Samsung Bluetooth

Shelly Flood Gen4 WiFi/Zigbee flood sensorThe Shelly Flood Gen4 is a flood sensor that detects water exactly when it occurs - under the dishwasher, washing machine, boiler or in the basement. With a long-range detection cable, built-in sounder and instant notifications, it helps avoid costly damage, and its compatibility with platforms such as Apple HomeKit, Google Home and Home Assistant makes it easy to integrate into your existing smart home system. In addition, battery power and IP44 rating allow installation in areas without access to an outlet and with high humidity.Flood Detection and Rain Detection modesThe device offers two modes of operation, so you can easily match it to your specific application. Flood Detection is designed for critical areas - as soon as the sensor detects water on the line, it immediately sets off an alarm, which works well under the washing machine, dishwasher, boiler or in the basement. Rain Detection works more subtly: it registers the rising level of moisture on a surface, but does not generate an alarm, which works well, for example, on terraces or under canopies. In this mode, the device reacts to the first signs of precipitation, helping to protect outdoor equipment and furnishings.Precise detection cable for small and large spacesThe 2-meter-long flood detection cable provides a much longer range than a standard point sensor. It allows you to cover hard-to-reach areas with monitoring, and its linear design is particularly well suited for long stretches of pipes, built-in furniture or extensive utility rooms. If necessary, you can connect its successive sections, reaching a total length of up to 150 m, making it possible to protect large areas or several points at once.Wi-Fi, Bluetooth, Zigbee and Matter connectivityThe Shelly Flood Gen4 sensor works with various communication protocols (Bluetooth, Wi-Fi, Zigbee) and is compatible with the Matter standard, allowing flexible integration with virtually any home automation system. You can easily connect it to Apple HomeKit, Google Home, Home Assistant, Samsung SmartThings or Amazon Alexa - manage all your devices from a single app!Three alarm styles for different operating scenariosThe Shelly Flood Gen4 has a built-in beeper that emits a long notification when flooding is detected and short beeps when the battery is low. The sensor also offers three alarm modes that allow you to customize leak notification to your site. Intense provides fast and clear signaling, Normal works well for everyday use, while Economic reduces power consumption, which is especially useful in summer houses, garages or other infrequently visited facilities.Battery power and freedom of installationThe device is powered by four AA 1.5V batteries, which you'll find included. It does not require any wiring and can be placed where there is no access to an outlet - for example, under kitchen cabinets, in cabinets, near pipes or in utility rooms. In addition, the device is IP44-rated, which means it is resistant to moisture and splashes. As a result, the sensor will work well not only indoors, but also in semi-open spaces, such as terraces or spaces under a canopy.Note: do not expose the device directly to rain - the main module should be shielded, and the exposure is only to the detection cable.Local automation and cooperation with external devicesThe Flood Gen4 sensor supports local operating scenarios, making it possible, among other things, to automatically shut down equipment when water is detected. Integration with additional Shelly modules and third-party equipment allows you to create functional security features tailored to your room or system.Control via app and built-in web interfaceThe Flood Gen4 can be operated using the Shelly Smart Control app and Shelly Cloud service, which allows remote access to the device from anywhere. In addition, it features a built-in web interface that makes it easy to configure, monitor and customize settings. No matter how you work,

