Quiet Computer Case

DarkFlash EMT650 computer power supply (black) The DarkFlash EMT650 power supply is a 650 W unit designed to the ATX standard (140 × 150 × 86 mm). The single +12 V line design delivers up to 54 A, making it suitable for the latest processors and graphics cards. In addition, the 80 PLUS Bronze certification confirms high energy efficiency of up to 86.96%. This reduces energy loss and ensures stable operation under load. Single +12 V rail and DC-to-DC conversion The use of a single +12 V rail with DC-to-DC conversion allows up to 98% of the available power to be delivered to the most important components of the system. This system converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and low fluctuations even under variable loads. This solution promotes the reliable operation of modern processors and graphics cards with high energy requirements. High efficiency and 80 PLUS Bronze certification 80 PLUS Bronze certification guarantees high energy efficiency at typical load levels. Efficiency of up to 86.96% means less energy loss converted into heat, which translates into more stable operation of the entire system. This characteristic also helps to reduce power consumption and maintain appropriate power supply parameters during intensive computer operation. Active PFC and power stability The power supply is equipped with an active PFC system with up to 98% efficiency, which improves the power factor and increases the energy efficiency of the entire unit. This solution reduces energy losses, limits heat generation, and reduces electromagnetic interference. As a result, the power supply provides stable power to all computer components. High-quality components and Japanese capacitors Japanese electrolytic capacitors with an operating temperature of up to 105°C are used inside the power supply. High-quality components and a solid internal design ensure stable operation and reliability even under long-term load. In addition, the use of switching transformers, EMI filters, and heat sinks that limit heating supports the safe and efficient operation of the unit. Quiet and intelligent cooling A 120 mm fan with FDB (Fluid Dynamic Bearing) is responsible for cooling the power supply, which is characterized by low noise and high durability. An intelligent temperature control system automatically adjusts its speed to the current load. In addition, there are honeycomb ventilation holes at the rear of the device and longitudinal holes at the front – this solution increases the heat dissipation area and allows for efficient air flow. Comprehensive system protection The DarkFlash EMT650 is equipped with a 6-level protection system that protects both the power supply and computer components. It includes protection against overvoltage, overload, overcurrent, short circuit, overheating, and undervoltage. All this increases the safety and stability of the system in various conditions. Low power consumption in standby mode The EMT650 is designed for high energy efficiency, even in standby mode. The system's power consumption in standby mode is less than 0.5 W, which reduces unnecessary consumption. This solution minimizes energy loss, supports energy-efficient computer operation, and promotes long-term, stable power supply operation. Wide compatibility The power supply has a non-modular design with flat cables, which facilitates cable management and improves airflow inside the case. The unit offers 20+4-pin connectors for the motherboard, 8-pin (4+4) connectors for the processor, 6+2-pin PCI-E connectors for graphics cards, and SATA and IDE connectors for powering drives. The EMT650 model is fully compatible with modern Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards – it will also work well in configurations with multiple GPUs. What's more, thanks to its small dimensions (140 × 150 × 86 mm), the power supply fits into most PC cases.

Darkflash DS900W computer case without fans (Black).The Darkflash DS900W case combines modernistic design with high functionality - the panoramic glass without A-pillar (A-Pillar) strikingly exposes the interior, and the well-thought-out design ensures stability and easy installation. It supports up to 10 fans and 360mm cooling to ensure efficient heat dissipation. Dust filters protect components, and the large internal space allows for mounting high-performance components. A USB Type-C (Universal Serial Bus, a connector standard used to power or charge electronic devices, as well as transfer data) connector on the front ensures fast and seamless connectivity, while the aesthetically pleasing finish and sturdy construction make it a great choice for those looking to assemble a high-performance and modern PC setup.Minimalist design with a panoramic viewThe Darkflash DS900W is for those looking for a sleek, futuristic design combined with functionality. The woodgrain accent front and double-sided tempered glass construction give the case a unique style and provide a 270° panoramic view of components without a disruptive A-pillar, making the entire interior composition aesthetically pleasing and transparent. With Darkflash, you'll build a stylish gaming space while providing your computer components with maximum protection.Stable design