RS 3 Pro

Ergonomic silicone support pad facilitates gimbal shooting. Compatible with DJI RS 3 / RS 3 Pro / RS 2, installed on the bottom of the stabilizer via 1/4"-20 screws

SmallRig Half Cage for Sony A6700 / A6600 / A6500 / A6400 4337 is designed to attach accessories and protect the camera. It secures the camera in two-point firmly via one 1/4"-20 screw on the bottom and one M2.5 screw on the left side. Lightweight and portable, the easy-to-use half cage gives full access to dials and buttons, with built-in cushions preventing scratches. There are multiple mounting points for accessories, including 1/4"-20 holes and ARRI 3/8"-16 locating holes for Top Handle 3765, Side Handle 2913; one top ARRI 3/8"-16 locating hole for Monitor Mount 2903B; cold shoes for microphone, LED video light; a NATO rail for Rotating NATO Handle (Left Side) 3260; and a bottom QD socket for attaching shoulder straps. The Arca-Swiss quick-release plate on the bottom supports DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals as well as DJI RS 2 / RSC 2 gimbals’ quick-release plate and Arca-Type Quick Release Plate 3154. The cage also reserves a wrist strap hole at the bottom, compatible with Hand Strap 3848. Besides, a magnetic Allen wrench is included for easy disassembly and assembly. 1. Lightweight, easy-to-use, half-cage design for enhanced and convenient handgrip experience.2. Two-point locks the camera via one 1/4"-20 screw on the bottom and one M2.5 screw on the left side.3. Arca Swiss quick-release plate on the bottom for fast switching between tripod and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals.4. Comes with multiple mounting points like 1/4"-20 threaded hole, ARRI 3/8"-16 locating hole, cold shoe, and QD mount for handle, microphone, LED video light, monitor, etc. Note:1. Please remove the strap ring on the left side of the camera before installing this half cage. Please refer to the user manual for installation.2. Incompatible with Sony HVL-F32M and ECM-W2BT when mounted onto Sony Alpha 6600 / 6500 / 6400. Compatible WithSony A6700Sony A6600Sony A6500Sony A6400 Half Cage x 1User Manual x 1 Product Dimensions: 94 x 91 x 53.8mm / 3.7 x 3.6 x 2.1inPackage Dimensions: 137 x 104 x 51.5mm / 5.4 x 4.1 x 2inProduct Weight: 104±5g / 3.7±0.2ozPackage Weight: 146±5g / 5.2±0.2ozMaterial(s): Aluminum Alloy, Stainless Steel

Designed for DJI RS, RS 2, RSC 2, RS 3, RS 3 Pro, RS 4, RS 4 Pro, and RS 5 gimbals. It allows Arca-type plates, cages, and L-brackets to be mounted directly to the gimbal for fast switching between tripod and gimbal setups, helping reduce setup time.

Crafted to seamlessly integrate with DJI RS 2 / RSC 2 / RS3 / RS 3 Pro / RS 3 mini / RS 4 / RS 4 Pro stabilizers. Tailored for expanding your stabilizer capabilities, this monitor support accommodates a range of photography equipment, including monitors, lights, microphones, image transmitters, and action cameras.

SmallRig 4231 L-Shape Mount Plate for Fujifilm X-S20 Locking FUJIFILM X-S20 via one 1/4"-20 screw at the bottom, the mounting plate comes with rubber pads that prevent scratches, and a hinge arm at the battery door that fits the camera curve for comfortable grip. This L-Shap grip have a Arca Swiss bottom plate and side plate. The bottom plate, which are Arca Swiss quick-release plate, fits for Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals and have 1/4"-20 threaded holes to support SmallRig Side Handle 2093 & 3847 in vertical shooting, and Quick Release Plate 1280 Strap holes for SmallRig Hand Strap 3848 & 2456 , and built-in QD mounts on the bottom for QD strap buckle. On the side plate, there are 1/4"-20 threaded holes for SmallRig Cold Shoe Mount 2736 for the microphone. The side plate supports SmallRig HDMI Cable Clamp 1693 for stable data transmission and also can be stretched 22mm to allow cables during vertical shooting. It can also adjust back and forth by 7.8mm to enable a 180-degree opening and 120-degree rotation of the LCD flip screen. Besides, a magnetic Allen wrench is included for easy disassembly and assembly. Compability: FUJIFILM X-S20 Package includes: 1x L-Shape Mount Plate