Yeelight Smart Cube Light Spot Gaming Panel - BaseDo you dream of beautiful lighting for your room? However, do you care about an original solution? Yeelight can provide you with it! The light panels, which you can freely set on a dedicated base, will allow you to create a beautiful light and atmospheric atmosphere to suit the situation. They come in 3 different forms - in this offer you will find one gaming panel Smart Cube Light Spot, which will give the whole thing an amazing character. NOTE: it will work when combined with the dedicated base you will find in the set. Together with Yeelight you will stimulate your imagination, because it is more than just lighting!Perfect lighting for your standThe Smart Cube Light Spot gaming panel is distinguished by its wide 15° beam, thanks to which it creates a spotlight effect, and you will be able to beautifully highlight the things above it. What's more, you can also freely adjust it horizontally by 350°, as well as vertically by 90°, so you can illuminate your wall in any way you want. In addition, managing the lighting will make it easy for you to use the control button on the cube, and the matte finish adds to its elegance. Many possibilitiesThe Yeelight panels will let your imagination run wild, as you can create a variety of light combinations with them. When integrated with Razer Chroma and Overwolf, they can adjust to the mood and activity on the screen in real time, which will make them give the perfect ambience while playing games. In addition, the ARGB cube will dynamically reflect the monitor's colors, so it will bring the highlights beyond the screen as well. With the Yeelight panels, you will transform your favorite songs into stunning light shows, as they will move to the rhythm of the music! Stimulate your imagination With Yeelight you will stimulate your imagination! You can freely combine the panels with each other to create versatile sets. You can put as many as 6 of them on a single base, so the fun with lighting will never end! Smart Cube Light Matrix has the ability to create emoji, letters, as well as many other interesting elements! In addition, you can easily design it to form a clock. Yeelights are more than just lights - you can personalize your room with them! Easy controlYeelight panels are built with user comfort in mind, so they will work regardless of system - they are suitable equally for Android and iOS. They also show compatibility with Matter. You can easily connect them with apps such as Apple HomeKit, Google Assistant, Amazon Alexa, Yandex Alice or Samsung SmartThings. With Yeelight, you can forget about connectivity problems! Starting today, you can enjoy light that matches all smart platforms. In addition, the Yeelight Statio PC app will help you immerse yourself in dynamic, smooth colors and enable you to enjoy entertainment at the highest level!In the set Smart Cube Light Spot gaming panel base power supply controller user manual Manufacturer Yeelight Model YLFWD-0008 Rated input power 100-240V~50/60Hz, 0.17A Dimensions 75 × 75 × 75 mm Compatible systems Android 7.0 and iOS 16.2 and higher Maximum number of connected cubes 6 Wireless connection Wi-Fi IEEE 802.11 b/g/n 2.4 GHz, Bluetooth 5.0 , Yeelight Świetlny panel gamingowy Smart Cube Light Spot - BazaMarzysz o pięknym oświetleniu swojego pokoju? Zależy Ci jednak na niebanalnym rozwiązaniu? Yeelight może Ci to zapewnić! Panele świetlne, które możesz dowolnie ustawiać na dedykowanej bazie, umożliwią stworzenie pięknego światła i klimatycznej atmosfery, dopasowanej do sytuacji. Występują one w 3 różnych formach — w tej ofercie znajdziesz jeden panel gamingowy Smart Cube Light Spot, który nada całości niesamowitego charakteru. UWAGA: będzie działać po połączeniu z dedykowaną bazą, którą znajdziesz w zestawie. Wraz z Yeelight pobudzisz swoją wyobraźnię, ponieważ to coś więcej, niż tylko oświetlenie!Doskonałe oświetlenie stanowiskaPanel gamingowy Smart Cube Light Spot wyróżnia się szeroką, 15° w

Shelly Dimmer 0/1-10V PM Gen4The Shelly Dimmer 0/1–10V PM Gen4 is a smart dimmer designed for devices that use the 0–10 V and 1–10 V standards, such as LED lighting, motors, and valves. It enables smooth brightness control, energy consumption monitoring, and remote control via an app, a smart home system, or traditional wall switches. With support for Wi-Fi, Zigbee, Bluetooth, and Matter, it easily integrates with modern automation ecosystems, and installation behind an existing switch allows you to modernize your system without altering the room’s appearance. This versatile solution is ideal for homes, offices, hotels, and commercial spaces, providing convenience, energy savings, and full control over lighting.Smart control without replacing the wiringThe Shelly Dimmer 0/1–10V PM Gen4 is designed to modernize existing