Quick Lock

The CS3120 cordless chainsaw is a lightweight, convenient tool for garden and yard work. Powered by an 18V battery, it eliminates the need for fuel or wires, making it environmentally friendly, reduces noise and does not emit pollutants. Ideal for cutting wood, branches and firewood, it has an ergonomic rubberized handle and a lightweight 3.6 kg design for comfortable use. The tool-free quick chain tensioning system and automatic chain lubrication increase comfort and durability. Safety is ensured by an automatic chain brake and an accidental start lock. It has a 25 cm guide length and is compatible with Blaupunkt One DNA 18V batteries (sold separately). Technical data Voltage: 18V Total chain guide length: 250 mm Chain speed: 5.7 m/s Speed: 3000 min-1 Maximum cutting depth: 235 mm SDS system – tool-free chain tension adjustment Automatic chain lubrication (Oil tank 0.2 l) Motor type: Brushed DC Battery type: 18V lithium-ion, 4.0Ah or 5Ah recommended (not included) The price includes: Chainsaw Chain guide User manual Warranty card Dimensions: 64 x 22 x 20 cm Weight: 3.06 kg

The SA234 DSLR Aluminum Camera Tripod with Ball Head from K&F Concept is made of lightweight, rigid aluminum legs with flip-lock releases for fast setup and breakdown. This convenient tripod has a maximum height of 61.6" and has independent leg spread to allow a minimum height of 16.3" for low-level perspectives and macro photography. The legs are also reversible for inverted camera positions as low as floor level. This tripod has a load capacity of 22 lb and includes a KF-28 ball head with an Arca-type compatible quick release plate.

Dell E2225HM The Dell E2225HM is a compact and cost-effective 21.5-inch Full HD monitor that delivers a reliable entry-level solution for everyday office use. With its slim bezels, small footprint, and compact size, it fits perfectly on desks where space is limited. Despite its affordability, the E2225HM offers a smooth 100 Hz refresh rate and a high 3000:1 contrast ratio for clear visuals and deep colors throughout the workday. The monitor supports three input options – HDMI, DisplayPort, and VGA – making it compatible with both modern and legacy PCs. TÜV Rheinland’s 3-Star Eye Comfort certification and built-in ComfortView Plus technology reduce harmful blue light without compromising color accuracy, improving viewing comfort during extended use. Compatible with VESA mounts, the E2225HM can be integrated into a clean, ergonomic workspace. With Dell Display and Peripheral Manager software, users can easily adjust monitor settings and benefit from Easy Arrange features that enhance productivity. Dell E2225HM is a budget-friendly and dependable monitor for basic office tasks, backed by a 3-year Advanced Exchange Service warranty. Panel: 21.5" Vertical Alignment (VA) panel Full HD resolution (1920 x 1080 @ 100 Hz) Brightness: 250 cd/m² (typical) Contrast ratio: 3000:1 (typical) Response time: 8 ms (normal), 5 ms (fast) Viewing angles: 178°/178° Aspect ratio: 16:9 Anti-glare coating, 3H hardness Color gamut: 72% NTSC (CIE 1931) 16.7 million colors Connectivity: 1 x HDMI 1.4 (1920 x 1080 @ 100 Hz) 1 x DisplayPort 1.2 (1920 x 1080 @ 100 Hz) 1 x VGA Adjustability: Tilt: -5° to +21° Mounting: VESA: 100 mm x 100 mm Security lock slot (Kensington) User comfort: ComfortView Plus technology to reduce harmful blue light TÜV Rheinland Eye Comfort 3 Star certified Dell Display and Peripheral Manager (Windows) Compliance and standards: ENERGY STAR 8.0 EPEAT Gold + Climate+ TCO Certified & TCO Certified Edge RoHS compliant Arsenic-free glass and mercury-free panel BFR/PVC reduced circuit boards Included accessories: Monitor with stand Power cable DisplayPort to DisplayPort cable (1.8 m) HDMI cable (Japan only, 1.8 m) Quick setup guide and safety information Warranty: Three-year Advanced Exchange Service warranty.

