Samsung Smart 32

Premium connection USB-C USB-C Data and Charging AXAGON BUCM3-CM10AB SPEED USB 3.2 Gen 1 cable with USB-C male connectors at both ends. The cable is designed for fast data transfers and notebook, phone, tablet and other mobile device charging. It supports up to 5 Gb/s data transfer and charging with current up to 3A.  Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Cable also supports notebook charging using Power Delivery 60W technology. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: 2x USB-C (M) male. Other Features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB - USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0). Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0. Supports 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed) transmission rates. Support for high-speed charging by current up to 3A. Supported charging technologies: Power Delivery 60W (20V/3A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for notebooks, mobile phones and smartphones, tablets, powerbanks and other mobile devices with USB-C connector. Other data: cable length 1 m, 4.5 mm outer diameter. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.

Premium connection USB-C USB-A Data and Charging AXAGON BUCM3-AM10AB SPEED USB 3.2 Gen 1 cable with USB-C male and USB-A male connectors. The cable is designed for fast data transfers and notebook, phone, tablet and other mobile devices. It supports up to 5 Gb/s data transfer and charging with current up to 3A.  Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male  USB-A (M) male  Other Features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB - USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0). Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0. Supports 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed) transmission rates. Support for high-speed charging by current up to 3A. Supported charging technologies: Qualcomm Quick Charge 2.0 / 3.0, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for mobile phones and smartphones, tablets, powerbanks and other mobile devices with USB-C connector. Other data: cable length 1 m, 4.5 mm outer diameter. Package contains: USB-C M USB-A M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.

Premium connection USB-C USB-A Data and Charging AXAGON BUCM3-AM15AB SPEED USB 3.2 Gen 1 cable with USB-C male and USB-A male connectors. The cable is designed for fast data transfers and notebook, phone, tablet and other mobile device charging. It supports up to 5 Gb/s data transfer and charging with current up to 3A.  Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: USB-C (M) male  USB-A (M) male  Other Features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB - USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0). Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0. Supports 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed) transmission rates. Support for high-speed charging by current up to 3A. Supported charging technologies: Qualcomm Quick Charge 2.0 / 3.0, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for mobile phones and smartphones, tablets, powerbanks and other mobile devices with USB-C connector. Other data: cable length 1.5 m, 4.5 mm outer diameter. Package contains: USB-C M USB-A M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.

Premium connection USB-C USB-C Data and Charging AXAGON BUCM3-CM15AB SPEED USB 3.2 Gen 1 cable with USB-C male connectors at both ends. The cable is designed for fast data transfers and notebook, phone, tablet and other mobile device charging. It supports up to 5 Gb/s data transfer and charging with current up to 3A.  Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Cable also supports notebook charging using Power Delivery 60W technology. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: 2x USB-C (M) male. Other Features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB - USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0). Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0. Supports 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed) transmission rates. Support for high-speed charging by current up to 3A. Supported charging technologies: Power Delivery 60W (20V/3A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for notebooks, mobile phones and smartphones, tablets, powerbanks and other mobile devices with USB-C connector. Other data: cable length 1.5 m, 4.5 mm outer diameter. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.

