Quick Lock

Insta360 GO Ultra is a small action camera with huge performance that lets you capture every detail in super-smooth 4K60fps video. Color: black. The Creator Bundle includes additional practical accessories compared to the standard version. Its resolution is twice that of the previous GO 3S version's 4K30fps. The new large 1/1.28" sensor, optimized AI chip, and improved ambient light sensor ensure exceptional image quality in an incredibly compact body. The camera allows for hands-free shooting thanks to its miniature dimensions and is water-resistant to a depth of up to 10 m. The camera's operating temperature is -20°C to +40°C. Insta360 GO Ultra features advanced FlowState stabilization, 360° Horizon Lock, and AI automatic editing and video cutting. Magnetic mounting system The lightweight design, weighing only 53 g, and smart accessories allow the camera to be easily attached to magnetic surfaces. Capture original angles and views that cannot be captured with conventional cameras. Top performance in low light The large 1/1.28" sensor captures up to 200% more light than the GO 3S. The result is clear and detailed shots even in challenging lighting conditions. PureVideo mode also significantly improves night scenes. Fast charging and remote control The camera charges from zero to 80% in approximately 12 minutes, so there's no delay in shooting. When connected to the Action Pod, you can control the camera remotely and create even more creative shots. Active HDR video Even when shooting in contrasting and dynamic conditions, you'll get vivid and detailed video with the new Active HDR in 4K30fps resolution . Ultra-wide angle (156° FOV) Capture the whole scene - the camera offers a wide-angle 156° shot for maximum impact in POV and movie scenes. Removable storage GO Ultra supports microSD card replacement, so you don't have to worry about running out of space. When one card is full, simply replace it with another and continue shooting. Photo & Video Maximum photo resolution: up to 50 MP (8192×6144) Video formats: MP4 (H.264 / H.265 codecs), up to 4K60fps, 1080p@240fps Active HDR, PureVideo, Slow Motion, Timelapse, Loop Recording, Portrait Mode, FreeFrame video with HDR support Photo modes: standard photo, HDR, live photo, time-lapse, night shots (Starlapse), series (Burst) Color presets: Standard, Glow, Selfie, Vivid, Film, Vintage, Urban, Night Aperture: f/2.85 | Focal length: 14.3 mm (35 mm equivalent) Slow motion: Up to 240 fps at 1080p Time-lapse and time-shift recording Vertical recording and wide-angle aspect ratios (e.g., 2.35:1) Low light sensitivity and AI technology PureVideo mode improves shots in low light AI algorithms help with exposure, stabilization, and colors Battery and charging Standalone camera: 500 mAh | 80% in 12 min, 100% in 20 min Action Pod: 1450 mAh | 80% in 18 min, 100% in 32 min Battery life: up to 68 min on its own, up to 180 min with Action Pod Package contents: GO Ultra action camera Magnetic easy clip Lanyard Magnetic pendant Mini 2-in-1 Tripod 2.0 Quick release mount Ultra Pivot stand Technical specifications Camera dimensions: 46×45.7×18.3 mm (without cap) Weight: 52.9 g (camera) / 108.5 g (Action Pod) Storage: microSD cards up to 2 TB Sound: Stereo, active wind suppression, voice enhancement, 48kHz AAC Gyroscope: 6-axis Bluetooth: BLE 5.4 Wi-Fi: 2.4 GHz & 5 GHz (camera) | 2.4 GHz (Action Pod) USB-C 2.0 Compatibility iOS: iPhone XS and newer (iOS 13+) Android: Snapdragon 855+, Kirin 990+, Exynos 2200+, Android 10+, HarmonyOS 2+ 64-bit system required Compatibility with Bluetooth headphones (e.g., DJI Mic, AirPods)