The Falcam F38 Quick Release Kit V2 for DJI RS Series is a lightweight aluminum quick-release system designed to streamline your gimbal workflow. Featuring a Manfrotto-compatible base and F38 quick release top plate, it enables fast transitions between DJI RS-series gimbals and tripod systems. The sliding plate design allows quick rebalancing and supports OEM lens mounts, while Lock Mode provides added security during operation. Enhance your DJI RS gimbal setup with the Falcam F38 Quick Release Kit V2. Designed for creators who frequently switch between handheld stabilization and tripod support, this quick-release system provides a fast and efficient workflow while maintaining secure camera mounting and precise balance adjustments. The kit includes an F38 quick release base and top plate, allowing seamless transitions between compatible DJI RS-series gimbals and Manfrotto-style tripod systems. Its extended plate design accommodates OEM lens support mounts and enables quick slide rebalancing for optimal camera balance. An integrated Lock Mode helps prevent accidental plate release, ensuring secure operation during demanding shoots. Constructed from durable aluminum alloy, the compact and lightweight design adds minimal weight to your setup while delivering reliable performance for professional videography and content creation. Key Features F38 Quick Release Base designed for DJI RS Series gimbals. Manfrotto-compatible base for fast switching between gimbal and tripod systems. Includes F38 Quick Release Top Plate. Compatible with OEM lens support mounts. Quick slide rebalancing for easy camera balance adjustment. Lock Mode helps prevent accidental release. Lightweight and durable aluminum construction. Compact design ideal for professional and mobile workflows. Falcam F38 Quick Release Base for DJI RS Series F38 Quick Release Top Plate Product Type: Quick Release Kit Compatibility: DJI RS 5, DJI RS 4, DJI RS 4 Pro, DJI RS 3, DJI RS 3 Pro, DJI RS 2, DJI RSC 2 Quick Release System: Falcam F38 Base Type: Manfrotto-compatible base Camera Mount: F38 Quick Release Plate with built-in 1/4"-20 male screw Lens Support Compatibility: Compatible with OEM lens mounts/supports Balance Adjustment: Quick slide rebalancing Safety Feature: Lock Mode to prevent accidental plate release Adjustment Type: Sliding adjustment Material: Aluminum Color: Black Dimensions: 5.1 × 2 × 1 in (129.8 × 49.8 × 26.6 mm) Weight: 3.9 oz (110 g)

SmallRig L-Bracket for Nikon Z 8 3942 is designed to facilitate a switch between horizontal and vertical modes and to improve grip experience. It locks the camera via one 1/4 "-20 screw at the bottom and one locating pin, with rub pads preventing scratches, and has a hinge arm at the battery door that fits the camera curve to enhance grip. There are multiple accessory mounts: an Arca Swiss quick-release plate for Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals, 1/4"-20 & 3/8"-16 threaded holes at the bottom that support Side Handle 2093 & 3847, Quick Release Plate 1280, and strap holes for Hand Strap 3848 & 2456. The L-Bracket also features a QD mount to attach the QD strap buckle, 1/4"-20 threaded holes, suitable for Cold Shoe Mount BUC2736 for the microphone, as well as a 23mm stretchable side plate that allows cables through in vertical shooting. Besides, a magnetic wrench is included for easy disassembly and assembly. 1. Arca-Swiss quick-release bottom plate and side plate for quick switch between horizontal and vertical modes on a tripod. 2. Hinged arm at the battery door fits the camera curve and enhances the grip experience. 3. Arca-Swiss quick-release plate supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals. 4. Multiple mounting points: 1/4"-20 threaded hole, 3/8"-16 threaded hole, QD mount, for brilliant expandability. 5. A stretchable side plate allows cables through in vertical shooting. Compatible with Nikon Z 8 L-Shape Mount Plate x 1 Allen Wrench x 1 Product Dimensions: 153.2 x 100.2 x 63.5mm Package Dimensions: 180.0 x 129.5 x 75.0mm Product Weight: 132.0 ± 5.0g Package Weight: 212.5 ± 5.0g Material(s): Aluminum Alloy