The compact wallcharger AXAGON ACU-PD20 enables fast charging of mobile devices. With 20W of maximum power, the charger charges phones, tablets and other mobile devices at the highest possible speed. The adapter offers a reversible USB-C connector. The charger is equipped with Power Delivery 3.0 / Quick Charge 4+ USB Type-C, enabling fast charging of smartphones and tablets with a power of up to 20W. The charger supports 20W PD charging for iPhone 12, 13, 14 and 15 and their Pro and Pro Max models. The adapter is also compatible with other fast phone charging standards such as Apple iPhone, iPad, Samsung, Huawei, Honor, Xiaomi. The advanced protection system at the charging adapter output protects the device being charged from damage. The charger function also detects the device being charged and selects the optimal charging speed and progress. The body of the power adapter has a pleasant shape and compact size. The combination of small dimensions and a wide range of input voltages, makes the charger an ideal travel helper. Input: input voltage AC 100V-240V / 1A / 50-60 Hz (WIV function) supports multiple national power standards two-pin euro plug - integrated in the body of the charger Output: USB-C port PD (tablets, phones) max. 20W: 5V/3A, 9V/2.22A, 12V/1.67A, PPS: 3-5V/3A, 3-11V/1A Charging technology: PD 3.0, PD 2.0, PPS, QC4+, QC 3.0, QC 2.0, AFC, FCP, SMART, Apple PD, Apple 2.4A Maximum power: maximum power 20W maximum current 3A  Supported charging technologies: Standard charging of all devices that support 5V and Apple iPhone 5, 6, SE, 7 charging.  SMART - charging max. 5V/3A, Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A) a Apple 2.4A (iPad). FCP - quick charging using Huawei Fast Charge Protocol. AFC - quick charging using Samsung Adaptive Fast Charging protocol. QC - quick charging using Qualcomm Quick Charge 2.0, Quick Charge 3.0 and Quick Charge 4+ protocol. PPS - quick charging using the Programmable Power Supply protocol (part of USB PD 3.0 and QC4+). PD - quick charging using USB Power Delivery 2.0 and Power Delivery 3.0 protocol. Examples of supported phones and tablets: PD - quick charging of Apple iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max phone. PD - quick charging (up to 20W) Apple iPhone 12, 12 Mini, 12 Pro, 12 Pro Max, 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 13 Pro, 13 Pro Max, 14, 14 Plus, 14 Pro, 14 Pro Max, 15, 15 Plus, 15 Pro, 15 Pro Max phones. PD - quick charging (up to 20W) iPad mini, iPad Air, iPad Pro and other tablets. The charger supports WIV, AIC and CC functions: Wide Input Voltage - function of a wide range of input voltage; it protects the adapter against undervoltage and overvoltage at the input and allows the use of more national power standards. Automatic Intelligent Communication - function of automatic recognition of the connected device to select optimal charging parameters. Constant Output Current - the current hold function prevents the output power fluctuations; this function ensures steady course of charging. Complex output protection: OCP, OVP, OTP, OSP:  Over Current Protection. Protection of output against current overload. Over Voltage Protection. Protection against overvoltage at the output. Over Temperature Protection. Protection against overheating of the adapter. Output Short Circuit protection. Short circuit protection at the output. Other features: dimensions of the charger body 84 x 36 x 32 mm including a plug, weight: 52 g, material: non-flammable plastic. Package contains: black wall charger, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