suskleisto ilgis - 74 cm minimalus aukštis - 43 cm darbinis aukštis 153 cm maksimalus aukštis - 176 cm stovo svoris - 2,1 kg maksimali apkrova - 12 kg Anglies pluošto kojos The Kite Ardea carbon fibre tripod is specially designed for birdwatchers and the dimensions are a result of field experience. Because of the long and very rigid 100% carbon fibre legs, the scope can be raised to a usable height without the use of the central column. This provides maximum viewing stability. In combination with the carbon fibre legs, the Kite Ardea CF tripod also features magnesium components which improve the total weight and strength of the tripod. The very durable twist locks offer the best grip and keep the legs in place. As an advantage to the conventional flip locks, twist locks are faster to operate. They also allow the user to easily disassemble the legs for cleaning. Supplied complete with the Manfrotto 128RC head with quick release plate. Key features: 100% carbon fibre legsTwist locksRetractable weight hookIntegrated compassIntegrated spirit levelTwo foam gripsInterchangeable spike feetCarrying bag with carrying strap and tools

Plan your next trip with a Southwest Airlines gift card. Put it toward eligible Southwest flights, weekend getaways, family visits, business travel, holiday trips, or a vacation you have been thinking about for a while. Whether you are flying across the country, heading home, or booking a quick break, a Southwest gift card helps cover the travel that gets you there. A Southwest Airlines gift certificate is all about flights. Use it when booking eligible passenger air travel through Southwest, including many of the taxes and fees tied to your ticket. It is a strong pick when you want travel value that can go toward real plans, from a short domestic route to a longer trip with a few stops along the way. What can I do with a Southwest Airlines gift card? Spend your Southwest gift card on: Domestic flights. Book eligible Southwest flights across the United States, including city breaks, beach trips, family visits, work travel, and weekend escapes. One-way travel. Put it toward a single flight when you only need to travel in one direction or want to plan each leg separately. Round-trip flights. Cover part or all of a return journey when you are booking a complete trip there and back. Family visits. Fly to see parents, grandparents, siblings, friends, or relatives for holidays, reunions, birthdays, or long weekends. Business travel. Use it for work trips, meetings, conferences, client visits, and other professional travel plans. Vacation flights. Put it toward flights for beach holidays, city stays, national park trips, theme park breaks, or a getaway you have been saving for. Holiday travel. Book flights for Thanksgiving, Christmas, New Year, spring break, summer holidays, or other busy travel periods. Airport ticket counter bookings. Redeem it toward eligible Southwest travel at a Southwest ticket counter when it suits your plans. Online bookings. Use your Southwest gift card when booking eligible flights through Southwest’s online booking options. Phone bookings. Put the card value toward eligible flight reservations made through Southwest customer service. Future travel plans. Keep it ready for the next time a trip comes up, whether it is planned months ahead or booked closer to departure. Take off with a Southwest gift card A Southwest Airlines gift card keeps the focus on the part of travel that matters most: getting your flight booked. Put it toward a quick weekend away, a visit home, a work route, or the first step of a bigger vacation. It works best for passenger airfare, so it is a practical choice when your plans revolve around flying rather than hotels, rental cars, or extras. Use your Southwest Airlines gift certificate when you are ready to choose your route, compare flights, and lock in the trip. From early morning departures to relaxed holiday travel, a Southwest gift card gives you prepaid value for the journeys you are ready to take next.