without compromisesThe case is based on a mechanical structure, which is shaped like a closing bracket, which translates into greater rigidity and resistance to deformation. The lack of a classic A-pillar does not negatively affect stability - on the contrary, the whole structure is characterized by high load-bearing capacity and strength, which will be especially appreciated by users building high-performance sets with heavy graphics cards.Powerful cooling without limitsThe DS900W is designed for maximum thermal efficiency. Up to 10 120mm fans can be installed inside, as well as CPU (Central Processing Unit, CPU) cooling up to 170mm high, effectively keeping temperatures down even during heavy use. Additional vents and a metal mesh back panel increase airflow and improve cooling performance by up to 15% while reducing noise levels (10% reduction). This allows you to enjoy pleasant, quiet operation, whether you are playing more demanding titles or using advanced graphics programs.Full protection against dustThe entire chassis has been protected from dust - it uses covers that effectively block particles, pollen and other debris from getting inside. This solution keeps the interior clean, which not only extends the life of components, but also makes them easier to maintain.Thoughtful space for expansionInside, there is no shortage of space for large components. In the DS900W you can mount a graphics card of up to 425 mm in length, as well as a heatsink of up to 360 mm on top and 240 mm on the side. The case supports motherboard formats ATX (Advanced Technology eXtended, standard motherboard and computer case size), M-ATX (Micro Advanced Technology eXtended, motherboard and computer case size smaller than ATX) and ITX (Information Technology eXtended, compact motherboard and computer case format). In addition, 7 PCI (Peripheral Component Interconnect, a connector standard for expansion cards, such as graphics or sound cards) slots provide ample opportunity to expand the kit with more expansion cards. Darkflash thinks of the most demanding gamers who expect reliability from their hardware.Easy access to the Type-C portOn the front of the case is a USB Type-C port, which offers fast data transfer (up to 10 Gbps) and convenient access for various electronic devices. This solution makes the case ready for current hardware standards, being always at your fingertips.Functional details and solid finishThe Darkflash DS900W is equipped with anti-vibration trapezoidal feet, which increase the stability of the design and reduce vibrations. Inside you'll find room for two SSDs (Solid State Drive, solid state dr

Darkflash DS900W computer case without fans (White).The Darkflash DS900W case combines modernistic design with high functionality - the panoramic glass without A-pillar (A-Pillar) strikingly displays the interior, and the well-thought-out design ensures stability and easy installation. It supports up to 10 fans and 360mm cooling to ensure efficient heat dissipation. Dust filters protect components, and the large internal space allows for mounting high-performance components. A USB Type-C (Universal Serial Bus, a connector standard used to power or charge electronic devices, as well as transfer data) connector on the front ensures fast and seamless connectivity, while the aesthetically pleasing finish and sturdy construction make it a great choice for those looking to assemble a high-performance and modern PC setup.Minimalist design with a panoramic viewThe Darkflash DS900W is for those looking for a sleek, futuristic design combined with functionality. The woodgrain accent front and double-sided tempered glass construction give the case a unique style and provide a 270° panoramic view of components without a disruptive A-pillar, making the entire interior composition aesthetically pleasing and transparent. With Darkflash, you'll build a stylish gaming space while providing your computer components with maximum protection.Stable design without compromisesThe case is based on a mechanical structure, which is shaped like a closing bracket, which translates into greater rigidity and resistance to deformation. The lack of a classic A-pillar does not negatively affect stability - on the contrary, the whole structure is characterized by high load-bearing capacity and strength, which will be especially appreciated by users building high-performance sets with heavy graphics cards.Powerful cooling without limitsThe DS900W is designed for maximum thermal efficiency. Up to 10 120mm fans can be installed inside, as well as CPU (Central Processing Unit, CPU) cooling up to 170mm high, effectively keeping temperatures down even during heavy use. Additional vents and a metal mesh back panel increase airflow and improve cooling performance by up to 15% while reducing noise levels (10% reduction). This allows you to enjoy pleasant, quiet operation, whether you are playing more demanding titles or using advanced graphics programs.Full protection against dustThe entire chassis has been protected from dust - it uses covers that effectively block particles, pollen and other debris from getting inside. This solution keeps the interior clean, which not only extends the life of components, but also makes