The compact wallcharger AXAGON ACU-PD20W enables fast charging of mobile devices. With 20W of maximum power, the charger charges phones, tablets and other mobile devices at the highest possible speed. The adapter offers a reversible USB-C connector. The charger is equipped with Power Delivery 3.0 / Quick Charge 4+ USB Type-C, enabling fast charging of smartphones and tablets with a power of up to 20W. The charger supports 20W PD charging for iPhone 12, 13, 14 and 15 and their Pro and Pro Max models. The adapter is also compatible with other fast phone charging standards such as Apple iPhone, iPad, Samsung, Huawei, Honor, Xiaomi. The advanced protection system at the charging adapter output protects the device being charged from damage. The charger function also detects the device being charged and selects the optimal charging speed and progress. The body of the power adapter has a pleasant shape and compact size. The combination of small dimensions and a wide range of input voltages, makes the charger an ideal travel helper. Input: input voltage AC 100V-240V / 1A / 50-60 Hz (WIV function) supports multiple national power standards two-pin euro plug - integrated in the body of the charger Output: USB-C port PD (tablets, phones) max. 20W: 5V/3A, 9V/2.22A, 12V/1.67A, PPS: 3-5V/3A, 3-11V/1A Charging technology: PD 3.0, PD 2.0, PPS, QC4+, QC 3.0, QC 2.0, AFC, FCP, SMART, Apple PD, Apple 2.4A Maximum power: maximum power 20W maximum current 3A  Supported charging technologies: Standard charging of all devices that support 5V and Apple iPhone 5, 6, SE, 7 charging.  SMART - charging max. 5V/3A, Quick Charge 1.0, USB Battery Charging 1.2 (DCP 1.5A) a Apple 2.4A (iPad). FCP - quick charging using Huawei Fast Charge Protocol. AFC - quick charging using Samsung Adaptive Fast Charging protocol. QC - quick charging using Qualcomm Quick Charge 2.0, Quick Charge 3.0 and Quick Charge 4+ protocol. PPS - quick charging using the Programmable Power Supply protocol (part of USB PD 3.0 and QC4+). PD - quick charging using USB Power Delivery 2.0 and Power Delivery 3.0 protocol. Examples of supported phones and tablets: PD - quick charging of Apple iPhone 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max phone. PD - quick charging (up to 20W) Apple iPhone 12, 12 Mini, 12 Pro, 12 Pro Max, 12, 12 Mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 13 Pro, 13 Pro Max, 14, 14 Plus, 14 Pro, 14 Pro Max, 15, 15 Plus, 15 Pro, 15 Pro Max phones. PD - quick charging (up to 20W) iPad mini, iPad Air, iPad Pro and other tablets. The charger supports WIV, AIC and CC functions: Wide Input Voltage - function of a wide range of input voltage; it protects the adapter against undervoltage and overvoltage at the input and allows the use of more national power standards. Automatic Intelligent Communication - function of automatic recognition of the connected device to select optimal charging parameters. Constant Output Current - the current hold function prevents the output power fluctuations; this function ensures steady course of charging. Complex output protection: OCP, OVP, OTP, OSP:  Over Current Protection. Protection of output against current overload. Over Voltage Protection. Protection against overvoltage at the output. Over Temperature Protection. Protection against overheating of the adapter. Output Short Circuit protection. Short circuit protection at the output. Other features: dimensions of the charger body 84 x 36 x 32 mm including a plug, weight: 52 g, material: non-flammable plastic. Package contains: white wall charger, multilingual guide CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA, packed in a cardboard box with a hanging hole.

Premium interconnect USB-C USB-C Data and Charging AXAGON BUCM3-CM30AB SPEED USB 3.2 Gen 1 cable with USB-C male connectors at both ends. The cable is designed for fast data transfers and notebook, phone, tablet and other mobile device charging. It supports up to 5 Gb/s data transfer and charging with current up to 3A. The cable is compatible with charging technologies technologiemi Power Delivery 60W, Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Cable also supports notebook charging using Power Delivery 60W technology. Data wires 30AWG together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: 2x USB-C (M) male Other Features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB - USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0). Compatible with USB 3.2 Gen 2, backward compatible with USB 2.0. Supports 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed) transmission rates. Support for high-speed charging by current up to 3A. Supported charging technologies: Power Delivery 2.0/3.0 60W (20V/3A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Cable includes power wires 22AWG, data wires 30AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for notebooks, mobile phones and smartphones, tablets, powerbanks and other mobile devices with USB-C connector. Other data: cable length 3 m, 4.5 mm outer diameter. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.

