Solar Power Bank

Self-sufficient travel with the BRESSER solar charger Whether camping, sailing, trekking or swimming at the nearest lake – anyone who enjoys being outdoors for long periods of time does not want to do without their smartphone, tablet, powerbank, etc. But one question quickly arises: where can I find the nearest power socket? After all, every battery runs out and our practical everyday helpers can't manage without electricity. With the ultra-compact BRESSER solar charger, you simply use the power of the sun to charge your devices. The environmentally friendly solar energy is free of charge – and you remain independent of the power grid! Simply open it up, put it down and immediately produce green solar power The handling is very simple: unfold the solar panel and align it as perpendicularly as possible to the sun. Then connect the device to be charged to the solar charger, either with a suitable USB cable (not included) or with the included DC connection cable. The charging process begins immediately. Which devices can the solar panel charge? The solar charger gets all devices with a USB power supply connection or the above-mentioned DC power plug connection up and running again in no time – e.g. smartphones, tablets, power banks, portable playstations, MP4 players, GPS devices and Bluetooth headphones. For charging large power stations, we recommend the more powerful BRESSER solar panels with at least 60 watts output power – see art. no. 3810050, 3810060, 3810070. Universal charger with flexible connection options Two black USB A sockets for normal charging and another orange USB A socket with QC3.0 standard for fast charging of newer generations of devices are available for powering your devices. An additional universal connection cable with a hollow DC plug 5.5/2.1 mm in diameter and 2.5 metres long, as well as 3 plug adapters (3.5/1.35 mm, 5.5/2.5 mm, 8.0/5.5/0.8 mm) are included in the scope of delivery. The polarity of the connectors is as follows: Inner contact = positive (+), outer contact = negative (-). How long does it take to charge a battery? Most modern devices with built-in batteries indicate the current charging status of the battery on a display or status LEDs. The charging process is also automatically terminated by the internal charger of the smartphone or tablet, etc., as soon as the battery is full. Nevertheless, it is helpful to know how long a full charge theoretically takes with an empty battery. This is the only way to choose the right solar panel model for the requirements of the devices you want to charge. Here is a short calculation: Divide the capacity of the battery (mAh) by the charging current of the charger (mA) and multiply this by a factor of 75. This then gives you the approximate charging time in minutes that is required to fully charge the battery at 100% sunshine duration. Example: A battery with a capacity of 3000mAh (3.0 Ah) and a charging current via 5 volt USB connection of 3100mA (3.1 amps). So 3000 : 3100 x 75 = 73 minutes. Dividing the result by 60 gives the charging time in hours: 1.2 hours. This means that an average smartphone can be fully charged in just about 1.2 hours with a 40-watt solar panel. Carabiner hooks for attachment included In order to attach the solar panel securely to an object and align it perfectly with the sun, 4 sturdy snap hooks are included in the scope of delivery. Simply connect them to the riveted ring eyelets of the solar panel and use them to hang the solar charger stably, e.g. on a tent loop, a fence or other suitable holding points. Innovative solar cell technology with high efficiency Monocrystalline silicium cells ensure high efficiency and the fastest possible charging of the device batteries. This means maximum electricity yield per solar surface. As a result, you benefit from relatively high charging currents and short charging times with a compact design. Easy transport Thanks to the modern and flat design, you can easily fold the individual se

