Usb 485

Display the on-air status of each camera in your set configuration with the AVMATRIX Wireless Multi-Camera Tally Light System with six tally lamps. The system can wirelessly communicate from up to 200m away. Multiple interface connections on the tally box-from GPIO and USB Type-C to RS-232 and RS-485-create wide compatibility with various switchers and vMix software for integration with your preexisting gear setup. An included antenna can attach to the box to improve its signal. Key Features     1 x Tally Box, 6 x Tally Lamps     200m Wireless Transmission     GPIO, USB, RS-232/485 Interfaces     Compatible with vMix and Switchers     Front and Rear Lamp Indicators     Powered via USB Type-C or Battery     Includes Antenna, USB Type-C Cords     Carrying Case and Power Adapter Each tally light has a front and rear indicator light for its on-air status, as well as indicators to display the wireless signal strength and battery level. They can be powered via USB Type-C input or with a separately available 18650 lithium-ion battery. The bottom of each lamp has a 1/4"-20 thread for installation with a hot shoe to the top of a camera. Five USB Type-C cords, a GPIO connector, a power adapter, and a carrying case complete the system's accessories. Connectivity    Supports 433 MHz wireless or wired tally connection    Up to 200m line-of-sight wireless connection distance Tally Box    GPIO, USB Type-C, RS-485, and RS-232 interfaces    1-pin antenna input    GPIO compatible with AVMATRIX, Roland, Sony, NewTek, Panasonic, Datavideo, or other tally converter boxes    PTZ remote control via RS-232/RS-485 pass-through    USB Type-C input compatible with vMix software    Can support up to 16 tally lamps Tally Lamp    PTZ camera connection via RS-485 input    Front and rear indicators with four-level brightness adjustment    Signal strength and battery status indicators    Powered via USB Type-C input or with separately available 18650 lithium-ion battery    1/4"-20 thread for installation of hot shoe

Creality K2 Combo 3D PrinterThe Creality K2 Combo is a high-speed 3D printer with a CFS filament management system that allows printing up to 16 colors without manual filament changes. Its enclosed design, quiet operation (about 45 dB) and sturdy frame make it well suited for both home and workshop use. Print speed reaches 600 mm/s, and thanks to advanced stabilization, quality remains at a very high level.Multi-color printingThe K2 Combo was developed for creative multi-color and multi-material printing. The integrated CFS system automatically switches between filaments without any user intervention. It supports up to 4 CFS units, which means up to 16 different colors in a single print. The system is fully integrated with Creality OS and Creality Print software, making it easy to manage materials.Speed that goes hand in hand with qualityMaximum print speeds of up to 600 mm/sec and acceleration rates of up to 20,000 mm/sec² are thanks to the servo motion system. Thanks to its enclosed, rigid housing and stable guides, even at high speeds, details remain sharp and surfaces smooth. This is a good solution if you want fast prototyping without compromising on quality.Quiet operationThanks to the use of balanced fans and quiet servo motors, the printer operates with noise comparable to that of a laptop - about 45 dB. That's quiet enough to use it in a home office or studio without disrupting your daily routine.Smart features for user convenienceThe printer automatically levels the table, analyzing only the part on which the model will be placed. This reduces preparation time and increases the chance of a perfectly glued first layer. The system also detects printing errors, such as the formation of the so-called spaghetti effect, and informs the user.Design suitable for everyday useThe K2 Combo's chassis is made of aircraft-grade aluminum components, which translates into a durable and stable design. The working space of 260 × 260 × 260 mm allows you to create medium and larger models without the need to divide them into parts.Included 3D printer touchscreen spool holder filament PTFE tube power cord instruction manual nozzle cleaner cutting blade socket wrench imbus cutting pliers CFS system filament buffer Creality 485 cable (45 cm) Creality 485 cable (100 cm) quick start guide 3D printer Manufacturer Creality Model K2 Combo Printing technology FFF Print area 260 × 260 × 260 mm Device dimensions 404 × 436 × 545 mm Printing speed Up to 600 mm/sec Acceleration Up to 20,000 mm/s² Accuracy ±0.1 mm per 100 mm Extruder type Proximal two-speed extruder Filament diameter 1.75 mm Nozzle diameter 0.4 mm Max nozzle temperature Up to 300°C Max working table temperature Up to 100°C Working surface PEI spring steel construction plate Leveling method Automatic leveling Wireless connectivity Wi-Fi 2.4 GHz Built-in memory 8GB EMMC Rated power 1350 W/220 V, 450 W/110 V Voltage range 100-240 V~, 50/60 Hz Screen 4-inch color touch screen Supported filaments PLA, PETG, ABS, PLA-CF, PET Monitoring camera (AI) Standard configuration Resume after power loss Yes Air filter Yes Vibration optimization Yes Work chamber illumination Yes CFS system (automatic filament feeding) Yes CFS extension Up to 4 units Cutting software Creality Print 6.0 and later Supported languages Chinese, English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Japanese, Korean File transfer method USB drive / Wi-Fi Supported file formats G-code, 3MF CFS system Manufacturer Creality Product name CFS (Creality Filament System) Number of filament slots 4 Rated power 20 W Rated voltage DC 24 V Connectivity CFS: ≤4 Product dimensions 379 × 314 × 276 mm Weight 4.56 kg Status indicators 4 (one for each slot) Printing in multiple colors Supported Automatic filament switching Supported RFID tag reading Supported Filament end detection Supported Filament buffer Supported Moisture-resistant storage Yes, with moisture absorbers Compatible Films PLA, ABS, PETG, ASA, PET, PA-CF, P