The Prime3 TRH31 has four operating modes: drilling, impact drilling, lock-on chiseling and free-running chiseling, which undoubtedly proves its versatility. Technical data Voltage: 4V 4-stage torque adjustment No-load speed: 0-320 rpm Speed: 0-1200 rpm QCC – Quick Chuck Change Rated strokes per minute: 0-5300 rpm Cable length: 2.2 m Maximum drilling capacity: wood: 40 mm, concrete: 26 mm, steel: 13 mm 3 SDS concrete drill bits (6, 8, 10 mm) 2 chisels (pointed, flat) Drilling depth stop, auxiliary handle Power supply: 230-240V ~ 50Hz Power: 800 W, max. 1200 W Dimensions: 35 x 8 x 24 cm Weight: 3 kg

Take your camera out of CapturePRO and put it directly into your ARCA-type tripod with the included PROplate quick-release plate.Clamps to any strapConnects to any strap up to 6.4 cm (2.5”) wide and 2.2cm (0.88") thickCarry any deviceCarry binoculars, lenses, and GoPro cameras with additional plates/kits (sold separately)Instant accessInstantly access camera with quick release buttonTotal securityRedundant security lock prevents accidental releaseTripod compatibleIncludes Standard Plate, which works with most Arca-type tripods. Need Manfrotto® RC2 compatibility? Get Dual Plate Capture (Clip Only).Fast lens changesCamera locks into clip in 4 directions, enabling easier lens changes. Speed lens changes up even more with Lens Kit (sold separately)Weatherproof & water friendlyAll parts are weatherproof and resist rust and saltwaterNew for V3Way smaller30% lighter, 20% narrower, 20% lower profile than Capture v2All-metal buildAluminum alloy chassis, backplate, quick-release button and stainless steel locking pinAnodized finishFor increased durability and smoothnessGrippierEmbedded grip in backplate for maximum slip resistance2 sets of boltsThumb-drive bolts for easy clamping and unclampingHex-drive bolts for more secure/permanent installation or thicker strapsDimensions: Clip: 83 × 40 × 20 mm, 70 g Plate: 38 × 38 × 7 mm, 14 g In the box: 1 × Capture Clip 1 × Standard Plate 2 × hand drive bolts 2 × hex drive long bolts 1 × 4mm hex wrench 1 × microfiber pouch

SmallRig Cage for Nikon Z 8 3940 is designed to protect the camera and attach accessories. Locking the camera via one bottom 1/4 "-20 screw, one locating screw, and one side lock adapter on the right, the cage features rubber pads that prevent scratches and gives full access to buttons, card slots, flip screen, and battery door. Among its accessory mounting points, 1/4"-20 threaded hole, 3/8"-16 threaded hole, and ARRI 3/8"-16 locating hole support Side Handle 2093 & 3814, Top Handle 3765, Monitor Mount 2903 & 2904, Manfrotto Plate 1280, mini V Mount Battery Plate 2987; side 1/4"-20 locating hole fits Single Rod Clamp 3598 and Magic Arm 3873; and left NATO rail quickly connects Side Handle 3847 & 4017. Besides, there are cold shoe mounts for the microphone and LED video light; strap holes for Hand Strap 3848; and QD mounts for the QD strap buckle. The bottom Arca-Swiss quick-release plate supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals for a quick switch between gimbal, handheld, and tripod modes. A double-ended wrench is also included for easy disassembly and assembly. 1. Full cage protects the camera without blocking buttons. 2. Locks camera via one 1/4"-20 screw at the bottom, one locating screw, and one side lock adapter on the right. 3. 1/4"-20 threaded hole, 3/8"-16 threaded hole, ARRI 3/8"-16 locating hole, cold shoe mount, NATO rail, QD mount, strap slot. 4. Arca-Swiss quick-release plate for Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals. Note: Please remove the split ring on the right of the camera before installing this cage. Compatible With Nikon Z 8 Cage x 1 User Manual x 1 Product Dimensions: 159.1 x 56.8 x 131.0mm Package Dimensions: 184.0 x 178.0 x 80.0mm Product Weight: 203.0 ± 5.0g Package Weight: 371.5 ±5.0g Material(s): Aluminum Alloy

A quick release set based on the standard V-Lock. It comes with a Female V-Dock and a Male V-Lock

Amaran Verge Desk Clamp Stand Silver - fully-adjustable desk clamp stand for mounting the amaran Verge or Verge Max directly to your desk. Quick-locking amaran Verge Lock system for fast, secure, & tool-free mounting. 360° swing mounting arm to reach and position your light exactly where you need it. 180° pan & tilt control for dynamic overhead or low-angle lighting. Up to 1 m of smooth, vertical height adjustment for flexible desktop setups.

Amaran Verge Desk Clamp Stand Black - fully-adjustable desk clamp stand for mounting the amaran Verge or Verge Max directly to your desk. Quick-locking amaran Verge Lock system for fast, secure, & tool-free mounting. 360° swing mounting arm to reach and position your light exactly where you need it. 180° pan & tilt control for dynamic overhead or low-angle lighting. Up to 1 m of smooth, vertical height adjustment for flexible desktop setups.