SwitchBot Keypad Vision ProThe SwitchBot Keypad Vision Pro is an advanced keypad for SwitchBot smart locks that combines multiple unlocking methods with a high level of security. The device allows you to open the door instantly—in just 0.3 seconds—using 3D facial recognition, palm vein scanning, a passcode, an NFC card, a mobile app, or—when paired with a compatible lock —a fingerprint. All biometric data is stored locally on the device, and advanced Smart Anti-Spoofing algorithms effectively protect against spoofing attempts using photos, videos, and 2D images. With an IP65 rating, operation in temperatures ranging from -20°C to 45°C, and a battery that lasts up to 12 months, the device is suitable for use both indoors and outdoors.Next-Generation Biometric AuthenticationThe keypad utilizes 3D facial recognition and palm vein scanning technology, offering an exceptionally high level of accuracy. In both cases, the false acceptance rate is less than 0.0001%, ensuring reliable user identification. Facial recognition uses 940 nm infrared light, allowing it to work even in complete darkness. This is a convenient solution when your hands are full, you’re wearing a mask, your fingers are wet, or your fingerprints are difficult to read.Multiple Access Methods for Household Members and GuestsThe SwitchBot Keypad Vision Pro allows you to flexibly manage access to your home. The system supports up to 100 users using facial recognition and up to 100 users using palm vein scanning. You can also save up to 100 NFC cards, create access codes ranging from 6 to 12 digits, and grant access via the SwitchBot app. Various types of codes are available, including permanent, temporary, one-time, and emergency codes, making it easy to grant access to family members, guests, or employees.Integration with the SwitchBot EcosystemThe device works with the entire SwitchBot Lock series, including the Lock Pro and Lock Ultra models. Once paired with a compatible lock, you can also use fingerprint unlocking for up to 90 users. The keypad also functions as a doorbell—pressing a button activates an audible signal on the Lock Ultra, and when connected to the Hub 3, the user receives immediate notifications about people at the entrance. The Hub 3 also provides remote control, integration with Alexa, Google Home, and Siri, and support for the Matter standard.Long Battery Life and Convenient ChargingThe built-in lithium battery provides up to one year of operation on a single charge, assuming 10 unlocking operations per day. The keypad can be charged using a USB-C cable or a power bank, which enhances user convenience. For those seeking maximum independence, there’s also the option to power the device using a compatible solar panel, which, under the right lighting conditions, can provide the energy needed for the device’s daily operation.Durable Design for Everyday UseThe housing, made of PC materials and featuring an anti-UV coating and a durable PVC film, is designed to withstand demanding conditions. The IP65 rating protects the device from dust and water, and installation can be done using 3M tape or screws. Bluetooth Low Energy connectivity ensures a stable connection within a range of up to 5 meters, and the compact dimensions of 131 × 65 × 30 mm and a weight of 205 g allow for an aesthetically pleasing installation near the front door.Included in the set Pro Keyboard with Camera Mounting Kit (A) Corner Mounting Kit (B) Mounting Tape A Mounting Tape B Hole Marking Sticker Type-C Charging Cable Black screw × 2 Button sticker Retractable pin (reset/unlock needle) Screw set (includes wall plugs) Wet wipe NFC card Manufacturer SwitchBot Model Keypad Vision Pro Unlock Methods 3D facial recognition, palm vein scanning, fingerprint, NFC card, access code, SwitchBot app Unlock Time 0.3 s Facial Recognition Up to 100 users Palm vein scanning Up to 100 users Fingerprints Up to 90 users NFC cards Up to 100 cards Access codes 6–12 digits Code types Permanent, temporar

