Smooth Q

Graphic Tablet Huion Q620MThe Huion Q620M is a graphics tablet that offers both wired and 2.4G wireless connectivity. With a large working area (266.7 x 166.7 mm) and a thin 8-millimeter chassis, the device combines work comfort with mobility. Windows, macOS and Android compatibility allows you to use it on a wide range of hardware - both for office work and on the go. A PW500 stylus with EMR technology is included.Precise motion mappingThe PW500 stylus works with electromagnetic resonance technology and does not require charging. Responding to 8192 levels of pressure, it allows you to precisely control the force of application and get the right thickness and intensity of lines. The recorded motion is smooth and instantaneous - with a reading rate of more than 233 points per second and a resolution of 5080 LPI, every gesture is accurately reproduced. The device also supports tilt up to ±60°, so that - if the application supports it - it is possible to achieve a natural tool guiding effect, for example, when shading.Ergonomics and personalization of workThe Huion Q620M is equipped with 8 programmable buttons and a functional dial that allows quick access to the most frequently used functions - such as zooming, rotating the canvas or changing the brush size. This configuration makes it easy to tailor the tablet to your own working style and increase efficiency.Wireless connectivity and long working timeWith the included receiver, the tablet supports wireless connection via USB 2.4G. The built-in 1,100 mAh battery provides up to 20 hours of use on a single charge, allowing you to use the device all day without having to plug in a cable. Power renewal is done via the USB-C port.Included: Graphics tablet Stylus Stylus holder Spare tip x8 USB-C cable Wireless USB receiver User manual Manufacturer Huion Model Q620M Dimensions 375.5 x 220.4 x 8 mm Working surface 266.7 x 166.7 mm Weight 666 g Interface USB-C Stylus model PW500 Technology batteryless, EMR Resolution 5080 LPI Pressure sensitivity 8192 levels Maximum tilt ±60° Detection height >10 mm Reading speed >233PPS Accuracy +0.3 mm Buttons 8 programmable buttons + dial Compatibility Windows 7 or later, macOS 10.12 or later, Android 6.0 or later, Linux

Kompakts salokāms 3 asu stabilizators Iebūvēts pagarināšanas stienis līdz 8,5" Ainavas un portreta režīmi Tiešraide tiešraidē, izmantojot saistīto mobilo lietotni Atbalsta viedtālruņus ar svaru līdz 9,9 oz Dažādi veidņu & Gimbal režīmi Iebūvētas pogas 15 stundu darbības laiks Statīva piederums C tipa USB pieslēgvieta uzlādei & programmaparatūra

ZHIYUN Smooth Q5 Ultra nodrošina gludu video uzņemšanu ar AI izsekošanu un iebūvētu LED gaismu, ideāli piemērots mobilajai filmēšanai.

Stabilizators viedtālrunim Kompakts dizains Integrēta LED video gaisma Akumulators darbojas līdz 15 stundām Funkcionāli foto un video režīmi Combo ietver rokas siksniņu un aizsargsomu