SmallRig Camera Cage for Nikon Z f 4261 is designed to protect the camera, attach accessories, and improve grip. It locks Nikon Z f via one 1/4“-20 screw on the bottom and one M2.5 screw on the right, with rubber pads preventing scratches. The cage comes with an ebony handle, ergonomically designed for comfortable grip and texture, and maintains full access to buttons, card slots, a flip screen, and a battery door. On the top, it shares elements and usage experience with Nikon Z f. Just press to control the dial. Among its mounting points, 1/4"-20 threaded hole, 3/8"-16 threaded hole, ARRI 3/8"-16 locating hole and cold shoe support Side Handle 2093C / 4016 / 3847, Top Handle 3765, Monitor Mount 2903 / 2904, mini V Mount Battery Plate 2987, Single Rod Clamp 3598, Magic Arm 3873, Microphone 3468, LED Video Light 4055, etc. Besides, there are strap holes for Hand Strap 3848 / 3926, Neck Strap 3485, QD mounts for Shoulder Strap 4118, and a bottom Arca Swiss quick-release plate for Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals for quick switch between gimbal, handheld and tripod modes. A double-ended wrench is also included for easy accessory disassembly and assembly.

SmallRig Sling rokturis DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro / RS 3 mini 3028ir izstrādāts, lai samazinātu rokas nogurumu fotografēšanas zema leņķa laikā, un piedāvā daudz piederumu stiprināšanas iespēju.

SmallRig 4949 HawkLock Quick Release Cage Kit for Sony ZV-E10 II The patented HawkLock quick release system includes cold shoe mounts, NATO rails, and Arca-Swiss quick-release plate, facilitating smooth sliding and self-locking when paired with HawkLock ecosystem accessories.The three-point locking system securely fixes the cage to the camera with a bottom locating pin, 1/4"-20 screw, and M2.5 screw on the left side to prevent any deviation, while the all-around padding prevents scratches on the camera. The battery compartment features a hinged door that conforms better to the curves of the camera body, solving the issue of where to place the little finger and enhancing the grip.The HDMI cable clamp mounts on the left side of the cage with a thumbscrew, allowing for convenient installation and removal of cables with a simple twist, ensuring the protection of the camera's HDMI port and stable signal transmission.The cage features multiple 1/4"-20 threaded holes, ARRI locating holes for attaching accessories such as SmallRig Top handle 2165 and side handle 4755 , assisting with handheld shooting. The top ARRI locating hole enables the installation of a monitor with the SmallRig Monitor mount 2903 . Additionally, it includes a built-in cold shoe mount for attaching microphones, lights, and other accessories.The bottom of the cage is equipped with a 1/4"-20 threaded hole for mounting a mini tripod and is compatible with the DJI RS Mini quick release plate, facilitating camera stabilization. An integrated Arca-Swiss quick release plate accommodates Arca-type tripods and DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro / RS 4 / RS 4 Pro gimbals, allowing seamless transitions between handheld, gimbal, and tripod shooting scenarios.The cage also features strap holes on the sides and bottom for attaching accessories such as SmallRig Wrist strap 3848 and shoulder strap 2428 , while the integrated QD holes are compatible with QD shoulder straps.To enhance convenience, the kit is equipped with a built-in magnetic Allen wrench at its base, ensuring quick access and facilitating easy assembly and disassembly. Compability: Sony ZV-E10 II Packaging includes: Cage with Silicone Grip HDMI Cable Clamp

SmallRig 4336 Cage Kit for Sony A6700 The cage secures the camera firm via one 1/4"-20 screw on the bottom and one M2.5 screw on the right side, with built-in cushions preventing scratches. Its hinge arm at the battery door better fits the camera curve and leaves room for the pinkie for more comfort. The HDMI cable clamp quickly attaches to the left side of the cage by using a thumb screw, protecting the HDMI port and ensuring stable transmission. Comes with multiple mounting points for attaching accessories including 1/4"-20 threaded holes and ARRI 3/8"-16 locating holes for SmallRig Top Handle 3765 , Side Handle 2913 one top ARRI 3/8"-16 locating hole for SmallRig Monitor Mount 2903 cold shoes for microphone, LED video light a NATO rail for SmallRig Rotating NATO Handle (Left Side) 3260 and a bottom QD socket for mounting shoulder straps. The Arca Swiss quick-release plate on the bottom supports DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals as well as DJI RS 2 / RSC 2 gimbals’ quick-release plate and SmallRig Arca-Type Quick Release Plate 3154 . The cage also reserves holes on both sides and the bottom for attaching accessories like SmallRig Hand Strap 3848 , Shoulder Strap 2428 , etc. Besides, a magnetic Allen wrench is included for easy disassembly and assembly. Compatibility: Sony Alpha 6700 Packaging including: 1x Cage 1x HDMI Cable Clamp 1x User Manual