Sony Canon adapteris

The Falcon Eyes wireless trigger set RF-DD2.4 is an ideal and affordable way to have wireless control over your studio flash unit. You put the receiver in the synchronization input of the studio flash unit. Shove the transmitter on the SLR camera and the set is ready for use. Application RF-DD2.4 The wireless control goes through a 2.4GHz radio frequency between transmitter and receiver, so as a photographer you have 100% freedom of space(the signal goes 360 degrees). The set has 16 adjustable channels for the wireless signal. The maximum wireless range is 100 meters. By means of the 3.5 mm Jack plug adapter the receiver can also be connected to a flash with a 3.5 mm synchronization input. The receiver works on two AAA batteries (not included), these are easily replaced with the sliding cap on top of the receiver. The button cell battery in the transmitter is also easy to replace. On top of the transmitter is a hotshoe connection, on which various other accessories (eg an external flash) can be placed. This hotshoe connection on top of the transmitter does not transmit a TTL signal. In addition, the transmitter has a 2.5mm synchronization cable input, allowing the RF-DD2.4 to be connected to cameras without hotshoe but with an x-contact connection by means of a synchronization cable (see "Optional accessories"). Successor RF-DD4 The RF-DD2.4 is successor to the RF-DD4 and operates on a 2.4GHz frequency, instead of 433MHz. This is therefore not compatible with the old RF-DD4 version, this applies to both the transmitter and the receiver. Attention: The RF-DD2.4 works on all SLRs, however with Sony / Minolta cameras you need the HS-25Sa hotsoe adapter. You can use the Travor HC-511 adapter for the new Sony MI hot shoe. Both adapters can be found with the optional accessories. The RF-DD4 does not work in combination with the Canon EOS 80D. This triggerset is not compatible with: html, body { height: 100%; } img.middencontact { height: 20%; width: 20%; } Combination with a Sony camera If you have a Sony camera with a new Sony hotshoe connection, you can use the TF-334 from the optional accessories. If you have a Sony camera with an old connection, you can use the HS-25Sa.

Blogging smartphone video rig with LED light, tripod mount, phone holder and microphone.  Features:  A studio video rig with LED light, microphone, tripod mount and smartphone holder. Phone holder securely locks your smartphone in place and connects seamlessly to a tripod by connecting it to a flash and microphone. The holder is adjustable and is compatible with iPhone / Samsung / Huawei / OPPO / Vivo / Xiaomi most smartphones with and without case, from 1.7 to 4.3 inches wide. Both horizontal and vertical mounting of the phone is supported. It makes shooting videos much easier since you have a much better grip with two handles. It is a must have if you enjoy recording high quality videos. LED studio light with 104 LEDs for professional photo / video sessions using DSLR digital cameras or smartphones. Featuring a miniature design and extremely low power consumption, it is powered by four AA batteries (batteries not included, must be purchased separately), but also supports an external power input (via a USB-C type port), which is convenient for long-term use. Adjustable light intensity allows you to extract a variety of lighting atmospheres (including cold or warm lights) without the need for additional filters. It has a separate power switch that maintains the same set brightness when newly turned on. The 1/4-inch screw hole allows mounting on stands or other devices attached with a standard 1/4-inch screw (such as Canon, Nikon, Sony and other camcorders). Microphone connects directly to your smart device via the standard 3.5mm jack, providing clear sound for any application. Sensitivity -42dB. Tripod mount has a lightweight and portable design and weighs only 150 g. Made of thick and durable plastic, perfect for action or sports videos from a fixed angle or for shooting with a GoPro, DSLR camera or smartphone. The push-button mechanism allows you to set and lock the ball head in one quick, intuitive motion. Pressing the button releases the ball head so that it can move freely. When the button is released, the ball is locked automatically in the selected position. The solid construction ensures a secure base in any situation, and the rubber feet guarantee a stable and non-slip stand on any surface. With a standard 1/4-inch screw compatible with Canon / Nikon / Sony / Pentax compact cameras and other lightweight DSLR cameras; suitable for GoPro 5/4/3 + and iPhone, Galaxy, Huawei, Haweel and other smartphones. The whole blogger video rig is easy to set up and use, no extra tools required. You can move your photo / video studio anywhere!  Specifications:  Phone holder size: 25 x 13 x 4 cm. Phone sizes supported: 1.7-4.3 inches. LED beads: 104 pcs. LED power supply: USB-C / 4x AA batteries (batteries not included). Brightness: 1800 lm. White light temperature: 6400K. Warm white temperature: 3200K. Color rendering index: Ra>97. Voltage: 5 V. Microphone load impedance:

Commlite CoMix CM-EF-NEX adapters ļauj izmantot Canon EF/EF-S objektīvus uz Sony E-mount pilna kadra kamerām ar pilnu AF un apertūras kontroli.

Metabones Canon FD/FL uz Sony E-mount T adapteris ļauj izmantot klasiskos Canon FD un FL objektīvus ar Sony E-mount bezspoguļu kamerām.

Viltrox EF-NEX IV adapters ļauj uzstādīt Canon EF un EF-S objektīvus uz Sony E-mount kamerām ar uzticamu autofokusu un apertūras kontroli.