NEEWER SF120Q 120 cm parabolic softboxWith its large, 120 cm diameter hexadecagon design, the NEEWER SF120Q is ideal for professional photography and video production, where soft, evenly diffused light is essential. The deep interior with a smooth silver coating effectively reflects light, helping to maintain natural color reproduction and the appropriate color temperature. Thanks to the parabolic design, the light spreads wider and more evenly, making it easier to achieve aesthetic results in portrait, beauty, product, and fashion photography, as well as in film productions.Soft light and greater control over lightingThe softbox is equipped with two Velcro-mounted diffusers that help soften harsh light and reduce unwanted shadows. The included honeycomb grid narrows the light beam to a 45° angle, allowing for more precise lighting direction and highlighting the contours of the face or subject. The ability to freely combine diffusers makes it easy to adapt the light’s character to a specific scene and shooting style.Quick setup and durable constructionThe design, based on 16 sturdy ribs, maintains its ideal shape even after repeated folding and unfolding, ensuring high durability during intensive studio work. The quick-setup mechanism allows you to prepare the softbox for use in less than 15 seconds without additional tools, significantly streamlining workflow on set. Despite its large size, the model remains relatively lightweight, and the included carrying bag facilitates storage and transport of the equipment.Universal Bowens mountThe SF120Q model uses the popular Bowens mount, making it compatible with a wide range of studio lights and LED lights for photography and video. The softbox is compatible with, among others, select models from NEEWER, Godox, Aputure, Amaran, and SmallRig equipped with a Bowens mount. The large diffusion surface works best in spacious photo studios and on larger sets.Designed for professional photo shootsThe parabolic design and large diameter make the softbox ideal for portrait photography, beauty shoots, product photography, commercial shoots, wedding photography, and video production. The foldable design facilitates transport between photo shoots, and the internal pocket in the bag allows for convenient storage of the honeycomb grid and additional accessories.Included Parabolic softbox Honeycomb grid White diffuser x2 Carry bag User manual Specifications Manufacturer NEEWER Model SF120Q Product type Parabolic hexadecagon softbox Diameter 120 cm Shape Hexadecagon Mount Bowens mount Material Oxford fabric, aluminum alloy Dimensions when unfolded 120 × 120 × 75 cm Dimensions when folded 20 × 20 × 96 cm Outer diffuser diameter 115 cm Inner diffuser diameter 82 cm Grid diameter 118 cm Softbox weight 2.58 kg Kit weight 3.04 kg Compatibility Aputure 600d, Amaran 300C, Godox Vision 4, SmallRig RC 120D, SmallRig RC 220D, NEEWER Q6, NEEWER Q4, NEEWER AS600B, NEEWER FS600C, NEEWER FS300B/C, NEEWER FS230B/C, NEEWER CB300B, NEEWER CB300C, NEEWER CB200, NEEWER CB200B, NEEWER S101-300W PRO, NEEWER S101-400W PRO, NEEWER S102-400W PRO, NEEWER Q300

Neewer Q4 Flash with BatteryThe NEEWER Q4 400Ws is a portable flash designed for both studio and outdoor photography. It offers 400Ws of power and a high guide number of GN72, making it well-suited for everything from portraits to more demanding product and fashion shoots. The compact housing, weighing approximately 2.24 kg, makes it easy to transport, and the convenient handle allows for comfortable work outside the studio. HSS synchronization up to 1/8000s and a very short flash duration of up to 1/10989s help freeze motion and capture images even in intense daylight.High-capacity battery and fast continuous shootingThe flash is equipped with a 21.6V lithium battery with a capacity of 2800mAh, which provides approximately 400 full-power flashes. A short recycling time of 0.01 to 1.2 seconds allows for smooth operation during dynamic photo shoots. The ability to shoot in burst mode at up to 20 frames per second makes this model well-suited for sports, event, and reportage photography. An additional advantage is the option to power the flash from the mains using the included adapter.Precise light control and advanced flash modesThe NEEWER Q4 supports TTL, Manual, and Multi modes, allowing you to easily adapt your workflow to the type of photography. Power adjustment from 1/1 to 1/256 in 0.1-stop increments enables precise flash intensity control. Stroboscopic mode allows for up to 100 flashes at a frequency of up to 199Hz, offering greater possibilities for creative motion shots. The flash also supports first- and second-curtain sync as well as S1 and S2 modes, which facilitate coordination with other light sources.LED modeling light with natural color renderingThe built-in 30W LED modeling light with a color temperature of 5600K helps you assess the lighting setup before taking the photo. The high CRI of 95+ translates to more natural color rendering, which is important for product and portrait photography. Thanks to the preview of shadows and light direction, it’s easier to set up the scene and reduce the number of test flashes.Wireless Communication and Wide CompatibilityThe model uses the NEEWER 2.4G Q wireless system with a range of up to 100 meters. Support for 32 channels and 5 groups allows for convenient control of a larger lighting setup. The flash can also work with the Godox 2.4G X system in RX COMPAT mode and is compatible with the Sekonic L-858D light meter with the RT-GX module. Compatibility with Canon, Nikon, and Sony cameras facilitates integration with popular photography systems.Bowens mount and convenient operationThe use of a standard Bowens mount allows you to use popular light modifiers, such as softboxes, reflectors, or beauty dishes, without additional adapters. A built-in fan aids cooling during intensive use, and a dot-matrix display improves the ease of adjusting settings. The manufacturer has also equipped the flash with a USB-C port for software updates, an automatic power-saving feature, and an audible signal indicating readiness for the next flash.Included 1 x Q4 Flash 1 x Standard Reflector 1 x Lithium Battery 1 x Handle 1 x AC Adapter 1 x Power Cord 1 x Carrying Case Manufacturer NEEWER Model Q4 Power 400Ws Flash duration 1/209s to 1/10989s Recycle time approx. 0.01–1.2s Power adjustment 9 levels (1/256–1/1) Flash modes M/Multi (radio off), TTL/M/Multi (radio receiver mode) Photocell S1/S2 Flash delay 0.01–30s Stroboscopic flash Yes (up to 100 times, 199Hz) Synchronization HSS (up to 1/8000 s), first or second curtain Capacity 400 full-power flashes Modeling light (LED) 30 W / 5600 K / CRI 95+ Color temperature 5600 ± 200 K Flash Exposure Compensation (FEC) Manual; FEB: +/-3 stops in 1/3-stop increments 2.4G Q Radio System 32 channels, 5 groups Transmission range 100m Power supply Lithium battery / DC power adapter (included) Power Saving Auto-off after 30–120 min of inactivity Triggering Methods 2.4G Radio, S1/S2, 3.5mm sync cable, Test button Battery Specifications 21.6V / 56Wh / 2800mAh Ad