lighting systems. The module is mounted behind your existing wall switch, allowing you to keep your current hardware while gaining smart control features. It supports both single-button and dual-button control, allowing you to conveniently brighten and dim the lights without changing how you use the system.Full control over lighting and ambianceThe device is compatible with devices equipped with 0–10 V and 1–10 V control inputs, making it suitable not only for LED lighting but also for motor and valve control systems. You can precisely set the minimum and maximum brightness levels, adjust the speed of transitions between lighting levels, and decide how bright the light should be when turned on. Night Mode automatically reduces brightness during selected hours, providing soft lighting in the bedroom, children’s room, or hallway without causing glare.Smart automation tailored to your daily rhythmThe 0/1–10V PM Gen4 dimmer lets you create complex automation scenarios that eliminate the need for manual lighting control. You can schedule weekly and annual routines, synchronize lighting with sunrise and sunset, use automatic on/off timers, and create your own scripts tailored to your individual needs. The device also supports Webhooks, MQTT, HTTP, HTTPS, UDP, and KNXnet/IP communication, allowing it to seamlessly integrate with advanced building automation systems.Multi-protocol communication and broad compatibilityThe modern Shelly ESP32-C6 chip ensures high performance and stable operation. The module simultaneously supports Wi-Fi, Zigbee, Bluetooth, and Matter, allowing it to be integrated with the most popular smart home platforms, such as Google Home, Amazon Alexa, Samsung SmartThings, and Home Assistant. The built-in Wi-Fi and Zigbee signal booster helps extend network range, and the Bluetooth Low Energy (BLE) gateway feature enables communication between Bluetooth and Wi-Fi devices, facilitating the expansion of the entire smart home ecosystem.Energy Consumption Monitoring and Greater EfficiencyThe built-in measurement module continuously monitors the voltage, current, and power consumption of connected devices. This allows you to track energy consumption in real time, identify inefficient systems, and more easily optimize operating costs. Automatically dimming lights during the day or adjusting their brightness to suit ambient conditions helps reduce energy consumption.Safe Operation and Wide Range of ApplicationsThe Shelly Dimmer 0/1–10V PM Gen4 is equipped with protections against overheating, overload, overvoltage, and excessive current draw, which enhances the safety of the entire system. The device is suitable for use in homes and apartments, as well as in hotels, restaurants, cafes, offices, conference rooms, and cultural venues.Included in the set: Dimmer Matter QR code User manual General Manufacturer Shelly Model Dimmer 0/1-10V PM G4 Physical Specifications Dimensions (H × W × D) 38.5 × 43.5 × 17 mm Weight 28.5 g Maximum tightening torque for screw terminals 0.4 Nm Wire cross-section 0.2–2.5 mm² (single-strand, multi-strand, and ferrule-terminated wires) Stripped wire length 5–6 mm Installation In a j

WIFI Shelly H&T gen3 temp and humidity sensor (Flesh)The Shelly H&T Gen3 is a smart humidity and temperature sensor that allows you to monitor atmospheric conditions in your environment. Thanks to its versatility and easy operation, you can track humidity and temperature with convenience and precision. See what else it can offer you!Seamless connectionThe device can be connected to your home's Wi-Fi network, allowing you to remotely monitor humidity and temperature data via a smartphone app or other compatible devices. No matter where you are, you have access to up-to-date information. What's more, the Shelly H&T Gen3 supports not only Wi-Fi protocol (802.11 b/g/n), but also Bluetooth 4.2, so you can be sure it maintains a stable connection and sends data exactly where you need it.Thoughtful designThe sensor is equipped with a large e-paper display, which ensures readability of humidity and temperature data. It makes reading the information simpler and more intuitive. The Shelly H&T Gen3 works perfectly with popular smart home platforms such as Google, Alexa and Samsung SmartThings. This means you can control it by voice and create automations to make your life easier.Easy powerThe Shelly H&T Gen3 is a smart solution for monitoring humidity