas ļauj uzstādīt uz statīva Materiāls: ABS, ALU, PA-GF (ieskaitot korpusu, akumulatora vāciņu, rokturi, sarkano rāmi, statīvu) Caurspīdīgs PC lampas aizsegs Svars: 2,46 kg Izmēri: 250 x 140 x 300 mm Darbojas ar 18 V* sērijas akumulatoriem: YT-82842 (2 Ah) YT-82843 (3 Ah) YT-82844 (4 Ah) YT-828461 (2 Ah) YT-828462 (3 Ah) YT-828463 (4 Ah) iespēja iegādāties papildu adapterus YT-829601 (Bosch Pro (GBA 18V) tips), YT-829602 (Dewalt tips), YT-829602 (Milwaukee tips) un YT-829604 (Makita tips)​​​​​ * ir iespējams izmantot akumulatorus ar ietilpību virs 4 Ah, taču tad nebūs iespējams aizvērt akumulatora vāciņu. IPX4 - aizsardzības pakāpe saskaņā ar IEC 60529 standartu, kas nozīmē, ka ierīce ir izturīga pret ūdens šļakatām no jebkura virziena ar plūsmas ātrumu līdz 10 litriem minūtē 5 minūtes. X IPX4 nozīmē, ka nav veikti testi aizsardzībai pret cietiem priekšmetiem. IK07 - IK ir mehāniskās izturības klasifikācija, kas noteikta EN 62262 un IEC 62262:2002 standartos. Jo lielāka skaitliskā vērtība skalā no 0 līdz 10, jo augstāks izturības līmenis. IK07 nozīmē izturību pret triecienu ar 2 J enerģiju (praktiski - 0,5 kg āmura trieciens no 40 cm augstuma). PC (polikarbonāts) - augstas kvalitātes plastmasa no poliamīdu grupas, kam raksturīga lieliska mehāniskā izturība, ķīmiskā noturība (eļļas, degviela, smērvielas) un zema mitruma absorbcija. Turklāt tam piemīt augsta caurredzamība (līdz 90%), tāpēc to bieži izmanto vākos, abažūros, aizsargstiklos un tehniskajos elementos. PA-GF - augstas kvalitātes plastmasa no poliamīdu grupas,

Dizains Vienlaicīgi savienoto ierīču skaits (maks): 3 Krāsa: Melns Korpusa materiāls: Plastmasa Lādētāju saderība: E-grāmatu lasītājs, Mobilais tālrunis/viedtālrunis, Portatīvais dators/planšetes, Planšete Integrēts on/off slēdzis: Jā Iebūvētais ekrāns: Jā Ekrāna veids: LED Forma: Kvadrāts LED indikatori: Jauda Darbības rādītāji Ātrā uzlāde: Jā Bezvadu lādēšana: Jā Uzlādes avots: Līdzstrāvas, USB USB barošanas padeve: Jā Baterijas jauda: 24000 mAh Akumulatora jauda (Watt/stundas): 88,8 vatstunda Ātrās uzlādes versija: Quick Charge 2.0 Savienojamība USB A izejas porti: 1 Ievades interfeiss: USB Veids-C USB C-veida pieslēgvietu daudzums: 2 USB C veida savienotājs: Jā Enerģijas pārvaldība Porta 1 izejas strāva: 3 A Ieejas strāva: 3 A Izejas strāva: 3 A Ieejas spriegums: 24 V Izejas spriegums: 20 V Porta 2 izejas strāva: 3 A Informācija par iepakojumu Skaits iepakojumā: 1 pcs Iepakojuma tips: Kaste Iepakojuma dziļums: 80 mm Iepakojuma platums: 200 mm Iepakojuma augstums: 140 mm Iepakojuma svars: 650 g Svars&dimensijas Platums: 122 mm Dziļums: 122 mm Augstums: 28 mm Svars: 489 g Kabeļa garums: 0,75 m Iepakojuma saturs Pamācība: Jā Pievienoti kabeļi: AC, Līdzstrāvas, USB Veids-C Iekļauto adapteru skaits: 1 pcs