A modern panoramic camera head that allows you to create sophisticated camera movements and time-lapse images as if by magic! The new v2 version allows you to adjust the head position manually, adds face tracking with your phone (iOS only), can rotate 2x faster and features a safety lock. The HeadONE v2 is not to be missed in any content creator's backpack! On sale now through 11/2023. The HeadONE design allows you to carry only what you need: Get a HeadONE head and use it to shoot panoramic video, 360º photography and time-lapse photography. It's also great for repeating the same shot multiple times to achieve fascinating visual effects, animations, etc. When you add a second HeadONE device (Tilt Module required), the two devices pair with each other in the background and can be controlled using the same app, allowing you to create dual-axis movements. When you add a tilt axis, you'll get much more interesting panoramic videos, 360º spherical photos and dynamic time-lapse images. Edelkrone appIntuitively adjust angles manually or effortlessly with the Edelkrone App. The new manual controls make your work unprecedentedly quick and easy, making the whole process much more intuitive. Use the Edelkrone App to control from your phone, watch, tablet or Mac (with M processor), or get a Mac/PC adapter to control from other Macs and PCs. In combination with other Edelkrone motion control devices (sliders, arms, etc.) you can easily create 3- or 4-axis camera movements. With Edelkrone motion control products you can create complicated trick shots, animated movies and other otherwise very difficult shots. The devices pair instantly to the background. Setting up time-lapse motion capture is a breeze with the Edelkrone app... Face trackingHeadONE and all other Edelkrone motion control devices can perfectly replicate any camera movement. Add a little camouflage magic with your favorite video editing software and wow your audience. Phone mode extends the HeadONE device with face tracking features. Whether you use one HeadONE device or two, Phone Mode ensures that the camera (or phone) accurately tracks your subject's face. Whether you're recording presentations, hosting webinars, recording your adventures, conducting interviews or making documentaries, Phone Mode keeps everything in focus. 360° Mode360° Mode lets you take panoramic gigapixel photos up to 360 degrees. Take many photos side-by-side in a row and stitch them together on your computer for ultra-high resolution, wide-angle shots of any environment. The 360 mode becomes available in the Edelkrone app when you connect to any of the HeadONE devices as a standalone device. Dimensions: 99 x 95 x 47.5 mm Weight: 580 g Recommended load: 6.8 kg Mounting options: 3/8"-16 on top; 3/8"-16 mounting hole on bottom; supplied incl. 3/8"-16 to 1/4"-20 reducer Minimum step size: 0.00061 degrees Maximum speed: 25.7 degrees/sec. Number of axes: 1x Max. speed: 1: ∞ x 360° Motor type: stepper motor with very high resolution encoders Power consumption: 1x Canon battery type LP-E6 is required for operation. Battery holder included. Battery is not included. Battery life: 1x Canon LP-E6 14.4 Wh battery operates for 3 hours (continuously at full power), takes 15,000 photos (in time-lapse mode) Shutter release connector: 2.5mm (shutter release cable sold separately) Can be paired with: SliderONE v2, Motor Module (formerly known as Slide Module v2/v3), DollyONE and DollyPLUS Mobile Device Connection: 2.4GHz direct connection for device-to-device communication and BLE for pairing/connection to mobile phone App Compatibility: iOS 11.0 or later and Android 5.0 or later Materials: CNC machined aluminum and stainless steel components

Falcam TreeRoot Quick Lock Travel Tripod ir viegls un stabils ceļojumu trijkājs ar unikālu trīsstūra dizainu un augstas kvalitātes M40 oglekļa šķiedras kājām.