and temperature in a variety of environments, such as apartments, offices, and colleges. Its versatility and integration with smart home systems make it a convenient tool for monitoring atmospheric conditions. The device can be powered in several ways. You can use 4 AA batteries (not included) or connect it via a USB Type-C port. This gives you flexibility in your choice of power source.Adapted to different conditionsThe sensor is designed to work in a variety of conditions. It works in temperatures from 0°C to 40°C (32°F to 105°F) and in humidity from 30% to 70% RH. No matter where you place it, it will work effectively. All this makes it a reliable gadget for the home. Manufacturer Shelly Model H&Tgen3Ivory Dimensions 70x70x26 mm (without base); 70x70x45 mm (with base). Weight 47 g Mounting With stand (on a horizontal surface); Mounting on the wall (using screws with a head diameter of 5-7 mm and a maximum thread diameter of 3 mm or double-sided foam sticker) Shell material Plastic Ambient temperature during operation 0°C to 40°C / 32°F to 105°F Humidity 30% to 70% relative humidity Max altitude 2000 m Power supply Batteries Battery Type: 4 AA (LR6) 1.5 V (not included) Estimated battery life approx. 1 year (depending on batteries used, temperature and humidity changes and strength of network connection) Power supply, USB Type C (power adapter and cable not included) Internal temperature sensor NO Temperature sensor Yes Humidity sensor Yes Protocol Wi-Fi 802.11 b/g/n Range Up to 30 m / 100 feet indoors and 50 m / 160 feet outdoors (depending on local conditions) Bluetooth protocol 4.2 Range Up to 10 m indoors and 30 m outdoors (depending on local conditions) Processor ESP-Shelly-C38F Memory 8 MB

Set of 2 Shelly 1 Mini Gen4 Zigbee/Matter ControllersThe Shelly 1 Mini Gen4 is an advanced relay controller that, despite its small size (29 x 34 x 16 mm), supports multiple communication standards, including Wi-Fi, Zigbee, Bluetooth, and Matter. It can be installed in junction boxes, behind outlets, and in locations where installation space is limited. Thanks to its potential-free contacts, the device can be used in applications requiring galvanic isolation of circuits, such as controlling a gate, relay, doorbell, or automation system, regardless of their operating voltage. It also supports schedules, scenes, and scripts, and integrates with home automation systems such as Google Home, Alexa, and Samsung SmartThings. The set includes two units.Wide connectivity and Matter protocol compatibilityThe Shelly 1 Mini Gen4 controller offers communication via Wi-Fi (802.11 b/g/n), Zigbee (802.15.4), and Bluetooth 5.0. The device also functions as a BLE gateway and a Wi-Fi and Zigbee signal booster for other IoT devices. Thanks to its compatibility with the Matter protocol, it can be integrated into any ecosystem supporting this standard, which increases its versatility and simplifies setup in a variety of home environments.Dry contacts and operation with various voltagesAn advantage of the Shelly 1 Mini Gen4 is its ability to control both low-voltage (30 VDC) and mains-powered (up to 240 VAC) devices. Thanks to the presence of a dry contact, it can also be used in situations requiring an isolated relay, e.g., to control gates, doorbells, or lighting.Advanced scheduling and scene functionsThe Shelly 1 Mini Gen4 allows you to set up to 20 schedules, enabling you to plan the automatic turning on or off of devices at specific times on selected days of the week. Additionally, it supports the creation of scenes—sets of actions triggered simultaneously or sequentially in response to an event, such as turning on several devices upon motion detection. Schedules and scenes are configured using the Shelly Smart Control app, available for free on mobile devices and computers.Integrations and full local or remote controlThe device can be integrated not only with systems from major voice assistant manufacturers but also with local systems via HTTP/HTTPS, MQTT, Webhooks, or KNX net/IP. Shelly 1 Mini Gen4 operates both in local mode (without cloud access) and via the internet, allowing for full control regardless of the user’s location. The built-in web interface enables direct configuration from a browser.High installation flexibilityThe controller’s housing is made of plastic and allows for installation in electrical boxes. Despite its compact dimensions, the device houses