Self-sufficient travel with the BRESSER solar charger Whether camping, sailing, trekking or swimming at the nearest lake – anyone who enjoys being outdoors for long periods of time does not want to do without their smartphone, tablet, powerbank, etc. But one question quickly arises: where can I find the nearest power socket? After all, every battery runs out and our practical everyday helpers can't manage without electricity. With the ultra-compact BRESSER solar charger, you simply use the power of the sun to charge your devices. The environmentally friendly solar energy is free of charge – and you remain independent of the power grid! Simply open it up, put it down and immediately produce green solar power The handling is very simple: unfold the solar panel and align it as perpendicularly as possible to the sun. Then connect the device to be charged to the solar charger, either with a suitable USB cable (not included) or with the included DC connection cable. The charging process begins immediately. Which devices can the solar panel charge? The solar charger gets all devices with a USB power supply connection or the above-mentioned DC power plug connection up and running again in no time – e.g. smartphones, tablets, power banks, portable playstations, MP4 players, GPS devices and Bluetooth headphones. For charging large power stations, we recommend the more powerful BRESSER solar panels with at least 60 watts output power – see art. no. 3810050, 3810060, 3810070. Universal charger with flexible connection options Two black USB A sockets for normal charging and another orange USB A socket with QC3.0 standard for fast charging of newer generations of devices are available for powering your devices. An additional universal connection cable with a hollow DC plug 5.5/2.1 mm in diameter and 2.5 metres long, as well as 3 plug adapters (3.5/1.35 mm, 5.5/2.5 mm, 8.0/5.5/0.8 mm) are included in the scope of delivery. The polarity of the connectors is as follows: Inner contact = positive (+), outer contact = negative (-). How long does it take to charge a battery? Most modern devices with built-in batteries indicate the current charging status of the battery on a display or status LEDs. The charging process is also automatically terminated by the internal charger of the smartphone or tablet, etc., as soon as the battery is full. Nevertheless, it is helpful to know how long a full charge theoretically takes with an empty battery. This is the only way to choose the right solar panel model for the requirements of the devices you want to charge. Here is a short calculation: Divide the capacity of the battery (mAh) by the charging current of the charger (mA) and multiply this by a factor of 75. This then gives you the approximate charging time in minutes that is required to fully charge the battery at 100% sunshine duration. Example: A battery with a capacity of 3000mAh (3.0 Ah) and a charging current via 5 volt USB connection of 3100mA (3.1 amps). So 3000 : 3100 x 75 = 73 minutes. Dividing the result by 60 gives the charging time in hours: 1.2 hours. This means that an average smartphone can be fully charged in just about 1.2 hours with a 40-watt solar panel. Carabiner hooks for attachment included In order to attach the solar panel securely to an object and align it perfectly with the sun, 4 sturdy snap hooks are included in the scope of delivery. Simply connect them to the riveted ring eyelets of the solar panel and use them to hang the solar charger stably, e.g. on a tent loop, a fence or other suitable holding points. Innovative solar cell technology with high efficiency Monocrystalline silicium cells ensure high efficiency and the fastest possible charging of the device batteries. This means maximum electricity yield per solar surface. As a result, you benefit from relatively high charging currents and short charging times with a compact design. Easy transport Thanks to the modern and flat design, you can easily fold the individual se

Self-sufficient travel with the BRESSER solar charger Whether camping, sailing, trekking or swimming at the nearest lake – anyone who enjoys being outdoors for long periods of time does not want to do without their smartphone, tablet, powerbank, etc. But one question quickly arises: where can I find the nearest power socket? After all, every battery runs out and our practical everyday helpers can't manage without electricity. With the ultra-compact BRESSER solar charger, you simply use the power of the sun to charge your devices. The environmentally friendly solar energy is free of charge – and you remain independent of the power grid! Simply open it up, put it down and immediately produce green solar power The handling is very simple: unfold the solar panel and align it as perpendicularly as possible to the sun. Then connect the device to be charged to the solar charger, either with a suitable USB cable (not included) or with the included DC connection cable. The charging process begins immediately. Which devices can the solar panel charge? The solar charger gets all devices with a USB power supply connection or the above-mentioned DC power plug connection up and running again in no time – e.g. smartphones, tablets, power banks, portable playstations, MP4 players, GPS devices and Bluetooth headphones. It is also suitable for charging large power stations such as the BRESSER Power Station 100 Watt (art. no.3810000) and the BRESSER Power Station 500 Watt (art. no. 3810020) as well as power stations from other manufacturers with suitable connection values. Universal charger with flexible connection options Two black USB A sockets for normal charging and another orange USB A socket with QC3.0 standard for fast charging of newer generations of devices are available for powering your devices. An additional universal connection cable with a hollow DC plug 5.5/2.1 mm in diameter and 2.5 metres long, as well as 3 plug adapters (3.5/1.35 mm, 5.5/2.5 mm, 8.0/5.5/0.8 mm) are included in the scope of delivery. The polarity of the connectors is as follows: Inner contact = positive (+), outer contact = negative (-). How long does it take to charge a battery? Most modern devices with built-in batteries indicate the current charging status of the battery on a display or status LEDs. The charging process is also automatically terminated by the internal charger of the smartphone or tablet, etc., as soon as the battery is full. Nevertheless, it is helpful to know how long a full charge theoretically takes with an empty battery. This is the only way to choose the right solar panel model for the requirements of the devices you want to charge. Here is a short calculation: Divide the capacity of the battery (mAh) by the charging current of the charger (mA) and multiply this by a factor of 75. This then gives you the approximate charging time in minutes that is required to fully charge the battery at 100% sunshine duration. Example 1: A battery with a capacity of 3000mAh (3.0 Ah) and a charging current via 5 volt USB connection of 3300mA (3.4 amps). So 3000 : 3400 x 75 = 66 minutes. Dividing the result by 60 gives the charging time in hours: 1.1 hours. This means that an average smartphone can be fully charged in just about 1.1 hours with a 90-watt solar panel. Example 2: A large power station battery with a capacity of 13000mAh (13.0 Ah) and a charging current via 18 volts DC plug connection of 5000mA (5.0 amps). So 13000 : 5000 x 75 = 195 minutes. Dividing the result by 60 gives the charging time in hours: 3.3 hours. This means that an average smartphone can be fully charged in just about 3.3 hours with a 90-watt solar panel. Carabiner hook for attachment included In order to attach the solar panel securely to an object and align it perfectly with the sun, 4 sturdy snap hooks are included in the scope of delivery. Simply connect them to the riveted ring eyelets of the solar panel and use them to hang the solar charger stably, e.g. on a tent loop,