Premium connection USB-C USB-C data and charging AXAGON BUCM32-CM05AB SPEED+ USB 20Gbps (3.2 Gen 2x2) cable with USB-C male connectors at both ends. The cable is designed for very fast data transfers, video transfer and charging laptops, phones, tablets and other mobile devices with up to 100W of power. It also allows you to connect monitors, docking stations and external SSDs. The cable is designed to transfer data at a maximum speed of up to 20 Gb/s and can easily handle 10 Gb/s (USB 3.2 Gen 2). It also supports up to 4K/60Hz Ultra HD video and audio transmission. This makes the cable an ideal accessory for the iPhone 15 Pro and Pro Max (or later), which allow data transfer speeds of up to 10 Gb/s. Its compatibility with MacBooks and other storage devices, such as NVMe M.2 external drives, ensures your data transfer will be 10x faster than with a standard cable or AirDrop wireless connection.  Thanks to the integrated E-Mark chip, the cable can charge connected devices with a current of 5A up to 100W. It is compatible with Power Delivery 3.0, Quick Charge 4+ or Quick Charge 3.0 charging technologies for very fast charging not only smartphones and tablets, but also laptops. Compatibility is also ensured with other fast phone charging standards such as Apple iPhone, iPad, Samsung. The main advantage of the power cable is the Power Delivery 3.0 standard for charging Apple MacBook, Lenovo, Asus, HP, Dell and other laptops. You can charge your laptop directly from a USB-C charger or with the increasingly popular docking stations and port replicators.  Cable conductors are made of Tin-plated oxygen free copper. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) and 32AWG data wires guarantee fast charging and reliable data transfer of connected devices. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. Triple shielding protects transmitted signals from adverse interference.  The cable is equipped with aluminum end caps, connectors with nickel-plated surface and gold-plated contacts. The final strength of the cable is provided by the nylon braid. The braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The bonus is the included practical strip for easy packing of the cable. Connectors: 2x USB-C (M) male. Data transmission: USB 20Gbps (USB 3.2 Gen 2x2), also compatible with USB 10Gbps (USB 3.2 Gen 2). Support for second-generation data rates of 20.000 / 10.000 Mb/s. Backward compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0) / USB 2.0 (USB 480Mbps). Supported transmission rates 5.000 / 480 Mb/s. Video transmission: 4K resolution 4096 x 2160 at up to 60Hz, 2K/WQHD resolution 2560 x 1440 at up to 120Hz, FHD resolution 1920 x 1080 at up to 240Hz. HDR support (High dynamic range, 10-bit support) - realistic reproduction of light and dark details. Audio transmission support - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. Supported charging technologies (up to 100W): SMART / Apple 2.4A (iPad). AFC / SFC / SFC 2.0: Samsung Charging. QC 2.0 / QC 3.0 / QC4+: Qualcomm Quick Charge. PPS (part of USB PD 3.0 and QC4+). PD 2.0 / PD 3.0: USB Power Delivery - 100W (20V/5A). Support for fast charging with a current of up to 5A. Integrated E-MARK Chip. Other features:  Cable includes power wires 22AWG, data wires 32AWG.  Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding with plated foil and tinned copper braid minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection.  Cable length 0.5 m. outer diameter of the cable 5.0 mm. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and

Premium USB-C USB-C data and charging extension AXAGON BUCM32-CF05AB SPEED+ EXTENSIONS USB 3.2 Gen 2 cable with USB-C male and USB-C female connectors. The cable is designed for very fast data transfers and notebook, phone, tablet and other mobile device charging. Enables high-speed extensions for devices with short cables, such as multiport hubs and port replicators. You will not be limited by space and the location of ports on the laptop.  The cable supports up to 20 Gb/s data transfer and also allows image transfer up to 8K/60Hz Full Ultra HD resolution and audio. The cable is compatible with charging technologies Power Delivery up to 240W (depends on the extension cable), Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Connected devices can be charged with up to 5A current. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The nylon braid gives the cable ultimate strength. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 32AWG together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers.  Connectors: USB-C (M) male  USB-C (F) female  Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB 10 Gbps - USB 3.2 Gen 2, compatible also with SuperSpeed USB 20 Gbps - USB 3.2 Gen 2x2. Backward compatible with USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports 20 / 10 Gb/s (SuperSpeed+) second generation transmission rates. Supports 20.000 / 10.000 / 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ dual-lane / SuperSpeed+ / SuperSpeed / High / Full / Low speed) transmission rates. Video up to 8K@60Hz Full Ultra HD resolution and audio transfer support - USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or Thunderbolt 3/4 port is required. Supported charging technologies: Power Delivery 2.0 / 3.0 / 3.1 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Support for fast charging with a current of up to 5A. Cable includes power wires 22AWG, data wires 32AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and tinned copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable as a cable extension for laptops, tablets, mobile phones and other devices with USB-C connector especially for multiport hubs, port replicators and docking stations. The maximum extension length (cable + extension cable) is 2 m. Other data:  cable length 0.5 m,  outer diameter of the cable 5.0 mm. Package contains: USB-C M USB-C F black cable, packed in a printed and sealed foil package with hanging hole.