an advanced ESP-Shelly-C68F microcontroller with 8 MB of flash memory, enabling real-time support for scripts and functions.Included Shelly controller x2 user manual General Manufacturer Shelly Model 1MiniGen4 Physical specifications Dimensions 29 x 34 x 16 ±0.5 mm / 1.34 x 1.11 x 0.63 ±0.02 in Weight 19 ±1 g / 0.65 ±0.04 oz Maximum tightening torque for screw terminals 0.4 Nm / 3.5 lbin Wire cross-section 0.2 to 2.5 mm² / 24 to 14 AWG (solid, stranded, and ferrule wires) Wire stripping length 6 to 7 mm / 0.24 to 0.28 in. Mounting Wall box Housing material Plastic Housing color Blue Connector color Gray Environmental conditions Operating temperature -20°C to 40°C / -5°F to 105°F Operating humidity 30% to 70% RH Maximum altitude 2000 m / 6562 ft Electrical parameters Power supply 110 - 240 VAC Relay Potential-free, NO contact, 1-pole, µ contact Power consumption < 1.2 W External protection Triggering characteristic B or C, rated current max. 10 A, breaking capacity min. 6 kA, energy limitation class 3 Output circuit parameters Maximum switching voltage 240 VAC / 30 VDC Maximum switching current 8 A / 240 VAC, 5 A / 30 VDC Maximum output power 2000 W / 240 VAC, 150 W / 30 VDC Surge protection None Overcurrent protection None Overpower protection None Sensors and measurements Inter

Hohem iSteady Q GimbalThe Hohem iSteady Q is a versatile gimbal that offers unparalleled stabilization, versatile features and a compact design that is ideal for any type of recording. Choose the Hohem iSteady Q and discover a new dimension of mobile photography and filming.Unparalleled quality in a compact form factorThe Hohem iSteady Q gimbal is an innovative device that redefines the concept of image stabilization for smartphones. This unique stabilizer combines advanced technology and ease of use so you can capture perfect shots in any situation. Made of high-quality materials such as PA, PC and ABS, it provides durability and lightness, making it the perfect companion for any trip.Light weight and performanceThe Hohem iSteady Q weighs just 195 grams and offers a maximum payload of up to 280 grams, making it compatible with many smartphone models, both iPhones and Android devices. With a built-in 460 mAh battery, you can enjoy up to 3 hours of use on a single charge. That's enough time to capture all your most important moments without having to worry about running out of power.Versatile features for perfect shotsThe Hohem iSteady Q offers a wide range of features that make it easy to create professional videos and photos. The 360° pan range and auto rotation functions (300° vertical and 360° horizontal) allow you to capture full panoramic views. In addition, automatic calibration ensures stable and smooth shots, regardless of conditions. With the ability to easily change between landscape and portrait orientations, you can freely switch between these formats, which is ideal for different types of content.Remote control and intuitive operationWith Hohem iSteady Q, your recording experience becomes even more convenient thanks to a remote control function based on 2.4G radio frequency, with a range of up to 10 meters. This solution allows you to precisely control the device away from your phone, opening up new creative possibilities. An intuitive power button allows for quick on/off, as well as easy switching between lock mode and first-person tracking mode.Full compatibility and ease of useThe Hohem iSteady Q gimbal is compatible with a wide range of smartphones, making it ideal for any user. Whether you're a professional content creator or an amateur looking to take your photography skills to the next level, this stabilizer is sure to meet your needs.Included gimbal USB-C cable carrying bag remote control user manual Manufacturer Hohem Model iSteady Q Dimensions 140 x 54 x 36 mm Maximum length (after expansion) 50cm Material PA6+30%GF, ABS Weight (together with battery) 195g Maximum load 280g Battery capacity 460 mAh Input 5V/1A Maximum operating current 500mA Voltage 3.7V Battery operating time 3 hours Charging time 45 minutes Bluetooth 3.0+4.0 Transmission 2.4G Remote control range 10m Mechanical range 360° panoramic mode, 360° rotation Operation modes Lock Mode, POV mode (first person perspective) Compatibility iPhone: 14/13/12/11 Pro max, XS MAX, XS, XR, X, Plus, 8, 7, 6, 6S; Android: Samsung, HUAWEI, XIAOMI Width of phones 55-90mm Operating temperature -10 to 45℃