Nanlite FC-60B Bi-Color LED Spotlight is an ultracompact and lightweight bi-color LED spotlight that runs on batteries, powerbanks, or AC and delivers a remarkable amount of highly accurate light (3027 lux, 281 fc @1M bare bulb 5600K) while offering a versatile array of control methods: onboard, Bluetooth, 2.4G, and DMX/RDM. It's easy to pick up and start using for complete beginners, yet also provides advanced functionality for experienced creators. A latching hard-foam case is included that holds the FC-60B, AC power adapter, 45° mini-reflector, battery handgrip, and Bowens-Mount adapter.

DELTACO GAMING RGB Gaming chair in artificial leather, 332 different RGB positions, neck pillow, back pillow, black / RGBRGB Gaming chair in artificial leather with ergonomic similarities to a racing chair you see in rally cars! With high back and extra pillows for headrest and backrest, you will not have problems with back and neck after countless hours in this chair. The chair is of course raised and lowerable, as are the armrests. The pillows for the back and neck can also be adjusted for best fit.The RGB illumination has 332 different modes that you control with the included remote control. To provide power to the chair's RGB lighting, you need to connect a power source to it. You can choose between connecting a Powerbank (not included) or an external USB-A 5V 1A power adapter (not included).• RGB lighting with 332 different positions controlled by the included RF control• Artificial leather• Extra cushions for the weak and the headrest• Height and lowerable• Height and lowerable armrests• Ergonomically designed• Hydraulic gas valve• 5-point wheelbase• Nylon wheel• tiltable 90-180 °• Recommended maximum weight: 120 kg• Recommended maximum length: 185 cmNumber of armrests    2Design    Five-pointed starForm    T-shapedfeatures    Adjustable RGB backlight, hydraulic pistonfeatures    Adjustable angle 90-180 degreesColor    Black, RGBPackage Contents    Back pillow, neck pillowWheel    5Wheel    YesAdjustable height    YesAdjustable headrest    YesMaterial    LEATHERETTEMax. user height    185 cmMax. charge weight    120 kgProduct    Chair - ergonomic - armrest - tilt - swivel pinStyle    CompetitionDesigned for    GamingWeight    21 kg

Apraksts: Ražotājs: Description portable power station with 18 Ah capacity heavy-duty, robust and reinforced plastic housing construction for charging important devices independently of each other and always remain ready for use heavy duty plastic handle - with a generous recess for easy transport with protective circuit and automatic fuse on / off switch charging level indicator holder for jump start cables / clamps combines 5 functions in one compact device multifunction jump starter with start-up cable and insulated clamps compressor including adapters for inflating tires, balls, bicycle tires, etc. powerbank function for charging smartphones, tablets, etc. mobile power supply 220 V integrated LED light emergency jump start device on vehicles with a 12 volt electrical system (max. 1250 A) power supply for 2 devices with vehicle electrical system plug (12 V / 10 A) power supply for 2 devices with USB-A connector (5 V / 2 A) power supply for 2 devices with 220 V socket with built-in bright LED lamp battery capacity: 18 Ah peak current with jump start: 1250 A LED lamp: 2.5 W USB output: 5 V / 2 A (2 sockets) 12 V output: 10 A (max. 15 A) (2 sockets) 220 volt inverter continuous power: max. 400 W (peak: 800 W) (2 sockets) air compressor: max. 10.3 bar (150 psi) charging temperature: 0 - 40 °C scope of delivery: 1 jump start device 1 start-up cable with clamps 1 tire inflation hose 3 filling adapters 2 spare fuses 1 charger Technical data Packaging suitable for wall hanging No Gross weight 9496 g Operating temperature -30 - 50 °C Battery type Lead-acid Storage temperature -15 - 40 °C