 The **Saeyang** brand offers high-quality tools useful when performing professional manicure and pedicure treatments. The Saeyang products, valued among cosmetologists, are characterized by excellent workmanship, precision and the use of innovative solutions.  Perfect nail drill for mobile services -------------------------------------- The **Saeyang Marathon K38 PRO compact cordless nail drill with a brushless motor** is a practical device that is perfect for mobile nail stylists. It facilitates preparing nails and cuticles, thus creating an ideal basis for creating further styling. It allows for comfortable work for up to **8 hours on a single charge**.  Brushless BS30 head ------------------- The **slim BS30 head** fits well in the hand and allows for comfortable, precise work. Thanks to the **appropriate balance and significant reduction of vibrations**, using it does not tire the hand excessively, allowing even many hours of treatments. It is equipped with an **easy-to-use Twist-Lock system**, which allows for quick and easy replacement of nail drill bits. This makes working with the device extremely **easy and intuitive**, which will also be appreciated by more demanding users.  Digital display and LED indicators ---------------------------------- Using the knob, you can adjust the speed of the head up to **35,000 revolutions per minute**, allowing for efficient customization and therefore **comfortable performance of a wide range of treatments**. Useful buttons located on the sides allow you to easily switch the control to the foot drive, stop the device (pause function), and change the direction of rotation, which provides **full control over the nail drill** and makes it easier to adapt its operation to specific services. **LED indicators** allow you to monitor the status of the equipment – they inform about the direction of rotation, battery status, activation of the foot drive and pause. The device is equipped with **overload protection** with an LED warning signal, which **protects the motor from overheating**, thereby ensuring greater safety of work and protecting the equipment from damage.  Precise functionalities for comfort of use ------------------------------------------ The nail drill **operates quietly**, eliminating irritating noise and providing comfort for both the practitioner and the clients. The built-in **2850 mAh battery** allows comfortable work for up to 8 hours on a single charge. What's more, the device has an **automatic energy-saving mode**, which prevents battery discharge. Additionally, the device has been **designed with ergonomics in mind** – convenient arrangement of buttons and **intuitive operation** make every procedure run smoothly.  Aesthetic device with compact dimensions ---------------------------------------- The **minimalist plastic housing** in shades of white **ensures durability and ease of cleaning**, and is also a visually interesting addition to the workplace. The **compact dimensions and lightweight design** make the nail drill perfect for both small workstations and during transport – **especially useful for mobile services**. For greater stability, the device has been equipped with **rubberized elements** on the bottom, which prevent sliding during use, **ensuring safe and comfortable work**.  **The set includes:** nail drill base, head, power supply, silicone head stand, instructions. **Data:** Housing color: shades of white Rotation speed: 35,000 RPM

SmallRig 4-Arm Suction Cup Camera Mount Kit SC-15K 3565 represents a professional and reliable solution to vehicle-based or other personalized photography. With powerful suction force, the mount has maximum horizontal suction of 120 kg and maximum vertical suction of 30 kg. The suction cup camera mount, with great air-tightness and wear resistance, can work at -20° C to 60° C,  suitable for clean, dry, smooth, and even curved surfaces. The kit consists of 4 suction cups, 4 x 11" magic arms, 1 lens support, 1 half ball head, and 2 cable tethers. Among them, the suction cup quickly attaches the magic arm via a NATO clamp to prevent twisting; the half ball head, which is -8°/+8° adjustable, supports Arca-Swiss and DJI RS stabilizer quick release plate for quick switch between cars, handheld, and stabilizer shooting; and the cable tether ensures your gear is safe. The kit also comes with an integrated storage case, which is resistant to dust, abrasion, and rain in complex outdoor environments. 1. Load capacity of 120 kg.2. Quick release  via a NATO clamp.3. A comprehensive solution to the power supply and image  transmission.4. The Half-ball head locks the mount while  allowing for fine adjustment of shooting angles.5. Supports  Arca-Swiss and DJI RS stabilizer quick-release plate for quick switch between  car, handheld, and stabilizer shooting. Disclaimer: Please mount it onto recommended surfaces and check at least every four hours.  Note:1. Suitable for clean and glossy surfaces, not for rough, uneven, dirty, or fragile surfaces.2. Please always keep the sucker and filter cotton intact and clean.3. Please apply it carefully to coated surfaces.4. When the safety-line indicator shows, it means vacuum loss. Pump the plunger until 100% vacuum pressure.5. It better work with a camera cage. Warnings:1. The 4-Arm Suction Cup Camera Mount Kit, when adhering to a still object, has a tested maximum horizontal suction of 120 kg and maximum vertical suction of 30 kg. Please check the suction force every 24 hours.2. It is recommended, when adhering to a vehicle, the 4-Arm Suction Cup Camera Mount Kit works with a cable tether and bears no more than 15kg. Please run the vehicle smoothly at a speed of below 80km/h and check the suction force every 2 hours.3. Suitable  for dry, flat, glossy, solid surfaces, not for painted surfaces, natural marble, old tiles, breathable wallpaper, diatom mud walls, unpainted wood,  frosted glass, and other rough or breathable materials.  4. Works at -20°C to 60°C.5. When the safety-line indicator shows, it means vacuum loss. Pump the plunger until 100% vacuum pressure.6. Please follow the instructions.  Products that are damaged due  to improper use are not eligible for after-sales service. 4 x 4″ Vacuum Suction Cup3 x Magic Arm1 x Half Ball Head1 x Magic Arm with Lens Support1 x Battery Adapter Plate2 x Cable Tether1 x Velcro1 x Storage Case Product Dimensions: 424.8 x 300.0 x 58.8mmPackage Dimensions: 363 x 271 x 142mmProduct Weight: 3433g±5gPackage Weight: 4328g±5gMaterial(s): Aluminum Alloy, NBR, ABS, Stainless Steel