Premium USB-C USB-C data and charging extension AXAGON BUCM32-CF10AB SPEED+ EXTENSIONS USB 3.2 Gen 2 cable with USB-C male and USB-C female connectors. The cable is designed for very fast data transfers and notebook, phone, tablet and other mobile device charging. Enables high-speed extensions for devices with short cables, such as multiport hubs and port replicators. You will not be limited by space and the location of ports on the laptop.  The cable supports up to 20 Gb/s data transfer and also allows image transfer up to 8K/60Hz Full Ultra HD resolution and audio. The cable is compatible with charging technologies Power Delivery up to 240W (depends on the extension cable), Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Connected devices can be charged with up to 5A current. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The nylon braid gives the cable ultimate strength. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 32AWG together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers.  Connectors: USB-C (M) male  USB-C (F) female  Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB 10 Gbps - USB 3.2 Gen 2, compatible also with SuperSpeed USB 20 Gbps - USB 3.2 Gen 2x2. Backward compatible with USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports 20 / 10 Gb/s (SuperSpeed+) second generation transmission rates. Supports 20.000 / 10.000 / 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ dual-lane / SuperSpeed+ / SuperSpeed / High / Full / Low speed) transmission rates. Video up to 8K@60Hz Full Ultra HD resolution and audio transfer support - USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or Thunderbolt 3/4 port is required. Supported charging technologies: Power Delivery 2.0 / 3.0 / 3.1 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Support for fast charging with a current of up to 5A. Cable includes power wires 22AWG, data wires 32AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and tinned copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable as a cable extension for laptops, tablets, mobile phones and other devices with USB-C connector especially for multiport hubs, port replicators and docking stations. The maximum extension length (cable + extension cable) is 2 m. Other data:  cable length 1 m,  outer diameter of the cable 5.0 mm. Package contains: USB-C M USB-C F black cable, packed in a printed and sealed foil package with hanging hole.

Premium connection USB-C USB-C Data and Charging AXAGON BUCM32-CM10AB SPEED+ USB 3.2 Gen 2 cable with USB-C male connectors at both ends. The cable is designed for very fast data transfers and notebook, phone, tablet and other mobile device charging. It supports up to 20 Gb/s data transfer and charging with current up to 5A. Cable also allows image transfer up to 4K@60Hz Ultra HD resolution and audio transfer. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Thanks to the integrated E-Mark chip cable supports notebook charging using Power Delivery 100W technology. Data wires 32AWG together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: 2x USB-C (M) male. Other Features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB 10 Gbps - USB 3.2 Gen 2, compatible with SuperSpeed USB 20 Gbps - USB 3.2 Gen 2x2. Backward compatible with USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports 20 / 10 Gb/s (SuperSpeed+) second generation transmission rates. Supports 20.000 / 10.000 / 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ dual-lane / SuperSpeed+ / SuperSpeed / High / Full / Low speed) transmission rates. Video up to 4K@60Hz Ultra HD resolution and audio transfer support - USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or Thunderbolt 3 port is required. Support for high-speed charging by current up to 5A. Integrated E-Mark chip. Supported charging technologies: Power Delivery 100W (20V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Cable includes power wires 22AWG, data wires 32AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for notebooks, mobile phones and smartphones, tablets, powerbanks and other mobile devices with USB-C connector. Other data: cable length 1 m, 5 mm outer diameter. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.