them easier to maintain.Thoughtful space for expansionInside, there is no shortage of space for large components. In the DS900W you can mount a graphics card of up to 425 mm in length, as well as a heatsink of up to 360 mm on top and 240 mm on the side. The case supports motherboard formats ATX (Advanced Technology eXtended, standard motherboard and computer case size), M-ATX (Micro Advanced Technology eXtended, motherboard and computer case size smaller than ATX) and ITX (Information Technology eXtended, compact motherboard and computer case format). In addition, 7 PCI (Peripheral Component Interconnect, a connector standard for expansion cards, such as graphics or sound cards) slots provide ample opportunity to expand the kit with more expansion cards. Darkflash thinks of the most demanding gamers who expect reliability from their hardware.Easy access to the Type-C portOn the front of the case is a USB Type-C port, which offers fast data transfer (up to 10 Gbps) and convenient access for various electronic devices. This solution makes the case ready for current hardware standards, being always at your fingertips.Functional details and solid finishThe Darkflash DS900W is equipped with anti-vibration trapezoidal feet, which increase the stability of the design and reduce vibrations. Inside you'll find room for two SSDs (Solid State Drive, solid state d

DarkFlash EMT750 computer power supply (black) The DarkFlash EMT750 power supply is a 750 W unit designed to the ATX standard (140 × 150 × 86 mm). The single +12 V line design delivers up to 62 A, making it suitable for the latest processors and graphics cards. In addition, the 80 PLUS Bronze certification confirms high energy efficiency of up to 87.28%. This reduces energy loss and ensures stable operation under load. Single +12 V rail and DC-to-DC conversion The use of a single +12 V rail with DC-to-DC conversion allows up to 98% of the available power to be delivered to the most important components of the system. This system converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and low fluctuations even under variable loads. This solution promotes the reliable operation of modern processors and graphics cards with high energy requirements. High efficiency and 80 PLUS Bronze certification 80 PLUS Bronze certification guarantees high energy efficiency at typical load levels. Efficiency of up to 87.28% means less energy loss converted into heat, which translates into more stable operation of the entire system. This characteristic also helps to reduce power consumption and maintain appropriate power supply parameters during intensive computer operation. Active PFC and power stability The power supply is equipped with an active PFC system with up to 98% efficiency, which improves the power factor and increases the energy efficiency of the entire unit. This solution reduces energy losses, limits heat generation, and reduces electromagnetic interference. As a result, the power supply provides stable power to all computer components. High-quality components and Japanese capacitors Japanese electrolytic capacitors with an operating temperature of up to 105°C are used inside the power supply. High-quality components and a solid internal design ensure stable operation and reliability even under long-term load. In addition, the use of switching transformers, EMI filters, and heat sinks that limit heating supports the safe and efficient operation of the unit. Quiet and intelligent cooling A 120 mm fan with FDB (Fluid Dynamic Bearing) is responsible for cooling the power supply, which is characterized by low noise and high durability. An intelligent temperature control system automatically adjusts its speed to the current load. In addition, there are honeycomb ventilation holes at the rear of the device and longitudinal holes at the front – this solution increases the heat dissipation surface and allows for efficient air flow. Comprehensive system protection The DarkFlash EMT750 is equipped with a 6-level protection system that protects both the power supply and computer components. It includes protection against overvoltage, overload, overcurrent, short circuit, overheating, and undervoltage. All this increases the safety and stability of the system in various conditions. Low power consumption in standby mode The EMT750 is designed for high energy efficiency, even in standby mode. The system's power consumption in standby mode is less than 0.5 W, which reduces unnecessary consumption. This solution minimizes energy loss, supports energy-efficient computer operation, and promotes long-term, stable power supply operation. Wide compatibility The power supply has a non-modular design with flat cables, which facilitates cable management and improves airflow inside the case. The unit offers 20+4-pin connectors for the motherboard, 8-pin (4+4) connectors for the processor, 6+2-pin PCI-E connectors for graphics cards, and SATA and IDE connectors for powering drives. The EMT750 model is fully compatible with modern Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards – it will also work well in configurations with multiple GPUs. What's more, thanks to its small dimensions (140 × 150 × 86 mm), the power supply fits into most PC cases.