ThinkVision T27QD-4V combines modern design, performance, and sustainability. The ThinkVision T27QD-4V is designed for professionals who expect more from their monitor. Its 27" QHD IPS panel delivers exceptional sharpness and natural color accuracy, making both work and communication pleasant and effortless. Video conferences run smoothly and professionally thanks to the integrated 5 MP camera, high-quality 5W speakers, and built-in microphone. AI-powered features such as automatic face framing, multi-person detection, and intelligent volume control adapt to your needs, ensuring every meeting flows seamlessly. Windows Hello support enables quick and secure logins with just a glance. The natural low blue light filter helps reduce eye strain and enhances comfort during long working hours. The USB-C docking feature simplifies your workspace — a single cable transfers video, data, and up to 100W of power to your connected device. ENERGY STAR and EPEAT Gold certifications highlight the monitor’s energy efficiency and environmentally conscious design, making it a smart choice for any modern workspace — in the office or at home. Top Features: Screen size: 27" Resolution: 2560x1440 QHD Panel type: IPS Aspect ratio: 16:9 Refresh rate: 48–120 Hz Brightness: 350 cd/m² Contrast ratio: 1500:1 Response time: 6 ms (Typical), 4 ms (Extreme) Color gamut: 99% sRGB, 99% BT.709 Color depth: 8-bit Ports: HDMI 2.1 TMDS, DP 1.4 (HBR2), DP-Out 1.4, USB-C 3.2 Gen1 (DP 1.4 Alt Mode), USB-C 3.2 Gen1 (15W PD, data only), 3x USB-A 3.2 Gen1, RJ45, audio combo USB-C power delivery: up to 100W (PD 3.0) Integrated webcam: 5.0 MP, IR + RGB Integrated speakers and microphone: Yes Power consumption (Typ/Max): 23.4W / 173W Viewing angle (H/V): 178° / 178° Tilt: -5° / 23.5° Swivel: -45° / 45° Height adjustment: 155 mm Pivot: -90° / 90° VESA mount: 100 x 100 mm Kensington lock slot: 2.5 x 6 mm Lenovo Display Fleet Manager (LDFM) and Lenovo Accessories and Display Manager (LADM) Included cables: USB-C (1.8 m) and DP (1.8 m) Weight: 7.2 kg with stand, 5.0 kg without stand Three-year replacement warranty Environmental Certifications ENERGY STAR Certified, TCO 10, TCO Edge 2.1, EPEAT™ Gold, EU Energy Efficiency Level (Level-F), Volatile Organic Compound Certification, RoHS Ergonomic Certifications Eyesafe® Display 2.0, TÜV Low Blue Light (Hardware Solution), TÜV Rheinland® Eye Comfort (5 Stars)