Premium connection USB-C USB-C Data and Charging AXAGON BUCM4X-CM05AB NewGen+ cable with USB-C male connectors at both ends. The cable has a full-featured USB 40 Gbps specification (USB4 Gen 3x2) connection and is fully compatible with Thunderbolt 3 and Thunderbolt 4 specifications. It is designed for the fastest data transfer, video transfer and charging of laptops, phones, tablets. Allows connection of monitors, docking stations and external SSDs.The cable supports up to 40 Gb/s data transfer and also allows image transfer up to 8K/60Hz Full Ultra HD resolution and audio. The cable has implemented the latest specification of Power Delivery 3.1 charging technology. This technology delivers, among other things, a power output of 240 W which is more than double that of Power Delivery 3.0, which delivers 100 W. You can use not only the Standard Power Range (SPR) for voltages of 5, 9, 15 and 20 V with a current of 5 A, but also sufficient power in fixed voltages of 28, 36 and 48 V with a maximum current of 5 A (Extended Power Range  EPR). Thanks to the new PD 3.1 technology, you can also use the cable to power devices with much more power, such as gaming laptops, 8K monitors, docking stations. To identify the cable and its current capabilities, the cable has an integrated E-Mark chip. The cable is also compatible with Quick Charge, PPS, Samsung AFC and SFC, Apple, SMART and other charging technologies.Cable conductors are made of Tin-plated oxygen free copper. Power cables 22 AWG (lower number = larger cross-section and lower wire resistance) and 32 AWG data wires guarantee fast charging and reliable data transfer of connected devices. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. Triple shielding protects transmitted signals from adverse interference.  The cable is equipped with aluminum end caps, connectors with nickel-plated surface and gold-plated contacts. The final strength of the cable is provided by the nylon braid. The braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8 000 standard bends.The bonus is the included practical strip for easy packing of the cable. Connectors: 2× USB-C (M) male.  Data and video transfer, charging: 40 Gb/s, 8K/60Hz HDR10 Power Delivery 3.1 240 W (48 V / 5 A) Other features: DATA SYNC & FAST CHARGING  simultaneous data and video transfer and mobile device charging. Support for third generation transfer rates of 40 Gb/s. USB4 Gen 3×2 Full-featured.  Compatible with Thunderbolt 4, Thunderbolt 3 (including Apple support).  Support for second generation transmission rates 20/10 Gb/s. Compatible with USB4 Gen 2×2, USB 3.2 Gen 2×2 / USB 3.2 Gen 2.  Supports transfer rates of 5,000 / 480 Mb/s. Compatible with USB 3.2 Gen 1 (before USB 3.1 Gen 1 / USB 3.0) / USB 2.0. DisplayPort 1.4a, 2.0 protocol support for audio and video transmission up to Full Ultra HD 8K@60Hz, HDR10 resolution  a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3/4 port is required. Supported charging technologies: Power Delivery 2.0 / 3.0 / 3.1 240 W (48 V / 5 A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Support for fast charging with a current of up to 5 A. Integrated E-Mark chip. Cable includes power wires 22 AWG, data wires 32 AWG.  Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and tinned copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for MacBooks, iPhone 17 Pro / Pro Max, laptops, mobile phones and smartphones, tablets, power banks, chargers, monitors, docking stations, external SSD drives and other mobile devices wi