QIDI Q2C 3D PrinterThe QIDI Q2C is a 3D printer designed as a fast and precise tool for working with a wide range of engineering materials, offering a large build volume of 270 × 270 × 256 mm and a high print speed of up to 600 mm/s with acceleration of up to 20,000 mm/s². The design, based on a rigid, all-metal CoreXY frame, ensures operational stability even during intense head movement, while the High Hardness Linear Guide Rail system on the X-axis maintains smooth and accurate movement over the long term. The system is complemented by a new 1.5GT belt with increased tooth density, which reduces vibration and improves the surface quality of prints. Combined with a hotend capable of reaching temperatures up to 370°C, the printer is ready to handle demanding filaments, including carbon and glass fiber composites and high-temperature materials such as PPS-CF.Stable CoreXY design and precise movementThe use of a full metal frame in the CoreXY layout helps reduce vibrations and maintain high structural rigidity even at high operating speeds. Combined with high-hardness linear guides, X-axis movement remains smooth and repeatable, which directly impacts the dimensional accuracy of models. The drive system has been optimized to reduce vibration artifacts, resulting in smoother and more consistent print surfaces.Extruder and handling of demanding materialsThe dual filament drive system, combined with hardened steel extruder components, ensures stable and reliable material feeding. The design is optimized for use with engineering and abrasive filaments, allowing for the printing of materials such as carbon fiber or glass fiber composites without excessive wear on the mechanism. As a result, the device maintains repeatability even during long and demanding projects.Process Automation and Ecosystem SupportThe printer utilizes a new-generation leveling system in which the nozzle acts as a sensor. This allows for accurate measurement of the build plate surface without offsets or additional probes, which increases the precision of the first layer and reduces the risk of errors. Within the QIDI ecosystem, in conjunction with the QIDI Box (not included), features are also available to automate filament handling, including intelligent detection of certain system operating conditions, such as material feeding issues or filament tangles, which helps reduce the risk of failed prints.Speed, display, and connectivityThe QIDI Q2C is designed as a high-speed production printer, offering print speeds of up to 600 mm/s and high accelerations of up to 20,000 mm/s², which significantly reduces project turnaround times. The device is equipped with a 4.3-inch touchscreen that facilitates operation and control of operating parameters. Various connectivity options are also available, including Wi-Fi and Ethernet, allowing for integration into networked environments in workshops and production facilities.Safety and Operation ControlThe safety system relies on continuous temperature monitoring and the use of electronic safeguards that respond when abnormalities are detected. As a result, the printer can automatically cut off power in emergency situations, which enhances safety during long and demanding prints. Manufacturer QIDI Model Q2C Technology FDM Build volume 270 × 270 × 256 mm Maximum hotend temperature ≤ 370°C Maximum bed temperature ≤ 120°C Maximum print speed up to 600 mm/s Acceleration ≤ 20,000 mm/s² Nozzle diameter 0.4 mm (optional 0.2 / 0.6 / 0.8 mm) Supported filament 1.75 mm Supported materials PLA, ABS, ASA, PETG, TPU, PA, PC, composites: Carbon Fiber / Glass Fiber Reinforced, high-temperature materials (e.g., PPS-CF) Wi-Fi 2.4 GHz Ethernet Yes USB Yes Printer dimensions 402 × 438 × 494 mm