Darkflash DG360 CPU Cooler (Black)The DarkFlash DG360 is an all-in-one liquid cooler that combines performance with easy installation and tidy cable management. The design features a water block with a copper base, an aluminum radiator, 400 mm IIR + EPDM tubing, and three 120 mm fans integrated into a single module. The system supports select Intel and AMD processors, and the pump, operating at approximately 600–3000 RPM, helps maintain a stable temperature even under heavy load. The whole setup is complemented by striking ARGB lighting.Water block with a copper base and lightingThe water block stands out with its striking, colorful lighting, which fits well with modern computers. The ability to rotate the head ensures that the visual effect remains consistent regardless of the component layout inside the case. The copper base effectively dissipates heat from the processor, while the plastic housing helps maintain a lightweight and aesthetically pleasing design.Stable cooling even under heavy loadThe DG360 is designed to work with high-performance Intel and AMD processors, making it ideal for gaming PCs and systems handling demanding workloads. The pump, operating at 600–3000 RPM, ensures efficient fluid circulation, and its noise level is only about 15 dBA, helping to maintain a quiet operating environment. Additionally, the high-density aluminum heatsink increases the heat dissipation surface area, helping maintain stable temperatures during long gaming sessions, rendering, or multitasking.Integrated 3-in-1 fan moduleThree fans have been integrated into a single module and factory-attached to the heatsink, simplifying installation and improving the appearance of the computer’s interior. They offer airflow of up to 81.5 CFM and static pressure of up to 2.3 mmH₂O, and feature durable hydraulic bearings with a lifespan of up to 40,000 hours. An additional advantage is their quiet operation—the maximum noise level is only about 36 dBA. Added to this is the PWM function, which automatically adjusts fan speed to CPU temperature within a range of 600 to 1800 RPM.ARGB Synchronization and Single CableThe cooler enables ARGB synchronization with the latest motherboards—it supports, among others, ASUS Aura Sync, ASRock Polychrome Sync, and RGB Fusion 2.0. Connection is via a 5V 3-pin ARGB connector. Additionally, a single cable with a 5V 3-pin ARGB and 4-pin PWM connector simplifies installation, reduces cable clutter inside the case, and helps prevent mistakes.Durable tubing and refined designThe tubing, made of IIR + EPDM, ensures good wear resistance and supports long-term, stable system operation. It is also distinguished by its distinctive braiding, which improves aesthetics and durability. The kit also includes thermal paste and mounting accessories, making it easy to prepare the cooling system for installation and achieve a clean, professional finish.Included Radiator and pump 3 x 120 mm fans User manual Set of mounting screws Accessory kit Thermal paste Manufacturer DarkFlash Model DG360 Color Black Water block dimensions 84.5 × 70 × 47.2 mm Water block material Block – copper, housing – plastic TDP 320 W Pump speed 600–3000 ±10% RPM Pump voltage DC 12 V Pump noise level 15 dBA Heat sink material High-density aluminum Water reservoir dimensions 394 × 120 × 27 mm Hoses Weaving slide hoses Cable length 400 mm Fan dimensions 120 × 120 × 25.4 mm (3 pcs.) Bearing Hydraulic Speed control PWM Fan speed 600–1800 ±10% RPM Maximum fan noise level 36 dBA Maximum airflow 81.5 CFM Maximum static pressure 2.3 mmH₂O Fan lifespan Up to 40,000 hours Intel compatibility LGA 1200 / 115x / 1700 / 18xx AMD compatibility AM5 / AM4

Darkflash DG360 CPU Cooler (White)The DarkFlash DG360 is an all-in-one liquid cooler that combines performance with easy installation and tidy cable management. The design features a water block with a copper base, an aluminum radiator, 400 mm IIR + EPDM tubing, and three 120 mm fans integrated into a single module. The system supports select Intel and AMD processors, and the pump, operating at approximately 600–3000 RPM, helps maintain a stable temperature even under heavy load. The whole setup is complemented by striking ARGB lighting.Water block with a copper base and lightingThe water block stands out with its striking, colorful lighting, which fits well with modern computers. The ability to rotate the head ensures that the visual effect remains consistent regardless of the component layout inside the case. The copper base effectively dissipates heat from the CPU, while the plastic housing helps maintain a lightweight and aesthetically pleasing design.Stable cooling even under heavy loadThe DG360 is designed to work with high-performance Intel and AMD processors, making it ideal for gaming PCs and systems handling demanding tasks. The pump, operating at 600–3000 RPM, ensures efficient fluid circulation, and its noise level is only about 15 dBA, helping to maintain a quiet system. Additionally, the high-density aluminum heatsink increases the heat dissipation surface area, helping maintain stable temperatures during long gaming sessions, rendering, or multitasking.Integrated 3-in-1 fan moduleThree fans have been integrated into a single module and factory-attached to the heatsink, simplifying installation and improving the appearance of the computer’s interior. They offer airflow of up to 81.5 CFM and static pressure of up to 2.3 mmH₂O, and they also feature durable hydraulic bearings and boast a lifespan of up to 40,000 hours. An additional advantage is their quiet operation—the maximum noise level is only about 36 dBA. Added to this is