Premium connection USB-C USB-C data and charging AXAGON BUCM32-CM15AB SPEED+ USB 20Gbps (3.2 Gen 2x2) cable with USB-C male connectors at both ends. The cable is designed for very fast data transfers, video transfer and charging laptops, phones, tablets and other mobile devices with up to 100W of power. It also allows you to connect monitors, docking stations and external SSDs. The cable is designed to transfer data at a maximum speed of up to 20 Gb/s and can easily handle 10 Gb/s (USB 3.2 Gen 2). It also supports up to 4K/60Hz Ultra HD video and audio transmission. This makes the cable an ideal accessory for the iPhone 15 Pro and Pro Max (or later), which allow data transfer speeds of up to 10 Gb/s. Its compatibility with MacBooks and other storage devices, such as NVMe M.2 external drives, ensures your data transfer will be 10x faster than with a standard cable or AirDrop wireless connection.  Thanks to the integrated E-Mark chip, the cable can charge connected devices with a current of 5A up to 100W. It is compatible with Power Delivery 3.0, Quick Charge 4+ or Quick Charge 3.0 charging technologies for very fast charging not only smartphones and tablets, but also laptops. Compatibility is also ensured with other fast phone charging standards such as Apple iPhone, iPad, Samsung. The main advantage of the power cable is the Power Delivery 3.0 standard for charging Apple MacBook, Lenovo, Asus, HP, Dell and other laptops. You can charge your laptop directly from a USB-C charger or with the increasingly popular docking stations and port replicators.  Cable conductors are made of Tin-plated oxygen free copper. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) and 32AWG data wires guarantee fast charging and reliable data transfer of connected devices. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. Triple shielding protects transmitted signals from adverse interference.  The cable is equipped with aluminum end caps, connectors with nickel-plated surface and gold-plated contacts. The final strength of the cable is provided by the nylon braid. The braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The bonus is the included practical strip for easy packing of the cable. Connectors: 2x USB-C (M) male. Data transmission: USB 20Gbps (USB 3.2 Gen 2x2), also compatible with USB 10Gbps (USB 3.2 Gen 2). Support for second-generation data rates of 20.000 / 10.000 Mb/s. Backward compatible with USB 5Gbps (USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0) / USB 2.0 (USB 480Mbps). Supported transmission rates 5.000 / 480 Mb/s. Video transmission: 4K resolution 4096 x 2160 at up to 60Hz, 2K/WQHD resolution 2560 x 1440 at up to 120Hz, FHD resolution 1920 x 1080 at up to 240Hz. HDR support (High dynamic range, 10-bit support) - realistic reproduction of light and dark details. Audio transmission support - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. Supported charging technologies (up to 100W): SMART / Apple 2.4A (iPad). AFC / SFC / SFC 2.0: Samsung Charging. QC 2.0 / QC 3.0 / QC4+: Qualcomm Quick Charge. PPS (part of USB PD 3.0 and QC4+). PD 2.0 / PD 3.0: USB Power Delivery - 100W (20V/5A). Support for fast charging with a current of up to 5A. Integrated E-MARK Chip. Other features:  Cable includes power wires 22AWG, data wires 32AWG.  Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding with plated foil and tinned copper braid minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection.  Cable length 1.5 m. outer diameter of the cable 5.0 mm. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and

Premium USB-C USB-C data and charging extension AXAGON BUCM32-CF15AB SPEED+ EXTENSIONS USB 3.2 Gen 2 cable with USB-C male and USB-C female connectors. The cable is designed for very fast data transfers and notebook, phone, tablet and other mobile device charging. Enables high-speed extensions for devices with short cables, such as multiport hubs and port replicators. You will not be limited by space and the location of ports on the laptop.  The cable supports up to 20 Gb/s data transfer and also allows image transfer up to 8K/60Hz Full Ultra HD resolution and audio. The cable is compatible with charging technologies Power Delivery up to 240W (depends on the extension cable), Quick Charge, Samsung AFC, Huawei FCP, SMART and others. Connected devices can be charged with up to 5A current. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The nylon braid gives the cable ultimate strength. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Data wires 32AWG together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers.  Connectors: USB-C (M) male  USB-C (F) female  Other features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB 10 Gbps - USB 3.2 Gen 2, compatible also with SuperSpeed USB 20 Gbps - USB 3.2 Gen 2x2. Backward compatible with USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports 20 / 10 Gb/s (SuperSpeed+) second generation transmission rates. Supports 20.000 / 10.000 / 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ dual-lane / SuperSpeed+ / SuperSpeed / High / Full / Low speed) transmission rates. Video up to 8K@60Hz Full Ultra HD resolution and audio transfer support - USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or Thunderbolt 3/4 port is required. Supported charging technologies: Power Delivery 2.0 / 3.0 / 3.1 240W (48V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Support for fast charging with a current of up to 5A. Cable includes power wires 22AWG, data wires 32AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and tinned copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable as a cable extension for laptops, tablets, mobile phones and other devices with USB-C connector especially for multiport hubs, port replicators and docking stations. The maximum extension length (cable + extension cable) is 2 m. Other data:  cable length 1.5 m,  outer diameter of the cable 5.0 mm. Package contains: USB-C M USB-C F black cable, packed in a printed and sealed foil package with hanging hole.