VariZoom VZC8EX kabelis ļauj Canon 8-pinu tālummaiņas kontrolieriem darbināt Sony EX sērijas kameras. Ideāli piemērots profesionāļiem.

Viltrox EF-E5 to nowoczesny, najnowszy model adaptera umożliwiający podłączenie obiektywów Canon EF i EF-s do aparatów bezlusterkowych z bagnetem Sony E. Wyposażony w styki obsługuje komunikację pomiędzy obiektywem a aparatem umożliwiając pewną pracę autofokusa, sterowanie przysłony obiektywu z poziomu aparatu, obsługę stabilizacji obrazu oraz przesyłanie danych EXIF. W odróżnieniu od starszych modeli posiada wyświetlacz OLED na którym obrazuje ogniskową, tryb przysłony oraz tryb Debug Mode umożliwiający mikro regulację AF znajdującymi się na boku obudowy przyciskami + i -. Po drugiej stronie obudowy mamy do dyspozycji przełącznik który umożliwia nam wybór trybu pracy autofokusa – pracy w oparciu o zasadę detekcji fazy lub kontrastu. Specyfikacja: Bagnet aparatu: Sony E Mocowanie obiektywu: Canon EF i EF-s Autofokus: tak Zdejmowana stopka statywowa z gwintem 1 cala Wymiary: 83mm × 72mm x 36,5 mm Waga: 158g

Introducing our Dual Focus Mode Adapter for Sony E-mount cameras from K&F Concept. Switch between C/P focus modes swiftly for enhanced focus speed and accuracy. With USB firmware upgrade technology, enjoy compatibility with new cameras and lenses. Achieve ultra-fast autofocus, gold-plated electronic contacts, and efficient signal conductivity for optimal communication between your camera and lens. Upgrade your shooting experience with this versatile adapter. 【 Auto Focus & Aperture Control】K&F Concept EF-E adapter comes with the Gold-Plating Contact, perfectly support high speed Auto Focus and can achieve rapid detection and accurate tracking images to realize greater photography effect, it greatly enhances conductivity and effectively transports EXIF Info 【 Electronical Adapter】Equipped with an Convert Bracket,which can be directly installed with a tripod head, and the bottom is designed with a 1/4 screw hole, which can be directly installed with a quick release plate. 【Support Lens Image Stabilizer】Support IS lens stabilization function. It makes your pictures in great sharpness in most of situations, whichever is moving, weak light, and night light. 【Wide Application】Compatible for Canon EOS EF EF-S mount D/SLR Lenses to Sony E-mount mirrorless cameras such as Sony E mount are A7/A9/A7S/A7 II/A7S II/A7R II/A7R/A5300/A6000/A6300 A6500;PXW-FX9、FX6、FX3、PXW-FS5M2、PXW-FS7M2、PXW-FS5. 【USB upgrade port】Through continuous software updates, K&F Concept will help users get better shooting experience, fix product bugs and constantly adapt to the new EF lens, provide more lens and camera combinations. Note: Auto focus is only in photo mode, NOT in video mode Canon EOS (EF / EF-S) D/SLR Lens to Sony E-Mount Mirrorless Cameras - Popular models include: Sony Alpha α7 I / II / III, α7R I / II / III / IV, α7S I / II / III, α9 I / II, α1 Sony Alpha α3000, α3500, α5000, α5100, α6000, m α6100, α6300, α6400, α6500, α6600 Sony Alpha NEX-3, NEX-C3, NEX-F3, NEX-3N, NEX-5, NEX-5N, NEX-5R, NEX-5T, NEX-6, NEX-7 Sony Smartshot QX1, QX10, QX30, QX100 Sony Security SNC-VB770, UMC-S3C Sony Handicam NEX-VG10, NEX-VG20, NEX-VG30, NEX-VG900 Sony NXCAM NEX-EA50, NEX-FS100, NEX-FS700, NEX-FS700R Sony XDCAM FS5, FS5 II, FS7, FS7 II, FX3, FX6, FX9 Sony CineAlta VENICE

Viltrox EF-E5 adapteris ļauj izmantot Canon EF/EF-S objektīvus uz Sony E-mount kamerām ar pilnu autofokusu un OLED displeju.

Meike MK EFTE C adapteris ļauj Canon EF/EF-S objektīvus izmantot Sony E stiprinājuma kamerās ar iebūvētiem maināmiem filtriem.

Viltrox EF E5 Canon EF/EF S to

The Rolux RL-CAGII battery holder is designed to power your Canon EOS C300 Mark II. You need to connect a v-mount battery (not included) to the RL-CAGII to create a reliable solution. V-mount batteries are known for their long battery life, which allows you to get the most out of your RL-CAGII. The v-mount batteries are secure in place, but they can be disassembled with one push on the button. Usage RL-CAGII You mount the RL-CAGII with a battery plate adapter on the rods your Canon EOS C300 Mark II. This adapter can be found under the optional accessories. Preparations have already been made for both the RL-CAGII and the battery plate adapter for quick and easy mounting. Only one cable needs to be connected and you are ready to use. The RL-CAGII is suitable for all common v-mount batteries. On the side of the RL-CAGII is a D-tap connection, to power your favorite accessories (e.g. an LED lamp).