Take your camera out of CapturePRO and put it directly into your ARCA-type tripod with the included PROplate quick-release plate.Clamps to any strapConnects to any strap up to 6.4 cm (2.5”) wide and 2.2cm (0.88") thickCarry any deviceCarry binoculars, lenses, and GoPro cameras with additional plates/kits (sold separately)Instant accessInstantly access camera with quick release buttonTotal securityRedundant security lock prevents accidental releaseTripod compatibleIncludes Standard Plate, which works with most Arca-type tripods. Need Manfrotto® RC2 compatibility? Get Dual Plate Capture (Clip Only).Fast lens changesCamera locks into clip in 4 directions, enabling easier lens changes. Speed lens changes up even more with Lens Kit (sold separately)Weatherproof & water friendlyAll parts are weatherproof and resist rust and saltwaterNew for V3Way smaller30% lighter, 20% narrower, 20% lower profile than Capture v2All-metal buildAluminum alloy chassis, backplate, quick-release button and stainless steel locking pinAnodized finishFor increased durability and smoothnessGrippierEmbedded grip in backplate for maximum slip resistance2 sets of boltsThumb-drive bolts for easy clamping and unclampingHex-drive bolts for more secure/permanent installation or thicker strapsDimensions: Clip: 83 × 40 × 20 mm, 70 g Plate: 38 × 38 × 7 mm, 14 g In the box: 1 × Capture Clip 1 × Standard Plate 2 × hand drive bolts 2 × hex drive long bolts 1 × 4mm hex wrench 1 × microfiber pouch

Take your camera out of CapturePRO and put it directly into your ARCA-type tripod with the included PROplate quick-release plate.Clamps to any strapConnects to any strap up to 6.4 cm (2.5”) wide and 2.2cm (0.88") thickCarry any deviceCarry binoculars, lenses, and GoPro cameras with additional plates/kits (sold separately)Instant accessInstantly access camera with quick release buttonTotal securityRedundant security lock prevents accidental releaseTripod compatibleIncludes Standard Plate, which works with most Arca-type tripods. Need Manfrotto® RC2 compatibility? Get Dual Plate Capture (Clip Only).Fast lens changesCamera locks into clip in 4 directions, enabling easier lens changes. Speed lens changes up even more with Lens Kit (sold separately)Weatherproof & water friendlyAll parts are weatherproof and resist rust and saltwaterNew for V3Way smaller30% lighter, 20% narrower, 20% lower profile than Capture v2All-metal buildAluminum alloy chassis, backplate, quick-release button and stainless steel locking pinAnodized finishFor increased durability and smoothnessGrippierEmbedded grip in backplate for maximum slip resistance2 sets of boltsThumb-drive bolts for easy clamping and unclampingHex-drive bolts for more secure/permanent installation or thicker strapsDimensions: Clip: 83 × 40 × 20 mm, 70 g Plate: 38 × 38 × 7 mm, 14 g In the box: 1 × Capture Clip 1 × Standard Plate 2 × hand drive bolts 2 × hex drive long bolts 1 × 4mm hex wrench 1 × microfiber pouch

The FALCAM F22 Quick Release Dual Head Magic Arm Kit (Black) is a compact and versatile mounting solution designed for attaching monitors, lights, microphones, and other accessories to camera rigs. Featuring dual F22 quick release baseplates, 360° rotating ball heads, and a durable aluminum alloy construction, it provides fast setup, secure positioning, and reliable support for accessories up to 7.3 lb. The FALCAM F22 Quick Release Dual Head Magic Arm Kit (Black) is a professional-grade accessory mounting solution designed to streamline workflow and improve flexibility when building camera rigs. Equipped with dual F22 quick release mounting points and independently adjustable ball heads, this compact magic arm allows users to quickly attach, reposition, and remove accessories such as external monitors, LED lights, microphones, wireless receivers, and other filmmaking equipment. Each end of the magic arm features an F22 quick release baseplate with a 1/4"-20 mounting screw and quick release button, allowing seamless integration with the FALCAM F22 ecosystem. The dual ball head design provides full 360° rotation and flexible positioning, making it easy to achieve the ideal viewing or lighting angle during production. Constructed from high-quality aluminum alloy and stainless steel, the arm delivers excellent durability while maintaining a lightweight and portable design. A centrally located hand-twist locking knob simultaneously secures both ball heads, enabling fast adjustments and stable positioning with minimal effort. With a maximum load capacity of 7.3 lb (3.3 kg), the F22 Dual Head Quick Release Magic Arm is suitable for a wide range of professional photography, videography, live streaming, and content creation applications. Key Features Dual-head magic arm with FALCAM F22 quick release system Two quick release baseplates for fast accessory mounting 360° rotating ball heads for flexible positioning Compatible with monitors, LED lights, microphones, and accessories Quick release buttons for rapid attachment and removal Universal 1/4"-20 mounting interfaces Central hand-twist knob locks all joints simultaneously Durable aluminum alloy and stainless steel construction Compatible with all FALCAM F22 quick release accessories Supports loads up to 7.3 lb (3.3 kg) 1 × FALCAM F22 Quick Release Dual Head Magic Arm Kit (Black) 2 × F22 Quick Release Baseplates Integrated Dual Ball Head Magic Arm Assembly Brand: FALCAM Model: 2548B Product Type: F22 Quick Release Dual Head Magic Arm Kit Color: Black Load Capacity: 7.28 lb / 3.3 kg Top Mount: 1/4"-20 Male with Anti-Twist Pin FALCAM F22 Quick Release Plate FALCAM F22 Quick Release Clamp Bottom Mount: 1/4"-20 Male FALCAM F22 Quick Release Plate FALCAM F22 Quick Release Clamp Points of Articulation: 2 Rotation: 360° Ball Heads Material: Aluminum Alloy, Stainless Steel Maximum Length: 4.6 in / 116 mm Width: 2.0 in / 52 mm Depth: 1.3 in / 34 mm Weight: 4.8 oz / 137 g