Premium connection USB-C USB-C Data and Charging AXAGON BUCM32-CM20AB SPEED+ USB 3.2 Gen 2 cable with USB-C male connectors at both ends. The cable is designed for very fast data transfers and notebook, phone, tablet and other mobile device charging. It supports up to 20 Gb/s data transfer and charging with current up to 5A. Cable also allows image transfer up to 4K@60Hz Ultra HD resolution and audio transfer. Durable data and power cable with extended service life is equipped with metal terminals, connectors with a nickel-plated surface and gold-plated contacts. Cable conductors are made of Tin-plated oxygen free copper. High-quality cable insulation, made of flexible TPE, guarantees maximum durability and also maintains sufficient flexibility. The final strength of the cable is provided by the nylon braid. The bonus is a practical strip for easy packing of the cable. Power cables 22AWG (lower number = larger cross-section and lower wire resistance) guarantee fast charging of phones and other mobile devices. Thanks to the integrated E-Mark chip cable supports notebook charging using Power Delivery 100W technology. Data wires 32AWG together with high-quality shielding, ensure reliable data transmission. Triple shielding protects transmitted signals from adverse interference. Nylon braid in combination with a cable gland significantly reduces dangerous cable bending. The cable life is extended to more than 8000 standard bends. The mechanical resistance of the cable is also increased by the aluminum terminal covers. Connectors: 2x USB-C (M) male. Other Features: DATA SYNC & FAST CHARGING - simultaneous data transfer and mobile device battery charging. SuperSpeed USB 10 Gbps - USB 3.2 Gen 2, compatible with SuperSpeed USB 20 Gbps - USB 3.2 Gen 2x2. Backward compatible with USB 3.2 Gen 1 (formerly USB 3.1 Gen 1 / USB 3.0), USB 2.0. Supports 20 / 10 Gb/s (SuperSpeed+) second generation transmission rates. Supports 20.000 / 10.000 / 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ dual-lane / SuperSpeed+ / SuperSpeed / High / Full / Low speed) transmission rates. Video up to 4K@60Hz Ultra HD resolution and audio transfer support - USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or Thunderbolt 3 port is required. Support for high-speed charging by current up to 5A. Integrated E-Mark chip. Supported charging technologies: Power Delivery 100W (20V/5A), Qualcomm Quick Charge 2.0 / 3.0 / 4+, Samsung Adaptive Fast Charging, Huawei Fast Charge Protocol, SMART Charging and others. Cable includes power wires 22AWG, data wires 32AWG. Tin-plated oxygen free copper conductors to reduce oxidation, increase conductivity, and clear signal without distortion. Double shielding via galvanized foil and oxygen free copper braiding minimizes interference and prevents signal loss. Nickel-plated connectors and gold-plated contacts prevent oxidation and provide a reliable connection. Suitable for notebooks, mobile phones and smartphones, tablets, powerbanks and other mobile devices with USB-C connector. Other data: cable length 2 m, 5.0 mm outer diameter. Package contains: USB-C M USB-C M black cable, tightening strip, packed in a printed and sealed foil package with hanging hole.