The first slider in the world that combines portable size with long camera travel. What makes SliderPLUS magical?With its award-winning unique design, you will travel with half the weight of a traditional slider and work in tight/crowded spaces much more efficiently. 2 Models & 4 SizesStandard models are lighter and more affordable. PRO models have higher carrying capacity. Fast to Set up - Easy to RelocateNo tools or assembly required. It takes only a few seconds to set up for quick filming and location changes. SliderPLUS has a locking mechanism to make it immobile so you don't need to disassemble the system to relocate. All Models Fit in edelkrone BackpackThis amazing portability makes it very easy to carry your SliderPLUS. You will use it more often! Built-in Foldable LegsYou may adjust each leg independently to adapt to the terrain or fold them up for easy storage. Magnetic Belt ClipsYou can replace the belts whenever you need without wasting time thanks to the magnetic snap-on belt clips. Pop-up ScrewThe mounting screw on top can retract to protect your bag from scratches and tears. Steady ModuleWith Steady Module, even beginners can get perfectly smooth manual slides at the first try, even at very low speeds! No batteries. No chargers.Completely mechanical solution. Uses fluid dynamics to dampen and smooth out the movement. Perfect for remote locations with no electricity.   MODEL -Standard Box Contents - SliderPLUS, 2 x Geared belts with magnetic clips, 2 x fabric belts with magnetic clips, Cleaning Kit, Allen Keys, 2 x Spare module attachment screws. Camera travel on tripod - Compact: 1.3 ft (40 cm) Long: 2.6 ft (80 cm) Camera travel on ground - Compact: 0.7 ft (20 cm) Long: 1.3 ft (40 cm) Load capacity on tripod - Compact: 15 lb (6.8 kg) Long: 10 lb (4.5 kg) Load capacity on ground - Compact: 50 lb (22.5 kg) Long: 40 lb (18 kg) Weight - Compact: 3.04 lb (1.38 kg) Long: 3.2 lb (1.45 kg) Size (L x W x H) - Compact: 13.22 x 4.25 x 2.79 in (336 x 108 x 71 mm) Long: 21.10 x 4.25 x 2.79 in (536 x 108 x 71 mm) Mounting options - 3/8"-16 mounting port on bottom 3/8"-16 mounting screw on top Working mechanism - Non-friction ball bearing, Tracking system Additional features - Safety lock, Foldable legs, Magnetic belt clips Materials - CNC machined aluminum and stainless steel components, Steel ball bearings, Temperature-treated aluminum rods Suggested tripod specs- Compact: Distance between legs should be 27.5 in (70 cm) or more, Long: Distance between legs should be 43 in (110 cm) or more

Sirui videotripod SQ75+VHS10 has the One-Step hight adjustment Rapid System. The strong carbon fiber twin-leg tube, ground spreader, patent design side flip lock and side loading quick release plate further increase stability and flexibility.

The locking mechanism of the QL40B tripod allows users to conveniently adjust the height using the leg locks located at the top of the tripod. The flip-type Quick Lock shape is ergonomically designed, making it easy to grasp with fingers from both the bottom and sides. This allows for quick and easy installation. Easy maintenance With the included special screwdriver, users can easily adjust the tripod lock strength. Compared to conventional Quick Lock tripods, the QL40B is designed to maintain the lock strength for a much longer period of time. Comfortable handle A handle is included to make it easy to carry. The handle can be easily removed when not in use. Lightweight design Despite being a long aluminum tripod, the QL40B weighs only 2.6 kg. When using the carry handle, it feels much lighter than the previous RT30B model. 40 kg load capacity The QL40B has a load capacity of 40 kg, providing a higher capacity than other quick release tripods. It can safely carry heavier camera systems without any problems. Tripod length The maximum height of the QL40B is approximately 30 cm higher than the current RT30B tripod with a 75mm base. With the video head and bottom strut, this tripod can reach a height of up to 198 cm. Since the camera lens can easily exceed 200 cm in height, high angle shots can be achieved without the need for additional accessories. Smooth extension When the Quick Lock is released, the legs extend smoothly without resistance, allowing the tripod to be mounted quickly and smoothly. User-friendly port for accessories A 1/4" and 3/8" threaded accessory port is located on three sides of the tripod base, providing a convenient way to securely mount accessories such as monitors and lights. Safety design With safety in mind, the tripod legs are carefully designed to prevent users from getting their fingers pinched when intentionally or unintentionally folding the tripod. Expected availability: from April 2025.