The FALCAM F22 Quick Release 7" Extension Magic Arm Kit is a versatile dual-ball-head mounting arm designed for flexible accessory positioning in camera rigs. Featuring F22 quick release plates, 360° rotation, and a durable aluminum and stainless-steel build, it allows fast attachment of monitors, lights, and other accessories with secure locking and stable support. The FALCAM F22 Quick Release 7" Extension Magic Arm Kit is a professional rigging solution designed to provide flexible positioning and fast accessory mounting for filmmaking and photography setups. Built for compatibility with the FALCAM F22 quick release ecosystem, it enables quick attachment and detachment of accessories such as monitors, LED lights, microphones, and wireless receivers. This extension arm features two 7-inch articulated sections connected by dual 360° rotating ball heads, allowing full directional adjustment for precise positioning. Each end includes an F22 quick release plate with a 1/4"-20 screw and anti-twist locating pin, ensuring a secure and stable connection to your gear. Constructed from a combination of aluminum alloy and stainless steel, the magic arm offers a strong yet lightweight structure capable of supporting up to 5 lb (2.3 kg) when fully extended. A hand-tightening locking knob allows users to quickly secure all joints in a single motion, ensuring stability during operation. Designed for efficiency and modularity, the system integrates seamlessly into professional camera rigs, making it ideal for dynamic shooting environments where fast reconfiguration and reliable support are essential. Key Features Compatible with FALCAM F22 quick release ecosystem Dual 7" extension arms for flexible positioning Two 360° rotating quick release ball heads Includes F22 quick release plates with anti-twist pins Supports monitors, lights, microphones, and accessories Hand-tightening knob locks all joints securely Durable aluminum alloy and stainless steel construction 3-point articulation for precise angle control Designed for professional video and photography rigs 1 × FALCAM F22 Quick Release 7" Extension Magic Arm Kit 2 × F22 Quick Release Plates 2 × 1/4"-20 Screws with anti-twist pins Brand: FALCAM Product: F22 Quick Release 7" Extension Magic Arm Kit System Compatibility: F22 Quick Release System Material: Aluminum Alloy + Stainless Steel Load Capacity: 5.1 lb (2.3 kg) Mounting: 1/4"-20 male with anti-twist pin F22 quick release plate/clamp compatible Points of Articulation: 3 Maximum Length: 247 mm (9.7 in) Width: 68.5 mm (2.7 in) Depth: 25.4 mm (1 in) Weight: 350 g (0.8 lb)

The Sennheiser MZQ-8000 is a standard microphone clip included with all MKH 8000 series microphones, designed for secure mounting on standard mic stands with angle-adjustable positioning for precise alignment in studio or field recording setups. The Sennheiser MZQ-8000 Standard Microphone Clip is a precision-engineered accessory supplied with every MKH 8000 series condenser microphone (e.g., MKH 8020, 8040, 8050), providing a reliable, vibration-damped interface between the microphone and standard 5/8"-27 threaded microphone stands or booms. Constructed from high-impact ABS polymer with a matte black finish, the clip features a dual-axis swivel mechanism (360° horizontal rotation, ±90° vertical tilt) that locks via a knurled thumb screw (torque 1.5 Nm), enabling fine-tuned directional alignment with