the PWM function, which automatically adjusts fan speed to CPU temperature within a range of 600 to 1800 RPM.ARGB Synchronization and Single CableThe cooler enables ARGB synchronization with the latest motherboards—it supports, among others, ASUS Aura Sync, ASRock Polychrome Sync, and RGB Fusion 2.0. Connection is via a 5V 3-pin ARGB connector. Additionally, a single cable with a 5V 3-pin ARGB and 4-pin PWM connector simplifies installation, reduces cable clutter inside the case, and helps prevent mistakes.Durable tubing and refined designThe tubing, made of IIR + EPDM, ensures good wear resistance and supports long-term, stable system operation. It is also distinguished by its distinctive braiding, which improves aesthetics and durability. The kit also includes thermal paste and mounting accessories, making it easy to prepare the cooling system for installation and achieve a clean, professional finish.Included Radiator and pump 3 x 120 mm fans User manual Set of mounting screws Accessory kit Thermal paste Manufacturer DarkFlash Model DG360 Color White Water block dimensions 84.5 × 70 × 47.2 mm Water block material Block – copper, housing – plastic TDP 320 W Pump speed 600–3000 ±10% RPM Pump voltage DC 12 V Pump noise level 15 dBA Heat sink material High-density aluminum Water reservoir dimensions 394 × 120 × 27 mm Hoses Weaving slide hoses Cable length 400 mm Fan dimensions 120 × 120 × 25.4 mm (3 pcs.) Bearing Hydraulic Speed control PWM Fan speed 600–1800 ±10% RPM Maximum fan noise level 36 dBA Maximum airflow 81.5 CFM Maximum static pressure 2.3 mmH₂O Fan lifespan Up to 40,000 hours Intel compatibility LGA 1200 / 115x / 1700 / 18xx AMD compatibility AM5 / AM4

DarkFlash EMT850 computer power supply (black) The DarkFlash EMT850 power supply is a unit with a total power of 850 W, designed in the ATX standard (140 × 150 × 86 mm). The single +12 V line design delivers up to 70 A, making it suitable for the latest processors and graphics cards. In addition, the 80 PLUS Bronze certification confirms high energy efficiency of up to 87.03%. This reduces energy loss and ensures stable operation under load. Single +12 V rail and DC-to-DC conversion The use of a single +12 V rail with DC-to-DC conversion allows up to 98% of the available power to be delivered to the most important components of the system. This system converts +5 V and +3.3 V voltages directly from the +12 V line, ensuring high stability and low fluctuations even under variable loads. This solution promotes the reliable operation of modern processors and graphics cards with high energy requirements. High efficiency and 80 PLUS Bronze certification 80 PLUS Bronze certification guarantees high energy efficiency at typical load levels. Efficiency of up to 87.03% means less energy loss converted into heat, which translates into more stable operation of the entire system. This characteristic also helps to reduce power consumption and maintain appropriate power supply parameters during intensive computer operation. Active PFC and power stability The power supply is equipped with an active PFC system with up to 98% efficiency, which improves the power factor and increases the energy efficiency of the entire unit. This solution reduces energy losses, limits heat generation, and reduces electromagnetic interference. As a result, the power supply provides stable power to all computer components. High-quality components and Japanese capacitors Japanese electrolytic capacitors with an operating temperature of up to 105°C are used inside the power supply. High-quality components and a solid internal design ensure stable operation and reliability even under long-term load. In addition, the use of switching transformers, EMI filters, and heat sinks that limit heating supports the safe and efficient operation of the unit. Quiet and intelligent cooling A 120 mm fan with FDB (Fluid Dynamic Bearing) is responsible for cooling the power supply, which is characterized by low noise and high durability. An intelligent temperature control system automatically adjusts its speed to the current load. In addition, there are honeycomb ventilation holes at the rear of the device and longitudinal holes at the front – this solution increases the heat dissipation surface and allows for efficient air flow. Comprehensive system protection The DarkFlash EMT850 is equipped with a 6-level protection system that protects both the power supply and computer components. It includes protection against overvoltage, overload, overcurrent, short circuit, overheating, and undervoltage. All this increases the safety and stability of the system in various conditions. Low power consumption in standby mode The EMT850 is designed for high energy efficiency, even in standby mode. The system's power consumption in standby mode is less than 0.5 W, which reduces unnecessary consumption. This solution minimizes energy loss, supports energy-efficient computer operation, and promotes long-term, stable power supply operation. Wide compatibility The power supply has a non-modular design with flat cables, which facilitates cable management and improves airflow inside the case. The unit offers 20+4-pin connectors for the motherboard, 8-pin (4+4) connectors for the processor, 6+2-pin PCI-E connectors for graphics cards, and SATA and IDE connectors for powering drives. The EMT850 model is fully compatible with modern Intel and AMD processors, as well as NVIDIA and AMD Radeon graphics cards – it will also work well in configurations with multiple GPUs. What's more, thanks to its small dimensions (140 × 150 × 86 mm), the power supply fits into most PC cases.