Self-sufficient travel with the BRESSER solar charger Whether camping, sailing, trekking or swimming at the nearest lake – anyone who enjoys being outdoors for long periods of time does not want to do without their smartphone, tablet, powerbank, etc. But one question quickly arises: where can I find the nearest power socket? After all, every battery runs out and our practical everyday helpers can't manage without electricity. With the ultra-compact BRESSER solar charger, you simply use the power of the sun to charge your devices. The environmentally friendly solar energy is free of charge – and you remain independent of the power grid! Simply open it up, put it down and immediately produce green solar power The handling is very simple: unfold the solar panel and align it as perpendicularly as possible to the sun. Then connect the device to be charged to the solar charger, either with a suitable USB cable (not included) or with the included DC connection cable. The charging process begins immediately. Which devices can the solar panel charge? The solar charger gets all devices with a USB power supply connection or the above-mentioned DC power plug connection up and running again in no time – e.g. smartphones, tablets, power banks, portable playstations, MP4 players, GPS devices and Bluetooth headphones. It is also suitable for charging large power stations such as the BRESSER Power Station 100 Watt (art. no.3810000) and the BRESSER Power Station 500 Watt (art. no. 3810020) as well as power stations from other manufacturers with suitable connection values. Universal charger with flexible connection options Two black USB A sockets for normal charging and another orange USB A socket with QC3.0 standard for fast charging of newer generations of devices are available for powering your devices. An additional universal connection cable with a hollow DC plug 5.5/2.1 mm in diameter and 2.5 metres long, as well as 3 plug adapters (3.5/1.35 mm, 5.5/2.5 mm, 8.0/5.5/0.8 mm) are included in the scope of delivery. The polarity of the connectors is as follows: Inner contact = positive (+), outer contact = negative (-). How long does it take to charge a battery? Most modern devices with built-in batteries indicate the current charging status of the battery on a display or status LEDs. The charging process is also automatically terminated by the internal charger of the smartphone or tablet, etc., as soon as the battery is full. Nevertheless, it is helpful to know how long a full charge theoretically takes with an empty battery. This is the only way to choose the right solar panel model for the requirements of the devices you want to charge. Here is a short calculation: Divide the capacity of the battery (mAh) by the charging current of the charger (mA) and multiply this by a factor of 75. This then gives you the approximate charging time in minutes that is required to fully charge the battery at 100% sunshine duration. Example 1: A battery with a capacity of 3000mAh (3.0 Ah) and a charging current via 5 volt USB connection of 3300mA (3.4 amps). So 3000 : 3400 x 75 = 66 minutes. Dividing the result by 60 gives the charging time in hours: 1.1 hours. This means that an average smartphone can be fully charged in just about 1.1 hours with a 90-watt solar panel. Example 2: A large power station battery with a capacity of 13000mAh (13.0 Ah) and a charging current via 18 volts DC plug connection of 5000mA (5.0 amps). So 13000 : 5000 x 75 = 195 minutes. Dividing the result by 60 gives the charging time in hours: 3.3 hours. This means that an average smartphone can be fully charged in just about 3.3 hours with a 90-watt solar panel. Carabiner hook for attachment included In order to attach the solar panel securely to an object and align it perfectly with the sun, 4 sturdy snap hooks are included in the scope of delivery. Simply connect them to the riveted ring eyelets of the solar panel and use them to hang the solar charger stably, e.g. on a tent loop,

Technical: 36 megapixels 0.3 seconds shutter speed 30m flash detection range Double battery life - thanks to double battery capacity Insert 8 or 16 AA batteries into the camera Always the best network anywhere in Europe Antenna and modem are perfectly harmonised and automatically select the strongest network. Photo and video transmission 15s real FULL HD 1080p video with sound Flexible shutter release Adapts the response speed of the camera to the environment Remote firmware updates Updates and time changes are carried out automatically without having to pick up the camera. Simplest camera set-up Setup has never been easier with the addition of buttons to format the microSD card and test camera positioning. Power: 8x AA batteries or 16x AA batteries (not included) LIT-22 rechargeable lithium battery or 2x LIT-22 rechargeable lithium batteries (optional) 8x AA batteries and 1x LIT-22 lithium rechargeable battery (optional) SPLB-22 solar power bank (optional) SPLB-10 solar power bank (optional) Memory: Up to 512GB Micro SDHC Delivery content: Camera Mounting strap SIM card (already inserted in the camera) Antenna 2x battery magazines

NAVITEL SP200 is 200W foldable solar panel for NAVITEL portable power stations NS series. Also, it is fit for the direct charging for mobile phones, power banks, tablets, laptops, GPS, digital cameras*, etc. Ideally suited for outdoor life and even unexpected power outages. (*Power station, phones, charging cables for phones and others devices are not included in the package and must be purchased separately.) It is monocrystalline solar panels with adjustable brackets, which can convert up to 22% of solar energy into free energy for power generation. It can also establish a solar generation system with NAVITEL NS300/NS500/NS1000 to store power for backup. The solar charger is made of wear-resistant Oxford cloth, is IP67 waterproof, and is suitable for many kinds of weather. It is very suitable for outdoor activities such as camping, climbing, picnics, etc. USB A output: 5V/3.4A, 9V/2.5A, 12V/2A 24W max. USB-C output: 5V/3A, 9V/3A, 12V/3A, 15V/3A 45W max. Anderson 30A output: yes Unfolded dimensions, mm: 2440x540x25 Folded dimensions, mm: 540x580x60 Weight: 6900 g